coreone purge bin with wiper for 10x3mm magnets
A purge bin for the CoreONE system, equipped with a cutout for a wiper and designed to hold 3 10×3 mm magnets.
- Pobrania
- 77
- Polubienia
- 12
- Ocena
- 5
Liczymy pasujące modele…
A purge bin for the CoreONE system, equipped with a cutout for a wiper and designed to hold 3 10×3 mm magnets.
Remix of https://www.printables.com/model/205599-itty-bitty-fidget with 3 positions using 10x3 mm magnets
Mosquito Net Magnets. Magnets size: D: 10mm, H:3mm As the original, magnets are pressed into the holes and locket with glue(but personally, I use them without glue). The Windowmagnet can be glued on a strong adhesive tape, which is then…
Remix of ( https://www.thingiverse.com/thing:3337602 ) Modified to accept a 10x3mm magnet since I had more of those than the 8mm ones. Thanks to HEIados for including a very nicely done Fusion 360 file to work with! To get the 10mm magnet…
This is a remix of the Bambu Poop Chute by Fantasy3DPrintsShop , modified to suit my needs This uses 10x3mm magnets to attach to the metal plate on the back of the BambuLabs X1C, P1P and P1S. The support under the end where the magnets go…
Found @Edward's model for 10x3mm magnets, but the needed to redesign for spouse-factor. STLs provided for a few cable-bundle sizes. In theory, no support is needed – the magnet hole depths have a 0.3mm tolerance to allow for…
Honeycomb Storage Wall (HSW) insert magnets based in the original inserts of the model of RostaP. Combine with any HSW, and all existing accessories to bring a bit more of order to your kitchen (if put in the door or side), or to your…
Purge tray for the Prusa XL with three 10x3mm magnets embedded in the part. Sticks to the underside of the steel sheet. Pause the print at Z=3.2mm to add the magnets. Recommended to print using a material with high glass temperature, such…
I made these because I needed them. I use strong Neodymium 10x3mm magnets in many of my projects and I hope this model helps you. Please share pictures of what your wall looks like! Make sure you add super glue to the holes before putting…
Poop chute for Bambu Lab P1PP1SX1
This is a remix of the Magnetic Key Box by Michaël Fortin using 10x3mm magnets and also scaling down the width (only) of the sliding cover to 99% as the original I found to be too tight. Magnets should be placed at 4.2mm. The g-code…
Remix of the Buddy3D Cam Ball Joint Mount with magnets with very minor changes to use circular magnets that are 10x3mm, rather than the rectangular magnets of the original model.
A tool for placing magnets so that they are always the right way around. Uses a pair of 10x3mm magnets.
easy to print (bridging will be required and PETG or higher is recommended for best results. It's been printed and tested, i just haven't updated the picture just print and snap into place
Bambu Lab Y-Splitter for magnets 20x10x3mm. Normal and mirrored version.
A simple knob to put your magnets in so that they're easier to handle. Fusion 360 file included if you want to adjust for another magnet size.
Pegboard-able circles for mounting magnets or magnetic items. Like metal rulers or lite tools Made to have 8x3mm or 10
A simple stand to hold (press-fit) and display these 2022 General Mills Monster Cereals figures designed by pop artist KAWS. Holes for bases are 47x10x3mm. If you want a label or inlaid text on the base (as in the photos), use PrusaSlicer…
Admittedly this model slides down your whiteboard due to the weight of the markers but I keep mine at the bottom of the board anyway so it doesn't bother me. You could add rubber or stronger magnets, I guess. Print with the default…
I edited @AzJake's magnetic sharpie holder to accommodate three 10x3mm magnets because that is what I had. I made the three magnet holes 10.25mm x 3mm because I hate when friction fitted magnet holes or the magnets have tolerance issues…
Voici ma version du support a outils, que l'utilise pour ma CC2, Les aimants permette de la fixé sur la plaque gauche Imprimé en PETG couche de 0.2mm, Activé les supports Sur ce support j'accroche: Les 2 tournes vis fournie avec…
TIRED OF THROWING A PARTY AND SOME JABRONI TURNS OFF THE LIGHT SWITCH THAT POWERS YOUR SMART SWITCH BECAUSE YOUR RENTAL WAS BUILT IN 1875 AND HASN'T BEEN UPGRADED SO YOU DON'T HAVE OVERHEAD LIGHTS? AND YOUR LANDLORD HAS THE AUDACITY TO…
Heart Magnet 10x3mm fridge valentines day Use 10x3 magnet
możesz też użyć tego jako breloczka
Set a pause at 3.2 mm to insert the magnet. It has just a single .2 layer on each side of the magnet for strongest effect with the tradeoff the top layer to seal it in will look a little stringy
Redid the entire thread and kept the same design from the POSITIVE so that we can reuse the LID
i will update with real photo when done
Magpin v7 is my best iteration so far of my design. I use these everyday!
Thanks to DrAI for this lovely dovetail jig model. I remixed the 1:7 version to use 10x3mm magnets. Changed the hole size to 10x3mm (actual hole size 10.2 x 3mm). My magnets are 9.98 x 2.70mm (trymag from Amazon). They press in and hold…
For me, the 10x3 magnets were all a snug press-fit and no glue was required. But if they are loose or you want a little more security, a bit of CA glue will do the trick. I used these to mount a Hue strip inside my Prusa Mini enclosure.…
Ein einfacher Klappmagnet für zwei Magnete mit einer Dimension von 10x3mm.
This is a slightly modified version of Robert Cowan's Peggit - 5" Magnetic Screwdriver Holder , changed to use six 60x10x3mm magnets instead of six 60x10x5mm magnets. I found 60x10x3mm magnets to be more widely available, and about half…
Instead of two 10x60x3mm magnets, this model uses six 10x3mm magnets. Magnets can be super glued into place. Depending on the strength of your magnets, you may not need to use all six slots. Use tree supports.
It simply glues on to the Sharpie cap. The 10x3mm magnet should snap in snug, but a drop of glue may also be needed to hold it in.
Just a simple label for PLA+
Format: Length: 40mm Width: 20mm Height: 6.5mm Recommended text height: 2mm Required magnet size: 10mm by 3mm Placing the text: The text can be placed with any slicer but you find examples in the .3mf file. If you want the text to be on…
The 3 USB cables shown are the thickest I have and their diameters vary from one to the other, between approx. 3.4mm and 4.2mm. I made 2 stl files with slightly different dimension where one or the other flexed and grabbed on to the…
It simply glues on to the Sharpie cap. The 10x3mm magnet should snap in snug, but a drop of glue may also be needed to hold it in.
I didn't have any 8 x 3mm magnets, so I resized the holes to take 10 x 3mm magnets. The ones I have were a tight press fit.
TIRED OF THROWING A PARTY AND SOME JABRONI TURNS OFF THE LIGHT SWITCH THAT POWERS YOUR SMART SWITCH BECAUSE YOUR RENTAL WAS BUILT IN 1875 AND HASN'T BEEN UPGRADED SO YOU DON'T HAVE OVERHEAD LIGHTS? AND YOUR LANDLORD HAS THE AUDACITY TO…
Voici ma version du support a outils, que l'utilise pour ma CC2, Les aimants permette de la fixé sur la plaque gauche Imprimé en PETG couche de 0.2mm, Activé les supports Sur ce support j'accroche: Les 2 tournes vis fournie avec…
A simple stand to hold (press-fit) and display these 2022 General Mills Monster Cereals figures designed by pop artist KAWS. Holes for bases are 47x10x3mm. If you want a label or inlaid text on the base (as in the photos), use PrusaSlicer…
It simply glues on to the Sharpie cap. The 10x3mm magnet should snap in snug, but a drop of glue may also be needed to hold it in.