270 modeli
Meet CUTE - C hristmas U nique T emplates E dition ⭐ Designed as 2 in 1 - cut your cookies with details or just an outline. Outer cutter has also beveled edges for easier cutting. Min. dough thickness for inner detail to be visible should…
Wydruk około 1,33 €–1,62 € nettoWstępna wycena jednego wariantu
Um zu erkennen ob die Radschrauben meines Wohnwagens sich gelockert haben bzw. gelockert wurden habe ich diese Indikatoren designed. Mit der Hilfe sieht man auf den ersten Blick ob mit den Radschrauben alles in Ordnung ist. Die…
Wydruk około 0,79 €–0,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is the Village set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's name, but any…
This model is compatible with the lego system.
This model is compatible with the lego system.
Print with support sadly and 100% infill to give it rigidity.
This model is compatible with the lego system.
Dyson Mini Turbo 967479-01 96747901 belt housing part T112750 supports needed This part was broken when the mini turbo brush of my Dyson V9 started to rattle I printed it in PLA and after a year it is still going strong Category:…
This model is compatible with the lego system.
Material : PET-G Support : Yes Infill : 10 - 15 % I printed from PET-G, but it will not be a problem to print from PLA. The layer height was 0,2 mm. It was printed only with supports on the printing pad! If you put supports everywhere,…
This model is compatible with the lego system.
This is a Honeycomb Storage Wall mount for DeWalt DCB112 Charger. The three hexagons on the back are meant to go into insert-empty.stl and on to your Honeycomb Storage Wall. I printed at 0.3 layer height with support from build plate…
This model is compatible with the lego system.
(DE) Chip für den Einkaufswagen. Im “112 Notruf Stil” und sehr kurzer Druckzeit. Extrem stabil am Schlüsselbund und dennoch grazil. Auch als Give-Away für verschiedenste Situationen zu verwenden, da schnell und billig herzustellen. (EN)…
This model is compatible with the lego system.
This model is compatible with the lego system.
Use to mount the charger to a surface using screws
Das ist eine Spurplatte die für VAG Modelle mit einem 5x112 Lochkreis. gedruckt mit 100% infill die Spurplatte ist nicht im Straßenverkehr zugelassen!!! Nur zum Testen, welche Größe man an Spurplatten braucht, um danach zu wissen, welche…
This model is compatible with the lego system.
Hexagonal junction box with plain screwed lid - Cassetta di derivazione esagonale con coperchio basso a vite External dimensions - Dimensioni Esterne 112x100x50mm Surface-mounting enclosure Suitable for: Resize to adjust dimension All our…
This is a small protective cover designed for the Knipex side cutter 78 03 125 (without lead catcher). When applied, the cover locks the pliers in the closed position, ensuring safety and convenience during storage or transport. Printing…
Multiboard push in style mount for DCB112/115 (center to center peg spacing of 114.3 mm). Included the STL and STEP (with parts split) file if needed for modification.
This model is compatible with the lego system.
Four boxes as an insert organizer for the Systaner³ SYS3 M 112 suitcase. Model info: Variant A and Variant B are available, refer picture. (Note: box 1 and box 2 are the same for both variants (A, B)) Print settings: 🖨⚙ Material: PLA…
Gridfinity Knipex 7881125 side cutter Seitenschneider 2x4 grids. See all my tools https://www.printables.com/@MatthiasHart_2387670
A small ammo box made from a Peli 1120. Compartment files for 40 rounds of .223, 40 rounds of 9 mm and 50 rounds of .22LR. You can of course also configure it differently, for example three compartments of only .223 for 120 rounds. Just…
Changed my design to use the Sy's peglock system which is better pegs and more modular
Einfacher Ständer für externe USB Festplatten. Unten am Boden kann man kleine Plättchen aus Gummi oder Filz anbringen. Für eine maximale Festplattengröße von 110 mm Länge und 22mm Dicke. Versionen, für 4, 5 oder 6 Festplatten. Gedruckt…
I had a side project needing a 20v source at a time when name brand chargers were unavailable except at scalper prices. The Elefly DCB112 solved the charging need very well for $20. But annoyingly and surprisingly it doesn't have a built…
Für den Druck habe ich PETG Prusament verwendent. Nun schon einige Monate im Fahrzeug verbaut und hält ohne Probleme. Ich habe es auf meinem Prusa XL Multi Tool gedruckt mit standard Einstellungen. Die zwei Nasen habe ich nach dem Druck…
This model is compatible with the lego system.
Simple replacement part, when someone lost this part or when it broke.
This model is compatible with the lego system.
This model is compatible with the lego system.
This is the Fortress set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's name, but any…
This model is compatible with the lego system.
Print in High Temperature filament like PETG or ABS or better ------------------------------------------------------------------------------------- Bought a broken mixer of Marketplace for dirt cheap, hoping I could fix it. Found that the…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Print your own Lego train from the set "10361 Holiday Express Train" just right now! After a while I've got an idea, what if the piece going to be done by a fan, before Lego even releases it? Ha-ha, that was a nice funny challenge!…
This model is compatible with the lego system.
Before you go further! This project is for personal use only. Any commercial use is forbidden Follow me on Instagram to keep up with latest designs Check out this project's Instagram - @StawiamKlocki.pl Read FAQ Follow MOC designer on…
This model is compatible with the lego system.
This model is compatible with the lego system.
DeWalt 20v battery charger DCB112 mount for Ikea Skadis board that uses T-Clips to securely fix it to the board. This mount also secures the charger with the raised bottom holes to prevent it from detaching when removing the battery.
This model is compatible with the lego system.
This is a remake of the M1126 IVC. I opened the slats, they are see through now..
(Imported from my models on Thingiverse: https://www.thingiverse.com/muchtall/designs ) I have a Ridgid R4514 Pro 10 in. Jobsite Table Saw, on which I broke the little springed sliding retaining fingers off the fence slide while removing…
This model is compatible with the lego system.
3D Printed Enclosure for CP2112 Module Description: A two-part enclosure designed to securely house the CP2112 HID USB to SMBus/I2C master bridge module. The design includes precise cutouts for the USB connector, pin headers. Material:…
This model is compatible with the lego system.
Distanzsscheibe zum testen, welche Dimension man bestellen muss. NICHT IM BEREIECH DER STVZO ZUGELASSEN! Nur zum testen welche Dimension an Spurplatte bestellt werden muss. Lochkreis 5x112 und mittenzentrierung 66,6mm. Passend für viele…
Used to mount Dewalt battery charger DCB112. Requires: Heavy duty snap: https://thangs.com/designer/Multiboard/3d-model/Heavy%20Weight-Bearing%20Hook%20Snap-1130430 Mid Hole Bolt:…
Realice este modelo para quienes necesitan imprimir números
Have to print slowly external perimeter and with 20% infill. If you need a different logo, feel free to contact me and I will create exactly what you need.
This model is compatible with the lego system.
Pipe for the math spinner 32mm diameter 112mm long 2.5mm wall thickness Made for the Sunlu giveaway. Maybe use a brim to make sure it does not fall over.
A friend asked for “Hera's boot pistol” from Star Wars Rebels. The models I found were WAY oversized for a boot pistol and didn't have articulated triggers. I modeled it after the picture on the one on Wookiepedia:…
This model is compatible with the lego system.
Come support these models over on Patreon Buy my time, Not my models. Easy to print Bronekater 1124 patrol boat, 1/100 scale, will want some greebling if scaled up. Some details have been changed for looks/ printability. The bottom most…
A few parts for my Craftsman Bench Grinder. Bulb shade is extended so one can use automotive blinker bulbs. Glue some aluminum foil inside to act as a reflector. Bulb Shade - Part #21126025 Knob - Part #21126010 Tool Rest - Part #21126035…
🛠 Technical Specifications Wingspan: 1120 mm Length: 680 mm Wing Area: 21.56 dm² Airfoil Profile: NACA 2410 Target AUW (All-Up Weight): ~1200g (+100g) 📦 Hardware & Reinforcement Required Main Wing Spar: 6mm x 900mm Rod (1x) Secondary Wing…
PVC Pipe Joint 112.5x90x27mm-OSE I'm using off the shelf 90degx90degx27mm corner joints and PVC pipe to make a frame covered in a home made tent skin to create an indoor cubby house for my grandkids, but I could not get 135degx90degx27mm…
I designed it ultralight and found the glowing filament ideal. I'm not sure if upscaling fits bigger pliers. But feel free to try.
Add a touch of humor to your home with this creative 3D model inspired by the legendary "La Linea - Balum Balum" animation from the 70s! The minimalist yet expressive character appears to interact with the switch, socket, or button,…
I remixed this from https://www.thingiverse.com/thing:3108158 for my friends polaris rzr unfortunately the newer models have different style hubcaps (part# #1521128 for stock alloy wheels) fits these models Enjoy!
If you lost your whole clip, you can replace it with this one. Dr. Oetker 1123 Rechteck-Springform mit Haube 38 x 25 cm
This is the Wither set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's name, but any…
This model is compatible with the lego system.
This is a drawer I designed for small parts like screws and electrical components for arduino It has various configurations of boxes for your needs ( with 9,6,3,2 and 1 compartments) Needs no supports 112x112x29mm inner box size takes…
A3 front logo size 273 mm Number plate holder 112mm
Republishing a part that saved me some $$$ for my dyson repair. This design have been in my dyson since a year now and still working like new to this date. Thanks to Sulya for designing this one. *** Dyson Mini Turbo 967479-01 96747901…
Ein Ersatzteil für die Pfaff Nähmaschinen der Tipmatic-Reihe. Auf den Bildern zu sehen ist der originale Garnrollenhalter von Pfaff. Mein Teil kann diesen ersetzen. - A spare part for the Pfaff sewing machines of the Tipmatic series. The…
This model is compatible with the lego system.
étui pince coupante knipex 7861125
Diese 3D-Modelle bilden DDR-Überflurhydranten Ausführung A nach dem Standard TGL 11238/01 (November 1970) im Maßstab 1:100 nach. Verfügbare Varianten - NW 80 2xC_1xB (Original nach TGL von 1970) - NW 80 2xC (ohne unteren Abgang) - NW 80…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** Have you ever wished you could store your coin cell batteries in a neat and…
Inspired by the U.S. Army’s M1120 HEMTT Load Handling System (LHS), this low-poly logistics truck combines rugged military design with clean, printable geometry. Designed to print easily and assemble without glue, it’s perfect for…
A Peli 1120 Case Divider set for SK .22 allowing for 16 boxes of ammo to be transported without allowing the remaining cases to rattle around inside the box. Designed to be printed with a 0.6mm nozzle, with extrusion width of 0.8mm and 2…
Remixed u:rjm2112's nice design to accommodate a couple more colors. Use a high infill like 70% to prevent infill artifacts from showing on the top surface. Print at 0.2 mm layer height. Color change heights are shown in the slicer…
Wall mount for Zyxel NWA5120 and NWA1123 Series WLAN Access Points
This model is compatible with the lego system.
Split ergonomic computer keyboard. Features adjustable per-finger column stagger, adjustable per-finger splay angle, independent and easily replaceable components. Designed to hold Kailh Choc key switches using Kailh hot-swap sockets.…
This model is compatible with the lego system.
Bloques compatibles con sets lego Basic-brick
M1126 Stryker Infantry Carrier Vehicle Wall Art Silhouette model. Adjustable size. I accept model suggestions
Panel snugly fits into a pelican 1120 case. Small rechargeable battery pack underneath (held in place with 3m double sided adhesive)/ I remove the panel to recharge. Key arms the box and turns on the green LED. The Key also has the…
Your best bet for printing this is with a really small layer height, I used 0.08mm layer height. I used organic supports with an agressive support angle and make sure to turn off “remove small overhangs”
My daughter wanted more slides for her Lego sets, but couldn't find any to buy, nor ANY stls to print, so I made my own. It took an ungodly amount of time and some serious frustration along the way to make it. It's not perfect, but it…
This is my version of the Knipex Skadis holder. Did a few changes to it, so it can be printed in the standing Prints very easy…only the peg needs support, the rest can be printed without supports. Printed it in 0.2mm layer height.
compatible parts for metal screw kit merkur M3.5 screws
Is designed to go inside of 112mm hole. inner diameter of cover is 110mm Flange diameter is 140mm For wall/ceiling
I remixed this from https://www.thingiverse.com/thing:3108158 for my friends Polaris razor unfortunately the newer models have different style hubcaps (part# #1521128 for stock alloy wheels) fits these models Enjoy! This model features…
https://www.amazon.com/uxcell-Micro-2800-2900RPM-Remote-Control/dp/B07M5JN8GW/ref=asc_df_B07M5JN8GW?tag=bingshoppinga-20&linkCode=df0&hvadid=80127100217092&hvnetw=o&hvqmt=e&hvbmt=be&hvdev=c&hvlocint=&hvlocphy=89611&hvtargid=pla-45837265637…
Scale up/down as needed! Simple replacement belt that interchanges with Bissel Part Number 3031120 that can be printed in TPE/TPU. This belt is a little thicker than the original, FreeCAD file included if you would like to adjust. Printed…
The Oil-Cap of my Chain Saw Dolmar 112 was broken. So I´ve built a new one. It also should fit on Makita Chain Saws. the cap is made of PETG, 0.2 mm Layer, 25% Infill, the seal is made of ninjaflex, 0.2 mm Layer, 100% Infill
I created gridfinity storages for the Proxxon 23112 3/8 Ratchet and sockets. I forgot to take a photo from the 19 sparkplug socket gridfinity, but it's there ;) The gridfinity isn't stackable. All items are 3 cm high. This gives them a…
MOD. AUTOBIANCHI A112 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
A gridfinity holder for an OLFA 112B scissors that's 5x1x6 units. It's not stackable while the scissors are in there, but there is the usual lip for stacking when empty.
