Mercedes C123 Coupé Wall Art
Very nice and classy Mercedes C123 Coupé Wall Art.size can be customized as wanted Accept suggestions for my next models
Wydruk około 1,88 €–2,30 € nettoWstępna wycena jednego wariantu
- Pobrania
- 142
- Polubienia
- 25
- Ocena
- 5
369 modeli
Very nice and classy Mercedes C123 Coupé Wall Art.size can be customized as wanted Accept suggestions for my next models
Wydruk około 1,88 €–2,30 € nettoWstępna wycena jednego wariantu
Print-in-Place Hinged Box for 4x CR123A Batteries Compact, one-handed operation storage box for 4 CR123A batteries (or CR123 or RCR123A or 16340) with an integrated hinge. Optimized for one handed use. Materials needed: 2 x magnets (size…
Wydruk około 1,74 €–2,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Žáci mohou s pomocí nástavby, vyrobené 3D tiskem, proměnit VEX 123 robota v malý “mobilní ploter” a vytvářet zajímavé obrazce - viz přílohy.
Wydruk około 2,33 €–2,84 € nettoWstępna wycena jednego wariantu
123 block stands vertical and horizontal I found my blocks to be a little off in measurements so the tolerance of the stands might be different if you have higher quality 123 blocks. horizontal stand internal measurement length 78.2mm…
Wydruk około 0,51 €–0,63 € nettoWstępna wycena jednego wariantu
Vytvořili jsme rozšiřující spoj pro herní pole robotů VEX 123, který řeší problém se sklouzáváním robotů při práci s jedním blokem. Často se totiž stává, že robot sjede z pole a zastaví se. Firma se pokusila tento problém řešit přidáním…
Wydruk około 1,15 €–1,41 € nettoWstępna wycena jednego wariantu
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Wydruk około 3,82 €–4,67 € nettoWstępna wycena jednego wariantu
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Wydruk około 3,82 €–4,67 € nettoWstępna wycena jednego wariantu
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Wydruk około 3,82 €–4,67 € nettoWstępna wycena jednego wariantu
The status light is still visible through the hole. Printed in PLA 0.2mm layer height 50% infill No supports needed
Wydruk około 3,59 €–4,38 € nettoWstępna wycena jednego wariantu
The original battery cover on the VEX 123 Coder uses a screw. This design simply pops into place, no screw required. Recommended print settings: Layer Height: 0.2 mm or less Infill % : 15 Supports: Yes Support Type: Organic/Tree, on build…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
These are storage trays for different common batteries designed for the Gridfinity organization system by ZackFreedman These were all made using the Gridfinity Rebuilt project. I also increased the detail of the models beyond the default…
Update on Jan 25, 2026: Partial Height Bins are now available for CR2 & CR123A batteries. AA and AAA bins have also been revised to have an additional compartment. High-capacity bins have also been added. Gridfinity Stackable Storage for…
Based on the block template i designed some gridfinity battery holders i couldn't find online (at least not in this dense packing). Fusion files and STLs included for these batteries 40x LR44 8x/11x/14x CR123(A) 20x CR2032 12x CR1632 Note…
Variety of pegboard hooks with included sourcecode. These pegboard hooks are designed to work with standard 1-inch center-to-center pegboard with 0.25-inch holes. The design includes one tight fitting peg which improves their strength and…
Mechanical Movement 123 What is it? -This is a device that is designed to turn rotary motion into linear motion. It does this by having to drive gears engage with the rack at opposite times, in turn pulling the rack back and forth. The…
Well, The dividers are overkill at 1.2mm, but it works really well sized for either a 0.4 or a 0.6 nozzle. I use the 0.6 nozzle. The previous version with grid/square like separators won't bind with the case well enough. The waves are the…
Simple Battery Holder. CR123 batteries are very dangerous floating around in a bag. This case keeps them isolated and safe. Sliding lid snaps in place.
A small case with a push fit lid to fit a pair of CR123 3V batteries. Handy to have around for those cameras that require them - I've found that not all bodies are honest when reporting remaining battery levels and it's useful to have a…
Adapter to use the easier to find CR123A batteries in place of a CRP2 battery. Printed in PLA on a Prusa Mini with .2mm layer height and 20% infill. Bend a paperclip as shown to make a connection. Tested to work in my older Nikon N6006…
Second set of Sonic figures based on Team Dark. Set includes... · Shadow (may make a second version with a less intrusive support pole) · Rouge · E123-Omega, Replacement Minigun, Base, and Outer Base (STILL PAINTING WILL UPDATE PICTURES…
Pallet inspired by Stackable Crates by rodrigorosseto to hold a ground set of six, but the crates are stackable (not so much the pallets, it has a smooth bottom) Pallet has 2 versions, complete STL if you love supports, and a Top/Bottom…
Halfway through the print pause your printer and add 1-2 small spit shot weights to make the rattle inside. Once printing complete add three small split rings and two treble hooks. Happy catching!
CR123 - CR123a Battery Storage Box [AAA version here: https://www.printables.com/model/903130-improved-aaa-battery-rugged-box ] [AA version here: https://www.printables.com/model/903125-improved-aa-battery-rugged-box ] Liked the design…
the 123 block holders I've found for gridfinity were a bit loose of a fit and short this one holds then in place a bit better 123 blocks
Holds two CR123A batteries and clips into Magpul MOE pistol grips. Use TPU with 100% infill for the plug. I tried Overture TPU 95A and NinjaFlex 85A. I printed the main core in Overture Easy Nylon and PolyMaker PolyMax PLA. Both worked…
Remixed Ram Base with better -123 o-ring groove geometry so it prints nicer vertically. Changelog: 4-20-2025: Added STEP and F3D source files for CAD users.
can be printed together the model needs to be glued together or separately in other colours the Hs 123 is very realistic Print in place kit card , Assembly required need to use a support
I made a simple interlocking battery organizer for one of my drawers. The trays are 156mm wide (6.14 in). Battery Types: AAA, AA, C, D, 9V, CR123
Snap-fit lidded case for 4 CR123A batteries with capacity indicators.
This model is compatible with the lego system.
This model is compatible with the lego system.
This should protect the batteries from the elements. It didn't take on any water when I ran them under water for 1 min and I could even submerge them in the sink. I would add an O-ring if you want them to be completely waterproof however.…
-– == Update 06/37/2023 == – You may need to adjust x-y scale by +-/1-2% to account for the variation of battery sizes. I have printed 30+ holders and only had to do this one or two times. –-== Original image ==-- -- == Vase-mode battery…
So you have an MMU now? And you don't want to print something too complex yet, because you want to make sure everything is just right? No problem. Print this. It takes 30 minutes on an MK4, and 24 tool changes, so that when you are done,…
Fits 2 123 blocks in a 1x3 Gridfinity pattern, magnet holes removed
Stackable Gridfinity battery bins. A 1x1x5 bin that fits 9 batteries laying down, this bin is directly stackable. A 1x1x3 bin that fits 8 batteries standing up, in order to be stacked it requires a 1x1x3 spacer A 1x1x3 spacer. NOTE: The…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION !!! Hello Everyone I have designed battery holders for CR123A / RCR123A / 16340 batteries using ready-made contact plates, which can be purchased…
Support free. I added a knurled version of the lid for the two block box using negative volumes in prusaslicer. Hopefully that makes them easier to open. The lids are intended to have tight tolerances so that they may wear in and have…
CR123A batteries are cheaper and easier to find than CR-P2 or 223A batteries, so this adapter connects the CR123As into a unit that is compatible with CR-P2 devices such as cameras. It requires a paper clip bent in a specific way to…
This is a dummy battery for CR123A very usefull when you need to connect an external power sorce. On one side you have a M3x10 on the other M4x10.
My take on a battery holder. Inspired by https://www.printables.com/model/346261-aa-and-aaa-battery-holders-2-4-8-12-16-packs but uses no elements of the design.
I rebuilt my kallax shelf and wanted to put my drawers and doors back in but realized I didn't have the spacer. I tried to see if anyone had a .stl that I could print quickly but weirdly no one did. I emailed IKEA and they mailed me the…
WALLMAOUNT FOR BOSH GAL 1230 CV HOLDER CHARGER
A simple battery holder for CR123A batteries. This model uses two Keystone 204 contacts. Press the battery contacts into place. They should fit snugly without the need for glue.
This model is compatible with the lego system.
Scale to 50% Customized version of https://www.thingiverse.com/thing:2633015 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2633015 Instructions Using the following options: inside_diameter = 29.82…
A large loading coil for a portable vertical antenna with a 123 uH potential inductance. The coil is about a foot long and 3 inches in diameter (305mm x 75mm). A clamp-on tripod is included. The model is designed for use with 16 awg solid…
Modelled these Lid Props for my Fluval Flex 123l. For My configuration you need to print: -2x Fluval Flex 123l Front -2x Fluval Flex 123l Corner
Battery Caddy that holds 6 CR123A batteries. Original model created by @Fatman_289047 I just resized it for the CR123A
Case for CR123A or equivalent 16340 rechargeable batteries. Internal dimensions: 34 mm (+0.6 mm for battery pin) x 17.2 mm (diameter). Please note that some 16340 rechargeable batteries may not fit, particularly those with a USB-C port.…
Inspired by Zoids design, however i wanted it on a 4U height base and added some chamfers. No one appears to share f3d or step files so added that in in case anyone has specific requirements and avoid having to start from scratch like me.
Simple replacement part, when someone lost this part or when it broke.
ENG A very useful CR123A/CR123 Battery Holder If you like it and you want to support my work, please donate here: https://paypal.me/StefanoUnga ITA Un contenitore di batterie CR123A / CR123, molto utile per riporle in maniera accurata e…
Simple stand for hotwheels cars. the width of the stand is 123mm. for car models placed in a plastic transparent blister
Do you need a 1-2-3 inch block to use in your shop? This model has you covered. Do you need a 1-2-3 centimeter block to use in your shop? This model has you covered. Do you need a 1-1-17 inch block to use in your shop for some reason? We…
You can buy these from me here! If you like our models, consider giving us a 1 time donation! I print these using a 0.6mm nozzle with 0.2mm layer height using PETG They are very durable!
123 block storage for 2 blocks. About 1 mm clearance all around for each block. Print Settings: Polymaker Polyterra PLA in matte white 15 percent infill, 3 perimeters
The 7.62 x 39mm Ammo Can Label Stencils! - 122gr - 123gr I recommend white paint, but of course its up to you and what color your storage container is! Enjoy!
Model of panel and clips for the top center console. This remix features 5 slots for switches and a non-visible mounting method. The clips can be glued to the backside with superglue for a clean installation. I printed it on a textured…
1 2 3 block holder. The tool holder module couples with the attachment plate module, print one of each and you have what you need to hang a 1 2 3 block. 1 2 3 block size 2-15/16 x 1-15/16 x 63/64" (75x50x25mm). MODULA - a module based…
Buttons transfer panel for Niva Chevrolet VAZ-2123. Material: PETG
Simple battery trays for CR123 batteries compatible with the gridfinity system. The trays can be generated for any size of tubular battery by a CadQuery program. Just specify the size of the tray in gridfinity units and the size of the…
This is a model of Mercedes seal clip for W123 Coupe model, part number A0009871015 (for reference only). Measurements taken from an original part (see photo). I've used PLA for a prototype, then ASA for the final version, but I think…
A minimalist door hanger for a bathroom or shower room, designed in the iconic single-line style known from the 1970s cartoon “La Linea.” The simple, playful silhouette and clear shower symbol make it perfect for homes, hotels, gyms, or…
This is a personal design. The Miter Saw Handle Fits a Craftsman Model #137212370, I printed this with 6 walls and 98% infill using PETG on a Creality Ender 3 Pro. This was my first time using CAD any tips would be welcome. Fill free to…
Key case for Mercedes Benz Key W123 without pause. (If you need with a pause look at my Acc!)
I needed a few trim clips for my E30 and didn't want to order them. Prints well in PETG or stronger material. Also, print sideways for strength and add support material
Update 4-17-26: added 115 variant Update 10-24-24: added 016 variant Printable O-rings that are sized at 012 and 123. This was made specifically for the LHTCU. This will drastically reduce performance compared to real O-rings. Use a…
IKEA Vilmar 123663 Ersatz-Stuhlgestell /Replacement Chair Stand Print Settings Rafts: Doesn't Matter Supports: No Resolution: 0,2 Infill: 15% Material: TPU → erhöht den Sitzkomfort ist aber schwieriger zu drucken. ;-) TPU → increases…
Will hold two CR123a or a single 18650
A holder for 5x CR123A 3V batteries that fits in a standard size Altoid tin.
This is a simple screw-top case designed to hold two CR123 batteries or a single 16650 battery. It's a great way to keep a couple of spare batteries handy for your flashlight or other portable electronic device without the risk of them…
A spacer for Gaggia Grinder RI8123/01 MD15 This is a spacer u can easily put in the top part of the grinder between the plastic and the metal cylinder. just unscrew the two little screws that keep the two parts together and place it in…
Info: The holes for the candles are 22mm and 250mm print hight is needed. Print Settings: 0.2mm or finer Layer hight (especially for the no. 3) PLA 3 walls/perimters 15% Gyroid Support Auto-Tree (but the outside of no. 4 looks not so nice…
Xiaomi Mi Temperatur Sensor LYWSD03MMC-z Batterie Mod von CR2032 auf CR123A und Magnet-Halter (Optional) Ich habe den Mi-Sensor von Bluetooth auf Zigbee geflasht um das Teil problemlos in mein Smarthome zu Integrieren. Da nach dem Flashen…
Realice este modelo para quienes necesitan imprimir números
Holder for a pocket multimeter UT123T UNI-T. It uses two universal pegs ( https://www.printables.com/cs/model/635620-skadis-skadis-universal-peg) to mount to Skadis so no need for supports. I printed using PET-G. Can be used while mounted…
For some reason there's zero resources of this on this platform, at this point at least, this is the file you add to the slicer for it to display print bed (build plate) model. You import it under Printer Settings > General > Bed Shape…
Bateriju maciņš priekš CR123A. Izgatavots no ABS vai ASA un blīves no TPU.
A holder to securely hold two heavy 123 blocks for HSW.
This is a replacement adjustment bolt for the bowden cable that sets the shift points for the automatic transmission in the mercedes benz 300T/C/D w123 models with the OM617 engine. The slot in the side is so it can be installed without…
I made this 3 x 5 x 4u bin to replace the case all the bolts came in. This is for a Kadrick 1230 Pcs M2 M3 M4 M5 Metric Screw Assortment, 4mm-20mm 304 Stainless Steel Hex Socket Button Head Cap Bolts Nuts Washers Kit with 4 Hex Wrenches.…
This rugged box remix is created to be carried around with CR123 batteries in it. The lid model must be padded with 5mm foam. It prevents batteries from rattling.
Discover practicality and functionality in this 3D printable 123 block featuring 7/16" diameter holes. Perfect for a range of DIY projects, this block offers versatility without the need for precision machinery. Whether you're a beginner…
Meet CUTE - C hristmas U nique T emplates E dition ⭐ Designed as 2 in 1 - cut your cookies with details or just an outline. Outer cutter has also beveled edges for easier cutting. Min. dough thickness for inner detail to be visible should…
This uses the standard 3/8-16 thread to create a line lock base out of machinist 123blocks. Use an M3 screw 16-20mm. This provides the strength to hold the loc-line. Printed at 0.15mm height and a 5mm brim. No supports needed.
The model should be printed in vase mode. Only 2.4gr / 0.79m of PETG is required to print it.
I'm designing a SKAID panel to hold all my batteries, flashlights, battery chargers and walkie talkies. These are 4 of the battery pack holders I've designed and printed. Friction fit for the packs and as low profile as I could make them.…
Hi ! I finally received my tester ESR T4 from Aliexpress, I started looking for a box for this small circuit. After having printed and tested several boxes, I was disappointed because they were either difficult to print or not very…
Battery holder for CR123a using these contacts: https://www.amazon.com/dp/B0B1ZJ8PNH
The ridges make it easier to grip when wearing gloves.
Warning IMPORTANT: Using the switched fillament guide with very high models crashes the extruder! Please be aware of that! I am planning to update the model as soon as possible to remove this issue. Motivation After my original and…
75mm Metric 123 Block Sides 25mm, 50mm and 75mm respectively, while not being a true precision ground 123 block if printed on a dialed in printer the dimensions can be relatively accurate and useful. I would reccomend printing with…
A durable plastic fastener designed to securely lock the hood prop rod in place. Resistant to engine vibrations and high temperature changes.
This adapter allows you to use your CR2 Batteries in device where A CR123a Battery is needed. all you need is a M4x6mm screw
Import the lid and text into slicer. Center to build plate, and select which filament to use for each. Now you can easily see what batteries are in the case.