Wyniki wyszukiwania: 200mm

Sortowanie

548 modeli

Rectangular 140x200mm Stacking Baskets & Lid - Hexagon Pattern

This space saving hexagon pattern basket system should do the job! Just print and forget, remember to turn the speed down if needed. You can stack baskets on each other with or without the lid - They stack BOTH ways!

Pobrania
16 869
Polubienia
4158
Ocena
4,95
P
PrintablesMax

Funnels. Various sizes 25mm to 200mm

Many different sized funnels. With the top diameter starting at 25mm and going up to 200mm. Each with multiple appropriately sized bottom/nozzle sizes. The models are grouped by the top diameter size. If any of these don't suit you you…

Pobrania
7280
Polubienia
2129
Ocena
4,91
P
PrintablesMAQUINA

IKEA SKADIS PEGBOARD 200X200MM / 360X360MM

3D MODEL DESCRIPTION Since the space of my desk getting lesser and lesser… so I have think of a effective way to re-organise all the tools and other stuffs… Pegboard is a fancy way to keep the things organised as we can mix’n’match the…

Pobrania
6311
Polubienia
696
Ocena
4,71
P
PrintablesHobby Hoarder

Bed leveling squares (200x200mm)

You can use these squares to easily level your bed. Print them out and then adjust each corner individually. If the surface is rough, lower that corner and if it's not sticking at all or you see gaps between the lines, then raise that…

Pobrania
3623
Polubienia
88
Ocena
5
P
PrintablesNiiskar

Lockable hole distance measurer with scale (20mm - 200mm) [v1.1]

I always struggled with drilling the holes for wall mounts and pictures. With this handy tool, you can measure the distance between the holes of the thing you want to mount and can lock it in place with the knob. To achieve the perfect…

Pobrania
3328
Polubienia
2423
Ocena
4,79
P
PrintablesDangineering

Rotary bearings 200mm---> 608Z

Trying my hand at making a robot dog and needed a thin bearing for my cycloidal drive, but didn't want to break the bank in just bearings alone. Hence I decided to design one I could use with just some standard 4.5mm steel BBs. Print…

Pobrania
2741
Polubienia
669
Ocena
4,93
P
PrintablesOscar Creator

Bag Clip (60-200mm)

Bag Clip designed with print-ability in mind, it has rounded corners to better stick to the print-bed and comes with custom support which just snaps of after printing. Model comes in sizes between 60 to 200mm and exists with and without…

Pobrania
2590
Polubienia
315
Ocena
4,89
P
Printableskleenecks

IKEA Skadis (200x200mm)

IKEA Skadis inspired (compatible) peg board that takes up 200x200mm.

Pobrania
2421
Polubienia
376
Ocena
5
P
Printablespixelwave

200mm Fan Front for Fractal Node 304

Featured in “Wolfgang's Channel” channel: This is a custom front design to fit a 200mm Fan with custom 3mm mesh or dust filter for the Fractal Node 304 Case. I am using a 200mm Noctua fan (Noctua NF-A20 PWM chromax.black.swap) that only…

Pobrania
2078
Polubienia
137
Ocena
4,71
P
PrintablesCrazy3D

Ultra Articulated snake - new design 200mm and 350mm lenght

Now - here the design of my articulated snake, which is not that spiky anymore and in common sizes for fast prints. On my Elegoo Neptune 4+ the 200mm snake took 1h to print, the 350mm snake 2h. The joints are the improved one from the…

Pobrania
2068
Polubienia
93
Ocena
5
P
Printablesbce.gatien

Pantograph 200mm, 250mm, 300mm

This is a Pantograph. It is used to copy a drawing at a scale, usually 50% (1/2). Simply follow the contour of the object or drawing to duplicate it at scale. Can be use to follow the contour of a part to transfer it on paper at scale.…

Pobrania
1400
Polubienia
908
Ocena
5
P
Printableskjbturok

Table leg extension Ikea Lack (50MM-200MM HIGH)

Three simple models to extend the height of the Ikea Lack table. Extensions range from 50mm to 200mm high. As each printer is a world, I include a dimension test that I recommend to print before to check that the extension really fits in…

Pobrania
1186
Polubienia
257
Ocena
5
P
PrintablesNiH

Glamdring - prop replica 1200mm

Replica of Gandalf's sword Glamdring featured in the LOTR movies. This is a work in progress. As of initial publication some things are still missing or represented in simplified ways. The runes on the chamfered part of the hilt are not…

Pobrania
1136
Polubienia
183
Ocena
5
P
PrintablesMax

Off center Funnels. Various sizes 25mm to 200mm

Many different sized funnels with off center spouts. This allows access in to areas that might otherwise be difficult to access. With the top diameter starting at 25mm and going up to 200mm. Each with multiple appropriately sized…

Pobrania
925
Polubienia
146
Ocena
5
P
PrintablesMetikumi

Snap-in Pipe Clamps (Rev. B) – 20-200mm – 0.8-5.5in

Welcome to the improved revision of my snap-in pipe clamp design, now with more diameters and additional wall distances! This versatile design is optimized for the FFF process with various filaments, ensuring a quick print without…

Pobrania
914
Polubienia
90
Ocena
5
P
Printablescekpi7

8in (200mm) speaker grill

Printable speaker grill for audio projects. Designed to fit Pride Diamond 8 V2, but they should fit many other speakers (tested also with Rockville RXM 84). I've printed mine with ABS so they won't deform under higher temperatures.

Pobrania
778
Polubienia
49
Ocena
0
P
Printablesaussie-printing

200mm x 200mm 1-5mm slotted sieve

200mm x 200mm sieves slotted sieves ranging from 1mm to 5mm Frame to hold sieves can be found here: https://www.printables.com/model/996803-200mm-sieve-frame/files

Pobrania
629
Polubienia
24
Ocena
0
P
Printablesk3rbot

Bed level test 200*200mm

A 3 by 3 grid square of 20 by 20 cm and 0.2mm thickness to test the levelling of your bed. Works for the Ender 3 Print Settings Printer Brand: Creality Printer: Ender 3 Notes: In your slicer select your initial layer height to be 0.2mm or…

Pobrania
627
Polubienia
19
Ocena
5
P
PrintablesLasuJuhani

50mm-200mm bridge test

Introducing my simple Bridge Test Model, an essential tool to push your 3D printer's bridging capabilities to the limit. This lightweight model weighs in at just under 4 grams, ensuring it's easy on your materials and printer. The Bridge…

Pobrania
621
Polubienia
13
Ocena
5
P
PrintablesChewbugga

Halloween three legged Witches' Cauldron with handle, 200mm

My wife is somewhat of a Halloween aficionado and is never really content with what she finds in stores decoration-wise, so it was my turn to make a witches' cauldron tailored perfectly to her needs… Designed this rather quickly with just…

Pobrania
620
Polubienia
186
Ocena
5
P
PrintablesZedic

Bed Level Z-Offset Tests Spiral Circle and Square 200mm 180mm 160mm

Spiral Bed Level Test These are Spiral Bed Leveling tests created using an OpenScad File. The OpenScad File is included so you can customize your own Spiral test size. I use these to set the Z Offset on the fly after auto leveling with a…

Pobrania
616
Polubienia
9
Ocena
5
P
Printablesaussie-printing

200mm sieve frame

A 200mm x 200mm frame to place sieves into.

Pobrania
614
Polubienia
19
Ocena
0
P
Printablesaussie-printing

200mm x 200mm slotted sieve 6mm to 10mm

200mm x 200mm slotted sieve. Slotted sieves ranging from 6mm to 10mm. Frame to hold sieves can be found here: https://www.printables.com/model/996803-200mm-sieve-frame/files

Pobrania
606
Polubienia
17
Ocena
0
P
Printablesgenesis

Lego Technic Axle 200mm

Lego Technic axle 200mm

Pobrania
605
Polubienia
44
Ocena
5
P
PrintablesMalaMaker

Hot Wheel Track 90 deg Turn, 10 deg Bank w/ Improved Joiner (100mm, 150mm, 200mm Radius)

These are 90 degree turn with a 10 degree bank hot wheel tracks with joiners. Its input / output are level so there is no drop in this design. The tongues are designed to be push together / pull apart, which is showing to be easier than…

Pobrania
572
Polubienia
82
Ocena
4,5
P
Printablesandrewtch

Voronoi pattern soundproofind anti echo wall decorative panel 200mm

Simple yet stylish Voronoi pattern anti echo soundproofing panels! 200x200, tileable, and come in two versions - with screw holes and without (for, you know, double sided tape) and being just around 150g per piece the double sided table…

Pobrania
561
Polubienia
128
Ocena
5
P
PrintablesEloRaf

Luxo Jr for 200x200mm printer with Led light

Here is the Pixar Luxo Jr lamp totally 3D printed on 200x200mm bed and with led light ! To realize it you need white PLA for all parts except for : Join rods : you can used for it american fridge's pvc pipe (1/4"pipe) Light : you need a…

Pobrania
509
Polubienia
60
Ocena
0
P
PrintablesDester

Small spool adapter ring for Bambu AMS (140mm --> 200mm, for 3DJake 250g spools)

Converts a 140mm small spool to 200mm diameter. This is the standard size for 3DJake small spools. Many thanks to bkilian for the original one and providing the Fusion 360 file to be able to adjust to this size easily! Original model with…

Pobrania
504
Polubienia
29
Ocena
5
P
PrintablesMJJoaquin

200mm Fan Cover Guard Honeycomb Mesh

I couldn't find any good 200mm fan guards, so I made my own! Fits most standard 200mm PC fans with minimal airflow losses.

Pobrania
504
Polubienia
38
Ocena
5
P
PrintablesJon

200mm Moon lithophane

The moon was used on some of my previous projects ( Cat on branch watching moon lithophane - moonlight serenade by Jon | Download free STL model | Printables.com , Owl on branch silhouetted by moon lithophane by Jon | Download free STL…

Pobrania
501
Polubienia
63
Ocena
5
P
PrintablesSuko

Deck box magic the gathering 200mm

imprimez sur la face plate et supportez la charnière.

Pobrania
493
Polubienia
111
Ocena
5
P
PrintablesAdam

200mm height test

This model is a 200mm high tower and was made to test my printer at higher points to see if there was any z banding before a large print. The middle column is supported from 4 sides so shouldn't show much wobble but may still have a bit…

Pobrania
490
Polubienia
13
Ocena
5
P
PrintablesSuperIntendent

High-efficiency Noctua 200mm fan grill

Scaled up to 200mm and appropriate mounting hole spacing used in 200mm fans (154x154, 110x180, 170x170 mm). also shaped the mounting tabs to match the layout of the NF-A20 instead of being square like a typical fan.

Pobrania
482
Polubienia
47
Ocena
4,67
P
PrintablesScott711

Giant 200mm Ball Bearing

This is a remix to make a giant ball bearing, 200mm in diameter! It does need supports under each ball, but I found the tree type supports to break off cleanly and easily. The bearing runs well as printed but smooths out as you run it…

Pobrania
458
Polubienia
66
Ocena
5
P
PrintablesJim

simple bridge test (low cost, from 25 to 200mm)

Simple and fast and effective bridge test (10minutes printing time and 2g material). It is optimal for 0.2mm layer height and 0.4mm width, but it can work also for other settings. With this setting you will have one bridge layer, which is…

Pobrania
434
Polubienia
16
Ocena
5
P
PrintablesBen Burnski

200mm Radstand // Niedrige und hohe Felge für schöne Designs

Dies ist das Basisteil dieser Felgenserie. Sie besteht aus einer dreiteiligen Felge mit einem Durchmesser von 200 mm. Eine wirklich lustige Idee zum Aufstellen oder Aufhängen an der Wand. Es macht Spaß, diesen Grundbausatz selbst…

Pobrania
428
Polubienia
263
Ocena
0
P
PrintablesMinus-designs

Worx Landroid 1500L 200mm Disc

this is a two part easy print disc, with a disc diameter of 200mm for the Worx Landroid 1500L Print instructions Category: Outdoor & Garden Summary this is a two part easy print disc, with a disc diameter of 200mm for the Worx Landroid…

Pobrania
423
Polubienia
21
Ocena
0
P
PrintablesA_Porcupine

Bed Levelling Test Print (200mm x 200mm)

I put together this quick, single layer test print to test the levelling setup of my Creality Ender 3 v2, with CR Touch. The model consists of a 0.2mm thick pattern, that is designed to be printed as a single layer (with matching layer…

Pobrania
414
Polubienia
19
Ocena
0
P
Printablescekpi7

Door vent 100x200mm

Vents are expensive so i thought maybe i could print it myself. I came up with this model after printing few variants and fixing mistakes. You can put it on doors, printer enclosures, dehydrators, pretty much anywhere where you need…

Pobrania
369
Polubienia
49
Ocena
5
P
PrintablesGulsifer

150mm, 200mm & 250mm MGN9C Linear Rails

I hand meshed this with calipers and redesigned it to have tolerance. I have also printed them multiple times to test. Print the parts on the flat bottom side. You will need to reorient it in your slicer.

Pobrania
339
Polubienia
47
Ocena
4,67
P
PrintablesSkully

IKEA Skadis board small 200mm parametric

Looking at using the smaller boards as stand off's from the original. Didn't want to cut the original boards though.

Pobrania
323
Polubienia
18
Ocena
5
P
PrintablesJ.V.H.

S21/S19 Pro Antminer 200mm Air Duct

Free for all. Engineered for performance. Let’s mine silent. ⚠ Experimental Status Use the gasket (Printed in PLA or PETG) to verify the alignment of the holes. And let me know if something needs to be changed! I have used this model:…

Pobrania
308
Polubienia
9
Ocena
0
P
Printables321POP

Pentacle tealight holder (1-piece 200mm)

A pentacle to hold 5x standard battery-powered tealights. A symbol for each of the five classical elements, Fire, Water, Air, Earth, and Spirit face each point of the star. Do not use real burning wax candle tealights - it will melt,…

Pobrania
308
Polubienia
95
Ocena
5
P
PrintablesHijinx

200mm PC Fan Desktop Fan

Summer is coming. My office is getting hot. I had a spare 200mm Phanteks PC case fan and decided use it as a desktop fan. I have previously designed and printed some “feet” (https://www.thingiverse.com/thing:4515078) to angle the fan just…

Pobrania
304
Polubienia
85
Ocena
5
P
Printables3D-Fuchs

200mm fan mount with cover

The distance between the holes on the fan guard and fan mount is 154mm. Update 12.02.24: A new version of 200mm fan cover (v1.2) inserted. The holes between cover and bracket match.

Pobrania
298
Polubienia
35
Ocena
0
P
PrintablesChinaquads

JAYO 1.1kg AMS Cardboard Ring 200mm for Bambu Labs AMS

Cardboard Adapter for the 1.1 kg Jayo Spools. Fits perfectly on the Cardboard (very tight) and in the AMS. Prints ~ 16 minutes per Adapter. Use Concentric for pattern and infill pattern. Prints much faster.

Pobrania
295
Polubienia
42
Ocena
4,5
P
PrintablesJan

H0/TT fence 200mm x 16mm

fence 200mm x 16mm 7 mm from the end is a cylinder

Pobrania
274
Polubienia
24
Ocena
0
P

Fancy Cassette Rack - 10 Tapes, under 200mm - Remix

This is a Remix of Cassette Rack - 10 Tapes, under 200mm. Removed edges between cassettes just because i like it more this way.

Pobrania
267
Polubienia
34
Ocena
5
P
Printablesjattie

Basic Lampshade 200mm

Basic lampshade, 200mm base, 150 top opening and standard light fitting of 28mm.

Pobrania
265
Polubienia
37
Ocena
0
P
PrintablesNuvz

Two-tier countertop organizer bath / kitchen shelf. (200mm and 300mm versions)

A two-tier bath or countertop tray organizer. Dimensions of the bottom tray are 300mm x 121mm. Top tray dimensions are 300mm x 75mm. Upper tray support brackets add 165mm to the height of the of the unit with final height to top of top…

Pobrania
261
Polubienia
73
Ocena
5
P
PrintablesDarthTater

Cardboard spool edges 200mm

These are edges that you tape to a carboard spool so that it can run on a rolling spool holder like the one that comes with the Prusa Mini. These fit carboard spools such as those that come from 3DQF filaments. There are files for a full…

Pobrania
259
Polubienia
25
Ocena
5
P
Printablesviksangen3d

Half inch pipe BSP Thread 50, 100, 150, 200mm

½ inch pipe with BSP thread in both ends. Printed with 0,16mm layer height. I recommend printing theese with atleast 3mm brim. Had a few come loose without a brim. Be sure to check out my other piping models!

Pobrania
253
Polubienia
38
Ocena
0
P
PrintablesReneFNX

Stress test tower 200mm high

A stress test tower to test the performance and layer consistency 200mm High

Pobrania
244
Polubienia
6
Ocena
5
P
Printablesfrglez

Headset Stand for 200mm with storage

So I remixed the model from “TheoBr24” adding the storage idea from “Toni” which was the perfect solution for me. You can get the bottom part from “TheoBr24” model and the ring from the original model “DecoPrint”. DecoPrint original…

Pobrania
243
Polubienia
24
Ocena
5
P
PrintablesMATHOBB

Karcher Crevice nozzle 200mm DN35 / štrbinová hubica

Simple but solid crevice nozzle for Karcher SE.5100 Inner Ø: 35mm Height: 200mm You can print from PLA (the walls are quite thick). Use PETG for better durability and flexibility.

Pobrania
239
Polubienia
32
Ocena
5
P
Printableswaintdeir

Geometric Wolf/Fox Simplified 200mm

I was looking for some nice Geometric stuff to print with dual color filament and found this amazing design from https://www.printables.com/de/@dgemily and adjusted it to make it faster to print. Instructions: Print Wolf-Fox-Simplified (I…

Pobrania
232
Polubienia
68
Ocena
5
P
Printablesbeerman

Sean Fields Tank Trooper (Split to fit 200x200mm build plate)

Tank trooper helmet by Sean Fields, not my design, I've just split it in meshmixer to fit my printer. Only the first 6 files required splitting. Original files can be downloaded from shoretrooper.co.uk Happy Star Wars day :) UPDATE: Made…

Pobrania
229
Polubienia
96
Ocena
0
P
PrintablesEd Hume

Gauge 1 Model Railroad Radius 1200mm Switches

Here are left and righthand track switches with spring-loaded manually switched positions. These are for use with the Hume track system. See https://www.printables.com/model/902291-snap-together-gauge-1-model-railroad-track for the parent…

Pobrania
229
Polubienia
21
Ocena
0
P
PrintablesMalaMaker

Hot Wheel Track 45 deg Turn, 5 deg Bank w/ Improved Joiner (100mm, 150mm, 200mm Radius)

These are 45 degree turn with a 5 degree bank hot wheel tracks with joiners. Its input / output are level so there is no drop in this design. The tongues are designed to be push together / pull apart, which is showing to be easier than…

Pobrania
227
Polubienia
34
Ocena
4
P
Printableskarel.works

Milwaukee Packout - wall mount 200mm hole spacing

It's easy to print. Without supports. I use 15% Gyroid infill, PLA filament, but you can use probably any setup, it is quite firm.

Pobrania
224
Polubienia
61
Ocena
5
P
PrintablesJoKeR_1337

Filament leftovers trash / recycle bin (approx. 100x100x200mm)

Filament leftovers trash / recycle bin (approx. 100x100x200mm). Have fun to print ;)

Pobrania
223
Polubienia
21
Ocena
5
P
Printablesdrhollen

Vixen Dovetail Bar 200mm

Vixen-style universal dovetail plate (200mm long) for telescopes. Print upside down so you won't need supports. Center thread is ¼-20 UNC. Best to print with plenty of solid perimeters for strength.

Pobrania
222
Polubienia
22
Ocena
0
P
PrintablesDirkS2106

Gartenbrunnen / Garden Fountain 200mm

Bei einer Freundin hatte ich einen Solarbrunnen im Garten entdeckt. Fand ich ganz nett und hab ihn mit Modifikationen konstruiert und mit einer solarbetriebenen Pumpe versehen. Ich habe diese genommen:…

Pobrania
219
Polubienia
45
Ocena
0
P
PrintablesToneDreams

200mm Desk Fan Stand (noctua 200mm NF-A20)

Model Name: 200mm (Noctua) and 120mm Fan Stand using rubber mounts – 25° Angle (Mini Build Plate Friendly) Summary: A compact fan stand designed for 200mm Noctua fans, angled at 25°, and sized to fit within the 170mm build volume of a…

Pobrania
218
Polubienia
17
Ocena
5
P
PrintablesTheDarkPioneer

Strong Flying Propeller / Pull Copter (No Supports) With Toroidal For 200mm Printers And Modified Gear And Pulling Rod

The original with @frankm10_33400 modified gear and pulling rod and a bigger toroidal based on @MeisterEdel 's design.

Pobrania
216
Polubienia
19
Ocena
0
P
PrintablesRajonex

Enderon - create one Voron 2.4 (200mm) from two Ender 3s

Update log 07.08.2025 - added printing settings file for X1C, P1S, H2D 19.07.2025 - updated expired Discord link and added demo video 08.07.2025 - added PDF Manual 28.06.2025 - added BOM and Discord channel This project documents a custom…

Pobrania
214
Polubienia
179
Ocena
0
P
PrintablesWesty

200mm Ruler

This is a simple two-color ruler to be used in place of, or in conjunction with a calipers.

Pobrania
210
Polubienia
15
Ocena
4,5
P
Printablesiplay88keys

200mm Fan Front with IO ports and Power Button for Fractal Node 304

A custom front panel for the Node 304 case to support a 200mm fan, power button, and the IO ports that came with the case. This is a remix of two other models in order to get the best of both:…

Pobrania
208
Polubienia
23
Ocena
0
P
Printablesviksangen3d

1 inch pipe 50, 100, 150 & 200mm

1 inch pipe, 100mm long. I had to print this with a brim otherwise it would come loose from the buildplate. It fits perfectly with the 1 inch coupling I made and other parts are on the way like a 1 inch 90 degree turn and T connection.…

Pobrania
204
Polubienia
40
Ocena
0
P
PrintablesDrGFreeman

RING-FOCUS BELT CANON 70-200mm f/4

Ring to focus a Canon 70-200mm f/4 lens using an electronic focuser (e.g. ZWO EAF) and a 3D printer belt. Requires a 10mm or longer M2 screw and hex nut. The ring does not have teeth but instead uses screws or pins to hold the ends of the…

Pobrania
203
Polubienia
31
Ocena
5
P
PrintablesThomasGebets

200mm fan mount for 10 inch rack

To have decent airflow for the NAS section of my 10 inch mini rack, i created a Noctua 200mm fan mount with the option to add a dust filter.

Pobrania
201
Polubienia
32
Ocena
0
P
Printablesrycyt

200mm Caliper Gridfinity 3 x 8

Couldn't find a gridfinity bin that displays the caliper this way for a 200mm caliper, so I tried my best at making one. Caliper is a cheap, generic one from Amazon AU, have seen similar ones on AliExpress and eBay. Has a little coin…

Pobrania
201
Polubienia
14
Ocena
0
P
PrintablesMisterD

200mm x 20mm x 20mm Cable Raceway and Cover

As I was building my IKEA Lack enclosure/stand, I needed a clean way to guide the wiring along its backside so, I designed these. I've since printed several of these and they're so handy. They'll be used in many more places in the…

Pobrania
200
Polubienia
15
Ocena
0
P
PrintablesGeorgi Valkov

200mm Fan Front for Fractal Node 304

A remix of the previous two models with the following changes: The fan is mounted to the back of the panel via heat-set inserts. Magnetically attached fan cover. Holes for a reset button and the original power LED. An excessive amount of…

Pobrania
194
Polubienia
21
Ocena
5
P
PrintablesScared__Bunny

200mm Fan Vent

The original was to small so I made it bigger and changed the holes. they are now 170mm apart which fits for the 200mm Noctua Fans for which I used Them. Printed without supports and a 0.6 nozzle in draft mode with 0.4 layers in about…

Pobrania
192
Polubienia
42
Ocena
5
P
PrintablesDG

Bambu Spulenadapter Ring für 195mm Spulen -> 200mm AMS

Ich habe die Erfahrung gemacht dass Filamentspulen die kleiner 200mm im Aussendurchmesser für das AMS des Bambu Lab X1 Druckers Probleme machen können. Die Synchronisation zwischen Antrieb und Einzug passt dann nicht mehr. Deshalb habe…

Pobrania
192
Polubienia
19
Ocena
0
P
PrintablesSam Smith

Kpop Photocard Holder v1 200mm

a small tray designed to hold photocards that come in kpop albums. it sits on top of most monitors with flat tops. holds cards from the bottom at approximately a 105 degree angle. 1 200mm wide tray should hold about 4 photocards. Printed…

Pobrania
189
Polubienia
24
Ocena
0
P
PrintablesKeuleDidi

Anschlagwinkel200mm

Anschlagwinkel 200mm. Anschlagplatte wird mittels Ruthex Gewindeeinsätze M3 und Zylinderschraube M3x8 befestigt

Pobrania
183
Polubienia
17
Ocena
5
P
Printables3Dspoon

Tent Peg - 200mm

Recommended print settings PETG Nozzle: 0.4 Layers: 0.3 Infill: between 30-100% Perimeters: 5 Bottom/Top Layers: 8 Like the design? Please leave a “like” …. ❤ ….. Feel free to follow me …. ✅ ….. I am glad about every make and a nice review!

Pobrania
182
Polubienia
14
Ocena
5
P
Printablesnolano386

VESA 100mm to 200mm adapter

I have a monitor mount that only supports 75x75 and 100x100 screens. I had a screen I wanted to use that only had 200mm mounts, so I made this adapter. Printed at 15" infill with 4 perimeters, seems plenty strong for this 11lb screen.

Pobrania
172
Polubienia
13
Ocena
5
P
Printablescekpi7

8in (200mm) speaker ring

Printable speaker ring for audio projects. I've printed mine without bottom layers and after i filled it with resin. No issues so far. Designed to fit Pride Diamond 8 V2, but they should fit many other speakers (tested also with Rockville…

Pobrania
167
Polubienia
7
Ocena
0
P
PrintablesNOu

Calibration Cube XYZ 10x10x10mm - 200x200x200mm

Calibration Cube (10mm to 200mm) – A precise tool for calibrating 3D printers, available in various sizes to suit different testing needs.

Pobrania
164
Polubienia
7
Ocena
0
P
PrintablesAnthony Kemnitz

@M4NU 200mm Heart Bracelet Remixed for Softer Point

My mom broke her bracelet so I was going to just remake a single link for this, but I noticed a few people saying it was too “pointy” and mom agreed so I figured I would round it out a little bit. Other than that, it's the same model made…

Pobrania
163
Polubienia
24
Ocena
5
P
Printablesnotcommonlyjoe

Vesa Mount Adapter - 75/100mm to 200mm (Small Printer Accessable)

Vesa Mount Adapter from 75/100 Vesa hole patters to 200mm monitors STEP Files included for spacer adjustment Designed for M4 Screws for the 75/100mm Holes and M8 Screws for the 200mm Holes Adjustable in included files 2 Models included: 1…

Pobrania
161
Polubienia
11
Ocena
5
P
PrintablesDubbs

Sunlu RFID Tag Adapter for CFS (200mm Spool)

An adapter to stick a 25mm RFID tag in the correct spot for any spool to be read by the Creality CFS if you're using custom RFID tags. I couldn't find an adapter for this exact spool, so I made one. Sunlu has several variations of spools…

Pobrania
159
Polubienia
17
Ocena
0
P
PrintablesFree Bird

Little Big Guitar (printable on a 200x200mm printer!)

Small guitar body suitable for Electric Guitar Kit CST-24 Print Settings Resolution: 0,3mm Infill: 50% Filament: Maertz PLA Black&Blue Notes: (printable on a 200x200mm printer!) Category: Music

Pobrania
159
Polubienia
56
Ocena
5
P
Printablesbreadman

200mm fan fractal node 304 2 pieces

I split the model so it could fit on my ender 3 print bed.

Pobrania
159
Polubienia
12
Ocena
0
P
PrintablesMcBig

Speed Squere 200mm

After print, you must use high pressure to join parts, which is right, while we could not use glue. Print instructions G-CODE is without any loops, and it is fit to full printed space on MK3 printer, with negative area, because larger…

Pobrania
154
Polubienia
19
Ocena
5
P
PrintablesHWFreak70

Hexagon Modular Drawers 200mm Depth - V2 - Added Inner Filler Panels

I needed some modular drawers so I made these hexagon modular drawers, there are 4 styles and all come in 3 depths, 100, 150, & 200 mm depths. I printed the Enclosures on .2mm Speed and the drawers on .15mm Structural, leave the…

Pobrania
154
Polubienia
53
Ocena
5
P
PrintablesBlock1543

Nikon HB-37 lens hoods (Fits AF-S DX Nikkor 55-200mm ED VR)

Lens hoods for AF-S DX Nikkor 55-200mm ED VR lenses. These are reversible like the HB-37 lens hood from Nikon. Supports are needed to make the reverse hood mount print properly. .STL and .STEP files included.

Pobrania
151
Polubienia
11
Ocena
5
P
PrintablesNusselt

Stackable Tray (200mm * 210mm * 33mm)

I've printed them using supports in the lower part. There is a 1,5 mm cantilever to allow them to be stackable.

Pobrania
151
Polubienia
31
Ocena
5
P
PrintablesKola

Air Conditioning Adapter 200mm to 150mm

I printed this adapter to connect a 200mm CO2 laser exhaust pipe to a 150mm pipe.

Pobrania
148
Polubienia
8
Ocena
0
P
PrintablesMarcel Isler

Bahtinov Mask for Nikon 70-200mm lens

This is a simple Bahtinov Mask that fits on the front barrel of a Nikon 70-200mm lens or any other lens that has an outer diameter of 88mm. Category: Camera

Pobrania
143
Polubienia
9
Ocena
0

Noctua 200mm Lüfter Adapter auf 100mm

Dieser Adapter kann als Reduzierstück für einen 200mm Noctua Lüfter wendet werden. Ich verwende ihn, um Luft aus einem Gewächshaus zu ziehen. English: This adapter can be used as a reducer for a 200mm Noctua fan. I use it to pull air from…

Pobrania
140
Polubienia
10
Ocena
5
P
PrintablesAlex Don

200mm Filament Spool Holder IKEA Skadis (22mm dowel)

It fits perfectly for the most common spools which have a diameter of 200mm. This is a skadis accessory to save on filament use and make just 2 sides and have a bunch of spools in between. You can print with default setting and supports…

Pobrania
140
Polubienia
15
Ocena
5
P
PrintablesMartunex

Millimetric Ruler [20cm/200mm]

The model is splitted into 2 parts so it can be printed in multiple colors with just one nozzle. Make sure to align it correctly so that the markings are flush with the ruler as is meant to fuze with it.

Pobrania
137
Polubienia
3
Ocena
0
P
PrintablesShawnvanlan

200mm Drone Frame Vertical Stretch V3

Vertical 200mm Quad Frame. Using PTEG frame Weighs 73 grams not including Hardware. Uses 5" props and 2000 series Motors. Print 2 Side Frames, do not mirror, Bolt together with 2- 3mm x .5 x 35mm Socket Screw with 3mm and 4- 3mm x .5 x…

Pobrania
137
Polubienia
12
Ocena
0
P
PrintablesMG3D

Vase curved lines 200mm

Vase 200mm height curved lines

Pobrania
131
Polubienia
17
Ocena
5
P
PrintablesDaTryhard22

Bahtinov Mask - Nikon 70-200mm f2.8 VR

This Bahtinov mask is used to help focus your lens on the stars precisely. I used a website called https://skeye.rocks/tools/mask/ to generate the mask STL and then added my mounting geometry. This mask uses the existing lens hood…

Pobrania
130
Polubienia
9
Ocena
0
P
PrintablesShashi Karanth

Tissue Box 200mm Tissues

I made this tissue box holder for my 200mm tissues. There are 3 different designs for the box. Print with respective lid. It can be scaled as desired also below is the link to onshape model to make your own changes.…

Pobrania
129
Polubienia
17
Ocena
0