Liczymy pasujące modele…
DIY Motor für Federwiegen - einfach - sicher (entkoppelt) - günstig - OpenSource - Firmwareupdate geplant (Timer-Funktion, SilentMode, etc) - Servo-Version geplant Print instructions 1. Druckteile Motorhalter: Prusament PLA, 0.2mm, 20%…
Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu
STAIR LED BOX BASE002_0.4n_0.2mm_PETG_MK4IS_9h53m
Wydruk około 12,06 €–14,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Motivation The frame of the housing of a Takamine TK4NT acoustic guitar preamp broke, so that the preamp was no longer fixed in the guitar. I designed a replacement housing. Printing I printed the design on a i3 MK3 using PETG, layer…
Yashica Electro 35 Battery Adapter /Yashica MG-1 (etc etc) After a sucess of previous model (first upload on 5th december 2019), I decide to improve the model by reinforced the adpater. If you have an old camera that uses mercury cell…
A friend of mine wanted to wall mount his mesh nodes after seeing this: https://www.thingiverse.com/thing:4205546 I made a similar design for the smaller XD4N nodes. Printed in Prusament PETG with standard PrusaSlicer settings at 0.2…
Body tramwaju technicznego KONSTAL 4N #G w skali TT 1:120 Przygotowane otwory pod oświetlenie LED SMD 0603.
My mom broke her bracelet so I was going to just remake a single link for this, but I noticed a few people saying it was too “pointy” and mom agreed so I figured I would round it out a little bit. Other than that, it's the same model made…
Allows regular vacuum cleaner attachments to be used with the Bosch Move. Hose attachment is 35mm diameter. Brim recommended if your bed adhesion isn't top notch. No supports needed.
This is the simplest design for mounting a 100 mm dust collection hose to the Makita 2704N table saw (63 mm OD) I came up with. Can be printed without supports. Depending on your setup a two-side brim will improve bed adhesion. Update…
The Prusa XL comes with a few M4nEs drop in T-nuts which are very handy. I needed some more to attach accessories to the frame. These T-nuts roll into the extrusion and the back arm pushes the T-nut perfectly into place so it makes it…
Alutech AT-4N clip for car sun visor.
just a scan of controller for your needs, feel free to use
Upgraded fan bracket for Sovol SV04 and SV01 Pro using the EBMPapst RLF35-8/14N. Highly recommend printing in at least ABS/ASA.
Modified version of the V4n4g0n case here: https://trashman.wiki/files#v4n4g0n . This one uses heat set inserts on the top case instead of threading straight into plastic. I used m3 threaded inserts. Outer diameter of 4.6mm and a height…
Parts for this specific RC car seem to be going NLA and incredibly hard to find for the right price This is still WIP and I would still have to add a battery holder to it but right now it fits and the servos fit Added fusion360 file so it…
Alutech AT-4N holder for garage door remote control
Remix from Crashkg enabling to more easily insert a standard M4 DIN nut.
I needed to mount my Zoom h4n pro to a microphone stand so i have designed a mounting bracket for it which holds the whole device in place not just by the screw. I have added a screw stl to it so you dont have to search for it. Enjoy…
A long time ago the second gear of my RC car broke. I printed a replacement part waiting for the original components to show up. I hope this helps someone! 04/08/2023 Update: Due to popular demand I designed the 41 tooth gear. I hope it…
A V4N4G0N Keyboard case with a handle to throw it away if you lose in the game. It's compatible with V4N R3 PCB and Monorail.
I took the design idea from Robert and iterated on it. I wanted to have a bit of height adjustment and the original design wouldn't look right if I used the standard M4 socket head screws from the spool holders. It is only tested with the…
This little thing takes one of the cheap eBay powerbank modules "134N3P" and clips to a 18650 battery holder. Like this you can get a small powerbank for one 18650 below 1$. My 18650 is salvaged from an old laptop battery... ... and the…
This is a 5in1 Kumiko Lantern of my first 4 designs. The full lanterns are to come. There are 3 different bottoms for different LED tea lights. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution:…
This is a wall mount for the Conair 1875 / 124NP blow dryer. I mounted it with 3M Indoor Mounting Strips. Things Used Conair 1875: https://smile.amazon.com/Conair-Compact-Folding-Handle-Travel/dp/B0012DL8B4 Command Indoor Mounting…
The screw is designed to work with 0.4mm nozzles and will be compatible with 0.2mm and 0.1mm nozzles. Pitch is 1.6mm with the root/crest and height of 0.4mm. The screw diameter is 5mm & 3mm. These screws are designed to be printed on…
I made this model because one of the clips on my Takamine D024007 Preamp broke off and it could no longer provide enough tension to make a good connection. I designed a replacement box to get the preamp working again. Here are a few…
I remixed this so the sides were flat, that way I could attach it to the back of action cameras. Holes in the middle of the model for a securing screw and to allow the cables to enter neatly behind the controller. Category: Electronics If…
BUILD SEASON 3D Print replacement for SDS MK4n L2+ gears. 18T SplineXS Drive gear requires a WCP-1121 3D print adapter. 2024-01-08 UPDATE: Denbot MK4N L2+ 26T 52T 20DP Double Gear bearing clearance updated after finding the wrong value…
I needed to mount my Zoom h4n pro to a gopro mounting stand so i have designed a mounting bracket for it which holds the whole device in place not just by the screw. I have added a screw stl to it so you dont have to search for it. Enjoy…
This is a 5in1 Kumiko Lantern of my second 4 designs. The full lanterns are to come. There are 3 different bottoms for different LED tea lights. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution:…
Material: Petg grau Düse: 0.4mm Layer height: 0.15mm Abziehwerkzeug: Ohne Supports Kappe: Mit Supports (paint-on) für den äusseren Rand und evtl. Variable Layer Height für den oberen Radkappenbereich.
Robust belt clip for microphone Zoom H4n Pro. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 1.15 Infill: 30% Filament: Design Devil PETG Black Category: Audio
I saw HSP's D3fault and wondered if it was worth the money. I settled on “no, it's not," and designed my own. You insert the St4ndard circular side facing the back of the rifle and flat side pointed towards the position you want your…
The IRLZ44N is a high-performance N-channel logic-level power MOSFET.
Replacement for missing ring in the solder iron holder. Print instructions Category: Electronics
BUILD SEASON 3D Print replacement for SDS MK4n L3+ gears. 18T SplineXS Drive gear requires a WCP-1121 3D print adapter
My reskin of Misplaced Moose's B34R. Was aiming for Beloved from Destiny 2. Assembles pretty much like the original, with the exception of the PEG and BOTTOM RAIL. The peg should be self explanatory, the bottom rail is inserted thru the…
This is a custom keyboard case I made based on the V4N4G0N style case but made to fit the insides of the Inland MK47 . I printed the one featured in the photos at 0.16mm height in Bambu Matte and Bambu Silk+ PLA filaments. I imported all…
Źródło oznaczyło ten model jako treść 18+.
BUILD SEASON 3D Print EXPERIMENT for SDS MK4n L4+ gears. 18T SplineXS Drive gear requires a WCP-1121 3D print adapter
in progress at the moment, some parts are compatible with the diatone taycan Category: R/C Vehicles
For the umpteenth time Ibanez SPT guitar preamp in my Ibanez PF60 acoustic guitar has failed... I don't want to deal with the repair again (or maybe I want, but don't have time now), so I found a cheap alternative that has as similar…
I used PLA because it warps the least. Works great! For me it's a perfect tight fit.
had no M4 heat inserts, so I modified original holder for use with classic M4 nuts added v3 with nut holes from sides removed all deprecated versions (not so precise) print without supports (or manual support on 2 outer screw holes only)…
cable opening can be reduced
Update: Added grilles to avoid filament waste to drop into the fan while purging I have been inspired by the following model: https://www.printables.com/model/978844-rr-v-core-4-bed-fan-chamber-heater-by-pd3d But it was not fitting the…
These mounts do 2 things to improve on the CNC4N design. First, they are more stable and will accommodate larger drag chains. The second thing they do is position them better to allow chains to meet the MBR if the cables inside them and…
printed it in PTEG on Bambu P1S with 0.20/strength profile with PTEG support there are several parts. the side without and with cutout for the tiny cable canal with 90° angle which fits to a bigger canal on top of the big Hager piece
Boitier permettant d'intégrer un relais 14 pin avec voyant et bouton de test avec son support de connexion, lien du relais que j'ai utilisé :…
🇩🇪 Deutsche Version (english below) Ich habe diese T-Nut-Mutter für meinen Prusa XL entworfen, weil ich eine schnell verfügbare und günstige Alternative zu den Originalteilen gesucht habe. Gerade für kleinere Anbauteile wollte ich nicht…
Das Modell von https://www.printables.com/model/929117-ryobi-router-vacuum-adapter-for-nilfisk-multi-ii-3/files hat mich inspiriert, dieses Konzept auch für die DeWalt DCW604 umzusetzen. Verwendete Hardware 2× Metallstangen Ø 7 mm, ca.…
Use with screw with metric thread M8 x60
Zur Montage der Klemmen an beliebiger Stelle. Der Rahmen sitzt sehr straff, evtl. kann der Druck mit z.B. 101% Zoom erfolgen, dann sollte es lockerer sitzen. Gedruckt mit 4 Wandlinien, es gibt also keine Füllung. To mount the terminal…
xCarve CNC4Newbie Z Plate I purchased a CNC4Newbie Z Slider N23LC56XC ( https://cnc4newbie.com/store/en/z-axis-slider/n23lc56-xcarve-slider-p93c37/ ) and found that the instructions do not mention that you will need to cut off part of the…
Here I made a modification to a Canvas riser I liked made by another creator. it's nearly the same size as the emoji edition CC2 but made for the CC1. I made this addition so I can still print TPU without going through the canvas unit. I…
The Concept: Power in Disguise In electronics, a logic-level MOSFET like the legendary IRLZ44N acts as a gatekeeper—allowing a tiny 5V signal from a microcontroller to command massive amounts of raw power. This case takes that metaphor…
专为CR2020设计，风扇为rlf35-8/14n，出风口风向对准打印制品和喷嘴下方，加热块需要跳转180度摆放，以获得最佳位置。（其实是因为市售的硅胶套都只能这么装） PS：我暂时是使用PLA印刷，稍后我会试试ABS Designed for the CR2020, the fan is rlf35-8/14n, the air outlet is aligned with the printed product and under the nozzle, and…
Using Doug Joseph's awesome remixed side mount spool holder , I wanted to use a 4n1 PTFE Adapter so I can have 5 spools of filament ready for use, 1 on the spool holder and 4 in reserve. This platform fits the hexagonal spool holder by…
This 3D print is for mounting a RODE Wireless Pro Receiver to the back of a ZOOM H4N Pro . This mount clips onto the side of the device and screws into the 1/4 mount on the back. This mount obstructs both the USB port, SD card slot, and…
Quick-and-dirty remix of to hold 2 x 18650 cells and a 134n3P module.
These are protective covers for the SDS MK4n swerve modules that make sure the swerve gearbox stays safe from damage. There are covers for both A and B modules here. They can be used for FRC or other robotics applications where MK4n…
This is the drill chuck that came with my Bridgeport when I bought it as surplus. I hadn't expected it to come with a chuck, so it was a nice surprise that its prior owner left a pretty decent one installed in the spindle, and nobody…
Boom 1 - Thermistor 1 - m3x8 1 - m2x6 selftap 1 - m3 tnut
English Version Bounce4Nap is this great project by edelsteff of an open source spring cradle. These things help a lot with your little ones. Unfortunately, these things cost a lot. Bounce4Nap tries to solve this by building an affordable…
A protective cover to prevent adjustment of the knobs on the E4N air gage. After the calibration is set, you don't want to accidentally move the knobs and throw off the measurements. This is a copy of a broken cover that we had with one…
GameSir T4n Lite controller holder for the Fractal North PC case Supports required for hooks
Arginine (C6H14N4O2) - Multi-Color 3D Molecular Model (Space-Filling Spheres) An accurate, educational 3D printable model of Arginine (C6H14N4O2) in classic Space-Filling (van der Waals / CPK Spheres) style. Ideal for chemistry…
Lysine (C6H14N2O2) - Multi-Color 3D Molecular Model (Space-Filling Spheres) An accurate, educational 3D printable model of Lysine (C6H14N2O2) in classic Space-Filling (van der Waals / CPK Spheres) style. Ideal for chemistry classrooms,…
These are protective covers for the SDS MK4n swerve modules that make sure the swerve gearbox stays safe from damage. There are covers for both A and B modules here. They can be used for FRC or other robotics applications where MK4n…
just a scan of controller for your needs, feel free to use
Das Modell von https://www.printables.com/model/929117-ryobi-router-vacuum-adapter-for-nilfisk-multi-ii-3/files hat mich inspiriert, dieses Konzept auch für die DeWalt DCW604 umzusetzen. Verwendete Hardware 2× Metallstangen Ø 7 mm, ca.…
This 3D print is for mounting a RODE Wireless Pro Receiver to the back of a ZOOM H4N Pro . This mount clips onto the side of the device and screws into the 1/4 mount on the back. This mount obstructs both the USB port, SD card slot, and…
xCarve CNC4Newbie Z Plate I purchased a CNC4Newbie Z Slider N23LC56XC ( https://cnc4newbie.com/store/en/z-axis-slider/n23lc56-xcarve-slider-p93c37/ ) and found that the instructions do not mention that you will need to cut off part of the…
This is a modified dust shoe from https://www.thingiverse.com/thing:1892044 . It's modified to fit cnc4newbie's xcarve slider. It uses the same hardware as the original Here a few more modifications I did: a) made the brush slots…
The power strip that I have has two pairs of slotted mounting holes in it that are 32-mm on center. The mounting holes are 7-mm in diameter and the slots are 3-mm in diameter. Material, fill, and layer height are flexible. The assembled…
![[CC1] Lowered Canvas Remix (originally made by MU74NT) for TPU Conversion](https://media.printables.com/media/prints/cf3f208e-2586-40bc-b8e1-e34b09953f5e/images/13135792_7f5bf317-7c3d-46f8-b4e4-8ba2d74e7d49_09d70bf9-0516-4c40-a91d-a43219a0dad7/screenshot-2026-06-13-142351.png)
