Liczymy pasujące modele…
Seat Mount, Indian, Part 5139695. Replaces https://www.indianmotorcycle.com/en-us/shop-parts/5139/5139695/
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
Print it using a heat resistant material. Orient the print so it is on the side, NOT laying flat on the build plate. Use supports. Use 0.10 mm setting.
Anschlagschiene 1727 für Leitz Locher 5138. Getestet mit Locher 5138, sollte aber auch mit folgenden Lochern kompatibel sein: 5005, 5008, 5012, 5022, 5038, 5132. Update 20.11.2024: Ich habe das Modell überarbeitet und einige neue…
Best printed standing with high infill. I prefer stronger filaments such as abs or pc. The support is only needed in the part where there is a latch. In the hole for the screw remove the ready support that is in the model, it is easy to…
This model is compatible with the lego system.
Print it using a heat resistant material. Orient the print so it is on the side, NOT laying flat on the build plate. Use supports. Use 0.10 mm setting.
One the stands of my keyboard broke so designed a replacement with onshape. The cut out at the bottom is for the ruber inlay from the original feets Print instructions Prints fine with 0.1 mm layer height and support on the build plate
This model is compatible with the lego system.
This model is compatible with the lego system.
A replacement paper guide for a Leitz 5138 hole puncher
I think that you can make a cool 2 color print with this, enjoy ! I don't know how to make them fit perfectly, but if you know a minimum of 3d modeling, I think you can do it. I created to make a sticker, so don't judge me :))
sail clip playmobil pirate ship 5135 → 0.4 Nozzle → 0.2 mm Layer Height → 20 - 30% infill → PLA
I acquired a used SMX2200RMLV2U and SMX120RMBP2U but only one set of rack ears. This design is sufficient to hold the UPS/battery in the rack as long as its mounted on the APC rail kit. Print in same orientation as UPS configuration…
The clips of the red side marking lights in all four doors of P80 series Volvos (V70I, S70) tend to break when you try to remove them to change the light bulbs. Sometimes they even break when slamming the door too much. While the lights…
These are table inserts for my Grizzly G0513X2BF Bandsaw, they fit perfectly and work great
This is a laptop stand for the Asus Rog Strix G513GU. Im sure it should fit other rog strix models. 4 piece.
Simple replacement tipper element for the metal Märklin 4513 Wagon. Printed with supports, best way I found was upside down so the marks are inside. If not printed in high resolution, the axle elements require some filing. Complete…
Bandsaw table insert for Grizzly G0135. Drops right in place of factory part. I printer in PLA with 4 perimeter walls and 30% infill and it worked great. Category: Tools
I acquired a Mitutoyo Dial Test indicator without the original box so I went ahead and designed this to fit it. The DTI slots into the bottom and the top centers on the bezel. The model is designed to be printed in Multi-Color for the…
Print this in whatever material you like. Switch filament at the appropriate layer for contrasting color infill. You will need 4 ea, m3x8mm socket head cap screws and m3x5 long, ish heat set inserts. If you are unsure about the heat set…
Layer 0,16 - with support. My first test print is from PLA, second from CPE HG100
This model is compatible with the lego system.
Desktop stand for Makita cordless grinders (DGA513). Free tool positioning.
The "Akro Mils Divider (Small)" by DanielStein was to thick for my VarioPlus Original 75. So I've decrease the hight to 75%. It's quiet thin but works perfectly. Thanks to DanielStein for his work! Print Settings Printer Brand: Creality…
As many Einhell tools they use non standard shape, so I wanted a zero clearance insert and here is. I printed on PETG, but works on PLA too. I don't know if works for others Einhell models. Print Settings Printer: Rafts: No Supports: No…
Small tool designed to open the internal case clips on IBM 14L10/15L10 (Aptiva) and similar Monitors. These clips can only be reached through a small vertical opening (see image1). Just insert the tool through these openings, making sure…
I needed a way to stop the power brick for my TP-Link SG-108PE POE switch from being knocked down the back of the cupboard and putting strain on the cable end. This is a small bracket to mount it to a wall/cupboard/etc. The holes are…
Simple L bracket to hang my DeWalt ratchet from a 2x4. Printed in a little more than 30 minutes with variable layer height on my Core One. I did not do this, but you might consider printing it so it lays on its back instead of upright.…
The main handle on this microwave is made of steel, but it mounts via 2 plastic pieces (painted to look like steel). The plastic parts are fairly easy to break, and the handle is only sold as a complete unit, as far as I could find. Print…
Since the DeLonghi fully automatic coffee machines do not have a holder for the hot water nozzle, I designed a simple holder to stick on. The holder can either be glued on as shown in the photos or rotated by 90°.
This is the urethane belt used on the Task Force 90181 10" band saw wheels. This also might possibly fit the Craftsman 113.244513 10" band saw since these two saws are identical looking. Printed in 95A TPU this fits my Task Force 90181…
Material ASA or PETG recommended - UV resistance Infill 50%, print with supports Nut: M8 The difference between v1 and v2 is in the rounded corners, everything else is the same.
Mitutoyo Test Dial Indicator (513-402-10T) Gridfininity 3x2 Box This should fit all(non-long range) horizontal Mituyoto Test Dial Indicators. This model includes space for the accessory kit.
These are parts used to make a powered Tachometer display box for a small Lathe or Milling machine and mount the connected sensor to a OPTImill BF16 Vario Milling machine via either an Replacement Cap cover part or a bracket. Two…
I created this for work because the front office ladies wanted to use a Dell tablet left over from an old project to connect Bluetooth to a stereo that was connected to the ceiling speakers instead of using their phones. So I connected…
DeWalt DCF513B 20V Ratchet Wall Mount – Print Info & Notes I designed/printed a wall-mounted holder for the DeWalt DCF513B 20V Ratchet and wanted to share the printing details for anyone interested in making their own. Print Settings…
This is a little organizer for a wood dowel jig sold by Taylor Toolworks under the description: "Dowel Drilling Guide Jig Kit 3" Square Base Hardened Guides 3/16" to 1/2"". I printed this on an MK3S+ with PETG filament. The nozzle was a…
When converting a vehicle from Manual to Automatic or to Electric, the clutch master cylinder is not used anymore, leaving a hole in the firewall. Automatic cars came with a cover washer in place of the master cylinder, but it appears to…
Safety / Storage Cap for Weidmüller Sidecutters
IKEA Floor Lamps 70145132 60416176 Image to Lithophane http://3dp.rocks/lithophane/ Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Category: Other
I love having a wireless charger for my phone. The problem is that if the phone isn't centered over the charge coil, the charge stops. It's disappointing to pick up your phone in the morning only to realize that it got bumped the night…
iphone 14 Pro Max Stand for Logitech g512-513
Suitable for Keyboard Logitec G513 VESA 75x75 VESA 100x100
This is a replacement similar to the stock one, on a Grizzly G0513X2BF, as well as a narrow version. Can be printed without supports.
ORGANIZER GT513 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
Should be printed with flex filament e.g. Fiberflex 40D.
Multiboard hanger for the Dewalt Cordless Ratchet
A collection of models to mount Flipsky 85135 motor & Flipsky 75350 ESC on the standard boat transom. It has cooling channels for the water to flow along the motor. The motor casing on the photos is a bit older and cruder in comparison to…
Wall holder for WIX_51394XP oil filter. This oil filter fits my CF-MOTO 650 Adventura. The engine oil threaded outlet is 3/4” -16 threads. Yes for a Jap or Chinese bike this is not what I expected. Double check yours. That is what mine…
Print on pad surface, use 95A (or any) TPU, I printed mine with 100% infill. Should just slip onto your vice and keep on by friction (close to the original)
Adapterplatte um den Deckenventilator mittig zum Bett weg von der Deckendose zu installieren... Ihr benötigt evtl. längere Schrauben. Der Adapter trägt 10mm auf! Material: PETG Bambu HF weiss
Arm axle screw head seems to protrude outside of 9.5 cylindrical front part.
This is an FDM printable version of the official Stern Flipper Bat for a pinball machine. A colleague's daughter needed some of these for her science project and I found this site while trying to find the dimensions of a pinball flipper.…
This model is compatible with the lego system.
This is a replacement similar to the stock one, on a Grizzly G0513X2BF, as well as a narrow version. Can be printed without supports.
Wall holder for WIX_51394XP oil filter. This oil filter fits my CF-MOTO 650 Adventura. The engine oil threaded outlet is 3/4” -16 threads. Yes for a Jap or Chinese bike this is not what I expected. Double check yours. That is what mine…
ORGANIZER GT513 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
This model is compatible with the lego system.
One the stands of my keyboard broke so designed a replacement with onshape. The cut out at the bottom is for the ruber inlay from the original feets Print instructions Prints fine with 0.1 mm layer height and support on the build plate
Desktop stand for Makita cordless grinders (DGA513). Free tool positioning.
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
Famous Art - Saint John the Baptist - Leonardo Da Vinci - 1513 3D printable model.
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
![Display Stand for LEGO Star Wars 75136 Droid Escape Pod [last update 9.04.2024]](https://media.printables.com/media/prints/838515/images/6458193_32a9460f-97f9-4c05-b58b-05e1531cc24d_03d00fd0-5006-43d8-a628-048abb1295f1/75136-2.jpg)