Wyniki wyszukiwania: 51mm

Sortowanie

230 modeli

P
PrintablesGhostbird

Washer fluid cap 51mm / 2"

Though designed for a 2006 Toyota Aygo, it may just fit your washer tank opening, as long as it has a 51mm / 2 inch diameter snap-fit rim. Printing I printed this in ABS, but most thermoplastics will probably work fine. Washer fluid…

Wydruk około 0,95 €–1,16 € nettoWstępna wycena jednego wariantu

Pobrania
564
Polubienia
114
Ocena
5
P
PrintablesOBA

Flexible SUNLU Filament Spool Adapter V2.0 (73mm to 51mm)

The SUNLU filament spools (~73mm center hole) have slightly different diameters on their left and right side. This makes adapters with fixed diameter to fit very tight (hard to remove again) or too loose, so they can slip out while…

Wydruk około 5,33 €–6,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
244
Polubienia
19
Ocena
5
P
PrintablesCcaroccio

Breville 51mm Dosing Cup and Funnel

the Breville Cafe Roma uses 51mm portafilter basket. This model allows you to dose grounds into a cup with a detachable funnel. The dosing cup then fits nicely into the 51mm portafilter basket. The funnel also has a circumferential groove…

Wydruk około 4,52 €–5,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
120
Polubienia
8
Ocena
0
P
Printablesmsatbsx

Portafilter hanger for 51mm DeLonghi ECP3420

Elevate your coffee-making experience with this custom-designed Portafilter Hanger, perfectly tailored for the 51mm portafilter of the DeLonghi ECP3420 (and similar) espresso machine. Key Features: Perfect Fit : Designed specifically for…

Wydruk około 2,02 €–2,47 € nettoWstępna wycena jednego wariantu

Pobrania
110
Polubienia
15
Ocena
0
P
Printables3DM-DeMeern

Small bowl Ø95x51mm

This is a small bowl to keep small parts or use for sorting parts, printed without supports. This bowl feels like a general bought bowl this is because there is only a small part which has a infill most is solid PLA. We use it in the…

Wydruk około 2,83 €–3,46 € nettoWstępna wycena jednego wariantu

Pobrania
55
Polubienia
4
Ocena
0
P
Printablesmodsmthng

blind shaker : donut 58mm 57mm 54mm 51mm 49mm Flair Pro 2 (45.5mm) Flair Classic (Donut espresso shaker / donut espresso shakr)

The Donut Espresso Shaker is an espresso shaker that enables even distribution when preparing espresso for a wide range of portafilter sizes. What makes the Donut Shaker special is that it achieves this result with any portafilter size…

Pobrania
1824
Polubienia
208
Ocena
4,91

Dosing funnel for 51mm DeLonghi Dedica portafilter

Are you tired of dumping coffee all over your counter every you time dose grounds into your portafilter? Do you have a 51mm portafilter? Well then I made this dosing funnel just for you my friend! Introducing DOSING FUNNEL FOR 51MM…

Pobrania
1336
Polubienia
106
Ocena
4,44
P
PrintablesCS

Tamping Station for Delonghi EC 685 51mm Portafilter Tamper

After a few interations this model did well during testing. Especially when using only one hand for tampering, the portafilter is not stable when pressing down, so a solution must be found. For my portafilter the fit is quite snug. If you…

Pobrania
1268
Polubienia
134
Ocena
5

51mm Espresso Dosing Funnel

.2mm layer height; .4mm nozzle; PLA 4 or more perimeters and infill whatever you want.

Pobrania
967
Polubienia
53
Ocena
4,71
P
PrintablesRudy Martin

7.62mm X 51mm NATO Bullet

FDM -> It is recommended to use a layer height below 0.15 for printing. It is recommended to use LCD or SLA for printing to obtain higher precision. "A series of high-precision bullet models." In order to meet the needs of military…

Pobrania
879
Polubienia
65
Ocena
5
P
PrintablesRSiCosta

Espresso 51mm Tamper & Distributor plus Grinder

Printed with tamper side to the build plate with supports.

Pobrania
855
Polubienia
81
Ocena
5

51mm Espresso dosing funnel - Wider

Snug fit for Delonghi and other 51mm portafilters. .2mm layer height, extra perimeters. Food safe at your own risk.

Pobrania
654
Polubienia
66
Ocena
4,75
P
Printablesmaker_painter

Delonghi Dedica series - simple porta filter funnel (51mm) EC680, EC685, EC785 ...

All credits to placebo_design for his beautiful and functional design (thingiverse.com/placebo_design/designs). This is a remix of “51mm Funnel for porta filter Delonghi EC680 series” by “Placebo_design” (thingiverse.com/thing:3471204).…

Pobrania
512
Polubienia
53
Ocena
4,82
P
PrintablesJori

DeLonghi 51mm portafilter holder for e.g. EC685

There are already several models out there; Didn't find one with perfect fit for my DeLonghi model which didn't take forever to print. => On to CAD and made my own. Model number of espresso machine in headline to identify if it fits for…

Pobrania
431
Polubienia
52
Ocena
5
P
PrintablesSimplifiedLife

Eureka Mignon Dosing Cup Holder for 58, 56, 54, 51mm cups

Remixed to make useful with a Eureka Mignon on a tilted base. It may also be useful for people who want the holder to retain the dosing cup more securely without a tilted base. Have also included a version for different size dosing cup…

Pobrania
423
Polubienia
23
Ocena
5
P
PrintablesMarat Jernyayev

Delonghi Dedica 51mm Portafilter Tamping stand

I designed it for my Delonghi Dedica portafilter tamping pad. goal was to design one that would match the rubber tamping mat. I intentionally keep the design the way that it is possible to use it as a standalone as well.

Pobrania
390
Polubienia
52
Ocena
5
P
PrintablesBazzalight

Coffee Tamper Stand for SMEG 51mm basket

This is a stand to support the filter handle for a SMEG Expresso maker rather than just sitting the handle itself on the table surface when tamping down the coffee puck. The SMEG uses 51mm basket and the filter handle body is approx 60mm…

Pobrania
371
Polubienia
51
Ocena
5
P
PrintablesnoEntry

Coffee Funnel (51mm)

This is a 51mm coffee funnel that allows you to fill your sieve tray without getting everything dirty. Used printer settings: Filament: PETG Layer height: 0.24 mm Supports: Enabled Infill 15% Walls: 2 Bottom layer: 4 Top layer: 4

Pobrania
357
Polubienia
58
Ocena
5

Renault Clio MK3 RS200 Fog Duct Adapter 51mm

Printed in ABS+ small amount of tree supports needed 51mm Diameter end with anti slip ring. Donate now and make a difference in someone’s life!

Pobrania
340
Polubienia
27
Ocena
0
P
Printablesaplyard

Coffee Tamper 51mm

Coffee Tamper for 51mm Basket Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 25-100% Filament: Devil's Design PLA PC Gray Notes: Wall Line Width: 0.4 Wall Line Count: 4 Category:…

Pobrania
325
Polubienia
19
Ocena
4,75
P
PrintablesJorg

Espresso Portafilter Funnel 51mm

My grinder just dumps into a bin so I have to pour coffee grounds into my portafilter and it is a messy task. I saw a similar funnel on reddit and decided to make one myself. I had to sand it lightly to get a perfect fit. 51mm is the…

Pobrania
310
Polubienia
23
Ocena
5
Pobrania
301
Polubienia
56
Ocena
5
P
Printablesnhuhoai

Umikot 51mm base for De'Longhi EC680

Be careful, you need to change the needles size. Update: the needles size: In green: 22mm (4x) In yellow: 27mm (1x) In orange: 32mm (4x) In red: 37mm (1x)

Pobrania
285
Polubienia
30
Ocena
5

HSW Basket Remix - 51mm wide x 59mm long x 37mm deep

I like the original honeycomb box, but it is too small to hold my glue bottle. I did the lazy thing, here, and remixed the original to my specific needs. All I did was: import the original model into Microsoft 3D Builder split the hex…

Pobrania
284
Polubienia
53
Ocena
5
P
PrintablesSpongebob

Lightweight Sunlu spool adapter (73mm to 51mm)

I wanted a lightweight spool adapter for 73mm to 51mm spool. This one is only ~8g Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.30 Infill: doesn't matter Filament: Sunlu ABS Black Category: 3D…

Pobrania
281
Polubienia
30
Ocena
5
P
PrintablesOBA

Flexible SUNLU Filament Spool Adapter V2.0 (63mm to 51mm)

The SUNLU changeable filament spools (~63mm center hole, detachable parts to refill wound filament) have slightly different diameters on their left and right side. This makes adapters with fixed diameter to fit very tight (hard to remove…

Pobrania
244
Polubienia
21
Ocena
5
P
Printablesjevahir

COFFEE DISTRIBUTOR & TAMPER RING .PORTA BREW BETTER COFFEE: THE SIMPLE TOOL THAT MAKES A BIG DIFFERENCE 51MM

Give the Gift of Coffee by Making a Donation :) Coffee Aligner: The Story of Creation Origin of the Idea The idea for the Coffee Aligner came from the difficulties faced when aligning coffee beans for espresso making. Espresso cannot be…

Pobrania
230
Polubienia
22
Ocena
4,5
P
PrintablesFelixjordi

51mm (dedica) tamper and organisation station for bottomless portafilter

Compact solution to store and use portafilter, leveler and tamper.

Pobrania
229
Polubienia
60
Ocena
5
P
PrintablesCS

Hexagon Tamping Station for Delonghi EC 685 51mm Portafilter Tamper

After creating a hexagon-style drip-platform for the Delonghi EC685 (to published yet), a hexagon-style tamping station must be created. For my portafilter the fit is quite snug. If you want a more snug/loose fit, or your portafilter has…

Pobrania
228
Polubienia
21
Ocena
5
P
PrintablesLoai Z

Espresso Machine coffee tamper , mixer and distributor with base for 51mm portafilter

espresso portafilter 51mm needs a tamper, mixer & distributor, so here you can find all of them beside the base for them

Pobrania
216
Polubienia
30
Ocena
0
P
PrintablesHUGH

Leverpresso 51mm Spirographic WDT

Enhance your espresso-making precision with the Leverpresso WDT 51mm. Designed for the Weiss Distribution Technique (WDT), this tool helps break up clumps and evenly distribute coffee grounds in your portafilter, ensuring better…

Pobrania
207
Polubienia
14
Ocena
0
P
Printablesrevere521

Spectacular Desktop or Table Grommet - Cable Port - 2 Inch or 51mm

I had promised some time ago that i would post my not-keyboard stuff...and as i dig back through my files I'm occasionally finding suitable things that aren't one-off ridiculous widgets that apply only to the silly problems i make for…

Pobrania
206
Polubienia
33
Ocena
5

Magnetic dosing funnel for 51mm DeLonghi Dedica portafilter

After the wild success of my Dosing funnel for 51mm DeLonghi Dedica portafilter (531 downloads to date!) I bring you the long awaited update: Magnetic dosing funnel for 51mm DeLonghi Dedica portafilter Alongside all the features of the…

Pobrania
201
Polubienia
25
Ocena
5
P
Printablesthcecilia

DeLonghi Dedica Cup Tray Cover and 51mm Tool Holder (EC680/EC685)

As I was working on my friends Dedica, I got worried about scratching the fairly cheap chrome coating on top. I wasn't pleased with availabe designs as they didn't account for the ripples on top of the machine, so here we go. Holds two…

Pobrania
199
Polubienia
27
Ocena
0
P
PrintablesMaki97

51mm pipe bend / elbow cutting jig

Here is a jig for a 51mm pipe bend. This jig is made up of two part connected with two M6 allen bolts and nuts. It has markings for every 5 degrees but you can also use a protractor to set the angle of the bend. I made this in PETG so it…

Pobrania
193
Polubienia
29
Ocena
0
P
PrintablesUwe R

Ortlieb Fork-Pack adapter for Cube Nuroad Ex Fork 151mm

Ortlieb Fork-Pack Adapter für das Cube Nuroad Ex. Mit deinem Schrauben Abstand von 151mm.

Pobrania
184
Polubienia
6
Ocena
0
P
Printablesiapetus3D

Delonghi Dedica 51mm Portafilter Tamping stand (flat base)

Delonghi Dedica 51mm Portafilter Tamping stand (flat base)

Pobrania
177
Polubienia
14
Ocena
0
P
Printablesmycobuilder

Espresso 51mm portafilter dosing funnel

This dosing funnel sits on top of a 51mm tri-prong Gevi portafilter and allows you grind beans directly into the portafilter without spillage.

Pobrania
174
Polubienia
12
Ocena
0
P
PrintablesHohoha

Coffee Tamper Station (51mm Porta Filter)

This coffee tamper station is designed for Delonghi EC685 with original portafilter or 51mm bottomless portafilter. It is great for filling ground coffee and tampering in making your espresso.

Pobrania
173
Polubienia
17
Ocena
0
P
Printablesrayps

Espresso Tamper Station 51mm

I made this for my own 51mm portafilter. No compatibility guarantee. Optionally you can use the Seam Painting feature to place the seam on the inner side, with Aligned seam option.

Pobrania
164
Polubienia
28
Ocena
5
P
PrintablesGelo Official

51mm Tamper Station

Saw the original model and i liked the whole thing so i scaled it down and also added another version that includes cilinders inside the design to save on filament. My coffee setup Casa Brews 3700 Essential Bottomless and spouted…

Pobrania
155
Polubienia
18
Ocena
5
P
PrintablesCartridge_Man
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
154
Polubienia
29
Ocena
0
P
PrintablesDr_Eamy

Speaker grill for 51mm hole saw

Speaker grill for 51mm hole saw, pressure-fit, whit groves to dismount. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0,15 Infill: 20% Category: DIY

Pobrania
153
Polubienia
15
Ocena
5
P
PrintablesGrant Olson

Dosing Cup Adapter (Baratza Encore to 51mm Portafilter)

The Baratza Encore coffee grinder comes with a dosing cup that is intended for use with larger portafilters; I have a Delonghi Dedica with a 51mm portafilter, which is smaller than the dosing cup opening (meaning you cannot simply insert…

Pobrania
150
Polubienia
10
Ocena
5
P
PrintablesADIcrafts

51mm Coffee Portafilter Wall Mount / Shelf

Inspired by the talented design by jootoole ( https://www.thingiverse.com/thing:5214891 ). Made specifed for Delonghi EC680/685/885, or other 51mm portafilters (not tested). 2 slots for portafilter. The 1st mount slot for stock…

Pobrania
149
Polubienia
25
Ocena
4
P
PrintablesSputlegin

2" - 51mm - RC 3 Blade Spinner - 3dLabPrint Zivko Edge 540 48"

Needed a better more true spinning spinner for my 3dLabPrint 48" Edge 540. This one has prop access when mounted. Snug, centering hub fit for Eflite EFL01893 3 Blade 11x6 Propeller. Uses M3 Heatset inserts with M3x20mm screws. The tip…

Pobrania
149
Polubienia
9
Ocena
0
P
PrintablesTeo Vasilev

Coffee Tamper (51mm ; 58mm)

I don't know if all machines are standardized measure it this one is for diameter 51mm 58mm

Pobrania
148
Polubienia
17
Ocena
0
P
Printablesradekrac

Cable gland - diameter 44mm/51mm/55mm/57mm/60mm/64mm/76mm

Cable gland to the work table. Diameter 44mm/51mm/55mm/57mm/60mm/64mm/76mm Board thickness 25mm and 40mm

Pobrania
147
Polubienia
16
Ocena
5

51mm adaptor for Fellow Opus catch cup

Fits a 51mm portafilter to use with the Fellow Opus catch cup. Line it up and dump it in. The side walls will keep the mound of grounds in place if you use a wire distributor. Food safe at your own risk.

Pobrania
147
Polubienia
5
Ocena
0
P
PrintablesDavisPropsInc

7.62×51mm NATO/.308 Winchester Prop

7.62×51mm NATO is nearly identical to .308 Winchester, and is the same caliber used by the Halo MA5B assault rifle. -Use for cosplay, short films, display piece, etc. -Should not be used with real firearms -Please use responsibly Print…

Pobrania
137
Polubienia
21
Ocena
5
P
PrintablesEugene Levinson

Espresso Dosing Funnel 51mm

Just a simple espresso dossing funnel. Nothing more, nothing more. Just put it on and twist it. This dosing funnel is for a 51mm in diamiter portafilter. Happy coffee making!

Pobrania
137
Polubienia
11
Ocena
5
P
PrintablesvoidThread

Coffee tamper 51mm

The simple coffee tamper with unscrew handle. Default size is 51mm, but I'm sharing also file for fusion360, so you can change size to the other. Materials: base - choose best one for contact with food. My choice is black PLA. handle -…

Pobrania
136
Polubienia
19
Ocena
5
P
PrintablesFyfo

De'Longhi Dedica - Sage Smart Grinder Pro - Dosing Funnel (51mm)

The dosing funnel is designed to prevent mess, while also using the “push portafilter to start grinding” function. Top fits the Sage Smart Coffee Grinder Pro. Bottom fits the Neouza 51mm Bottomless Portafilter (which attaches to De'Longhi…

Pobrania
136
Polubienia
8
Ocena
5
P
PrintablesFENIX Gaming

Simple Espresso Tamper 51mm

Espresso Tamper for 51mm portafilter. Diameter is 50mm printer with 30% infill for strength on PLA 0.2mm Printed on Ender 3 S1 Pro

Pobrania
133
Polubienia
12
Ocena
5
P

Star Grommet - TPU 51mm

A 51mm “Star Grommet,” a name I believe was made up at the time of design. :) The intended purpose is to be slit along the star shape, allowing the wire to pass through and offering some seal against dust or heat… like in a printing…

Pobrania
119
Polubienia
12
Ocena
0
P
Printableskinkis

Coffee dosing funnel ( ~51mm)

Print instructions: Layer height : 0,15mm Filament : PLA or PETG No supports needed Enable ironing for smoother top ring surface UPDATE : added new STL with longer bottom part

Pobrania
119
Polubienia
5
Ocena
0
P
PrintablesLuddi

Tamper 51mm

This is a tamper with 51mm diameter.

Pobrania
117
Polubienia
4
Ocena
0
P
Printablestoomuchcoffee

Portafilter Funnel 51mm

Made for 51mm portafilter (Delonghi Dedica) and for my 1Zpresso J-Max hand grinder. After distributing the coffee in the portafilter and removing the funnel, there might be a slit on the edges where the funnel was located. Just give the…

Pobrania
117
Polubienia
13
Ocena
5
P
PrintablesSmolík

Garmin fenix 8 51mm kryt

kryt na Garmin fenix 8 51mm PETG stromové podpěry

Pobrania
116
Polubienia
3
Ocena
0
P
PrintablesDaniSC

Tamper 51mm Cecotec Cafelizzia

Tamper de 51 mm. Diseñado en Fusion 360. Relleno: 20% Altura de capa: 0.02 Material: PLA

Pobrania
112
Polubienia
8
Ocena
0
P
Printablesiano0100

51mm portafilter tamping holder

A 51mm portafilter tamping holder (made for this filterholder from aliexpress). no supports needed, print with at least 3 walls and 4 top layers and 15% infill.

Pobrania
111
Polubienia
12
Ocena
5
P
PrintablesStepanKTM

51mm Tamper

Tamper 51 mm for lever coffee machine.

Pobrania
110
Polubienia
8
Ocena
5
P
Printablesaa.aron

Ortlieb Fork-Pack adapter for Fork 151mm (Cube und Radon)

Adapter für die Halterung des Ortlieb Fork-Packs. Passend für Fahrräder mit einem Schraubenabstand von 151mm an der Gabel wie das Cube Nuroad oder das Radon Regard. Für die Befestigung der Halterung am Adapter empfehle ich die…

Pobrania
106
Polubienia
7
Ocena
0
P
PrintablesMohammad Groof

51mm Puck screen Holder

51mm Puck Screen Holder. It holds 2 puck screens.

Pobrania
103
Polubienia
9
Ocena
0
P
PrintablesOBA

Flexible SUNLU Filament Spool Adapter (73mm to 51mm)

The SUNLU filament spools (~73mm center hole) have slightly different diameters on their left and right side. This makes adapters with fixed diameter to fit very tight (hard to remove again) or too loose, so they can slip out while…

Pobrania
101
Polubienia
10
Ocena
5
P
PrintablesJesse

Gridfinity Drawer Spice Rack (51mm)

A remix of an excellent spice rack but suited to fit up to 51mm spices that seem to be more common in my area.

Pobrania
99
Polubienia
21
Ocena
0
P
PrintablesMarcinLfr

Wall mount for 51mm portafilter

This is a 51mm portafilter mount that can be mounted on a wall using two screws. Printed with no supports. This is a part of my coffee cupboard organiser.

Pobrania
91
Polubienia
7
Ocena
0
P
PrintablesSe9n

Umikot 51mm with Magnets

Non-Printed Parts Needed 4 M3 Threaded Inserts 23 Magnets, 6x2 mm 4 3m Screws 12mm long 4 3m Washers 4 3x10x4mm Bearings 4 O-Rings 1/8 x 3/64 10 0.35mm acupuncture needles 44 BB's Super Glue You can see the model on TinkerCad Print the…

Pobrania
91
Polubienia
23
Ocena
5
P
PrintablesRafał

Funnel end distributor to coffee Delonghi 51mm

Lejek z dystrybutorem do kawy kolba Delonghi 51mm, pla, petg

Pobrania
89
Polubienia
6
Ocena
0
P
Printablessupjj

51mm portafilter funnel

I printed this in ABS with the large funnel side facing down on the build plate. designed for my KitchenAid KCG0702CS Burr Coffee Grinder which has a huge outlet, the funnel can be smaller by follow below instructions Important read below…

Pobrania
87
Polubienia
5
Ocena
5
P
Printablesbrass_ring

7.62X51mm Stacking Loading Block

7.62X51mm stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes

Pobrania
87
Polubienia
8
Ocena
5
P
PrintablesJohn Barron II

51mm Portafilter Filter Cutter

This tool is dangerous, use at your own risk!!!!! I used @mchangcreative design as the basis for this creation. The centerpiece that holds down the filter paper is now print in place. This makes the workflow a slight bit simpler. I…

Pobrania
83
Polubienia
13
Ocena
5
P
PrintablesEsteban93.sc

Portafilter Holder for 51mm Krups Espresso Virtuoso Coffe Machine ESC

I resized the design to fit a 51mm Portafilter and adapt it to the thickness of the notches of the model.

Pobrania
82
Polubienia
16
Ocena
5
P

51MM COFFEE TAMPER

Throw away that poopy garbage tamper your de' longhi or other 51mm espresso machine came with and you this bad boi instead Category: Kitchen & Dining

Pobrania
80
Polubienia
2
Ocena
5
P
Printablesbreadbauer

DeLonghi Dedica KG521M grinder insert for 51mm dosing cup

The original insert for the grinder always made a huge mess during and after grinding. So I remixed an insert off thingiverse to also hold a dosing cup. (dosing cup)…

Pobrania
79
Polubienia
6
Ocena
0
P
PrintablesFree Pathic

Coffee Puck Remover 51mm

To remove coffee puck from portafilter

Pobrania
78
Polubienia
8
Ocena
0
P
PrintablesDaniel Frank

Espresso Tamper - 51mm lever

Two version of tamper designed for 51mm lever. Design aims for comfortable pressing with bigger handle as well as strenght so that part last a while. First version is flat, second is ribbed to give the coffee puck distinct look. I…

Pobrania
76
Polubienia
6
Ocena
0
P
Printablesdemjansein

IKEA Malm Headboard (51mm) CPAP hose holder with mask-hook

added a Version without a hook, which is sturdier (CPAPMALMV2)

Pobrania
72
Polubienia
4
Ocena
0
P
PrintablesSteven

bottle holder for Ikes Skadis T-Nuts 51mm/81mm

Bottle holder for Ikea Skadis T-Nuts in 51 and 81mm. Screws: M2,5 Skadis T-Nuts: https://www.printables.com/de/model/228663-skadis-t-nuts-mounting-system-for-ikea-skadis-pegb

Pobrania
71
Polubienia
10
Ocena
0
P
PrintablesCrampy

Coffee Tamper (51mm for 52mm baskets)

Yet another Coffee tamper for 52mm filter baskets. Tamper has a 51mm diameter. Works well with the old Delonghi coffee machine I have (that only came with a fixed integrated tamper) Recommend using a “concentric” top/bottom layer pattern…

Pobrania
70
Polubienia
9
Ocena
5
P
PrintablesBoysie

hydroponics nft net cup for 51mm hole blocking light

hydroponics nft net cup for 51mm hole blocking light 5 Diffrent insert shapes, 25mm x 25mm Rockwool cube 20mm rockwool plug 20x20mm cube/cottenwool ball 41mm Jiffy pellet Normal - No shape just a netcup depth of 50mm but scale back if you…

Pobrania
66
Polubienia
9
Ocena
0
P
Printablesjasonpedals

Garmin 51mm Fenix Quarter-turn Bike Mount

The part should fit most Garmin devices with a 26 mm band, but has only been tested on a Fenix 7x and Fortrex 801. I originally designed this part to fit a Fortrex 801 on my Fatbike for winter adventures. There were numerous iterations…

Pobrania
65
Polubienia
9
Ocena
0
P
PrintablesMrMcMuffinJr

51mm Distributor for Portafilter

Couldn't find any so I decided to make my own. under-sized the bottom a tiny bit to ensure fit in all 51mm filters. Weight keeps it stable whilst spinning.

Pobrania
62
Polubienia
8
Ocena
0
P
PrintablesPatrick

51mm coffee funnel

This is a simple 51mm coffee funnel. Not good, not terrible. Fits the portafilter of the famous De'Longhi Dedica. Printed with PETG / 15% infill, but PLA should work too. No supports needed. With PETG, you get a nice stringing test,…

Pobrania
61
Polubienia
11
Ocena
0
P
PrintablesDave Halderman

Coffee dosing funnel and tamper for 51mm Delonghi

This is designed to fit a 3-lug portafilter with a 51mm ID and a 62mm OD. It is held in place by 8 5mm(dia)x3mm(thick) magnets. The magnets friction fit in the holes and are installed after the print is finished. They're cheap and readily…

Pobrania
61
Polubienia
2
Ocena
5
P
Printableszurbrueggd

Compact Tamping Stand for 51mm Portafilter

This is a compact tamping station designed for 51mm portafilters (3-ear type), compatible with machines like the DeLonghi Dedica and Tchibo Lapressa. Tested with an Tchibo Lapressa The portafilter rests securely on the top edge,…

Pobrania
61
Polubienia
9
Ocena
0
P
PrintablesGuardTower

51mm Paper filter dispenser for espresso machines

The build can be printed as a stand alone, but I created it as an attachment for my Wall hanged portafilter station https://www.printables.com/model/284417-wall-hanged-portafilter-station-for-delonghi-stilo I printed mine using PLA ,…

Pobrania
60
Polubienia
13
Ocena
0
P
PrintablesGuardTower

Delonghi Stillosa 51mm 2 ears Porta holder (Type 1 )

Portafilter holder for Delonghi stilosa

Pobrania
59
Polubienia
11
Ocena
0
P
Printableswisewolfthebunn

.308 Winchester NATO 7.62x51mm breach safe flag

Breach safe flag for NATO 7.62x5.56mm .308 Winchester rifles, tested on Ishapore Lee Enfield rifle. Print Tips: Tested in 0.3mm Layer height 4 perimeters (0.6mm nozzle) 30% infill (impact weakness is along layer lines)

Pobrania
59
Polubienia
6
Ocena
0
P
PrintablesMichel

Gipskartonplatte Loch Abdeckung 50-51mm Durchmesser - Plasterboard hole cover 50-51mm diameter

Gipskartonplatte Loch Abdeckung 50-51mm Durchmesser Abdeckung für ein 50-51 mm Loch in einer Gipskartonplatte. Plasterboard hole cover 50-51mm diameter Cover for a 50-51 mm hole in a plasterboard.

Pobrania
58
Polubienia
6
Ocena
0
P
PrintablesOBA

Flexible SUNLU Filament Spool Adapter V2.0 (58mm to 51mm)

The SUNLU reusable filament spools (~58mm center hole, detachable parts to refill wound filament) have slightly different diameters on their left and right side. This makes adapters with fixed diameter to fit very tight (hard to remove…

Pobrania
56
Polubienia
11
Ocena
5
P
PrintablesYiersan

Tamping station Portafilter Normcore 51mm Delonghi EC685

Needed a tamping station and i didn't find anything that could fit the Normcore 51mm 3 ears for my coffee machine. So i had no choice to modelize one for me at least :'-( A remix / Inspired from…

Pobrania
53
Polubienia
4
Ocena
0
P
Printablessonnyc

2-inch (51mm) Mini Squares

I wanted a small square to help calibrate my table saw and miter saw blade to 90 degrees.

Pobrania
53
Polubienia
9
Ocena
5
P
Printablessupjj

51mm Portafilter funnel

easy dump dose of ground espresso ready for tamping. My tamper fits perfectly through the funnel so all grounds go where they should with no mess. I found it best to print the model with the open funnel part down facing the print bed. I…

Pobrania
51
Polubienia
2
Ocena
0
P
Printablesivan.stefanov

Silvercrest coffee funnel 51mm

Print Settings Printer: Prusa MK4S Supports: Yes Resolution: 0.15 Infill: 15% 30+ might be better Filament: PETG PLA was not tested

Pobrania
51
Polubienia
4
Ocena
0
P
PrintablesFlo Heman

Support Post 51mm (e.g. for PCBs on MHP30)

Support Post with 51mm hight. General purpose. Built for soldering large PCBs on MHP30

Pobrania
50
Polubienia
7
Ocena
5
P
PrintablesBarnJoey

51mm Espresso dosing funnel for Wirsh

This funnel is designed to fit on the portafilter that comes with the wirsh espresso machine put the funnel on, place in coffee grounds, tamp, then remove funnel

Pobrania
49
Polubienia
5
Ocena
0
P

Umikot 51mm base for NEOUZA Bottomless Portafilter

This model is adjusted to fit the NEOUZA 51mm Bottomless Portafilter from amazon.

Pobrania
47
Polubienia
4
Ocena
5
P
PrintablesSaull

51mm Portafilter stand (Delonghi)

Simple portafilter stand for 51mm portafiter like Delonghi

Pobrania
47
Polubienia
5
Ocena
0
P
PrintablesMario Liang

Barbell Collar with Magnet for Olympic or Any bar around 48-51mm

Barbell Collars attach firmly and securely to any bar with a sleeve diameter ranging from 47.5mm - 50.9mm. The collars are compatible with Olympic bars and powerlifting bars as well as most logs, cambered bars, Swiss bars, and safety…

Pobrania
47
Polubienia
7
Ocena
0