Wyniki wyszukiwania: 580

Sortowanie

147 modeli

P
PrintablesD Mio

Brennenstuhl 1951580101 Steckdosenleisten Clip

After printing, bend the inner part out slightly so that it can snap into place later. Printing in PETG 15% Infill 0.20mm Quality

Wydruk około 0,67 €–0,82 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
100
Polubienia
11
Ocena
5

Star Trek TR-580 Tricorder Kit

Here is my take on the tricorder featured on the later seasons of Star Trek: The Next Generation. It has the option of being a standard science tricorder and can be converted to a medical tricorder using magnets to swap parts. Update log…

Pobrania
2172
Polubienia
396
Ocena
4,9
P
Printablesthall72

Lego Compatible (65803.dat) Technic Brick 16 x 16 x 1.333

This model is compatible with the lego system.

Pobrania
770
Polubienia
65
Ocena
5
P
Printablesthall72
Pobrania
647
Polubienia
36
Ocena
0
P
PrintablesLambtor

Star Trek Next Generation Tricorder - TR-580 v1 (arduino)

2026.01.13 - Moved github links to codeberg. 2024.01.17 - Adafruit has a replacement for the main arduino board now. No code changes will be required, as the only change is to the accelerometer. The codeberg code doesn't use the…

Pobrania
642
Polubienia
169
Ocena
5
P
PrintablesEmveor

MT-58008 "Walker" Tank

Fun and easy to assemble. Comes with a Quick guide for assembly.

Pobrania
604
Polubienia
377
Ocena
5
P
PrintablesJEO

DeWalt DCV517, DCV580 Vacuum Hose Attachment Tools or other hose end around 32mm or 1-1/4"

I bought this DeWalt DCV580 at a thrift store with only the hose. I needed attachments and made these with a way to store the extras. Crevice Tool: Similar to the original and also clicks into the DeWalt handle for storage and will not…

Pobrania
557
Polubienia
178
Ocena
4,83
P
PrintablesOnemoredave

Bestway pool pump filter cartridge - Type 1 - 58093

Fits pretty much perfectly into the bestway flowclear pump model 58381. As far as I can work out, it is the Type I Version of the filter with model# 58093 which is 80mm in diameter and 90mm tall. Print two caps out of tpu and the inner…

Pobrania
455
Polubienia
73
Ocena
5
P
PrintablesAndrew

Thinkpad E580 stand

A desktop stand for Lenovo laptops. Works with Thinkpad E580 and E480 so far, with a holder for the USB-C Thinkpad dock. Holds the laptop at a 30° angle, with the base of the screen roughly 15cm above the desk. Has small recesses…

Pobrania
438
Polubienia
32
Ocena
4
P
PrintablesMattas

Magnetic wall mount for Samsung Galaxy Tab A 10.1" Wi-Fi (SM-T580)

Wanted to repurpose my old Galaxy Tab as a home automation display. Noticed that this tablet model has built in magnets on the backside, probably for a flip cover. Mapped the placing of the magnets and made a thin bezel wall mount that…

Pobrania
426
Polubienia
29
Ocena
4
P

Lego tire (6579) and wheel (6580a)

Printed in TPU/FLEX Tire 43.2 x 28 S Balloon Small : Part 6579 | BrickLink Wheel 43.2 x 28 Balloon Small with Axle Hole (+ Shape) : Part 6580a | BrickLink

Pobrania
352
Polubienia
53
Ocena
5
P
Printablesdaver18qc

Huina 1550 / 580 Ripper

Ripper for the Huina 1550 / 550 Excavator Needs (3x) M2x8 screws for the pads OR use it without pads for easier ripping in hard ground V2 corrects a clearance issue with my Spring Coupler ( https://www.thingiverse.com/thing:3732951 )…

Pobrania
336
Polubienia
17
Ocena
5
P
PrintablesJEO

Dewalt DCV580H Vacuum Muffler

This is an attachment that will reduces the noise coming from the exhaust port. Best to print port with small side down with brims to hold it down. I also printed with no supports. The reason for small side down is, if large side down…

Pobrania
323
Polubienia
58
Ocena
5
P
Printablesanonxyz

ThinkPad T470 T480 T570 T580 T25 24Wh Battery

1:1 Model of a 24Wh battery for ThinkPad T470/80 T570/80 and T25. It locks in place securely, the mechanism on the left latch works as intended. I made it because I mostly use my laptop on a charger/docking station but didn't want a…

Pobrania
269
Polubienia
19
Ocena
4
P
PrintablesJannisJFry

Makita 18V LXT battery portable lab bench power supply (XY-S3580-W WiFi)

I added a step of the whole thing, if you need to improve/modify it. You will need the following parts: Makita Terminal Adapter (Search for Makita Terminal Adapter on AliExpress) OR: https://www.printables.com/de/model/200596 80W 5A WiFi…

Pobrania
243
Polubienia
52
Ocena
5
P
Printablesdejv203

case ih steiger 580 . full ready to print

case ih steiger 580 . full ready to print

Pobrania
234
Polubienia
41
Ocena
0
P
PrintablesMr.someone

rx 580 armour oc backplate

rx 580 armour oc backplate

Pobrania
225
Polubienia
10
Ocena
0
P
PrintablesPejek

HDD SSD Hard Drive Caddy Bracket for Lenovo Thinkpad T470 T480 T570 P50 P51 P70 P71 P72 E460 E580 E15 R14 E14 T14 S3 Caddy Holder

2.5" Drive HDD / SSD Laptop Drive Caddy Disk Tray Bracket for Lenovo ThinkPad. Compatible Models: For Thinkpad T470 T480 T570, For Thinkpad P50 P51 P51S, For Thinkpad P70 P71 P72, For Thinkpad E460(NOT E470), For Thinkpad E480 E485 R480,…

Pobrania
213
Polubienia
20
Ocena
0
P
PrintablesSE3Dtech

EGO 580 CFM Leaf Blower Stubby Attachment

Stubby attachment for for EGO LB5800 (580 CFM) Leaf Blower. Includes crush ribs on the interior for a more flexible fit and a twist lock mechanism. Useful for blowing off car, gutters, etc. Depending on your printer's settings and…

Pobrania
205
Polubienia
40
Ocena
5
P
Printableskpkp

Case for XYS3580 Buck Converter, bench power supply

Compact little home for the XYS3580. Print instructions Requirements: 4x M4 8-12mm countersunk bolts (for attaching the bottom) 2x M3 4-6mm to attach the "tepih" (optinal) XYS3580 DC DC Buck Boost Converter 5.5 x 2.1mm DC Power Male…

Pobrania
199
Polubienia
17
Ocena
4

Allis-Chalmers 7580 4WD - 1:16th Scale

Allis-Chalmers 7580 4WD - 1:16th Scale Uses M4 and M2 screws

Pobrania
196
Polubienia
19
Ocena
0
P
Printablestboss

Eachine LCD 5802D 5802S 5,8 Ghz FPV Monitor Stand

To assemble the stand all you need is 1 x M3x20 screw and nut. You can find this great 7' Eachine monitor here: https://bit.ly/39uZf9U Other sizes and types of FPV monitors: https://bit.ly/3aqM2A9

Pobrania
182
Polubienia
11
Ocena
4,5
P
Printablesdaver18qc

Huina 550 / 1550 / 580 Spring Coupler Remix

Spring-loaded coupler compatible with the Huina 550 / 1550 or 580 V5 has more clearance added for the bucket, lock and bolts parts. Shouldn't need much filing/sanding. Also added a bevel to make hooking a bucket easier. If V4 worked fine…

Pobrania
177
Polubienia
18
Ocena
5

case for: xys3580 / DPS5005 / U6229 power supply

This model is a remix of https://www.thingiverse.com/thing:2975884/remixes It has an improved ventilation holes on the back because the last model suffocated. I have also removed the banana connectors on the output and left only the…

Pobrania
149
Polubienia
22
Ocena
0
P
PrintablesCisco

Nakamichi 480/580 door eject fix

Constantly repairing the eject linkage, especially with the 480/580 decks, I designed and 3D printed a replacement part engineered for a snug interference fit. The fit is tight enough that the ferrule will dent before the part slides, but…

Pobrania
149
Polubienia
2
Ocena
0
P
PrintablesMATHOBB

DELL Latitude 5580 M.2 holder

Simple m.2 SSD drive holder for DELL Latitude 5580 M2 threaded inserts must be installed after the model is printed

Pobrania
146
Polubienia
6
Ocena
0
P
PrintablesSE3Dtech

EGO 580 CFM Leaf Blower Wall Mount

Wall mount for the EGO 580 CFM Leaf Blower. This print attaches to the wall with 2 screws and fits into the keyhole slot. Recommendations: Mount directly to a stud or wood panel that is secured to stud. Strong drywall anchors may also be…

Pobrania
145
Polubienia
23
Ocena
0
P
PrintablesRoB Bert
Pobrania
135
Polubienia
3
Ocena
0
P
PrintablesNe2424

Redragon K580 Tilt Stand

I printed this on my Ender 5 took ~8 minutes at 80mms. It is a tight fit in the keyboard but works great. Material: PLA Infill: 100%

Pobrania
117
Polubienia
10
Ocena
0
P
PrintablesLibor Jandus

Šroub s okem, DIN 580, M10 (Lifing eye bolt DIN 580, M10)

Jedná se o model šroubu s okem dle DIN 580 a se závitem M10. Rozměry odpovídají skutečnému šroubu s okem. Výtisk na fotogrfiích je proveden při výšce vrstvy 0,2. Doporučuji ale jemnější tisk kvůli jemnosti závitu. Tiskárna: Longer LK5Pro…

Pobrania
114
Polubienia
10
Ocena
5
P
PrintablesRygar1432

RX5808 PRO PLUS cover for Fatshark Dominator V3

This is a cover for the Realacc RX5808 Pro Plus module. Fits very snugly and covers completely around all the edges. Printed with nylon Taulman 910 alloy or PETG. Module snaps into the case/cover and then snaps into your goggles. I…

Pobrania
102
Polubienia
3
Ocena
0
P
Printablesdaver18qc

Huina 550 / 1550 / 580 Electric Coupler

Huina Excavator Electric Coupler * Use the 580_ labeled files for the 580 / 1580 v1 v2 v3 v4 UPDATE Someone made a printable lead screw version for use with "D-shaft" N20 motors. "Electric_LEAD_Lock.stl" "LEAD_Screw.stl" ! Thanks to m.…

Pobrania
100
Polubienia
8
Ocena
0
P
PrintablesTinglis148

SAB Goblin Kraken 580 Battery Tray

This is the tray I designed to fit the SAB Goblin Kraken 580 R/C Helicopter Note, Fly hard at your own risk, I have flown these pretty hard and they haven't shown any signs of failure but obviously fly at your own risk, 100% infill…

Pobrania
98
Polubienia
3
Ocena
4
P
PrintablesGiovanni1954

ORGANIZZATORE GT580

ORGANIZZATORE GT580 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Combo Anycubic Kobra S1 Laser: Mecpow X3Pro 10W

Pobrania
93
Polubienia
28
Ocena
0
P
PrintablesMrToToRo

SAB Goblin 580-700 Battery Tray

Tried printing from both PLA and PETG, both options work perfectly.

Pobrania
92
Polubienia
1
Ocena
0
P
Printablesflo_underscore

FrSky TWIN Antenna Mount for SAB Kraken 580

This is an antenna mount for a pair FrSky TWIN antennas. It is designed to be mounted on the back of the elevator servo (low-profile, full-size, not mini) of a SAB Kraken 580. The sleeve portion of the dipole antenna snaps in place and…

Pobrania
89
Polubienia
5
Ocena
0
P
Printableschavotronic

Magnetic wall mount for Samsung Galaxy Tab A 10.1" Wi-Fi (SM-T580)

Magnetic wall mount for Samsung Galaxy Tab A 10.1" Wi-Fi (SM-T580)

Pobrania
87
Polubienia
6
Ocena
0
P
PrintablesNovak Martin

Spare part 807035801 8070358018 Mounting Holder Bearing Headboard for Spray Arm, AEG, ZANUSSI, ELECTROLUX, WHIRLPOO

Dishwasher spare part 807035801 8070358018 Mounting Holder Bearing Headboard for Spray Arm For: AEG, ZANUSSI, ELECTROLUX, WHIRLPOO

Pobrania
82
Polubienia
1
Ocena
0
P
PrintablesColLynch

Dell Latitude 5580 Upright Laptop Stand

2 Position upright stand for Dell Latitude 5580 laptop. Laptop stand with 2 separate positions for the laptop to slot into. This is primary for raising the height of the laptop screen to a more ergonomic position. Most suitable for use…

Pobrania
81
Polubienia
10
Ocena
5
P
Printablesthall72

Lego Compatible (32580.dat) Technic Axle Flexible 7

This model is compatible with the lego system.

Pobrania
78
Polubienia
11
Ocena
0
P
PrintablesBuckNova

XYS3580 Power Supply Case

A case for the XYS3580. It supports Anderson PowerPole connectors out of the box. Rear fan design to help with venting any heat. It has room for a 24v switching power supply. I've included a F3D and STEP file for those who want to make…

Pobrania
74
Polubienia
7
Ocena
0
P
Printablesfjkraan

Console case for XY-SK35 / XYS3580 DC DC converters

The SK35 or XYS3580 DC/DC converters are sold by Banggood. The wire-clip connector an be found at ebay: "MULTICOMP - MC02194 - CONNECTOR, LOUDSPEAKER, DUAL, PK2". The power plug is also ebay: "DC Power Chassis Jack/Plug Socket 5.5/2.5mm",…

Pobrania
73
Polubienia
3
Ocena
0
P
Printablesbjoern85

BetaFPV HX115 HD canopy pandaRC vt5804air mod

Canopy for the famous betaFPV HX115 HD It is made to mount a pandaRC vt5804_AIR in it. I added a Lumenier Micro AXII Shorty to it as well :-) You need some support to print it. I made mine from TPU. Happy printing and flying ;-)

Pobrania
71
Polubienia
6
Ocena
0
P
Printablesthall72

Lego Compatible (35809.dat) Minifig Pen

This model is compatible with the lego system.

Pobrania
68
Polubienia
17
Ocena
0
P
PrintablesMilkey_Mouse

Steelex D2580 Caster Wheel

Accurate, jointed model of the Steelex D2580 solid rubber swivel caster wheel. Seems the original product isn't still on Amazon, but this one looks very similar save for the lack of black paint: https://www.amazon.com/dp/B07DGQ8WTY The…

Pobrania
67
Polubienia
7
Ocena
0
P
PrintablesEvan000

DeWALT 20V MAX Cordless Wet/Dry Vacuum DCV580/DCV581H Clamshell Insert Replacement

This a replacement insert that is used by the clamp on the lower section to hold the shop vac together. It seems DeWalt has two parts for this part number. One with wider pin and one with narrow pins. Both versions are included here.…

Pobrania
67
Polubienia
6
Ocena
0
P
Printablesok1bpn

Box for HYMER MLT-580

Box for shelf above seating in Hymer MLT 580, release 9/2025 Biggest possible size for printer Prusa MK4S printer - length 248mm x depth 125mm x height 120mm

Pobrania
65
Polubienia
1
Ocena
0
P
Printablesthall72

Lego Compatible (5809.dat) Tire 11/ 14 x 11

This model is compatible with the lego system.

Pobrania
62
Polubienia
10
Ocena
0
P
Printablesthenicnet

Thick HDD Riser & Standoffs for Minisforum UM560/UM580

I wanted to install a 2.5" 5tb HDD into this newer mini-pc, but the darn thing was too small. With the power of Fusion 360 I modeled an adapter to accommodate the extra girth. You will need longer M2.5 screws. I have texted M2.5x20mm…

Pobrania
59
Polubienia
7
Ocena
0
P
PrintablesJakub Klimša

Bestway bazénový filtr – typ I – 58093

Docela perfektně pasuje do průtokového čerpadla bestway, model 58381. Pokud mohu zjistit, je to verze filtru typu I s modelem # 58093, který má průměr 80 mm a výšku 90 mm. Vytiskněte dvě čepice z tpu a vnitřní a vnější rámečky z čehokoli,…

Pobrania
55
Polubienia
7
Ocena
0
P
PrintablesDeal101

Jabra Heatphone Stand for Lenovo L580 Laptop

Headphone holder for a Jabra headset for my Lenovo L580 laptop. The holder is attached to the right-hand corner of the laptop. Printed with a Prusa Mini+. Support should be activated.

Pobrania
53
Polubienia
8
Ocena
0
P
PrintablesPeterthinks

45 degree miter slide for a Dremel 580-2 4" table saw.

A small fixed 45 degree miter gauge for a Dremel 4 inch table saw. If you are lucky enough to find one of these chances are it didn't come with any accessories. Keep an eye out for future upgrades to my very dangerous (and useful!) Dremel…

Pobrania
52
Polubienia
5
Ocena
0
P
PrintablesConroeTony

Dewalt Cordless Vacuum (Model DCV580HR) Replacement Latch

This is a replacement latch for the Dewalt Cordless 20V Wet/Dry Vacuum (DCV580HR).

Pobrania
51
Polubienia
16
Ocena
5

ASUS RX580 gpu shroud

BOM Part Quantity 92x25 mm fan 2 cable adapter PH2.0 to 2x 4pin 1 M5 fan screw 10 M3x6 screw 4 M3 L4xD4,5 heat-set nut 4

Pobrania
51
Polubienia
8
Ocena
0
P
Printablesquirxi

Case for XYS3580 Buck-Boost Converter.

A very minimalistic and small case for the XYS3580 buck-boost converter. It's meant to protect the electronics on the ba

Pobrania
51
Polubienia
3
Ocena
0
P
PrintablesDamien Staebler

Tripod Quick Release ( Sunpak Platinum+ 5800D )

20% infill should be good enough and no support material needed.

Pobrania
49
Polubienia
1
Ocena
0
P
Printablesrjt21

Lenovo T580 USB-C support clip

Lenovo T580 USB-C support clip built using Fusion360 and printed in PETG on Ender 5Plus.

Pobrania
48
Polubienia
1
Ocena
0
P
PrintablesMurdoc

DPS5005 / XYS3580 power supply module case

Module case for several power supply modules (DPS5005 / XYS3580….) There a two version (with or without space for external power supply). Version1: Bottom_Part_placeholder.stl + Upper_Part.stl An old power supply (e.g. from and old…

Pobrania
48
Polubienia
6
Ocena
0
P
Printablesflo_underscore

SAB Kraken 580 Spirit GeoLink V2 Mount

This mount is supposed to be attached using 3M tape to the boom. First position it with the protective film still on the tape to figure out where it is meant to go. I printed with BambuLabs Blue PLA that matches the blue of the Kraken…

Pobrania
47
Polubienia
2
Ocena
0
P
PrintablesOlivia Smith

Hunter Ceiling Fan Remote Holder K5580-04

Add a command strip on the back and stick it to your wall. You may need to sand the back a little for the command strip to stick.

Pobrania
47
Polubienia
3
Ocena
0
P
Printablesfsanders

AmScope ME580 Microscope Rotating Stage Inserts

I recently got an Amscope ME580 ‘metallurgical’ microscope. I'm an electrical engineer/RFIC designer and my main use of [this] microscope is to take photos of and analyze integrated circuits… Unlike biological/metallurgical samples,…

Pobrania
47
Polubienia
4
Ocena
0
P
Printablesmiyconst

Fan adapter for passive cooled ex-mining AMD RX 580 8GB 2048SP

Simple 92mm and 120mm fan mount for a unique ex-mining AMD RX 580 8GB 2048SP with a passive cooler and a single HDMI port. I could not find any info on this particular model but this card on AliExpress seems to be using the same cooler. I…

Pobrania
46
Polubienia
6
Ocena
0
P
PrintablesJakub Klimša

Filtr Bestway typ II 58094

Jedná se tedy o opakovaně použitelný filtr pro pumpu Bestway, typ II 2 nebo 58094, o průměru 106 mm a výšce 136 mm. Koncové části (víčko) by měly být nejlépe potištěny v PLU, zbytek v ABS nebo PETG. Mezi stěny pak jednoduše vsuňte látku,…

Pobrania
45
Polubienia
3
Ocena
0
P
PrintablesIgor

Laptop charger/power port reinforcement (Lenovo L580)

I recently bought Lenovo L580 which is (like all nowadays laptops excluding GETAC) powered by mechanically weak USB-something port that would break if you even look at it from wrong angle. Solution is easy and strong enough. Add a frame…

Pobrania
45
Polubienia
2
Ocena
5

RX580 90mm fan shroud

This is a remix of the original model by Quickset45 . I bought it, but it did not fit the cooling fans I bought on AliExpress. So I remodeled it that the 90mm fans could rotate freely in the case. I also changed the way the inner (white)…

Pobrania
44
Polubienia
4
Ocena
0

VAG VW Passat Golf MK2 Bumper side holder 165807193

Volkswagen Passat Golf MK2 Rear bump holder VAG part number 165807193

Pobrania
40
Polubienia
0
Ocena
0
P
PrintablesString0Fellow

Lenovo Thinkpad T580 SSD Caddy

This caddy is used to mount an M.2 SSD and the Lenovo SSD adapter board so it fits inside a Thinkpad P52s 2.5" hard drive recess. I bought a used Thinkpad and the previous owner had removed the SSD for security, but also removed the…

Pobrania
40
Polubienia
10
Ocena
0
P
PrintablesPeterthinks

90 degree miter for 4 inch Dremel 580 table saw

No supports. Between this and my 45 degree one this covers 99 percent of the cuts I make. Keep your fingers clear! Made with https://www.reprapwarehouse.com/ blue 1.75mm PLA Category: Machine Tools

Pobrania
39
Polubienia
9
Ocena
0
P
PrintablesZuraw

Toyota 47749-58010 Front Fender Liner Bumper Cover

Parts slightly modified to suit the characteristics of 3D printing

Pobrania
34
Polubienia
6
Ocena
0
P
Printablesfelixfive

18V Tool battery power supply case for XYS3580 DC-DC Converter - Makita - Bosch

Use the .3mf as the .stl does not have the banana plug holes and vents. I remixed it just in the slicer, not knowing that it can't be exported with the negative parts applied. Printed in PLA with default 0.2mm layer setting on Bambulab A1

Pobrania
33
Polubienia
6
Ocena
0
P
Printablesmikeller

Dust Cap for CGA-580 Gas Fitting

Dust cap for CGA-580 high pressure gas fitting commonly used on industrial / medical oxygen tanks. Use a cable tie to fasten the 'tail' of the cover to the gas line so you won't loose it when off. Category: Sport & Outdoors

Pobrania
33
Polubienia
0
Ocena
0
P
PrintablesDed Makar
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
31
Polubienia
11
Ocena
0
P
Printables3D-Craft

Rugged Case for 12× BETAFPV LAVA II 1S 580mAh Batteries

Rugged Case for 12× BETAFPV LAVA II 1S 580mAh Batteries A compact and rugged storage case designed specifically for 12 BETAFPV LAVA II 1S 580mAh LiHV batteries with BT2.0 connectors . The batteries are stored vertically in individual…

Pobrania
31
Polubienia
6
Ocena
0
P

Husqvarna M53S Mower part# 5795806 Compatible Wheel Guard

This is replacement wheel guard plates for the powered gas mowers in the Pro line. These plates fail remarkable often, so a reinforced version is also provided, which is easier to print.

Pobrania
31
Polubienia
3
Ocena
0
P
PrintablesJulian

Herpa L580 Anbaugeräte Schnellwechsler modifiziert

Schnellwechsler mit aufnahme für einen 2x2 Rundmagnet. Aufnahme für Kegelzahnrad Modul 0.3, 16 Zähne (16K3) von Sol-expert. Dazu einfach das angedeutete Loch mit einem geeigneten Bohrer (0,3 oder 0,4mm) inklusive dem Zahnrad und der 1mm…

Pobrania
31
Polubienia
3
Ocena
0
P
PrintablesScouijji

ATTWOOD 5580-03 WAKETOWER REPLACEMENT LIGHT BASE 5580A7

I created this replacement because the base is often unavailable and the kit is pretty expensive. Also with the notch it make installation really easy because you dont have any wire cutting. The slit is pretty small to keep the part…

Pobrania
31
Polubienia
0
Ocena
0
P
Printablessuit

Node 202 / Nitro+ RX 580 Fan Duct

The Node 202 is pretty old but still one of the best flat SFF cases out there, since i repurposed my old Sapphire Nitro+ Radeon RX 580 recently in this case, i needed a custom fan duct most models out there did not fit or were plain…

Pobrania
31
Polubienia
9
Ocena
0
P
Printablesofekun

Lewmar 1580279 hatch thingy

Designed and Printed for my friend's boat. Hopefully it works out! **Update** Functional! Saved 85 Eur

Pobrania
29
Polubienia
6
Ocena
0
P
Printablesthall72

Lego Compatible (58090.dat) Tire 14/ 54 x 15 VR

This model is compatible with the lego system.

Pobrania
29
Polubienia
10
Ocena
0
P
Printablesthenicnet

Travel Case for Minisforum UM560/UM580

I designed this to be able to throw this mini-pc into my luggage and take it with me wherever I go. The interior prints are made with a TPU as padding. The exterior is made from PETG or something with strong impact resistance. This will…

Pobrania
28
Polubienia
4
Ocena
0

TWSBI 580 ALR grip section for Jowo #5 nib housing

The Jowo #5 nib section fits the TWSBI 580 ALR body, but the grip section fitting is too narrow to accommodate it. This is a replacement for the entire grip. It seals nicely against the original cap insert. Tested with PLA and PET-G (I…

Pobrania
28
Polubienia
7
Ocena
0
P
PrintablesEvoh

Riser cable bracket for Sliger SM580/SM570

The Linkup PCIE 5.0 riser cable is not compatible with the original bracket that comes with the Sliger SM580/SM570. The mounting holes do not line up. I decided to design my own bracket that will fit the Linkup riser cable. The holes to…

Pobrania
25
Polubienia
1
Ocena
0
P
Printablesdavidsen

Tamiya Astute 58080 spare parts C2 C3

required some spare parts for the Tamiya Astute 58080... so I made a 3D Model. Got them professionally printed later but they also worked made with my Prusa Mini. There is one file close to the original geometry + one file with some…

Pobrania
25
Polubienia
3
Ocena
0
P
PrintablesMax

LG dishwasher door string roller 4580ED3001A

The door spring on our dishwasher snapped which then broke the plastic roller. I was able to source a replacement spring, however unfortunately, the roller for a door spring has been discontinued with no replacement (part number:…

Pobrania
22
Polubienia
3
Ocena
0
P
PrintablesXAPA3

Bumper plug 5802242097

Make this bumper plug, for Iveco Bumper plug 5802242097

Pobrania
22
Polubienia
3
Ocena
0
P
PrintablesDani Projects

Realacc RX5808 Pro diversity FatShark doors

Print in PETG with a new flange to reduce the entry of light Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20 Filament: Amazon Basic PETG Transparent Blue Category: R/C…

Pobrania
22
Polubienia
4
Ocena
0
P
Printableshgross

EPSON ES-580W Power Supply Mount (EU) compatible with IKEA Pax hole pattern

Designed to mount the EPSON ES-580W power supply (EU-model) within an IKEA Pax cabinet .

Pobrania
21
Polubienia
0
Ocena
0
P

CUSTOMIZABLE MIXING PLATE RENFERT RAINBOW NO. 10580000

https://cults3d.com/en/3d-model/various/customizable-mixing-plate-renfert-rainbow-no-10580000-sovereignnations Prototyp for customizing your own Case, add your Name on top or imprint different desings on it....go Wild!!! Print Settings…

Pobrania
21
Polubienia
1
Ocena
2
P
PrintablesSlegnor

Meade LX200 07580 Autostar Holder Jaws

If you find my designs useful, please consider sending a tip The original jaws broke on my Meade LX200GPS's autostar holder long ago (Meade part no 07580), and were since lost. I found a half of one of the original jaws when clearing out…

Pobrania
20
Polubienia
2
Ocena
0
P
PrintablesSondre Hetland

Flywing H1 GPS Mount - Align TB60 / SAB RAW 580

Use double sided tape to stick the FLYWING H1 GPS Unit to the top of the bracket. Two cable ties are inserted into the two holes securing the bracket to the tail boom. As an alternative to the double sided tape screw holes are provided…

Pobrania
20
Polubienia
1
Ocena
0
P
PrintablesRenegat-3

Quanum HB5808 Fatshark Dominator Doors (Trinity compatible)

Remixed from LaForge V2 Fatshark Doors by musicsurf, to fit the Quanum hb5808 diversity. Make sure to check the pictures for printing orientation and support structure. The snapping hooks are modified, as the original design would not fit…

Pobrania
19
Polubienia
0
Ocena
0
P
Printablesctheroux

BBT580 De-soldering Iron Box

This is a box to store BBT580 De-soldering Iron Box. Some glue is required to install the cover lock. Support material is not required. An infill of 20% is recommended. This object's main web page is:…

Pobrania
18
Polubienia
1
Ocena
0
P
PrintablesRandomGenius

Craftsman z5800 Blade Height Handle

I wanted a new handle for the blade height adjuster of my new Craftsman mower. It has a 16 mm diameter / 100 mm depth hole down the center. The logos were printed in 2 colors with Cura's "Pause Print" function, then glued to the handle…

Pobrania
18
Polubienia
2
Ocena
0
P
PrintablesHector Romero

Aorus RX 580 Dual 80mm Fan Shroud

Fan shroud for Gigabyte Aorus RX 580 for 2 80mm fans.

Pobrania
17
Polubienia
1
Ocena
0
P
Printablestruglodite

RX5808 Pro Diversity (custom pcb tripod mount enclosure)

I designed this enclosure for a RX5808 Pro Diversity custom PCB, oled screen, LM2596 buck regulator, and LM2940 ldo. The enclosure includes a T-nut insert for mounting to tripods. More info on the RX5808 Pro Diversity project and code for…

Pobrania
17
Polubienia
0
Ocena
0
P
Printablestgr

BIG Forklift Spare Part Securing Washer J3012-08 E-56580-020

Spare part for BIG Linde Forklift for Kids (Kinderstapler im Linde-Look) http://www.big.de/de/produkte/fahrzeuge/traktoren/linde-forklift-800056580/ Made this for a collegues son. Be careful when testing, it fits tight and is not easy to…

Pobrania
17
Polubienia
2
Ocena
0
P
Printablesbampi2k

Realacc RX5808 Pro Plus Cover for Fatshark

This is an improved bay door for the realacc Rx5808 pro plus sold at Banggood.com. It is inspired from the great work done by @DonBowlissimo. Some minor changes for the module to fit better and fit snugly in the RX bay. Also the cut out…

Pobrania
16
Polubienia
0
Ocena
0
P
PrintablesThump2010

Realacc RX5808 Pro Plus OSD Receiver Cover for Eachine Ev200D

I picked up a Realacc RX5808 Pro Plus OSD Receiver and needed a cover for my Eachine Ev200D goggles so I designed one. I printed it at 0.15mm layer height with support. Infill does not matter. The receiver will be a real tight fit if you…

Pobrania
16
Polubienia
0
Ocena
0
P
Printablessissoux

Housing for fpv RX5808 PRO Video RX

Housing for https://www.drone-fpv-racer.com/module-rx5808-pro-avec-firmware-pirx-20-4442.html or compatible fatshark modules. it's meant to be mounted on quanum google screen back.

Pobrania
16
Polubienia
1
Ocena
0
P
PrintablesKusenklempner

LG AKB783655802 Batteriefachdeckel

Ersatz für den Batteriefachdeckel einer TV Fernbedienung von LG. LG AKB783655802 Gedruckt in PETG

Pobrania
15
Polubienia
1
Ocena
0