244 modeli
This small 5 ml measure can be easily stored in the product container. It is easily printed in PLA or PETG. No support required. Please, like my 3D model and/or download it, a small gesture that will perhaps earn me a few Prusameters.…
Wydruk około 0,47 €–0,58 € nettoWstępna wycena jednego wariantu
Eppendorf tube holder 9x1,5mL print in place. There are some small details next to the feet that make the print look better. Can be easily removed after printing , as if they were supports.
Wydruk około 1,33 €–1,62 € nettoWstępna wycena jednego wariantu
I hate when my samples are getting lost in the sea of ice in my ice box. I got inspired by https://www.thingiverse.com/thing:4732058 and made my own version dedicated to 0,5 ml vials. Design of the plate with numbers and letters is…
Wydruk około 3,13 €–3,82 € nettoWstępna wycena jednego wariantu
This is just an alteration of an existing can dispenser, in order to make it fit the standard 375ml Coca-Cola can in AUS. I also adjusted the size and length of the ramps to give the can enough clearance to fit under the top shelf. Update…
Customized version of https://www.thingiverse.com/thing:682146 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=682146 Instructions Using the following options: spoon_shape = 3 volume_1 = 7.5 unit_volume_1…
Inspired by this design . I didn't like the latching mechanism and it was very hard to print due to some poorly designed internal overhangs, so I decided to redesign it. My design leans more into the spring force of the clip to hold the…
No Supports Needed print at .16mm layer height 10% infill 40mms print speed for best results tight tolerance's (expert print)\ No Selling added handle version (drink wont line up with handle without repositioning) -if you'd like to sell…
I needed this one, the others I found on Thingverse and here, where a bit crap. It has a description on the inside. I made it so it prints without supports. It is also correct up to 1%. (Although I didn't account for the letters) It is 1…
This is just a quick remix of https://www.thingiverse.com/thing:4923778 to hopefully fit 375ml cans. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.20 Infill: 15% Filament: esun PLA+ black…
I am using a fertilizer that needs a mix of 10ml or 15ml of fertilizer and 10 liters of water. I do own a 5-liter watering can. Therefore I made my own version of 5ml and 7.5ml that can be used in this watering can or eventually in any…
This is a collection of travel bottles, with following variations: shampoo (100ml) conditioner (100ml) shower gel (100ml) blank (100ml) blank (75ml) blank (50ml) blank (25ml) You can choose a variation from the different plates in the…
BOM: Printed with ROSA3D Starter PLA Red Whether you need to measure out coffee, protein powder, laundry detergent, or pet food, this set of measuring scoops is the perfect household utility print. The set includes three common and highly…
My space in our lab fridge is a mess – many times i had to move out all the tubes in order to get the only one that I was looking for. They were lying flat, stacking on top of each other. So I designed this tube holder. This helps me to…
Just a simple rack I made for my partner who was needing one as the lab had none! It can hold both 15ml Falcon Tubes as well as EDTA (blood sample) tubes. Using a completely stock Mini+ with Prusament PLA, no infill (meant to be light and…
A holder tray for 17x DoTerra 15ml bottles.
These spoons can be used for measuring small volumes e.g. in the kitchen. Values are: 0.1 ml 0.2 ml 0.5 ml 1.0 ml 2.0 ml 5.0 ml Note: The Spoons are not marked or labeled. It is advised to label them e.g. with a label maker. Notes: I used…
Zur Dosierung von Fischfutter, Dünger, etc.
I wanted a koozie that could fit the slim 355ml cans, but that would then allow them to fit into coolers for thicker cans. I couldn't find anything that quite worked when searching, so I created a new one that fit in testing perfectly…
A lid for the H&S 2024 model 5ml cup to stop paint drying, not sure what they were thinking on this one. Included 2 versions V2 is slightly smaller in diameter by .2mm if you find your fit is too tight. I stuck with V1 as it fits very…
Messlöffel - Measuring Spoon - 45ml
I hate when my samples are getting lost in the sea of ice in my ice box. I modified https://www.thingiverse.com/thing:4732058 for more samples.
Using this model as a template ( https://www.prusaprinters.org/prints/37626-12 ) I created a new, basic model, but with a solid form so that I could choose what kind of infill I wanted. The same effect as the original can be achieved with…
During medical emergencies you have to deal with multiple drugs in syringes. Those may fall out of your pocket if not properly secured. There is a holder for 20 ml, 10 ml, 5 ml and 3 ml syringes.
Nested and keyed Beverage Can Dispenser for standard USA SLIM cans (12 oz. / 355 ml). I split it into two halves so it can be printed on a standard Prusa printer (MK3/MK4). The two halves are keyed together and glue is NOT required for it…
Staircase tube rack. Rows have differing elevation for easy access to each tube 2x6 15mL conical Falcon tubes, 2x5 50mL conical Falcon tubes. Holds a total of 22 tubes. No supports needed. Base is mostly hollowed out to decrease amount of…
Remix of @mhparsons Beverage Can Dispenser to fit Australia 375ml cans. Comes with a common front section and a choice of 5 or 6 can back section.
The original model links to a GitHub repo with a swift package. I adapted the code to generate a 15ml/15g scoop. For convenience, I uploaded it here in case anyone else needs a scoop in that size.
The hole is sized for a standard M3 tread. I personally use it to store gearbox oil near/on my models.
What is it? Built to pair with my " Magnetic Injection Assistant ", this securely holds medication vials inline and at the correct depth while drawing your meds into a syringe. How to use: Add your vial to the Carrier (now is also a good…
A magnetic separation rack for four 1.5ml vials, optimized for a pipetting volume of 200µl and greater. See the remixes for a 12x version with faster separation. This replaces quite well some comically-expensive separation racks that go…
Stop by the tavern before your adventure and enjoy a drink from this 12 oz can cooler. This mug is designed to be efficient to print with multicolor. The bands are horizontal and work well with flushing to infill providing almost zero…
This is a fully functional 5ml syringe with tpu plunger. shells printed in vase mode for speed and plunger only 7 mins. 0 leaks and 100% holds liquids without droplets, pretty amazing… enjoy
This Viking helmet beer can holder combines functional design with legendary Norse warrior aesthetics. Perfectly sized to securely hold standard 585ml beer cans, this 3D printable model transforms your beverage into a vessel worthy of…
Side loading bottle cage for 375 mL cans. Perfect for a mid-ride beer. Need a bottle cage in different size? Check out my parameterised version here! Category: Sport & Outdoors
Travel case that holds a Novo Nordisk FlexPro pen along with sufficient needles and swabs to get through a week of injections with a spare. Print-in-place / no assembly required. Printed with a 0.4mm nozzle. I used 40% infill just to get…
I couldn't find a box for my large 5 ml tips from Diamed, so I made one. “Do not autoclave” is imprinted into both the body and the lid of the box so there is no confusion, this is a heat labile product not suitable for autoclave…
Customized version of http://www.thingiverse.com/thing:114369 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=114369 Instructions Using the following options: thickness = 1 gripDia = 2.5 gripAngle = 20.0…
Made for creatine to clip onto bag but can of course be used for other things. Is a 5ml spoon (5g of creatine)
There are companies out their ROBBING you of 20ml of beer. Bastards! Anyway, this little widget props up a 355ml can to fit properly in your Yeti Colster/stubby holder. It then cleverly flips over, and tucks up into the dome in the bottom…
This is a multi adapter to hold various sizes of glass bottles in your Yeti Colster Insulatied Can Cooler. Simply slip over the top of the glass bottle, it flexes to size and then rotate into place. I found it fits most long neck bottles,…
Space-saving tablespoon fits inside your powder can. Normal tablespoon is too long because of the handle and it usually won't fit inside my chai powder or hot chocolate powder can. It's accurately 15ml.
Rack for up to 10 Eppendorf Tubes or 5ml falcon tubes. For easy one-handed access to the lids. Printed at 0.2 mm layer height, 30% infill, No supports needed. Printed in ABS for ethanol resistance.
Minox 35ML & GL 30mm filter adapter. This adapter replaces my old adapter: https://www.printables.com/model/173716-30-mm-filter_screw-to-push-on-adapter-for-minox-35 IMO, this one has a much better fit and also shows the distance scale.…
Customized version of https://www.thingiverse.com/thing:682146 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=682146 Instructions Using the following options: spoon_shape = 3 volume_1 = 5 unit_volume_1 =…
Made this to organize my ink sample containers and keep them from rolling away. During printing there was some issue with trying to print both models at once with the filament not feeding correctly, but individual they print just fine.
Customized version of http://www.thingiverse.com/thing:114369 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=114369 Instructions Using the following options: gripAngle = 0.0 gripLen = 80.0 thickness = 1…
BOM: Printed with ROSA3D High Speed PLA Gray This is a larger version of my straightforward, functional measuring spoon designed to hold approximately 25ml. It's perfect for slightly larger tasks where a standard teaspoon isn't enough. It…
Made this simple rack for a colleague in the lab who needed a multi-size holder for an experiment. The rack can hold : 1x 50mL falcon tube + 2x 15mL falcon tubes and 6x 1.5mL eppendorf tubes I printed mine in PETG for its better chemical…
The water bottle doesn't fit into a normal car cup holder so I made this.
I printed them with TPU and with FUZZY SKIN to give them a nice grip. → Outside walls, thickness 0.5mm and point distance 0.7mm. For the tank cover I used Snug Supports. You also need to add a Modifier→Cylinder, 32x32x12mm, Position Z 10…
I loved having can lid for my 250mL redbull cans, but I had a few 355's recently and needed a version for those aswell. I present... that version!!! This fits 355mL redbull cans, but might also fit monster or other branded drink cans -…
The supplied scoops for sports nutrition are always short, so I decided to make a longer one. Pre-prepared support easily removable.
A 25ml long-handle measuring spoon for dosing laundry detergent.
I needed a detergent cup to measure 35 ml so made this. The cup can fit about 60ml of liquid but I made a line at 35 so it is easy to see when there is enough detergent. The good thing with this cup is that it doesnt spill. No drops on…
A simple, lightweight ampoule. Ampoule seat height 72mm, diameter 15mm
Important: Print horizontally or the columns will snap when inserting the vial! These are thin protective covers or cases designed for 5mL glass estradiol valerate injection vials manufactured by American Regent and Xiromed. They are…
This simple tray was reversed engineered from existing 15ml test tube trays to support a request from a local testing company in need of more trays. Standard trays and specifically standard size openings for 15ml test tubes did not…
A box for 5ml tips. Do not autoclave.
This is a 15ml centrifuge tube holder I designed for holding nutrient blends for making mead. It also works for anything that will fit in a centrifuge tube. It is designed to be stackable, with a small imprint on the bottom of the rack to…
Customized version of http://www.thingiverse.com/thing:114369 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=114369 Instructions Using the following options: gripAngle = 30.0 gripLen = 60.0 thickness = 2…
Space efficient bottle holders for 32ml and 35ml bottles for Ikea Skadis board
Bottle holder for skadis pegboard. Holds 35ml bottles, like AK Interactive washes. Uses the hooks provided.
A holder tray for 20x DoTerra 5ml bottles.
Bonjour, Voici un bouchon de remplacement pour les tubes à centrifuger coniques de 15ml ( http://www.cloup.fr/type.php?code=Tp2041&scat_id=147 ) Les bouchons d'origine ne sont pas très solides. Le fond du bouchon est conique afin…
Based on my earlier design, the Microcentrifuge Tube Rack , this version is printed in vase mode, reducing by over half the filament (110g to 50g) and time (11.5hr to 4.5hr) required.
I wanted more compact flux dispenser to carry in case with my portable iron, so designed a version for 5ml syringe. Also I didn't like syringe fixation in another dispensers so I designed twist lock functionality (for it to work properly…
In meinem Getränkehalter im Auto fallen die Dosen immer um. Dieser Halter verhindert das.
This design is a series of holders for 15ml centrifuge tubes. The holders can hold 1,2,3,4 or 6 tubes. There are two versions named "compact" and "stable". They differ by the size of the legs: "compact" has smaller legs while "stable" has…
Remix of Mupshots Yeti Lid, resized to suit Australian Coopers Ale 375ml Bottles.
It holds 3 cans, and fits on the Prusa Mini. The overall usefulness for this is questionable, because you could just as easily put 3 cans on your desk without this device. Regardless, I still made it, because its more satisfying to hear…
Fusion files includes a motion link between the plunger and the syringe body. The total travel extends slightly beyond the 5ml mark allowing you to accomodate for slightly excess volumes (if designing a syringe pump apparatus).
-PETG -no supports -any %infill 2023, MN
Modular Syringe Holder for 20ml, 10ml, and 5ml Syringes This modular syringe holder is designed to accommodate 20ml, 10ml, and 5ml syringes, with each module being able to connect to another, either with or without magnets. Each module…
All credit goes to OysteinHuse for his great design. Printed @ 0.2 mm 10 % infill in PLA Customized version of https://www.thingiverse.com/thing:2426065 Printed @ 0.2 mm 10 % infill in PLA Remember to give my thing a "like" , its very…
I bought recently the GEN 80S vape from Vaporesso. Very happy with the shopping but I got two problems: The drip get dirty when you put in the pocket and can leak some liquid so I wanted to create a tap to transport without worries. The…
The laundry detergent scoop with a capacity of 125 ml sets the ultimate standard for efficient and precise dosing. Its generous capacity allows for optimal use of the detergent, while its ergonomic design ensures effortless handling. With…
Material: 380g PLA+ Druckereinstellung: Layerhöhe 0,2 mm / Infill 5 % honeycomb / Support Tree at Parts P3a, P3b Zusätzliches Material / additional material: Spax mit kleinem Senkkopf / chipboard screws with small countersunk head 3,0 x12…
A holder tray for 11x DoTerra 15ml bottles. I sliced the holder of Rokapet to fit my a1 mini printer. with a printbed of 18x18x18cm
Original models: Grogu : https://www.printables.com/model/1747927-grogu-contemplation-statue Icecream holder: https://www.printables.com/model/1226654-pint-holder-for-ben-jerrys-icecream I simply merged and enjoyed. Made for a colleague…
essential oil display, special for 15ML bottles, perfect for placing 5 ml bottles
SHELF for 6 or 9 bottles
The rack is compatible with pipetting robots like Opentrons OT-2. With the Opentrons systems, you can use the standard Falcon 6x15 mL Conical lab-ware definition. Still, lab-ware position calibration is advised. The tubes are kept firmly…
I needed a holder for 6 15 ml falcon tubes. The one i was using was way to big, didn't fit two tubes next to each other with the caps attached and blocked the scales on the tubes. This fixes that and saves me a lot of bench space. This…
Holds a 5ml plastic vial of ink to help prevent accidental tipping.
Works great at PETG (didnt try another one)
3 sizes: 40 well, 60 well, and 80 well. Bottom of each well tapers to a point to help tubes sit upright. All sizes are available with and without handles. Print with 15% infill and supports if printing handles. Dimensions (mm): 80 well:…
This microcentrifuge tube rack offers a secure and organized solution for holding your samples during benchtop experiments or storage. Simply import the file into PrusaSlicer, use a standard PLA or PETG profile, and ensure your print…
A rather ugly remix for 8 x 35ml Vallejo bottles.
Improved magnetic separation rack for 12x 1.5ml vials, optimized for a pipetting volume of 200µl and greater. This version holds 12x vials, with bigger magnets and shorter distance to the vial, making the separation faster. Requires 6x…
Just a rack, snap it in place
Build this little, very stable Scoop.
To organize during calls
A rack to hold multiple 225mL conical centrifuge tubes, such as those made by Corning (Product number 352075). No more struggling to carry them around in beakers to keep them upright. Holes are 62mm in diameter to suit tubes with an outer…
My sis like to use this bottle in school, but the original polypropylene cap is fragile. The result is a thousand of unusable capless not broken bottles in our kitchen. But now i have a 3d printer and some basic CAD skills. She wanted…
I created this to hold my seeds from season to season, using 1.5ml pipettes to hold the seeds and control moisture, while the box blacks out UV exposure. I overwinter several strains / species of plants and find this easy to organize…
