242 modeli
6200 Ball Bearing Very easy to print model with just supports for the balls but barely require's 1g of them. Grid supports works the best Sizeable but this is minium size for best use.
Wydruk około 0,25 €–0,30 € nettoWstępna wycena jednego wariantu
Mopar 55155620AB, Jeep WJ Grand Cherokee 1999-2004 Trunk lid "V8" Emblem for 4.7l models Original designer: DaimlerChrysler AG, Stuttgart / DaimlerChrysler Corporation, Auburn Hills, MI. I disallow commercial use of this model. This item…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Retrofit of window regulator 6205-25-016821P, used for WV / Audi. Printed mine in PTEG with supports, although the supports can be tricky to remove inside the small gap. Clips easily onto frame and was easy to mount correct. Included the…
Wydruk około 0,70 €–0,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
6200 Ball Bearing with HEART! Very easy to print model with just supports for the balls but barely require's 1g of them. Grid supports works the best Sizeable but this is minium size for best use.
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
Try the new, EXTRA printable version of this model! - https://www.printables.com/model/1289272-extra-printable-print-in-place-6200-ball-bearing - Improved in just about every way and highly recommended over this one! I found myself in…
UPDATED: Slightly larger tolerance (0.1mm diameter for the bearing balls). Choose random seams if you printer is not well-calibrated. I recently needed a slimmer ball bearing for a spinner project, so I did my own take on ball bearings to…
Thanks to rosch8 for the really great original wind turbine. After the original wind turbine had been running without any problems for some time, I wanted to make it bigger. Increased the hub, rotor blade and spinner to 150% and changed…
This is a remix of dhiltonp's battery holder that fits CR2450 and CR1620 batteries
Alternative base for DeWalt DCW600 and D26200 milling machines. I made this base so that I wouldn't have to screw the original base onto the milling table every time I wanted to use the milling machine on the table. Cutting depth…
SKF 6200 series ball bearings archive
Once upon a time I found myself in need of a 6200 series bearing but only had a bunch of 608s on hand, so I thought I'd print one up and see if it worked - it did! But it wasn't the simplest or most reliable thing to print, it required…
I've used 6201-2RS bearings for a lot of projects recently, and wanted to make a better 3D model to design around in Fusion360. This is the current result, it's not 100% accurate when it comes to the bearings internal geometry, but it was…
A simple tool to to help re-spool 120 film onto 620 spools for vintage and antique cameras. Prints all at once, just attach the top strap using a couple M3 screws. Printed in Matterhackers build series PLA at 220c, .3mm layer height and…
I printed in PLA .20mm 60% infill on a Prusa Mini. I got the measurements from using digital calipers on the original part, modeling with SketchUp. The most noticeable difference from the original is that the edges aren't as smooth – I…
Wall bracket for mounting a HP Thin Client. It fits my T620, but I guess it fits more models. See drawing for mounting measurements. Use the screws from the original stand. You can print without support @ 15% infill.
compatible with: only for Sensus 620 Watermeter only for ESP32 CAM with integrated Micro USB features: 360° rotatable top part (easy adjustments) ESP32 Cam can slide on top part (easy adjustments) use a sheet of paper on the LED slot to…
Junction box mount for v1 TP-Link EAP 610. It should work for the 620, 660, 670 or any other of the EAP models with the same mounting system. The included drywall mount for v1 EAP 610 didn't work for a single gang ceiling junction box the…
replacement lego axel with stopper
This allows you to use non-proprietary batteries in your Hyper Go 1620X series RC car without resorting to a Velcro strap. It also retains compatibility with the stock proprietary batteries. It will accommodate batteries up to 35mm deep…
Brückenpfeier für Märklin 74613 74618 74620 74623 74636 Die Abdeckungen benötigen Support! Alles andere kann ohne Support gedruckt werden
This is a vertical stand for APs from TP-Link Omada EAP 6 series version V1 including EAP 670, 660, 650, 620, 610. Usually these APs are required to install on the wall or ceiling and one have to drill holes in the wall. Since I just want…
Model train of the loco Y6200 from SNCF. Needs a motor chassis KATO 11-108. Small parts, a bit difficult to print sometimes. Need to debur carefully the parts before assembly. Original design with Designspark mechanical avail on request.…
It should print without supports in the default orientation. If you would like a contrasting infill color to the DeWalt text, change the filament at the appropriate layer. I added a V2.0 which more closely resembles my other DeWalt tool…
Print the adapter and use the 2 smallest enclosed screws from the HomeWizard watermeter to mount it. You have some room to align it well. I found it the easiest to let some water run so the meter is spinning. Then it's quite easy to align…
needed for this spool rewinder https://www.printables.com/model/750033-donor-spool-holder-with-bearings-modular-design-fo its a Bearing 6200 2RS they work, just make sure to turn on random Z seams and have your first layer and stringing…
This is the exhale Adaptor that's design to fit with all my other filter capsule. It is designed to filter out the air you breath out, just incase if you got sick and this will prevent the virus from spreading. Print instructions Print…
Dimensions of the Pin are adapted so that it can fit easily. Also the walls are thicker than on the original Lego because I printed in PLA so it gives a bit more stability. Layer height: 0,15 mm Brim: also used a brim for stability,…
Update May 10 2022: So it's been a year or so now since I made these. And I have to say, clearly no one printed it. I was reprinting in .10 layer height as well as printing thread into the pull instead of tapping it, just to refresh the…
my family wanted a big Christmas Star. (620 mm) on thingiverse I found a smaller version and revised it or created it from scratch. (unfortunately I don't know the source anymore) After the first stars were ready, a narrower version…
This model is compatible with the lego system.
Simple brackets to hold a Bosch 36v charger on the wall. It is designed to use M4 or M4.5 flat head (countersunk type) screws. Parts are designed to print without support or raft. You may have to rotate the parts individually to sit…
Bracked mirrored. Remix from https://www.thingiverse.com/thing:4943241 Category: Electronics
What is it? Replacement straps for 3M gas mask. Two pieces printed out of flexible filament. I used extrudr TPU medium flex filament. Why make it? Originals broke. Latest revision Designed with FreeCAD 0.19 BOM Strap side with pockets…
MJX 16207 Hyper Go RC Buggy Front Shock Tower Cover Needed Hardware: 2pcs M2.5x12mm screw (12mm would be perfect length, photo shows 20mm screws) 2pcs M2.5 nut
RC10 front arm mounts with M3 screw mounting. Shock tower screws M3x14. Chassis mounting screws M3x12. Stock RC10 hinge pins. PRINTING: No supports needed. Material: PETG or something stronger. No PLA. Layer height: 0.2mm Perimeters: 5+…
For MJX Hyper Go H16H H16E H16P 16207 16208 16209 16210 rc car. Part Numbers: Front swing up 16210 Front swing down 16220 Rear swing up 16240 Rear swing down 16250 Most of the measurements are the same, a bit redesigned to be more beefy,…
Update: Ok so, after a summer of driving, this piece has definitely melted a bit. I assume literally being on top of the valve cover is not helpful. If printing this, you'll either need to make a new one every few months (or more in hot…
I needed a safety cover to be able to keep the face of my x6200 safe while carrying it in my backpack. before it was just slid into the pocket and I was afraid it would mess up the knobs or worse the screen. I decided I wanted a simple…
Battery retention arm model can be found here: https://www.printables.com/model/645510-hyper-go-16207-16208-16209-16210-battery-arm Designed to snuggly fit a 75 * 34 * 26.5mm or 2.95 * 1.34 * 1.04inch battery pack This is the battery…
A remix of GWA's well designed bracket to better fit the Pioneer TS-G1620F-2 6.5" speakers. This bracket is used to fit speakers in the rear of a 3-door JB74 Suzuki Jimny. Includes simple TPU gasket model.
I have an MJX Hyper Go 16207. It is a wonderful cheap RC car and is too fast for its own good when used with the included 3S lipo battery. Fast enough to flip over often and damage the rear spoiler and the wheelie bar. In my case the…
Update August 6, 2022 The internal spool holder has been updated to version 2.2 with slimmer and more balanced spool holder. Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If…
Simple stand for the HP T620 Thin Client. The file is orientataed correctly, don't try to change orientation. There are upsupported overhangs for bolt heads if flipped. It will print just fine without supports in current orientation. This…
This model is compatible with the lego system.
This is made by the R400 Sensus 620 Water meters. There are already 2 mounting recesses on the glass, these are used to place the holder over it and to place the sensor perpendicular to the metal. You can attach the adapter using the push…
I wanted something for my CR batteries, to fit onto a 2x2 grid. For the Bin base, I used the Fusion360 Gridfinity extension: https://apps.autodesk.com/FUSION/en/Detail/HelpDoc?appId=7197558650811789&appLang=en&os=Win64. Supported CR Cell…
Ich habe mir bei Obelink eine zweite Spannstange für die Markise geholt. Beim Original (das weiße Teil rechts auf dem Bild) von Thule war der passende Halter für die Befestigung der Stange auf der Kassettenseite dabei, bei der Stange von…
Watersensor enclosure. Fits on the Sensus 620 watermeter as used in the Netherlands. Includes holder for an ESP8266. This is a remix of the “P1 Monitor watermeter ZTATZ sensor mount” by Sp4wN on Thingyverse. I added the ESP8266 enclosure.…
Custom spoiler for the popular RC Buggy MJX HyperGo 16207 wich also protects the shocks tower Print it with PETG or PCTG, the bracket/mount can be printed with TPU to prevent breakage in the event of a harder collision. Use 7% organic…
A remix of interactive3s design for my Dewalt 8mm palm router (DCW600) and plunge base(D262004).
Custom-designed strengthened front shock tower for MJX Hyper Go 1/16 scale models. This part is a direct replacement for the stock component and is engineered to fit precisely using the original hardware. Printed in solid with 100% infill…
This model was designed specifically for TPU plastic. It molds perfectly to the shape of the body and breaks slowly. Everything is installed in its original place. The cover is slightly larger than the original one, which better protects…
I wrote a guide on how to make it more usable here: https://github.com/Szalacinski/amdv620-to-w6800-flashing-guide If you are in China, you can buy the complete kit from GS Origin here: https://item.taobao.com/item.htm?id=1052125661134…
Designed this VFD KeyPad Holder for the YL620 available on AliExpress. This fits in the same size hole as the original part, but the dimensions have been updated for the keypad. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts:…
UPDATE: I did create a newer, slightly easier to print version of the left side emblem that also uses a rising sun instead of my duck. It's set up to only print a single color at a time. Find it under the ‘Single Color - v3’ folder. I…
Taken from here: https://www.thingiverse.com/thing:5674578 For 16208 and 16209
My Datsun 620 is... weathered. I decided, instead of purchasing some decent used sun visors, to take my one good base and remake it. I initially tried printing with supports on the bottom, but it turned out really horribly. I hate…
92mm Fan adapter for Radeon Pro V620. Version 1. I intend to make improvements. This was created to finish a project, and not intended for production use Holes to mount on to card where bracket would normally be. Shroud should be placed…
A friend had a bit of cardboard taped over the top of his GPS unit to stop the glare from his steeply sloping windscreen. I figured there had to be a better way! This cover slips nicely on top of the TomTom device and all buttons and…
I have a french door style LG refrigerator (specifically model LFXS26973D /01 ), the left hand door has a mechanism that runs the height of the door to keep it closed, the right-hand door, however, only has a small plastic clip at the…
Adapter with alignment bracket for cheap Aliexpres LED headlight to classic Ducati Monster headlight bucket. Uses M4 brass inserts Added .step file for modifcation purposses Category: Vehicles
This is a simple wall mount for the Linksys Velop 6E Pro (model MX6200) nodes. Back of the mount has windows for power and Ethernet cables. The node locks into the base of the shelf and stays in securely. The shelf prints quickly without…
This model is compatible with the lego system.
The older Lego models did not come with any way to pose them. So I created a nice stand to put the Slave 1 upright. Prints simple without any supports and after you can just put the model on.
2024/01/12 - Update. The resin printed part became brittle and unfortunately broke after almost a year of use. Perhaps a ‘thicker’ version or different resin would hold up longer. 2023/01/28 Replacement brackets to hold heater instrument…
On my quest to stop paying for things that can be easily made for my truck, my next stop was to model the inserts that hold the grille to the body, using the holes in the nose and tabs on the sides of the grille. Materials needed:…
You can insert the pliers into the cap with the locking lever deactivated — the cap securely holds the pliers in the closed position. When you take out the pliers, the locking lever is activated by friction. I also designed a double sided…
Half height pcie bracket for NVIDIA Quadro K1200 NVS510 P600 P620 P1000 T600 T1000
A small tool to hold the small Bearing for install in the hot engine case
Print-in-Place Bearing (15x35x11mm) Engineered with tight tolerances to minimize play, it serves as a robust alternative for non-critical mechanical assemblies. Technical Specifications Dimensions: 15mm x 35mm x 11mm (Width). Scalability:…
Multi part dual fan shroud for Radeon Pro v620 cloud GPUs. Designed for 92mm static pressure optimized fan. Currently made for motherboards with 3 slot spacing. Compact design will hinder some airflow, with the trade off of only adding 3…
This is a replacement for the stock part 55620-89103 . It uses the original carriage for the cups and the s shaped bar. I have confirmed the design fits and the cup holder works. This design improves on the locks in the back by using…
Remixed model for 6201 bearins, for wall mount same print but 140% size (all axis)
Simple deflector to redirect exhaled air down to reduce risk of fogging up goggles. Works with 3M 6200 mask (medium), but should probably match the 6000 masks family - the small 6100 and large 6300 too. Print on the flat (front) side, no…
Sk:Predpokladám ze veľa ľuďom čo vlastnia polomasku 6200 od firmy 3M sa stalo, že sa im zlomilo upínanie remienkov. Je to diel, ktorý je pomerne krehký a pri nesprávnej alebo neopatrnej manipulácii môže prísť k jeho poškodeniu. To sa…
Outer measures 64x32mm Bearing outer diameter 32mm Bearing height 9mm Height overall 11mm Inner Diameter (Opening) 21mm Screws M5
One simple way to use 120 film in a 620 camera is to just trim around the edge to make it the same size as a 620 roll. But often there is still one problem remaining, the hole in a 120 spool is too big. This adapter fixes that problem,…
I created this C35 Adapter for my DeWalt D26204 based on the existing Makita RT0700 Adapter by chopping off the lower half and replacing that with my design. The newly added part looks a tiny bit shifted on Cura but is fine when printed.…
Slip on cover designed to protect the Xiegu X6200 face. I carry mine in a case and this works perfectly. I added my callsign to my cover with the text sunk in 1mm. The file here does not contain any branding so you can add your own…
Assembled with 2 bolts 2.5 mm by 20 mm
5.25 Bay Cover
Please note the natural shrinkage of the material and add 1% in the slicer if your filament shrinks a lot after printing. Enjoy! Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.20 Infill:…
Little print usefull for the sewing girlfriend ! with space for sewing foots. Category: Tool Holders & Boxes
Print all the pieces face-down on the print bed and then glue the knob covers to the main unit with super glue gel or your adhesive of choice.
Depending on how you print (in one go or separately, you may need to play with xy expansions
Since I broke the original spoiler bracket, I decided to design and make my own. With the original one the spoiler practically touched the shock tower, which I didn't like, so I designed this one in such a way that the spoiler is moved…
I modeled this inspired from some others work I had seen, in order to keep cables close to the camera and avoid less issues with catching them on humans or devices. A design you'll likely want to tweak to your own use case. Its 90mm…
Drift sleeve for 16207 buggy. Works well. Print with PETG.
Aneng 620 multimeter holder for honeycomb storage wall (maybe aneng 681 and others) it will fit a multimeter with dimensions at bottom 22mm x 75mm
Full height pcie bracket for NVIDIA Quadro K1200 NVS510 P600 P620 P1000 T600 T1000
Cover is printed in one go with two filament changes, use white filament to diffuse LED lights
I made this simple HDD cover for the Dell Latitude D620/D630 notebook because I couldn't find an existing STL for it. No Extra hardware needed Print Settings: Material: Anything works from the cheapest PLA to the most expensive PEEK Print…
A simple battery holder for six or ten CR1620 batteries as requested by @Bamse_2416348. The model requires well tuned support interfaces for a clean print. I had no CR1620 batteries lying around, so on the photo it's filled with 1 euro…
This model spawned from me looking for a weather resistant storage case for both CR1620 and CR2032. After some searching that ended up with nothing I designed a small and fast-to-print adapter for the CR1620 so I could use one of the many…
I designed and printed this large surface area, clip-on, exhale filter holder for my 3M 6200 half face respirator. This allows me to use half a surgical mask to filter the air I breath out of the mask in order to protect others while I'm…
Film spool for 620 film cameras. Printed with Formlabs TOUGH 1500.
My HP T620 has a 4 core cpu GX-415GA, 4 GB RAM and 8 GB SSD. Make shure to get one with its power supply. I am using Open Media Vault V 6 as the operating-system for the NAS. It is based on Debian-Linux and fits on the 8 GB SSD. There is…
I did not render this model, I just resize, soften and simplified it Windows 3D Builder to share the same scale as other objects. The original file is from the collection of asteroid radar detection of the PDS site. The file's names…
Filter replacement for 3M respirator using surgical mask. The filter area is 50mm x 42mm, double the area of original rounded adapter to make breath easier. One surgical mask can be cut into 9 pieces for being used in this adapter. Print…
