Liczymy pasujące modele…
Use any floss at least 6" (150 mm) in length. Floss on the Go! Rip, Wrap, Snap, Floss! How to Wrap: Can be Re-used! 1pc Prints in 7 min. 6pc Print in 1 hr.
A holder for an X6Play smartwatch from Xplora. Printed with Organic support. Have fun!
This is modifed version of the initial vase mode design. Primary goal was to reduce print times and plastic use for PLA disposable printing... This design compared to RC2 uses 3 to 4 times less plastic and is usable... It is much improved…
This is a (by far) the simplest AA storage box designed for rapid printing. it fits 36 AA batteries with ease of access. It's designed for rapid printing (0.6 nozzle) with appropriate wall thickness to match 2 perimeters with the…
EN: This stand allows you to place the Sonoff SNZB-06P presence sensor on flat surfaces like shelves or cupboards without wall mounting. Uses the included magnetic plate for secure hold Slot for easy routing of the USB cable Recommended…
This is a bed leveling test mesh to test bed leveling and z-offset to ensure proper bed adhesion. The 16pt mesh is constructed of 16 20mmx20mmx0.2mm squares in a 4x4 grid with 2x200x0.2 lines connecting each grid element to provide whole…
Bottle holder for the Tershine car care cleaning products. This fits a total of 6 bottles, making it easier to store and transport. The holder also fits in their buckets. NOTE I did not create the original design, I found it online on a…
I've purchased a couple Sonoff SNZB-06P mmwave Zigbee sensors, but I didn't like that the size of the sensor was so large with the magnetic base. So I designed this back cover to make the device much smaller. It is possible to stick it…
This is a bed leveling test mesh to test bed leveling and z-offset to ensure proper bed adhesion. The 36pt mesh is constructed of 36 16.5mmx16.5mmx0.2mm squares in a 6x6 grid with 1.65x280x0.2 lines connecting each grid element to provide…
Tire Valve Cap 36psi for my car. Modified from https://www.thingiverse.com/thing:1513169 by filament_required Modified in FreeCAD. Ender 3 v2, Generic ABS, 0.4mm nozzle, 0.2mm Layer height.
This is one more the next new Mini dispenser for 6 cans 330ml or other brands with the same diameter. (See the other Bigger Model 12 Pieces 250ml: https://www.printables.com/de/model/511721-redbull-dispenser or other Small Model Version…
There was no suitable horizontal surface available close enough for the kid and in range of a socket. But a cupboard would allow easy mounting on the side. The charger mount may also be useful to avoid it from sliding around or falling…
Der Griff des Wassertank meiner Kaffeemaschine brach und keine Ersatzteil war in Sicht. Für mich der Grund endlich in CAD und 3D Printing einzusteigen. Letztendlich konnte ich das Modell nachbauen, ohne das Design, rein funktional und mit…
VGA / RGB to HDMI HD-VC9900 Video Converter Board Case with 6pin DIN & Wemos D1 Mini Wifi Designed to house the Wemos D1 Mini to use with the customer firmware https://github.com/ramapcsx2/gbs-control Cut-outs for all the connectors…
Was working on my miniature paint boot (using our old range hood) and I was in need of a bracket for holding a 6 inch duct… so here it is if someone need this also. Can surely be resize in X and Y axes to fit other size ducting. (Edit:…
I am providing the model for the Motorola G6 Plus and Kosmos 722510 children (Entdecker / Explorer), but the FreeCad File is parameterised and you can easily adapt to your own phone. The biggest advantage is that more than one person can…
6 plus Posi-SPHERE primitive
I needed a mountingplate for the LANTRO JS IDC26P-B adapter ( https://www.amazon.de/gp/product/B0946ZFHB8/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 ), so i designed this one. I used M3x4x5 threaded inserts and M3 screws for it and…
Fiat 126p aka Maluch An iconic Polish car from the communist era. Produced to be a car for the masses in a similar way the VW bug was in "the west." Dubbed Maluch (the little guy / toddler) by the people. It is not a 100% accurate…
A 10-inch rack mount for the TP-Link TL-SG108 | TL-SG108PE | TL-SF1006P | TL-SG608E switches. This mount has been tested on both V3 and V5 hardware revision of those switches, but it should be compatible with other revisions as well. I've…
Hole for battery designed to be 18,4mm spacing is 22mm. Model consists of individual pieces that you can separate and use how many fits you. you could also pattern the same model how ever you like. If you want to make 3S6P like me you…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model in multiple colors produces…
Modular Hydroponic Tower made for 2inch Net Pod this is the best model as of now and its a world of difference with the other one. the fact that you dont need to spend hundreds of hours more to print the net pods, simply use cheap…
This soldering tool is designed for 8mm, 10pin, or 12mm LED strips with 2, 3, 4, 5, or 6 pads. It's so simple, feed your strip in under the bridges, feed through your wire through the holes (you can drill out the holes if your printer…
Remix of container for CR2032 batteries.
A 19-inch, 2-part, modular rack mount for the TP-Link TL-SG108 | TL-SG108PE | TL-SF1006P | TL-SG608E switches. I have included the 3MF file as well. This mount is part of a 19-inch modular rack mount system I designed. You can mix and…
Tool holder for 26 pieces Combination Spanner Set. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 135mm W - 49mm H -…
This is a simple battery holder for a battery pack. 3S = 3 batteries in series giving 12v, 6P = 6 batteries in parallel, increasing the storage capacity. If the battery box could hold more I would've gone with an 8P. I'm converting my 12v…
It's just a mount, which sits on top of the four screw-threads on the backside of the Aoocci C6Pro.
This model is compatible with the lego system.
Mould for cable "aftercare" for Multiplex 6pin connector used in RC models. Print instructions Printed with ASA, dipped in acetone (optional). Layer height 0,2mm. The same mould used for the male and female connector. Be careful with the…
BAHCO brand chisel set holder for your workshop to easily gain acces to all chisels. Fits the 6 pcs chisel set. Printing settings layer height is not critical, I used 0.20 mm Printed on X1 Carbon at 100% speed (normal) no supports needed…
rotated the honeycomb pattern to make it easier to print
Meine Akku-Werkzeuge haben Adapter für den BOSCH AdvancedVac 18V-8 bekommen. Da ich im Keller aber auch einen KÄRCHER WD 6P mit einem Zyklon stehen habe, wollte ich nicht alle Werkzeug-Anschlüsse neu drucken. Deshalb habe ich verschiedene…
Hi. This is a remix of the original model. I hope you will like it. #### Changelog ####: Updated v.2 : different spatula holder (the hotend cleaning tools don't fit!!!!!) Updated v.3 : moved and fixed the unclog hotend cleaning tools…
A stand to prevent the inhaler from tipping over. In order for the front foot of the inhaler to reach all the way to the bottom, use a hair dryer to soften the plastic a bit and shape it exactly when you put the inhaler on. Stojánek pro…
Made a nozzle cap for a 16.9 oz Aquafina water bottle. The cap adheres to the PCF-26P thread standard (can be found here: https://www.bevtech.org/assets/Threadspecs/2072575\_tmp.pdf ). Prints well, as the bottom part of the threads…
Don’t have a resin printer? You may buy the model at N'Tastic Scale Models: https://www.ntastic-scale-models.co.uk/shop/under-licence-range-slanjonok-range/WLZIUUC3AWPRTNDKJOPXNJVZ ---- Vulcan Motors was a smaller British car and truck…
I recommend printing it with 100% infill and 4 walls for security. No supports needed.
Here is a 20s6p 21700 cell holder designed for the Ninebot G30. V1 460mm (L) x 117mm (W) x 23mm (H) V2 460mm (L) x 117mm (W) x 13mm (H) making it an ideal fit between the two weld seams in the frame. It also provides sufficient space on…
I wanted to mount the sensor to the underside of a self, and the included magnetic mount doesn't allow it to rotate close enough to horizontal. So I designed this clip, which has allowances for the top button and the USB-C socket on the…
13S6P - 18650 48V Battery Tray with 20.3mm space. This is a 48V battery for any Ebike. Cell holder with cell stopper.
Case for 6pcs Ksger tips STEP file included
Print with PLA or PETG and infill density at 100%
Dell keyboard leg replacement. I designed this for a KB216P model but I think that can fit another keyboards from this vendor. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.08…
good for 24 x 18650 cells in 6s4p, or 4s6p, or just 24s configs small bump in rings to hold cells securely, print 2 racks for top/bottom of cell pack
Fiat 126p keychain with "126p" inscription Print Settings Printer: Bambu Lab P1S Rafts: No Supports: No Infill: 15 Filament: eSUN PLA Category: Keychains
Simple box with lid. Boxes are stackable and there are files for Lid and Box separately. You can use it to store your lego pieces or other things. You can also used these as big building blocks. Printed with Ender 5 Pro using PLA and…
please follow us on instagram & tag us if you printed it: https://www.instagram.com/3dprintkings Print Settings recommended to do a color change by script at height 3.50mm and use a prime pillar Category: Keychains
Fiat 126p Car silhouette model on a stand! It's perfect as a desk decoration. The model includes a set consisting of a car silhouette and a stand. The Fiat 126p is a small city car produced from 1972 to 2000. This model is an icon of…
Just change color on specific layer in slicer to make it dual color
holder for cells 18650 3s6p or 6s3p for nickel tape in 20 mm increments. Here's the battery case: https://www.printables.com/model/1553522-a-case-for-installing-18650-3s6p-or-6s3p-batteries
I originally made a modified 6 pod section which has integrated mounting tabs but figured a mounting section which attaches to the regular 3 or 6 pod section would be more useful. Uses 4x M5 bolts and nuts to mount.
One of the largest mass-produced cars in this galaxy
Fiat 126P, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better detail.…
Anschlussstücke an einem Zyklon für den Kärcher WD 6P.
🚀 Bring Your Sovol SV06 Series to 2025 Standards! This is a work-in-progress upgrade using the Zero Toolhead – the same one used on the Sovol Zero and SV08 MAX – adapted to fit the SV06 , SV06+ , and SV06 Ace . It’s lighter, cleaner, and…
To be printed with support
Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
Tool holder for 16pcs Socket Set 1/2". We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 150mm W - 96,10mm H - 122mm We design…
Holder Stand for Refillable dye pens for IVAN 15mm dye pens for leathercraft , Holds 6 pc, full size 120mm x 80mm
Modeled in Fusion. Designed to be printed face down. Only difference between left and right files is the text, you can just print two of the same side and it will work so long as you don't mind the text being upside down on one. I didn't…
Presch brand file set holder for your workshop to easily gain acces to all files. Fits the 6 pcs file set. Printing settings layer height is not critical, I used 0.20 mm Printed on X1 Carbon at 100% speed (normal) no supports needed with X1
Rack Mount Ears for TP Link TL-SG1016PE switch Fits 19" rack I used 4x M3 screws with washers to install. Prints without supports, more infill is better.
Dock designed for Xiaomi Mi A2 and stock USB-C cable but should fit others phones. Print on the side. No supports required. Once printed break the support on the hole for the cable adapter. Warning the STL for the cable should rest flat…
A cradle customised for a iPhone 15 including protective cover, that fits a standard car "Brodit"-Mounting Platform.
Copper Nickel sheets https://de.aliexpress.com/item/1005005986261829.html Use 0.2mm/0.4mm Nozzle and PETG for the best result.
Just a quick mod to the 6pod section to mount to a 5 gallon bucket lid using 4x M5 bolts and matching nuts. Printed in petg for better temperature resistance and layer adhesion over pla.
Since the RPC1-12RB-6P(72) is EOL I designed a 3D printed drop-in replacement for the AxxSolder project. Housing The housing can be sources from JLC3DP.com With the following parameters: MJF (NYLON) with PA12-HP Nylon PCB The gerber files…
Tool holder for Screwdriver Set 6pcs. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 130mm W - 79,08mm H - 63,11mm We…
The soap mold can be disassembled to easily remove the locally made soaps after it dries to be further processed. it is used to produce 16 molds simultaneously. Instructions It is easy to print and no supports are needed. The parts should…
Tool holder for 6 pcs chisel set. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 206mm W - 60mm H - 93mm We design all…
I was replacing a Tuya sensor with a Sonoff SNZB-06P. I wanted to mount the sensor in ceiling, using the existing hole made by for the Tuya. This mount both accepts the Sonoff SNZB-06P, and cleanly uses the existing hole for the Tuya. If…
Porta micro SD da viaggio 16SD Dimensioni: 45,24 x 24,50 Riempimento: 15% Consiglio di stampare il tappo 1% più grande in modo da essere sicuri che il filetto agganci per bene.
Ninebot-G30 20s6p Cellholder – Advanced Assembly Files Cellholder Dimensions: Length: 460 mm Width: 117 mm Height: 13 mm Hole Diameter: 21.4 mm Overview This new version of the Ninebot-G30 20s6p cellholder is designed for advanced…
This is a DDU/Dashboard Mount for a Nexus 6P. It will likely not fit anything else, that's why I added also the Fusion file for you to adapt it to other measurements. If you think about using a phone as a Simhub Dashboard, consider the…
Tool holder for TX Screwdriver Set 6pcs. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 130mm W - 79,08mm H - 63,11mm We…
DDD Wall Control hanger set for the Crescent 3/8" Drive Pass-Thru X6 Tool Set CX6PT25 Everything you'll need to build a hanger for this tool set is included here. If you have a standard I3-sized print bed, rotate the 11x piece by 38° in…
Print with a support for the USB hole. Requires a bit of glue to connect the two pieces.
Needed to Mount a US-XG-6POE under a desk. Drafted this up and very happy with it! No supports needed. If printed in a high-temp PETG or ASA you can likely get away with just the front mount. However, adding the rear wouldn't be bad…
Gridfinity Torx Socket bit holder 6pcs for Harbor Freight 6 piece torx set.
Case for ElectroCookie Half Size Breadboard Style PCB (6P+T-CNT) ( Amazon.com: ElectroCookie Prototype Board Breadboard Style PCB Solder Board for DIY Electronic Projects, Compatible for Arduino Projects, Gold-Plated (6 Color Pack + 7…
Remixed this made it 2 parts with adapted mount from @Mauker. Also added a keystone Parts 3x M5 screws 3x M5 hex nuts. Thx @Compman90_234828 @Mauker
Holder Stand for Refillable dye pens for IVAN 10mm dye pens for leathercraft , Holds 6 pc, full size 120mm x 80mm
During a remodel of my soldering area one thing led to another and rather than reinvent the soup plate i designed to remix Bryans DIN rail clip to add on a zigbee control unit in a slim configuration. To improve the usability and save…
A case for installing 18650 3s6p or 6s3p batteries, depending on the connection diagram. The box size is designed for a holder from my collection. The voltage indicator and BMS are optional, I glue them on double-sided tape. Made from…
This is a complete kit to build a high capacity 12V (3S6P lithium ion battery. It includes the cell holder frame, a case, and a lid. It was generated using my battery designer program that you can find right here:…
Outline of a fiat 126p car. It can be used as a decoration for the garage or a key rack.
Note that this model requires supports. print with the diamonds facing down and the holes for the batteries facing up. Once support material is removed there should be adequate space for nickel strips to be welded (in theory)
Print with PLA, ABS, PETG Batteries work as bolts for attaching the two parts, you can reattach them if you have a big enough printer, though support will be needed Personally, I divided it into four parts, thus using 0 support In the two…
This model is a free-hanging X axis camera mount for the Logitech C270 webcam on the SV06 and SV06 plus. It may be compatible with other printers but I have not tested it. You do need one screw bolt or dowel (personally I just used a…
In addition to the set you will also find the custom-made coaster holder! Very easy to print (stl + 3mf). Print it using your favorite colours. Commercial License 🚀 Do you want to sell prints of my models? You can purchase commercial…
Copper Nickel sheets https://de.aliexpress.com/item/1005005986261829.html Use 0.2mm/0.4mm Nozzle and PETG for the best result. For 0.4mm Users use this
Headlights frames for Fiat 126p.
an image of polish fiat 126p with frame set pause on 3rd layer to change colour
Dla polskiej części: Jak w tytule, łatwy model z powiewem starych czasów, model maluszka 126p z widoku bocznego : D
