Wyniki wyszukiwania: alf

Sortowanie

2836 modeli

P
PrintablesMichal K

The Complete Gordon Series - Half-Life 1 + 2 + Alyx + Bonus Drink Coasters

Good morning, and welcome to the Black Mesa Transit System! Do you remember the time Gordon Freeman making his friends in the Half-Life Series ? I'll bet yes! However, we are all getting older, the first Half-Life was published back in…

Wydruk około 0,87 €–1,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
437
Polubienia
115
Ocena
5
P
Printableshorrovac

Alfa Romeo 147 (and other contemporary) passenger airbag cover clips

Print in something that is not brittle, preferably with a brim. There are no supports required as the model features in-model supports itself (between the lowermost plate and the one above). Make sure to enable “detect thin walls” and…

Wydruk około 0,21 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
376
Polubienia
18
Ocena
0
P
Printableserrno

Gandalf the Door Stop

UPDATE V2: adding a leg and “separating” the limbs (by the number of layers) for a better visual impression. Figure settings: 0.12mm layer (structural) 20% infill two colors Door stop settings: 0.12mm layer (structural) 100% infill no…

Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu

Pobrania
269
Polubienia
95
Ocena
4,5
P
PrintablesCelta

IKEA ALFTA/Tesa Power Strips Picture Holder

This is a remix of Livingroom Workbench 's design for an IKEA ALFTA. I made some changes to the model to make it better compatible with Tesa powerstrips, which are a bit smaller than IKEA strips. The model comes in two versions: The…

Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu

Pobrania
203
Polubienia
18
Ocena
5
P
PrintablesJavar

Calf Stretching Wedge

Angle 25°, 75 massage points, non-slip surface, easy grip, tread surface 250x290mm. material PLA, PETG no supports

Wydruk około 47,63 €–58,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
202
Polubienia
43
Ocena
5
P
PrintablesJirka B

Shoehorn half-moon hanger

Simple shoehorn hanger. Two variants - one with hole for screw and second one without it. Recommended print settings Resolution: 0.15 Supports: No

Wydruk około 1,31 €–1,60 € nettoWstępna wycena jednego wariantu

Pobrania
125
Polubienia
11
Ocena
0
P
PrintablesKari

Watercolor 60 half-pan tin palette insert

This tray expands the storage capacity of a Sennelier watercolor tin palette from 48 to 60 half-pans, 30 full-pans, or a combination of both. Dimensions: 104mm X 205 mm X 15mm fits most watercolor 48 half-pans tin palettes (check…

Wydruk około 7,14 €–8,73 € nettoWstępna wycena jednego wariantu

Pobrania
109
Polubienia
30
Ocena
5
P
PrintablesBen

GEN2 Decor - Gridfinity Drawers with half grid (25% more storage) - STANDARD

The Gen2 system (by Jerrari ) combined with Gridfinity is a flexible storage system. Why waste space when you can use it. So I added an extra column Gridfinity Half Grid (by HuMa ) to the empty space. The Gridfinity bins can have a height…

Wydruk około 4,36 €–5,32 € nettoWstępna wycena jednego wariantu

Pobrania
101
Polubienia
32
Ocena
0
P
PrintablesMG

Mini Gandalf

For lovers and fans of the Lord of the Rings trilogy, a miniature of Gandalf. Material - PLA.

Wydruk około 2,55 €–3,12 € nettoWstępna wycena jednego wariantu

Pobrania
94
Polubienia
10
Ocena
0
P
PrintablesToby's Designs

ovalflow the soap dish

with this soap dish every soap stays dry and safe in its position. thanks to the opposing curvatures the water can drain away but the soap always stays in the center.

Wydruk około 4,13 €–5,04 € nettoWstępna wycena jednego wariantu

Pobrania
87
Polubienia
20
Ocena
5
P
Printablesdennis0477

Alfa Romeo 147 Handbremsseilhalter Hinten Links

Da der Original Halter aus Stahlblech abgerostet ist, habe ich diesen Halter entworfen. Der wird ebenfalls, wie der Originale, an dem Hitzeschutzblech befestigt. Ich bin eine zeitlang ohne so einen Halter gefahren, daraufhin schliff die…

Wydruk około 0,94 €–1,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
77
Polubienia
6
Ocena
0
P
PrintablesAdam Kimmerly

KM4CFT CFT1 Transceiver Case - V1, Half Upgrade, and V2

Compatible with the original CFT1 v1, Half Upgrade, and the v2. Use v2 models for Half Upgrade and v2 radio. The v1 case provides a slightly more compact case for the original CFT1 but will not work with the Half Upgrade or v2. The v2…

Wydruk około 2,29 €–2,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
70
Polubienia
11
Ocena
5
P
Printables3DHippo

Halfling Accountant

I would recomend halfing your printspeed if you like to print it in original size. Trust me the model looks way better, if you paint it ;) If you love this design and want to see more fun projects like it, consider joining my club on…

Wydruk około 2,79 €–3,40 € nettoWstępna wycena jednego wariantu

Pobrania
68
Polubienia
11
Ocena
0
P
PrintablesFryedWater

HexaBox half

As i was using the remixed design i found i could not only print 2 since they would constantly fall over and it didn't look nice when i just had them stacked 2 on top of each other. enjoy more customizability without support with support

Wydruk około 2,58 €–3,16 € nettoWstępna wycena jednego wariantu

Pobrania
47
Polubienia
8
Ocena
0
P
PrintablesBodo

2x3 units, half height, 5x2 grid Stackable Insertbox w/ Label holder

Stackable Insertbox 2x3 units in footprint, 1/2 height, 5x2 grid with label holder in each partition two of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link…

Wydruk około 3,97 €–4,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
46
Polubienia
4
Ocena
0
P
PrintablesSTSUL.CZ

tenon and mortise with half groove - čep a dlab s drážkou

Školní pomůcka pro truhlářské a tesařské obory. Model po složení stojí sám. Vhodný pro Odborné a technické kreslení a matematiku. Vhodné tisknout různobarevně. School aid for carpentry and carpentry. The model stands alone after assembly.…

Wydruk około 7,01 €–8,56 € nettoWstępna wycena jednego wariantu

Pobrania
33
Polubienia
4
Ocena
0
P
PrintablesJDPrints

Warrior Gear: Pool Noodle Hand and a Half Sword for Prusa Mini

This is a remix of the Warrior Gear Pool Noodle Hand and a Half sword by Ian Foulds to shrink the cross guard enough so that it'll just barely fit on a Prusa Mini diagonally across the build plate. I cut the crossguard into three parts…

Wydruk około 1,04 €–1,27 € nettoWstępna wycena jednego wariantu

Pobrania
27
Polubienia
8
Ocena
0
P
PrintablesJam

Mighty Calf - 3D Scan

An anonymous donor has been kind enough to share his mighty calf for the sake of 3D scanning. The scan has been performed with Skaner 3D - Revopoint Range. The platform with editable (in prusa slicer) text below make it good statue on…

Wydruk około 10,14 €–12,39 € nettoWstępna wycena jednego wariantu

Pobrania
24
Polubienia
0
Ocena
1
P
PrintablesAinon3Dtisk

Gordon Freeman from Half Life

Hello, I have Gordon Freeman from the game Half Life for you. A very nice character from the game Half Life 1. Fully authentic, like life. Good luck with the printing! I used PLA/PETG as the material. You need to use supports!!! If you…

Wydruk około 3,24 €–3,95 € nettoWstępna wycena jednego wariantu

Pobrania
24
Polubienia
8
Ocena
0
P
PrintablesPhilo_fo

Lens cap for FUJIFILM X-Half Camera (X-HF1)

I printed it using two color metallic PLA filament and the octagram spiral pattern on the top and bottom. You can obtain the printing setup form the gcode (for Prusa XL) below. The result looks quite good, and given the minimal effort…

Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu

Pobrania
19
Polubienia
3
Ocena
0
P
PrintablesSTSUL.CZ

tenon and mortise with half groove - čep a dlab s drážkou

Školní pomůcka pro truhlářské a tesařské obory. Model po složení stojí sám. Vhodný pro Odborné a technické kreslení a matematiku. Vhodné tisknout různobarevně. School aid for carpentry and carpentry. The model stands alone after assembly.…

Wydruk około 4,34 €–5,30 € nettoWstępna wycena jednego wariantu

Pobrania
16
Polubienia
2
Ocena
0
P
Printablesjamesmakin

Table leveller for 21.5mm leg half centimeter height boost

This is quite simple, but I learned how to properly use ShapeBinders in FreeCAD to do it so it doesn't break with adjustment. Unfortunately I have to edit the freecad file to make adjustments so for the time being this is set to 5mm…

Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu

Pobrania
15
Polubienia
1
Ocena
0
P
PrintablesTripleB

Alfi bottle opener

If you got problems opening the Alfi Bottle, this “wrench” is here to help.

Wydruk około 1,02 €–1,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
15
Polubienia
0
Ocena
0
P
PrintablesF Engineering

ISO 7000-1564 volume half full

EN: To indicate that the container is half-full. To identify the half-full reading or position indicator on the display or container. DE: Um anzuzeigen, dass der Behälter halbvoll ist. Zur Identifizierung eines halbvollen Behälters auf…

Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu

Pobrania
6
Polubienia
0
Ocena
0
P
PrintablesMir

Sedici Adventure Helmet Half-Turn Fastner

Reverse-engineered replacement fastener for Sedici-brand adventure-style motorcycle helmets. These helmets are a store-brand of CycleGear retail chain. Fits model FG-601SV, may fit others. Recommend at least PETG to deal with sun…

Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu

Pobrania
3
Polubienia
0
Ocena
0
P
Printables3Demon

Gandalf the Grey Rivendell Staff

This is a digital 3D printable model of Gandalf the Grey's Rivendell Staff from The Lord of the Rings, which he used to defeat the Balrog. 📦 Included Files STL (cut for 200mm printer beds) Assembled OBJ file (for easy scaling) 3MF…

Wydruk około 1,33 €–1,62 € nettoWstępna wycena jednego wariantu

Polubienia
135
Ocena
5
P
PrintablesPeter Farell

Half Skinned Viper head

Half Skinned Viper Head

Wydruk około 16,22 €–19,83 € nettoWstępna wycena jednego wariantu

Polubienia
4
Ocena
0

Gandalf Figure – Lord of the Rings

If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.

Pobrania
18 539
Polubienia
3676
Ocena
4,92
P
Printables3DPrintDemon

Voron 2.4 / Trident Canopy Top Hat - REMIX Split model, half printing time & 5g supports

…Please be sure to hit like & post a make, I'd love to see your prints! EDIT: Finally! STEP file has been added!! Sorry it took so long guys, enjoy!! Add some class to your Voron with this awesome canopy / top hat! If you have a smaller…

Pobrania
14 061
Polubienia
553
Ocena
4,97

Gandalf Bust – Lord of the Rings

If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.

Pobrania
10 688
Polubienia
2278
Ocena
5
P
PrintablesPomeranč

Gandalf pen holder

Gandalf pen holder with high details. Great gift for fans of Lords of the ring series. Can also be used as USB stick holder or other similar things.

Pobrania
4282
Polubienia
718
Ocena
4,75
P
PrintablesOddworks

gandalf the white staff

Gandalf the white staff from lord of the rings! the staff is 1;1 scale and stands over 1.5 meters tall! wanna see what is I'm working on next? or if you guys wanna vote on what I'm gonna make next? keep an eye out on my social media :D…

Pobrania
3696
Polubienia
826
Ocena
4,87
P
PrintablesHuMa

Gridfinity Ultra Light Bins - Plain Half Grid Edition

Gridfinity Ultra Light Bin Generator Online Check out the Gridfinity Ultra-Light Bin System. With so much to print in the Gridfinity universe, this system helps you save time, filament and money, allowing you to print even more Gridfinity…

Pobrania
3692
Polubienia
916
Ocena
4,83
P
PrintablesWekster

Mini Gandalf

single and multimaterial

Pobrania
3295
Polubienia
783
Ocena
4,83

Balrog vs Gandalf Diorama (Pre-Supported)

Some info about the whole build. In the diorama folder i give the base and the bridge part, and also Balrog and Gandalf scaled to fit on the bridge. That means that Gandalf needs to be printed small for this diorama to work and best way…

Pobrania
3198
Polubienia
867
Ocena
5
P
PrintablesPRINTSY

Half moon planter

Half Moon Planter A half moon shaped planter for indoor plants and succulents. The planter has draining holes and the plate to hold the excess water. For color change, you can change filament at height 10 mm. Easier print which require no…

Pobrania
3143
Polubienia
1138
Ocena
4,85
P
PrintablesBlueberry Thor

LOTR Doors of Durin w Gandalf Wall Art Decor

Lord of the Rings "Doors of Durin with Gandalf" 2D silhouette wall art decor

Pobrania
3065
Polubienia
975
Ocena
4,97
P
PrintablesOlle3D
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
2937
Polubienia
640
Ocena
4,86
P
PrintablesTim O'Brien

sure.t mag- nerf half dart/talon magazine

Talon/half-length nerf magazine designed to be vertically printed in record time. Faster to print, more modular design, more compatibility, more customizability! Print this with 1 wall with a good PLA+ filament and it'll be a strong,…

Pobrania
2343
Polubienia
320
Ocena
4,9
P
PrintablesSillybutts

Spigot SCAR (Silly Scar) (Half Dart and MegaXL)

MegaXL Spigot SCAR The MegaXL Spigot SCAR (or Silly Scar) is a SCAR attachment for 16mm OD aluminum Nerf hobby barrels that stabilizes darts, is easy to attach and detach, is fully air-sealed, and it allows you to fire MegaXL darts off…

Pobrania
2258
Polubienia
218
Ocena
4,83
P
PrintablesNick__Furry

bottom and spring for sure.t mag- nerf half dart/talon magazine

the spring is recomended to print on PETG, mag bott 2 is of a tighter fit, on my print it just snapped right in without any glue needed

Pobrania
2185
Polubienia
235
Ocena
4,86
P
PrintablesTeirale

Bard - Female - halfling

All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…

Pobrania
2180
Polubienia
193
Ocena
4,82
P
PrintablesJoe Malovich

Gridfinity Half Boxes up to 6 grids long and 6u high

For storing and organizing/reorganizing very small hardware, example m2 thru m6 nuts screws washers from sets. Great if you are constantly adding new sizes and types because the double or 5x boxes are a hassle to reorganize if you add one…

Pobrania
1931
Polubienia
336
Ocena
5
P
PrintablesCNC Kitchen
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
1911
Polubienia
959
Ocena
4,96
P
PrintablesMZ4250

Half Dragons

Half dragons! Print them with a ton of supports and a raft. Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here:…

Pobrania
1826
Polubienia
153
Ocena
5

3-Way Elbow, 1/2 Inch PVC Pipe Fitting Series #HalfInchPVCFittings - UPDATED 2015-02-02

Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here is a 3-Way Elbow designed to…

Pobrania
1785
Polubienia
283
Ocena
5
P
PrintablesPau

half Skull Mask

Máscara de media calavera / Half Skull Mask

Pobrania
1743
Polubienia
377
Ocena
4,75
P
PrintablesHuMa

Gridfinity Base with Clip - Half Grid Spacers

I had some spacing next to the gridfinity base plate inside my drawer, so I remixed the incredible Gridfinity base grid with snap connections by Neel and created some spacers. In this version, there is a half grid before the spacer. Maybe…

Pobrania
1678
Polubienia
307
Ocena
5
P
PrintablesEqubuxu

Reinforced Economical Gridfinity Bins - No vase mode (w/ half grid)

Printing I printed the bins with both 0.4 mm and 0.6 mm nozzles, both work fine. There are all variations of the bins from 1x1x1 to 7x7x10, in regular- and half-grid variations (although most are obviously untested). Recommended settings…

Pobrania
1675
Polubienia
303
Ocena
4,96
P
PrintablesMZ4250

Half Dragons

Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…

Pobrania
1650
Polubienia
217
Ocena
5
P
PrintablesKptnAutismus

Super Drum 70 | talon compatible 70 round nerf half-dart drum

NOT TO BE SOLD BY FRONTLINE FOAM OR BLASTERGUYS POTATOFEEDERNERF IS ALLOWED TO SELL OFF REMAINING STOCK UPDATE 29.08.25: added a 55mm neck option UPDATE 09.08.25: updated the .3mf with the newest parts UPDATE 31.07.25: Modified the necks…

Pobrania
1604
Polubienia
407
Ocena
4,68
P
Printableszimo

608 PiP Half Cage Roller Bearing

Introduction: This 608 roller bearing features a half cage print-in-place design optimized for 3D printing. The rollers have a dynamically changing cross-section, allowing both radial and axial load capabilities. Its unique half-cage…

Pobrania
1567
Polubienia
387
Ocena
4,78
P
PrintablesGFS

Seat belt - deactiv alarm. Alfa Romeo, Audi, BMW, Citroen, Cupra, Dacia, Ferrari, FIAT, Jaguar, Land Rover, Mazda, Mercedes, MG, Mini, Opel, Peugeot, Porsche, Range Rover, Renault, Seat, Skoda, Toyota, Volvo, VW.

Decorated with a logo seat belt clip. I recommend using it to deactivate the weight sensor. When carrying luggage on the seat or for decoration. Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm.…

Pobrania
1463
Polubienia
121
Ocena
4,83
P
Printableshalfbit

Half-height beer crate for CR2032 coin cell batteries

A half height beer crate to store 14x2 (28 total) CR2032 (or thinner) coin cells. Fully compatible with the original battery beer crate design. The gluable bottom part from the original also fits. Stacking two of these half height crates…

Pobrania
1379
Polubienia
235
Ocena
4,97
P
Printables3DyPrinterGuy

Honeycomb Wall - Half Tile

I needed a 1/2 a tile width to finish the wall I was putting my organizer on, so I decided to remix a full one down to size. I created both edge types to fit in vertical and/or horizontal arrangement. Like the full size tile, all edges…

Pobrania
1363
Polubienia
267
Ocena
4,86
P
PrintablesSASSy Design

Botanical Half Crystal Plant pot and Planter - Vase mode design - Botanical Collection

This is a part of the Botanical Collection available in our Printables Club. A geometrical design inspired by plant ornaments and crystal structures. Very easy to print and looks great in modern interiors! Print information: Recommended…

Pobrania
1236
Polubienia
401
Ocena
5
P
PrintablesChristian

Half Life / Half Life 2

The height of the characters is 14 - 14.5 cm, the other objects are proportional to the characters - sorry for the poor photo quality! Print Settings Notes: You can use the complete figure OR the splitted Files (zip-archiv on Thingiverse)…

Pobrania
1144
Polubienia
151
Ocena
4,78
P
PrintablesPower Jojo

Dummy 13 Mecha Calf

I am trying to build Gundam skin for Dummy 13. This is my 1st version which I have discarded but I am still posting it here for someone who might need it. I discarded it because it needs support and I dont like the results after removing…

Pobrania
1131
Polubienia
331
Ocena
5
P
PrintablesMZ4250

Raging Half Orc Barbarian Collection

Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…

Pobrania
1097
Polubienia
84
Ocena
5

4-Way Tee & 5-Way Tee, 1/2 Inch PVC Pipe Fitting Series #HalfInchPVCFittings UPDATE 2015-07-03

Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here are 4-Way and 5-Way Tees…

Pobrania
1033
Polubienia
219
Ocena
4,67
P
PrintablesJoFlash

Simple bowl (half sphere)

I like the reduced design language of this bowl. Mostly simple geometries like circles are used to build this bowl. Prints without support. Best results with the following params: Matte PLA Fuzzy Skin (0.5mm point distance, 0.1mm fuzzy…

Pobrania
998
Polubienia
42
Ocena
5
P
PrintablesVedicFutura

Sacred Cow with Calf

A classic sculpture of a decorated cow and her calf. This imagery is found across most households in India. To the Hindu, the cow symbolizes all other creatures. The cow is a symbol of the Earth, the nourisher, the ever-giving,…

Pobrania
997
Polubienia
46
Ocena
0
P
Printablesdalovering

Fully printable half-width server rack and trays

UPDATES: 20250123 - Added RPi3B Variant but I don't own an rpi3B so check before printing! 20250123 - Added Headrail files since I didn't include them originally Everyone be sure to check out Jeff Geerling's Github and website for more…

Pobrania
968
Polubienia
225
Ocena
4,86
P
PrintablesBrite Minis

Halfling wanderer 28mm (Supportless, FDM friendly)

A travelling member of the Little Folk. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE other minis seen in one of the images are available…

Pobrania
966
Polubienia
91
Ocena
5
P
PrintablesRekcik
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
944
Polubienia
496
Ocena
5
P
PrintablesLVC

Love heart keychain | a half for you, a half for him/her

If you like this model leave a “like” and download it, and also post your make ;) One half of the heart to give to your better half to put on her/his keys or around her/his neck with a necklace and another half for you.…

Pobrania
921
Polubienia
105
Ocena
4,17
P
Printablesaustin

Nerf Dart half length

These nerf dart with break if they are shot with a high power gun at a hard surface. the one with the tapered bottom is for gluing a small ring of foam on to get a better seal with the barrel of the gun to shoot harder and more accurate.

Pobrania
918
Polubienia
55
Ocena
5
P
Printablesana_taylor

Half helper

Inspired by the microjig fitfinder, this tool uses a simple geometric principle to find half the thickness of a piece of wood or other material for setting a saw blade or router bit height. This can be used on materials up to 50mm thick.…

Pobrania
905
Polubienia
197
Ocena
5
P
Printables3dgeprintnl

Cute Highland Cow Calf

Meet the fluffiest lawnmower you’ll ever print. This adorable Highland cow calf sits patiently with a boopable snoot, tiny horns, floppy ears, and a gloriously overgrown fringe that says, “I can’t see you, but I love you.” Perfect as…

Pobrania
892
Polubienia
133
Ocena
4,67
P
PrintablesSasaKaranovic

Half-Life Phone Holder

Very simple Half-Life inspired phone holder. It resembles Half-Life Lambda logo with minor tweaks to make sure your phone can sit comfortably on it. It's a very simple print so you can slice the model yourself just the way you like it. I…

Pobrania
892
Polubienia
175
Ocena
5
P
PrintablesHuMa

Gridfinity Ultra Light Bins - Plain Label Half Grid Edition

Check out the Gridfinity Ultra-Light Bin System. With so much to print in the Gridfinity universe, this system helps you save time, filament and money, allowing you to print even more Gridfinity stuff... It all started with the Gridfinity…

Pobrania
878
Polubienia
351
Ocena
4,67
P
PrintablesRaynus

Half inch Nut and Bolt

This is just a nut and bolt combo. I am including the .sldprt file so it can be modified, or I can modify if someone would want. Just reach out to me.

Pobrania
877
Polubienia
10
Ocena
0
P
PrintablesFlo_vo Design

Brush Holder Halfmoon v3

Simple print to store your brushes. Please activate the tree supports.

Pobrania
852
Polubienia
402
Ocena
0
P
PrintablesBrite Minis

Half-orc female ranger 28mm (Supportless, FDM friendly)

A half-orc lass. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The Half-orc ranger seen in…

Pobrania
848
Polubienia
85
Ocena
5
P
PrintablesRedCowl

Xshot Longshot Half Dart Magwells

To use, print both the left and right halves of either the “Low Profile” or the “Flared" versions. Both of these use the internals from the included X-Shot half length adapter, and both will require some cutting of the adapters…

Pobrania
843
Polubienia
137
Ocena
4,91
P
PrintablesPrintedByMark

Lizalfos from Breath of the Wild

Lizalfos make up a core enemy in the Zelda series and this is one of the best iterations yet. I chose the BoTW version as I really liked the horn better. This stretchy lizard wields a dual pronged Lizal spear. The Base is intended for…

Pobrania
838
Polubienia
142
Ocena
5
P
PrintablesSpock

Nerf Half Dart Cutter Jig - 38mm

This is a remix of a design on thingiverse by user justinsprecher (linked below). I remixed his dart cutting jig to cut 38mm long half darts instead of the original 36mm length his jig used. I really liked his design, but 38mm darts are…

Pobrania
831
Polubienia
148
Ocena
5

Aquarium Decoration - Textured Coconut Half

Custom Coconut shaped cave for fish, shrimp or reptiles. ~15cm X ~15cm X ~9cm. Designed with 2mm walls and meant to be printed with 100% infill and no supports; thin walls in design make the object unsuitable for significant re-sizing…

Pobrania
823
Polubienia
176
Ocena
5
P
PrintablesFerment3d

Watercolor Half Pan

Generic half pan dimensions: 19 x 16 x 9.5mm Winsor and Newton variant dimensions: 19 x 15.75 x 8.6mm Some of the W&N palettes will only accept their own slightly shorter pan sizes so I've included this variant. I have many other…

Pobrania
818
Polubienia
114
Ocena
5

4-Way Elbow, 1/2 Inch PVC Pipe Fitting Series #HalfInchPVCFittings UPDATE 2015-07-03

Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here is a 4-Way Elbow designed to…

Pobrania
805
Polubienia
203
Ocena
5
P
PrintablesExtra Fox

Half-size Breadboard Case

Take your half-size bread board, and jam it into this here thing, and BOOM, it looks all spiffy. That's all this really does. It does feel nice to hold and you could argue the breadboard itself is now more stable, but mostly I was just…

Pobrania
789
Polubienia
51
Ocena
5
P
PrintablesNina Ponce

Letras del Alfabeto

Abecedario, Letras en mayusculas

Pobrania
775
Polubienia
29
Ocena
0
P
PrintablesSkizhoo

M3 Half Track early 1/33

M3 Half-Track early Dimensions : 185mm x 70mm x 65mm Impression en PLA : 0,1mm et 0,2mm Chenilles et galets mobiles Assemblage des pièces fixe avec de la colle (Pattex Spécial Plastique) Chenille composée de 48 maillons relier par fil de…

Pobrania
773
Polubienia
138
Ocena
0
P
PrintablesZemizz

Fachwerkhaus (half-timbered house) 1/87 H0

The building is 73mm x 97mm. It's modeled after a half-timbered house in Stolberg in the Harz region. I glued together the walls first and used the wall support frame to glue the parts at 90°. After painting the walls the half- timbered…

Pobrania
771
Polubienia
104
Ocena
5
P
PrintablesMrExo3D

Strong(er) cable wall hook: Remastered based on generative design - Half size

I needed a smaller one, same thickness but 50% otherwise adjusted hole size to still work with common screws

Pobrania
769
Polubienia
97
Ocena
5
P
PrintablesVedicFutura

Ardhanarishvara - "The Lord Who is Half Woman."

About the Model: STLs of full body and parts with aligning pins included. making of video: https://youtu.be/7cmkdSqncbo About the Original Sculpture: Ardhanarishvara Tiruvenkadu, Thanjavur District. Height 101 cm. Around 11th Century AD.…

Pobrania
767
Polubienia
69
Ocena
5
P
PrintablesJulien Mairy

GandALF the Grey

🧙♂🐽 "GandALF the Grey, cat-devourer and pipe-smoker" Somewhere deep in Middle-earth… or maybe just in Willy Tanner’s garage, a strange wizard appears: ALF dressed as Gandalf, a cosmic fusion between Melmac and the Shire. His grey beard…

Pobrania
761
Polubienia
185
Ocena
4,5
P
PrintablesAstropulse

Elastic Nerf Half Dart Grenade

This nerf half dart grenade activates when you pop the cap, has a timer depending on the different barrels you use, and shoots darts in multiple directions using an internal spinning rod powered by rubber slingshot cord. The time delay is…

Pobrania
757
Polubienia
328
Ocena
4,67
P
PrintablesAhmad

Hello Kitty Half Skeleton

Credit to original creator: https://www.thingiverse.com/thing:2994853

Pobrania
757
Polubienia
273
Ocena
4,92
P
Printablesnilson_fx

Nerf Half Length Dart Cutter [30, 36 & 38mm]

I liked the model “Nerf Half Dart Cutter” by justinsprecher on thingiverse but actually printed the 2 Dart Version b Insurgent79 at the time. I felt like 5 Darts would be the perfect amount for the workflow of cutting darts though with a…

Pobrania
750
Polubienia
70
Ocena
5
P
PrintablesRuihan

FESTOOL Systainer³ case rails (7mm half cut)

7mm thickness work perfect with m6/12mm countersunk screw l cut it into a half so it can be print with noraml 3D printer. It can work ever with PLA and PETG, but the ABS is the best for it.

Pobrania
727
Polubienia
149
Ocena
5
P
PrintablesWOWA IIID

MK4 Z-Cover halfcut - protect the Z-Axis/Screw/Motor

A must-have for the MK4! The trough of the Z-spindle is protected from falling filament pieces, and thanks to the two halves, it's also easy to install. Absolutely essential for every MK4 owner! With this ingenious accessory, the trough…

Pobrania
716
Polubienia
136
Ocena
5
P
PrintablesJamieKorte

Gandalf - The Hobbit 1977

Gandalf from the Rankin and Bass version of the Hobbit.

Pobrania
707
Polubienia
61
Ocena
5
P
PrintablesCaptainAl

10" Rack - Half rack panels for network devices (incl. Unifi/Ubiquiti)

I recently renewed my network setup at home with Unifi devices. That included Unifi Gateway Ultra, Switch Lite 8 POE. At first I stacked them on each other but it would have bad effect like thermal issues and also not good in terms of…

Pobrania
703
Polubienia
67
Ocena
5
P
PrintablesThR33VaN

Tech Deck halfpipe

a cool halfpipe for all your tech deck needs

Pobrania
698
Polubienia
41
Ocena
3,5
P
PrintablesAndré

Star Wars Legion Half (1/2) and 1.5 deployment range tool (3 inch)

Same dimensions as the other movement tools in Legion, same width and height. Made grooves for painting, if that's desired. Also a 1.5 range tool for use with deployment cards, where all of them require 1.5 range measurements.

Pobrania
688
Polubienia
8
Ocena
0
P
PrintablesNick Esselman

Sport balls, whole balls and half balls included

Whole balls and half balls included ALL 25% Scale Recemented. 20% infill, the more the heavier These are just for fun, and not intended do be used as real use balls. i use them to throw upwards laying down if i'm bored and thinking of new…

Pobrania
674
Polubienia
19
Ocena
5
P
Printablesklimoma

Gandalf Lord of the rings- wall art

Gandalf Lord of the rings- wall art, easy to print

Pobrania
669
Polubienia
135
Ocena
5
P
Printablesblide

Magnetic Socket Toolbox Organizer Half Inch 1\2"

Toolbox socket organizer for 1\2 inch sockets. The base is designed to accept a 10x3mm magnet as the base is printed at a .2 layer height. I printed all of these on a Creality CR-10S and placed a M25 pause between layer 16 and 17 in order…

Pobrania
666
Polubienia
191
Ocena
4,33
P
PrintablesJuha Metso

Half Orc Barbarian

Same Half Orc Barbarian in two poses

Pobrania
660
Polubienia
40
Ocena
0