Wyniki wyszukiwania: amiga

Sortowanie

267 modeli

P
PrintablesTantalus

Amiga 500 Mini (A500 Mini) - Miniature Full Size Floppy Disk

No Amiga A500 was complete without a load of floppy disks scattered over the top ready to play. Therefor I designed a full-scale miniature floppy disk for the A500 Mini along with coloured blank disk labels. The Model is split up into two…

Pobrania
368
Polubienia
71
Ocena
5
P
Printablesmondoshawan

Escom Amiga 4000T Door

Parts were printed on my Prusa XL with 0.4mm nozzle using PETG. Note that some of the parts will require some tweaking, as the original Escom molds had poor mechanical tolerances. In particular, the pins used on the side may be too small,…

Pobrania
83
Polubienia
6
Ocena
0
P
PrintablesJason_M

Case for Amiga KMTech mouse joystick switcher

i couldn't find a case for the KMTech Amiga auto mouse and joystick switcher, so i had a go at making my own. this is a fairly basic case that has a pair of light pipes in the lid for the leds that indicate which port is active. there are…

Pobrania
41
Polubienia
5
Ocena
0
P
PrintablesCharly BEGOOD

AMIGA GOTEK enclosure Holder

This version is for 18mm shelf if you want another shelf thickness, you can contact me for posting updated file.

Pobrania
15
Polubienia
2
Ocena
0

RGBtoHDMI adapter housing for Amiga 500

This is a non destructive way of fitting a HDMI output to the Amiga 500. Adding the RGBtoHDMI adapter to the original Amiga 500, gives it the ability to deliver a perfect digital HDMI output. When the small board is fitted inside the…

Pobrania
830
Polubienia
36
Ocena
5
P
PrintablesiZero

Amiga keyboard case

This is a case for internal Amiga keyboard for creating an external keyboard from eg. Amiga 500 keyboard like I did. It it is very similar to Amiga 3000/4000 as I took the measurements from one, but likely not 100% matching as I don't own…

Pobrania
711
Polubienia
51
Ocena
0
P
PrintablesRetromanIE

Amiga 500 Mini - (A500 Mini) Mini Floppy Disk

A mini floppy disk for your A500 Mini. I designed this to be printable and look great with a standard FDM printer using a standard 0.4mm nozzle(Prusa, Ender etc). But I've included a lot of detail(for such a simple model) that will really…

Pobrania
508
Polubienia
26
Ocena
5
P
Printableskenstcyr

Amiga-Style Mini ITX Case

This is a Mini ITX case that I designed in the style of an Amiga 1000. This case features an interchangeable face plate, as well as an interchangeable rear panel. I created this to hold my OtterX, so I've included an OtterX rear plate, as…

Pobrania
305
Polubienia
57
Ocena
5
P
PrintablesTomDD

Amiga 500 (A500) Display Stand

Display stand for the Amiga 500

Pobrania
291
Polubienia
31
Ocena
5
P
PrintablesTomekB

Joystick USB AMIGA

A new version of the joystick for playing your beloved games. You can make it as a USB joystick (Arduino Pro Micro required), or as a version for Amiga computers. I made a little more effort this time and this version of the joystick…

Pobrania
291
Polubienia
44
Ocena
5
P
Printablesdan188

Amiga 500 Gotek bracket

This is a remix of the Amiga 500 Gotek bracket by CrazyBob to work with the new 2022 gotek models that come with a larger oled display and rotary potentiometer. Category: Computer

Pobrania
284
Polubienia
18
Ocena
5
P
PrintablesLars Ivar Haave

Amiga 500 side expansion port cover

This is a replacement expansion port cover for the Amiga 500. Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports: Yes Resolution: 0,1-0,2 mm Infill: 40% Category: Computer

Pobrania
260
Polubienia
7
Ocena
5
P
PrintablesBluedeath

"Realistic feel" Amiga mouse Logitech M185

The original one created by by TomekB is a good work, it has the correct shape but it has not the same feeling of the original tank mouse due to the inverted mechanism and the fact that the button had the tendency to “collapse” toward the…

Pobrania
240
Polubienia
74
Ocena
4,6
P
PrintablesTomekB

Amiga mouse Logitech M185

A case for the Logitech M185 based on the classic mouse from the Amiga. I personally use it with an Amiga emulator. Do not forget to stick the sliders on the bottom. Without this, the mouse will be too low and the sensor may not work…

Pobrania
238
Polubienia
46
Ocena
5
P
PrintablesTomDD

Amiga 1200 (A1200) Display Stand

Display Stand for the Commodore Amiga 1200 Two versions one puts the Amiga in a more vertical position

Pobrania
223
Polubienia
25
Ocena
5
P
Printablesscarullo89

External Gotek Mini Case for Amiga

A case for the Gotek drive with knob decorated in Amiga style. I designed it for my own which contains the knob and OLED display, but I'm including the f3d file for editing.

Pobrania
214
Polubienia
18
Ocena
4

Dual HDMI housing for Amiga 500

This is a remake of my original single HDMI version. Look here for that design, and more detailed assembly. https://www.prusaprinters.org/prints/63688-rgbtohdmi-adapter-housing-for-amiga-500

Pobrania
207
Polubienia
10
Ocena
0
P
PrintablesShred

Amiga 4000 SFX Adapter

SFX form factor power supplies are a good replacement for the original Amiga 4000 Desktop PSU, because they fit well into the same space. This printable is a frame that fills out the empty space below the PSU, gives room for ventilation,…

Pobrania
186
Polubienia
6
Ocena
0
P
PrintablesKmanSweden

Eject button for Amiga 500 Floppy

The button I could find on the internet for the FB-354 (not FZ-354) was supposed to be glued in place according to an ebay ad I found for it.. Not good enough.. Not good enough at all.. Totally reworked the model but let's call this a…

Pobrania
183
Polubienia
11
Ocena
5
P
Printablesaeberbach

Floppy eject button for Amiga Chinon floppy drives

A trivial design - but it's pretty annoying if you don't have one of these. Should print just fine in almost any filament. A little dab of hot glue will hold it in place.

Pobrania
168
Polubienia
11
Ocena
5
P
PrintablesLeeF

Amiga / Atari ST Wall Mount

I liked thing:2883629 but felt i wanted something either side to hold the computer up as well as being more rigid with an additional screw hole. More of a redesign than a remix as I started from scratch. Print Settings Printer Brand: TEVO…

Pobrania
166
Polubienia
15
Ocena
0
P
PrintablesRetromanIE

Amiga 500 Mini - (A500 Mini) Display Stand

This is a simple 2 piece stand for the A500 Mini. Print the 2 parts with 100% infill to make sure there's a little bit of weight to them. 0.2mm layer height works well, but pretty much any height should be fine for this. This was printed…

Pobrania
165
Polubienia
18
Ocena
5
P
Printablessobieh

AMIGA 500 Gotek OLED with Encoder

AMIGA 500 enclosure for Gotek FlashFloppy emulator with OLED screen 128x64 0.96" and rotary encoder. It's designed for typical 24.7mm x 27mm OLED screen with holes spacing 20.5mm x 23.0mm. Encoder mounting hole size is 6.9mm. After…

Pobrania
161
Polubienia
13
Ocena
0
P
Printablesaeberbach

DB23 Plug for Amiga Floppy Drive

23-pin connector as used in the Amiga external floppy drives. Two parts make the pin assembly, two parts make the shell, one extra part is to clamp the cable. 2 x 15mm and 2 x 12mm M3 bolts and 4 hex nuts are required. Pins used are…

Pobrania
160
Polubienia
11
Ocena
0
P
PrintablesEetu Harjumaa

Amiga 500 [Commodore]

My first computer ever. I modeled it a long time ago. This model was done with solidworks within 1mm tolerance. However this model is just a volume model without back ports. Easier to print. The original is like the real amiga in parts.…

Pobrania
154
Polubienia
8
Ocena
5
P
Printablesdjos_1475

Amiga 500 Expansion Port Cover

There are quite a few Amiga 500 Expansion Port Cover design out there but most don't fit very well (the port cover is not rectangular). IMO, my design fits even better than the original cover (see pics). I recommend printing these on a…

Pobrania
153
Polubienia
16
Ocena
0
P
PrintablesSiliconix

Amiga 1200 - Amiga 600 - Amiga 500 Display Stand - Siliconix

Modified version of the Amiga 1200 display stand to support the Amiga 600, Amiga 500 and provide a higher support on the back of the Amiga and prevent it from getting stuck on the Amiga keyboard.

Pobrania
144
Polubienia
7
Ocena
5
P
PrintablesGuZZLo

Amiga Clock

I had an idea, why not make an Amiga clock and sell it on Etsy? Well, I showed the clock on Reddit and had very positive feedback. Starting producing some to sell. Less than a month later someone else took my idea and did the exact same…

Pobrania
141
Polubienia
35
Ocena
5
P
PrintablesAJM

Amiga 1200 Raspberry Pi Non-destructive Case Brackets

** Update 2023-05-22 ** I've added a second, alternative version, of the left-hand part of the model to accommodate an internal floppy drive. Note the right-hand model is unchanged. The mounting points for the Pi have moved further into…

Pobrania
138
Polubienia
11
Ocena
5
P

Amiga - "Pregnant" Mouse (3-button)

You can order this through the PCBway Shared Project as well now: https://www.pcbway.com/project/shareproject/Amiga_Pregnant_Mouse_3_button_version_f910c5ea.html Additionally, a variant of the bottom shell was added to support the Board…

Pobrania
135
Polubienia
12
Ocena
5
P
PrintablesGino Latrino

Diskettenbox "Amiga" Style

Infos: Filament: Redline elfenbein PLA Drucker: Ender 6 mit Sonic Pad/Klipper , 0.4 Düse .Glasplatte 40 ° C Am besten Deckel mit dem Amiga Logo nach unten drucken.Ohne Brim.Wandlinien auf 3 stellen. Druckzeit je Teil ca 4:30 Std. Have Fun…

Pobrania
134
Polubienia
15
Ocena
5
P
Printablestoastfr35

Amiga 1200 feet

To increase the clearance and airflow to an accelerator card. Can also be a support for the PCMCIA card that sticks out of the Amiga.

Pobrania
125
Polubienia
9
Ocena
5
P
Printablesdan188

Amiga DB23 video connector

The connector accepts wires with JST XH female connectors. I printed my connector at 0.1 mm layer height. It can be difficult to print it correctly so that it accepts the JST connectors and they lock in place. If you are having trouble,…

Pobrania
125
Polubienia
13
Ocena
5
P
PrintablesAmmar Faridi

Amiga Logo

Commodore Amiga logo, print flat

Pobrania
121
Polubienia
8
Ocena
5

RGBtoHDMI adapter housing for Amiga 600

This is the Amiga 600 version of my RGBtoHDMI adapter Amiga 500 Version. For assembly instruction look at the Amiga 500 version. https://www.printables.com/model/63688-rgbtohdmi-adapter-housing-for-amiga-500

Pobrania
121
Polubienia
6
Ocena
0
P
Printablesquadrupedal

Amiga 1081 / 1084 Monitor Scale Model

Scale model of an Amiga 1081 / 1084 monitor. 1/8, but you can obviously rescale it. This is an accurate model of a 1081, based on real measurements. 1084s only differ visually in the connections and buttons on the back. I plan on making a…

Pobrania
118
Polubienia
17
Ocena
0
P
PrintablesMaximilianum

Amiga 1200 vent trap door

It's a door with hexagonal holes for the Commodore Amiga 1200 expansion slot. It's useful to improve ventilation in machine with expansion board mounted.

Pobrania
117
Polubienia
7
Ocena
0
P
PrintablesTomekB

Amiga 3000 case for Raspberry Pi 5

Inside mounted step-down 5A inverter and microHDMI > HDMI adapter (Ugreen brand). The 30x30 fan is enough to cool the CPU if you are only using it for Amiga emulation. During full load of all cores it is insufficient and you need to…

Pobrania
113
Polubienia
12
Ocena
4
P
PrintablesNoenDex

Amiga 1200 back trap door CF adapter

Modified back trap door of Amiga 1200 accommodating CF card slot. The CF adapter can be secured to the part. Print Settings Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.18 Infill: 15% How I Designed This I didn't like…

Pobrania
113
Polubienia
4
Ocena
5
P
PrintablesNoenDex

Amiga 1200 back trap door

Exact copy of the original back trap door of Amiga 1200. It can be used as replacement of the original part or as template for embedding connectors. Instructions Printed in PLA @ 210 degC, 0.2 mm, no support, printer M3D Micro Category:…

Pobrania
111
Polubienia
5
Ocena
5
P
PrintablesRetro Frog

Neo Dock - Neo Geo Memory Card and Amiga PCMCIA card display and organizer

If you are tired of having your Neo Geo memory cards or Amiga PCMCIA cards just laying around in random spots, then this is the print for you. Has 3 slots in the top to accommodate cards from either platform. I have uploaded 2 version:…

Pobrania
109
Polubienia
6
Ocena
0
P
Printablesquadrupedal

Amiga 1000 Keyboard Scale Model

A keyboard to complete the other parts in my Amiga 1000 series. A bit of a work in progress as I haven't done the legs yet, so you can't angle it up for comfortable typing, but it will slide into the the keyboard garage, which I guess is…

Pobrania
108
Polubienia
6
Ocena
0
P
Printablesaeberbach

Digital Joystick (Amiga, C64, Atari etc)

I had some parts spare so made a housing for it. Joystick is a Sanwa style. The flat round dust cap for the stick fits into a recess in the top housing and is fitted before the stick is mounted. The sleeve and ball are attached from the…

Pobrania
107
Polubienia
18
Ocena
0
P
PrintablesRetromanIE

Amiga CD32 Back Cover

Back cover for the Amiga CD32. Print instructions 0.1mm - 0.2mm works well. 3-5 walls/shells and 100% infill for strong part.

Pobrania
103
Polubienia
1
Ocena
0
P
PrintablesABrugsch

Amiga A600/A1200 rear case clip

The rear clips on the Amiga 600 and 1200's are prone to breaking if you look at them funny, never mind take it apart every week to install a new accelerator, or gotek, memory upgrade etc. This part fits in between the existing clip lugs…

Pobrania
103
Polubienia
5
Ocena
0
P
Printablesfongo2k

Amiga Action Replay 3 Replica - Case

This is a Amiga Action Replay 3 cartridge case that I have designed for use with the replica project by Nicola Avanzi. I tried to stay as close to the original cartridge design as possible, but had to make some concessions to get the…

Pobrania
101
Polubienia
2
Ocena
0
P
PrintablesShred

Amiga 500 HDMI connector holder V2

NOTE: This model does not fit to the GOEX drive r.2023 or later. After adding a RGBtoHDMI converter to my Amiga 500, I had the problem that I had to get the HDMI signal out of the case. There is also a GOEX SD disk drive simulator in my…

Pobrania
99
Polubienia
8
Ocena
0
P
PrintablesRetromanIE

Amiga 1200 Custom Trapdoor remix

I wanted a tighter fit on my own A1200 as when I printed the original part in Formfutura White ABSpro it fit ok, but there was a bit of movement and rattle. Perhaps there is some shrinkage on the ABS that causes this, if printing with PLA…

Pobrania
98
Polubienia
3
Ocena
0
P

Key Cap Stand (C128, Amiga)

I made this Remix in order to have the print fit my smaller size printer (Anet AM8). Cut up into several pieces, I printed it all in 3 batches: Middle as seperate print, Left & Right side combined, and alt as 1 large print (BARELY fitting…

Pobrania
98
Polubienia
16
Ocena
4,5
P
Printablesfurrfu

Amiga 3005 case for Orange Pi 5

A rather niche object, but that's what 3D printing is for: this is a 40% scale Commodore Amiga 3000-inspired case for the Orange Pi 5 or 5B (Plus may not fit, because of the M.2 connector at the bottom). It's oversized for the board…

Pobrania
96
Polubienia
16
Ocena
0
P
PrintablesCharly BEGOOD

AMIGA GOTEK Enclosure

This is my solution for the Gotek External Interface and floppy disk emulator. For the interface module i have made a simple enclosure for protecting the hardware. For the Gotek emulator i have made the Oled screen version with the two…

Pobrania
94
Polubienia
9
Ocena
0
P
Printablesgruby brodacz

Amiga A-1011, CD-1411 front panel replacement.

I have 1411 floppy disk drive without front panel. I have take second one and measured original. Logos are bigger at original because my printer is little inaccurate. Category: Computer

Pobrania
93
Polubienia
12
Ocena
0
P
Printablesquadrupedal

Amiga 1000 Floppy Eject Button

This is an floppy disk eject button for the Amiga 1000 with its original Panasonic / Matsushita drive. It needs to be printed with a slightly flexible resin, e.g. an "ABS-like" one. I believe this fits and works correctly, but my testing…

Pobrania
93
Polubienia
4
Ocena
0
P
Printablesoimel1981

Amiga DB23 Connector / Stecker

Habe den Stecker an meine Bedürfnisse angepasst. Wenn man die JST Stecker etwas aufbiegt halten sie ohne Kleber. Die Löcher sind für M3 Schrauben und Muttern ausgelegt- Have adapted the plug to my needs. If you bend the JST plugs open a…

Pobrania
92
Polubienia
15
Ocena
5
P
PrintablesMaxim7745

Amiga "Pregnant" Mouse (Two & Three Button Variants)

This design is the two and three button versions of the Amiga "pregnant" mouse. I didn't model the cord, but did do the plug. I made it only from pictures I found online, which required a lot of guesswork, so I'd be most grateful if…

Pobrania
90
Polubienia
12
Ocena
0
P
Printablesquadrupedal

Amiga 1000 Scale Model

Scale model of an Amiga 1000. You might want to pair this with my 1081 monitor , keyboard and mouse .

Pobrania
85
Polubienia
10
Ocena
0
P
PrintablesBea Res

Mini Floppy Disk Drive 1011 Amiga

This replica of the Amiga 1011 Floppy Disk Drive is compatible with the Floppydisk Filament Sample and the Storage Box for Floppydisk Filament Sample that I designed. It can hold one floppy disk: this way, you can use it as a reminder for…

Pobrania
85
Polubienia
23
Ocena
0
P
Printablessmartroad

Amiga 1200 40mm Fan Internal Holder

I added a scandoubler to my Amiga 1200 which, as usual, sits over the Lisa (and Alice) chips. After the machine was one for a long-ish period of time, I saw graphical glitching and drop outs. It turned out the Lisa chip was getting a bit…

Pobrania
84
Polubienia
2
Ocena
0

Dual HDMI housing for Amiga 600

This is the Amiga 600 version of my Dual HDMI housing for the Amiga 500 Version. For assembly instruction look at the Amiga 500 version Look here for that design, and more detailed assembly.…

Pobrania
83
Polubienia
0
Ocena
0
P
Printablesquadrupedal

Amiga 1000 Rear Panel

An Amiga 1000 rear panel complete with icons, as accurate as I could make it. In a single piece for you to split as you see fit. The only intentional difference is that I have centered the text with respect to the ports as the original is…

Pobrania
82
Polubienia
8
Ocena
0
P
Printablessmartroad

Amiga PicoPSU Remix

This is a remix of the Amiga PicoPSU Case by Lemaru. The cable I have had no strain-relief on it, so this has a cable clamp built in. I also moved the 12V input to the same side as the switch. There is also a hole for another socket for…

Pobrania
80
Polubienia
10
Ocena
0
P
Printablesdisplayman

Amiga floppy disk 3.5 box

Store and protect up to 12 3.5 floppy disks with this 3 piece case. The front opens up to allow for better access to the diskettes. No screws needed, the different pieces fit perfectly. For the front plate you can choose the one without…

Pobrania
78
Polubienia
9
Ocena
5
P
Printablesaeberbach

Amiga 1200 light pipe LED assembly

I made a ReAmiga 1.5 recently and it is in an A1200.net case. I made this from scratch rather than buy one. The PCB is available at my github repo . When you have added resistors and LEDs and the connecting cable the three light pipes are…

Pobrania
77
Polubienia
7
Ocena
0
P

Amiga 1000 front cover (seperate clips)

Update 4/10/2020 Uploaded new files, cleaned up the mesh and also fixed some minor tolerances to make things print easier. Original Remixed From: https://www.thingiverse.com/thing:2811303 Seperating the clips from the main body, so they…

Pobrania
76
Polubienia
8
Ocena
0
P
Printablesaeberbach

Amiga 1200 ventilated latched trapdoor cover

I printed a couple of Amiga trapdoor designs and found they break easily. This one has a latch that turns and does not require the plastic to flex when being inserted or removed, and I'm still using my first one. The latch and the drive…

Pobrania
76
Polubienia
1
Ocena
5
P
PrintablesTomekB

Amiga mouse Logitech M305

A case for the Logitech M305 based on the classic tank mouse for the Amiga Computers I recommend printing the top cover vertically. Screws are M3 I attach the project file for Design Spark Mechanical v5

Pobrania
73
Polubienia
23
Ocena
0
P
PrintablesShred

Amiga 500 HDMI connector holder

NOTE: This model does not fit to the GOEX drive r.2023 or later. After adding a RGBtoHDMI converter to my Amiga 500, I had the problem that I had to get the HDMI signal out of the case. There is also a GOEX SD disk drive simulator in my…

Pobrania
73
Polubienia
5
Ocena
0
P
Printablesh19x51

Lotharek USB wireless mouse adapter for AMIGA/ATARI STe case

https://lotharek.pl/productdetail.php?id=244 A case for this adapter, scale it in 0.5% increments until there is a pressure fit Category: Computer

Pobrania
71
Polubienia
5
Ocena
0
P
Printablesdjos_1475

Internal Gotek Drive Chassis for Tandy 1000 HX or Amiga 2000

This Gotek drive case is designed specifically for computers which use the larger 1.25” tall 3.5" Floppy Drive form factor. I've designed it to use a 128x64 0.96' OLED and Rotary Encoder with Push-button. You can also add a little speaker…

Pobrania
71
Polubienia
4
Ocena
0
P
PrintablesEetu Harjumaa

Amiga 500 V2 two color ( in 1:3 scale roughly)

This Amiga is based on my other model. https://www.printables.com/model/909817-amiga-500-commodore This one is in two colors The keyboard and the rest. Need same supports as the first one. The model is in 1 to 1 scale. I printed mine as…

Pobrania
71
Polubienia
8
Ocena
0
P
PrintablesKillerDread PRO

AMIGAPI 1000 - Amiga 1000 (3:1) case for your Raspberry Pi

The AMIGAPI 1000 is an (almost) exact 3:1 scale model of an Amiga 1000 for your Raspberry Pi + 2.5" hard drive + SD extension + 30 mm fan (of course you can just as well use it for your Pi only). I think it makes a great case for the RPi…

Pobrania
68
Polubienia
14
Ocena
0
P
PrintablesRui Reis

MiSTer FPGA Multisystem Amiga case

Amiga top case (ONLY) for the MiSTer Multisystem built from scratch to use with the 2022 bottom case. Features: Amiga logo Amiga Style case Commodore Logo Commodore Logo inlay print files Easier to fit than the original 2022 model Fixed…

Pobrania
68
Polubienia
12
Ocena
0
P
Printablessmartroad

Amiga 1200 CF HDD Holder with Supports

Just a quick remix that allows easy printing of the overhang. The supports can be easily pulled out with thin nose pliers. Print instructions Unassociated tags: amiga 1200, amiga 600 Category: Computer

Pobrania
67
Polubienia
2
Ocena
0
P
Printablessmartroad

Open Amiga Sampler Case

This is my case for the Open Amiga Sampler. It is a MMU print with “built in” labels. I have included the SketchUp file for modification.

Pobrania
67
Polubienia
5
Ocena
0
P
Printablesage age

Amiga Gotek floppy 0,96'' Display

This is a Case was made for Gotek Floppydrive with 0,96'' Display and Rotery Encoder

Pobrania
67
Polubienia
8
Ocena
0
P
PrintablesDIY Beyond 3D

AMIGA Tank Mouse with Wheel

AMIGA TANK MOUSE is fully working with Mouse Kit 002, including mouse wheel and 3rd button. https://eu.store.bambulab.com/products/wireless-mouse-components-kit-002

Pobrania
66
Polubienia
17
Ocena
0
P
PrintablesShred

Amiga 500 Raspberry Pi Zero Cover

With LinuxJedi's CPLD version of the RGBtoHDMI converter, and precision sockets and pins as connection to the Raspberry Pi Zero, the solution is flat enough so the shielding can be closed again. This print is a small cover that is just…

Pobrania
66
Polubienia
5
Ocena
0
P
Printablessmartroad

Amiga 5.25" Compact Flash and FlashFloppy Bay

This is a print for mounting a Compact Flash and a FlashFloppy emulator in a 5.25" drive bay. The FlashFloppy has been designed using a 128x32 OLED display rather than the supplied 3-digit LED. Multicolour print with a "Boing Ball" on the…

Pobrania
63
Polubienia
3
Ocena
0
P
PrintablesCharly BEGOOD

Commodore AMIGA mouse holder

Because i have a little desk for my A1200 & A500 & Mac Mini, i did it to save the space. 28/04/2025 : NEW version slightly less wide: 69 mm instead of 73 mm

Pobrania
63
Polubienia
7
Ocena
0
P
PrintablesAJM

Panasonic JU-256 Floppy Drive Button Extension - For Amiga 1200 Case

Introduction This is a simple design to fit over the top of the existing eject button on a Panasonic JU-256 floppy drive to enable it to work as an internal drive on an Amiga 1200 case. This is part of a larger project:…

Pobrania
63
Polubienia
4
Ocena
0
P
Printablesaeberbach

Amiga A1200 and A600 case clip for Goex display

I bought a Goex + OLED display from Centuriontech. Like everything I have received from there it is excellent but the filament used to print the housing for the OLED was not a great match for my case. I have a good opaque white PLA that…

Pobrania
62
Polubienia
4
Ocena
0
P
PrintablesMaxim7745

Amiga 3000 Faceplate Lookalike

These are models of an Amiga 3000 faceplate, power button, and drive cover. Note that they are meant as a starting point for Amiga 3000 themed cases and the like, not as actual direct replacements for the original parts. As such, STEP…

Pobrania
62
Polubienia
3
Ocena
0
P
PrintablesItsVRK

Amiga themed Prof 9000 Joystick

This is an Amiga themed remix of Prof Competition 9000 joystick clone (thing:918504) using the remixed extended base (thing:2526465) as the shaft of the joysticks from eBay/Aliexpress grind on the bottom. Everything else is the same. Same…

Pobrania
62
Polubienia
6
Ocena
0
P
Printablesjanne808

Amiga 1200 Indivision AGA MK3 VGA Trapdoor

Amiga 1200 trapdoor for Indivision AGA MK3 VGA port PCB. Remix from https://www.thingiverse.com/thing:4609489

Pobrania
59
Polubienia
5
Ocena
0
P
PrintablesDIY Beyond 3D

AMIGA Tank Mouse

AMIGA TANK Mouse Kit is a shell that fits Wireless Mouse Components Kit 002 . There are 2 versions included. No logo, and ZX logo ( LOL :) ) Buttons need spring connectors, BLACK on the photo, then just put them in. If it's too loose put…

Pobrania
57
Polubienia
10
Ocena
0
P
Printablesbluescrn

Arcade Joystick for C64/Amiga

Arcade joystick enclosure for Sanwa or compatible stick two 30mm arcade buttons. Intended for C64 and Amiga use, but could be wired for other retro machines too. Recessed mounting space for a 9-pin D connector, so a joystick extension…

Pobrania
55
Polubienia
16
Ocena
5
P
PrintablesRijk

Commodore Amiga SDBox Case

A small case for the Amiga SDBox (Mallet version for big sd-cards) i use transparent 1.75 PETG filament as “optical fiber” for the led-holes. have fun… :) Print Settings Printer: Prusa MK3S+ Rafts: No Supports: Yes Resolution: .2 Infill:…

Pobrania
54
Polubienia
1
Ocena
0
P
PrintablesSchlumpf999

Joystick Gamepad Retro Arcade for PC (USB-C) and C64 / C128 / Amiga Projekt Joyweiler

Hello, this is a housing for the retro joystick project by Joyweiler for variant 5 with strip grid board and display. Many thanks for sharing the joyweiler project on gitlab and for allowing us to add a link to this project:…

Pobrania
54
Polubienia
18
Ocena
0
P
PrintablesAtelier Du Tech

Amiga 1010 Gotek Front

Amiga 1010 External 3.5 disk Drive, Gotek.

Pobrania
54
Polubienia
6
Ocena
0
P
Printablesericgus

Amiga 3000 Gotek V2 USB disk drive emulator base

Sep-14-2017 (Update) Added a "v2" STL version which moves the USB port more centered to the floppy drive opening, widened the original 3 digit LED display cutout and moved it back slightly to now support an OLED display for use with…

Pobrania
54
Polubienia
4
Ocena
0
P
Printablessmartroad

Amiga 1200 Riser Feet

I have a Blizzard PPC/040 accelerator in my Amiga. The 040 gets REALLY HOT(!) when in use and so I added some active cooling to it. That helps it stay cool(er) however it means the heatsink now sticks out the bottom of the Amiga's case.…

Pobrania
52
Polubienia
5
Ocena
0
P
PrintablesTomDD

Amiga 1200 Trapdoor Cover with Cut-out for ACA1221ec Heatsink

Remix of dvoelkel's v4 design on Thingiverse (https://www.thingiverse.com/thing:1887963) to add space for a ACA1221ec heatsink. Printed at 0.3mm layer height in ABS with supports. Used textured steel sheet for nicer surface finish (see…

Pobrania
52
Polubienia
1
Ocena
0
P
PrintablesFSMaker

Case for micro usb adapter mouse usb db9 commodore amiga

Commodore Amiga DB9 to USB Mouse Adapter Shell no supports are needed ! this is a case for this project : https://www.pcbway.com/project/shareproject/Micro_Amiga_mouse_adaptor.html

Pobrania
52
Polubienia
3
Ocena
0
P
Printablesaeberbach

Amiga external power supply

Mean Well produce a lot of decent power supply modules that are not expensive. The PT-65B is a good match for an Amiga, even one with a 68030 and plenty of memory. This case houses the power supply unit. A suitable switch, AC inlet and…

Pobrania
52
Polubienia
7
Ocena
0
P
PrintablesiZero

Amiga laser mouse upgrade hatch replacement

This is a replacement hatch for newer style Amiga mouse's laser upgrade kit. It uses clip mechanism to secure the attachment. I used ASA filament and variable layer height with this print.

Pobrania
51
Polubienia
3
Ocena
0
P
PrintablesAtelier Du Tech

Amiga 500 TrapDoor switch

Amiga 500 Trapdoor 2 switch for 1Mo chip Ram. Mini Interrupteur à Bascule: https://www.amazon.fr/dp/B0BTM3WQXN?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 M3 Vis:…

Pobrania
50
Polubienia
3
Ocena
0
P
PrintablesRetromanIE

Amiga CD32 TF328 CF-IDE Adapter Tidy/Holder

A simple thing to tidy and help secure the CF IDE adapter under the TF328 (if that's where you want to place it). Prints in about 6-12 mins depending on your printer and settings. 0.2mm layer height works well with 100 percent infill.…

Pobrania
50
Polubienia
3
Ocena
0