Wyniki wyszukiwania: ams

Sortowanie

8183 modeli

P
Printablesjan

Cable Repair and Protect for iPhone and Samsung [lightning+usbc]

The charging cable always breaks at the same position, just right under the plug. Don't replace it, Repair it with this easy print! This works for Apple USBC and lightning, as well as for samsung charging cables! No glue or tape is…

Pobrania
16 669
Polubienia
4370
Ocena
4,68
P
PrintablesOtter Mountain

Samsung Galaxy S22 phone case - 3 Styles

Chose one of 3 designs to download for the Samsung Galaxy S22, S22+ and S22 Ultra are incompatible. All 3 cases work with wireless charging, have exposed power and volume buttons, and have a lip to protect the screen. None of the variants…

Pobrania
3770
Polubienia
198
Ocena
4,58
P
Printablesrorys3D

Samsung Galaxy A33 case

A friend wanted his own case for the new Samsung Galaxy A33, so I was happy to model and print it for him. After two iterations it was done. He wanted this "beam" ornament. But you can create your own . In the files you will also find the…

Pobrania
1570
Polubienia
43
Ocena
4,75
P
PrintablesPrintin'Monkey

Samsung Galaxy Watch 4 & Cell Phone Charging Station.

Bedside charging station for your phone, Samsung Galaxy Watch 4. I have a Galaxy S9+ but it should work with most phones. This may work with other chargers also. The Watch charging base is 33.5mm wide x 9mm deep.

Pobrania
1508
Polubienia
222
Ocena
4,67
P
PrintablesMusti91

Samsung Fernbedienung

Eine simple Halterung für meine Fernbedienung vom Samsung Viewfinity s9 5k

Pobrania
274
Polubienia
16
Ocena
5
P
PrintablesMiklos Kiszely

Bambu Lab P1 / X1 / X1C / X1CC Filament Spool Switcher & Winder if you use AMS

Purely mechanically controlled filament winder for Bambu Lab P1, X1, X1C or X1CC 3D Printer. Printed on Bambu Lab X1 CC. Watch the videos first at the bottom, at the end of the description. If there is news about the model, you will find…

Pobrania
118 191
Polubienia
19 105
Ocena
4,68
P
PrintablesGekoPrime

Pastamatic - Filament Spool Winder for Bambu Lab X1C/P1P AMS (level winder with self reversing leadscrew)

I tried another spool winder but found it finicky and delicate. I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable winders Why pick this model: Prints…

Pobrania
73 270
Polubienia
11 289
Ocena
4,85
P
PrintablesJody

Bambu AMS Disconnect Tool

This is a combination tool to help disconnect the PTFE tube and the AMS cable. I had seen some small separate versions, I wanted to make a combined tool that I can hang from my wire shelving unit. There are also holes to hang from a peg.…

Pobrania
68 879
Polubienia
6637
Ocena
4,96
P
PrintablesThomas

Silica Dry Box for Bambu Lab AMS Hydra and Stock Version

This Silica Box is for the AMS Hydra Mod , but it also works perfectly with the standard AMS. It fits perfectly and the volume is larger than in other versions. There are also versions that support a Hygrometer. This is the Hygrometer I…

Pobrania
54 183
Polubienia
6013
Ocena
4,93
P
PrintablesJS-studio

Addams Family Thing

One more Thing from the Addams family Designed for unsupported printing with high detail. Happy HALLOWEEN Print instructions No support needed

Pobrania
48 861
Polubienia
7286
Ocena
4,98
P
PrintablesBlizzard

Cardboard Spool Ring for Bambu Lab AMS (parametric)

The one spool ring to rule them all! Bambu Lab doesn't recommend using filaments with cardboard spools with the AMS, as they can produce dust and block the rollers or the cardboard edges could fray, causing issues. By snapping this model…

Pobrania
27 821
Polubienia
2953
Ocena
4,91
P
PrintablesReckit

Phone Stand (No MMU or AMS Needed)

Added a version with the accent embedded in the model MMU or AMS is needed unless you want to try and do a manual filament change The stand is designed to hold the phone with or without a case. Accents on the side are printed separately…

Pobrania
25 550
Polubienia
3520
Ocena
4,94
P
PrintablesOurAngryBadger

Bambu X1 PTFE Extruder Bracket AMS Error Fix

Do you have the following printer errors when printing with the AMS? Failed to pull out the filament from the extruder Failed to feed the filament into the toolhead Well, give this little mod a try! In my case, I found the most common…

Pobrania
24 047
Polubienia
2872
Ocena
4,75
P
Printableshumebeam

Hydra - Enhanced Bambu Lab AMS

Notice! This is only compatible with the original AMS. Please view my other designs for designs supporting other AMS systems, there are plenty. Update August 5, 2026 Hydra has been updated to version 1.13. Changes: Improved split design,…

Pobrania
19 728
Polubienia
5548
Ocena
4,84
P
Printableseds_3d_shop

Perfect Fit Bambu Lab/Bambulab AMS Feeder Button Cover Protector Saver (Hydra AMS compatible!)

There are several reports that AMS units, that arrived to users from 08.2023 had a slightly changed configuration of the feeding funnel. The AMS Funnel Buttons on the new units are thicker. Please check the thickness of AMS Funnel Buttons…

Pobrania
19 553
Polubienia
2187
Ocena
4,92
P
Printableseds_3d_shop

Eds powerfull magnetic Bambu Lab X1 / P1S (full AMS Hub compatible!) Exhaust Fan Muffler / Fan Silencer without Supports/Bridges!

Bambu Lab X1 Exhaust Fan Muffler / Fan Silencer (Eds Version) My remix of really cool original silencer of OurAngryBadger! THANK YOU for the step files!!! :-) Main changes - really nice (with big bambu lab logo) and easy print version…

Pobrania
19 241
Polubienia
1519
Ocena
4,91
P
PrintablesSTprinting

Bambu Lab AMS Hub PTFE button

Simple button to make removing the PTFE tube from the AMS buffer a little easier. There are 2 versions. One is a permanent install, and the other slips over the tube so it can be removed.

Pobrania
18 857
Polubienia
1370
Ocena
4,87
P
PrintablesRoland Deschain

Desiccant Tray for Bambu Lab AMS

This was a well designed model but I didn't like that it was too tall to use with the stock cover. While I was shortening it I saw room for some improvements so I made the following changes: Reduced overall height just enough to fit the…

Pobrania
18 692
Polubienia
1435
Ocena
4,97
P
PrintablesMikyleee

Bambu Lab AMS Rear Desiccant Refillable Tray

Edit V3: Logo rotated 180° and tiny gap in bottom left and right has been fixed! I didn't want to have to keep buying the correct size sachets from BL as they're expensive and don't last long at all. There's lots of similar versions to…

Pobrania
16 491
Polubienia
2710
Ocena
4,98
P
PrintablesAdam L

Better Seams: An Orca Slicer Guide to Using Scarf Seams

TLDR: This post is quite long and detailed because it involves the findings from hundreds of experiments. If you're just looking to try the best settings, download TestSuite_OrcaSlicerOnly_V6.3MF , make sure to set your own filament…

Pobrania
15 155
Polubienia
2604
Ocena
5
P
PrintablesEldon

Bambu Lab AMS Desiccant Tray

README It has come to my attention that there may be a different model of AMS that this 3D model does not fit. Please check if the tabs are the larger or smaller ones before printing. Thanks Not my design but I found a another user who…

Pobrania
14 962
Polubienia
1629
Ocena
4,69
P
PrintablesEd Johnson

Bambu AMS No-Catch Y-Splitter PC4-M10

Update 2023-11-07: Added a “long slot” version to accommodate some inconsistencies in the length of the PTFE tube sticking out the back of the printer that feeds the hot end. I want to thank users @xenon2008 and @Tvorim3D for leaving a…

Pobrania
14 057
Polubienia
2732
Ocena
4,91
P
PrintablesAdam L

ShortStack: The Tiny Little Bambu AMS loading fix that might save your sanity!

Update(8/6/23) : Added a low-interference version for anyone having problems with collisions with their toolhead cover. This one is harder to print, but it should solve the issue for people where they get rubbing with the support arm.…

Pobrania
13 906
Polubienia
2306
Ocena
4,93
P
Printablesteol0370

Samsung Galaxy Watch 5/5 Pro/6/7/8/Ultra Charging Stand (Galaxy Watch 3/4 support)

Intended to be FDM printed as a single piece with no supports required. Designed for continuous watch bands but should also work with any watch band as long as the band width does not exceed 24mm otherwise the lower strap will interfere…

Pobrania
13 784
Polubienia
1853
Ocena
4,96
P
PrintablesJan Štech

Template For Electrical Diagrams

Miniature template for drawing electrical schematics. See also: Template For Flowchart Diagrams https://www.printables.com/cs/model/792825-french-rulers Template For Logic Diagrams…

Pobrania
13 758
Polubienia
7094
Ocena
4,82
P
Printableseds_3d_shop

v.2.0 and v.2.1 of Perfect Fit Bambu Lab AMS Feeder Button Cover Protector Saver for ALL revisions of feeding funnel

UPDATE from 15.02.2024: Recently there have been increasing reports that the new AMS, which will be delivered to customers after October 2023, have larger feeder-funnels. And there has also been a particularly large number of reports…

Pobrania
13 729
Polubienia
796
Ocena
4,9
P
Printableseds_3d_shop

Slim front side AMS (and Hydra) narrow side corners silica dryer pod/drybox with snap fit lids for Bambu Lab AMS

UPDATE 1.02.2024: Lids with Bambu-Logo handle for small and big AMS dryer pods The perfect-fit funnels for big and small silica buckets I think the silica boxes in AMS are simply brilliant, so the filaments can stay in AMS for a long time…

Pobrania
13 525
Polubienia
751
Ocena
4,96
P
Printableseds_3d_shop

Perfect Fit Bambu Lab/Bambulab AMS Feeder Button Cover Protector Saver (Hydra AMS compatible!) -> for NEW revision of AMS feeding funnel!

Important! This is a remix version of Perfect Fit Bambu Lab/Bambulab AMS Feeder Button Cover Protector for the new revision of AMS feeding funnel . There are several reports that such AMS units arrived to users from 08.2023 . Please check…

Pobrania
12 864
Polubienia
745
Ocena
4,8

Bambu Lab AMS Disconnect Tools

Due to the way the Bambu Lab AMS Buffer is designed, disconnecting the PTFE tube and the control cable can be difficult. The tube coupler's release ring is recessed inside the buffer, and the cable's release clip is between the cable and…

Pobrania
10 666
Polubienia
1140
Ocena
4,89
P
PrintablesDesignCraft

ESUN Bambu Lab AMS Cardboard Spool Adapter Ring

This adapter system wraps the edges of an ESUN 1kg 199x62mm cardboard spool in order to: provide smooth rotation within a Bambu Lab AMS prevent carboard debris from depositing within a Bambu Lab AMS Features: Reusable ESUN nameplate for…

Pobrania
9252
Polubienia
932
Ocena
4,75
P
PrintablesEon3D

Cute Bear - Keychain (3.5 grams)

This cute bear figurine is perfect for a quick print, taking only 25 minutes to complete! Designed with smooth lines and simple shapes, it’s an ideal project for both beginners and seasoned makers. While minimal supports are needed for…

Pobrania
8679
Polubienia
1324
Ocena
4,82
P
PrintablesNeedItMakeIt

Bambu Lab AMS Universal Spool Center Desiccant Holder

To print this, use Vase Mode (Spiral) Change line widths from 0.4 to 0.7, increase by 0.3mm to each width setting Use 6 bottoms, this makes sure that the vase has a good connection to the top or bottom. Use ASA/ABS or PETG if you want…

Pobrania
8585
Polubienia
1089
Ocena
4,73
P
PrintablesJamKo Design

Bambu Lab AMS Cardboard Spool Adapter (New V2! Update)

UPDATE!: I have revised the original Overture Spool Adapter based on feedback and experience after creating my Polymaker Spool Adapter. Version 2 of the spool adapter works just like the original except, I have added the small retention…

Pobrania
8546
Polubienia
697
Ocena
4,96
P
Printablesmarkury

Cute Crab Pen Holder (& Painted for AMS)

The original model needed support in the eye holes in my experience, so I made the eye holes the bare minimum depth. I also have included the multicolor painted file for Bambu Studio in case you want to print it with different colored…

Pobrania
8529
Polubienia
1892
Ocena
4,98
P
PrintablesMaxime

Samsung Galaxy Watch 4 charging stand

Modèle 3D d'un support de charge pour la Samsung Galaxy Watch 4 et 4 Classic. 3D Model of charging station design for Samsung Galaxy Watch 4 and Watch 4 classic Paramètres d'impression / Print Settings Marque / Printer Brand : Artillery…

Pobrania
8490
Polubienia
984
Ocena
4,92
P

Fat Hamster

Here's a chubby little hamster no-support model. A great printer guardian, but watch out for your snacks. Print size at 100% is 60mm/2.4 in. Can be scaled down to 50% *Hamsters pictured are painted with acrylic paints Printed on Ender 3v2…

Pobrania
8160
Polubienia
1766
Ocena
4,96
P
PrintablesCake3d

Bambu Lab Carbon X1C X1 P1S P1P with AMS Top Tool Storage

EDIT- I've recently purchased some P1S machines and this model works fine on them but I plan on updating the model to work better on them and also incorporate different slots than the original, if you have any specific requests for slot…

Pobrania
7939
Polubienia
1949
Ocena
4,9
P
PrintablesFatTony

V2 Vented Remix - Updated Bambu Lab Ultimate P1P P1S X1-C Riser+AMS Stand - Community Build!

Simple remix that adds ledges half way up the riser so the glass will slide in on top of for easy ventilation when printing PLA. Add LED lighting or stick cheap under cabinet lights to the bottom of the AMS for a simple lighting solution.…

Pobrania
7372
Polubienia
1359
Ocena
4,89
P
PrintablesLongracks Labs

Dry Pods with Hydrometer + AMS desicant trays for Bambu Lab AMS

Combined the ams desiccant tray and the Dry Pod with hydrometer models into a single print. A day after setting this up with fresh desiccant beads ( https://www.amazon.com/dp/B013L31PQ0?psc=1&ref=ppx_yo2ov_dt_b_product_details ) the…

Pobrania
7118
Polubienia
585
Ocena
4,96
P
PrintablesSoftFever

Slica box/dry box for Bambulab AMS

Desiccant box for AMS. The slim version support 44mm X 44mm X 13mm hygrometer. ----------- Here is the explanation to address some comments regarding the hole orientation. The reason I chose horizontal orientation, which results in many…

Pobrania
6617
Polubienia
749
Ocena
4,86
P
PrintablesMediaMan3D

Silica - Desiccant Dry Box for Bambu Lab AMS-US Round

This is a remix of SoftFever's middle dry box AND SamH's remix for AMS that works with round hygrometers that are available on Amazon in the US. Use the top from SamH's remix project. Updated 10-20 Added indent to back wall for AMS roller…

Pobrania
6562
Polubienia
1031
Ocena
4,9
P
Printableshumebeam

Hydra - Enhanced Bambu Lab AMS - Silica Dry Boxes / Serial Number Tags

Notice! This version is obsolete. An updated version compatible with both stock and all Hydra versions is available here: https://www.printables.com/model/1633611-high-capacity-ams-silica-dry-box About This is only compatible with Hydra…

Pobrania
6450
Polubienia
823
Ocena
4,96
P
PrintablesIMPROV3D!

IMPROV3D! Adapterspule für Bambu Lab X1 AMS

Kleine Spulen passen nicht ins AMS. Bambu Lab gibt eine geeignete Spulenbreite von 50-68mm und einen Durchmesser von etwa 200mm an. Kleinere Spulen wie etwa die 250g magicPLA von 3DJake können mit dieser Adapterspule und den passenden…

Pobrania
6156
Polubienia
399
Ocena
4,89
P
PrintablesThe Kit Kiln

Stormchunker Kit (No Support, No AMS, No Glue)

****Find all of my exclusive content on my Thangs.com profile **** This chunky Stormtrooper kit is roughly 6.5 inches (17cm) tall once assembled. Shop the filament we used in this model on our Amazon Storefront As with all of our models,…

Pobrania
6021
Polubienia
2113
Ocena
4,91
P
PrintablesSK3D

Ultimate Survival/Emergency Whistle - LESS THAN 5 GRAMS! - V1.8

DESCRIPTION: This is a very compact yet highly useful tool to have wherever you go! Whether it's hiking, camping, swimming, or even sports this whistle is ready for the occasion. READ PRINT INSTRUCTIONS 👇 Please feel free to leave a…

Pobrania
6019
Polubienia
1425
Ocena
4,77
P
Printablesdietrich

BambuLab AMS Dryer pod with indent for AMS fix

Remix of the box to have an indent that makes it slide in place even with installed AMS reinforcement clips. For me no resizing was necessary. AMS reinforcement clips The AMS reinforcement clips were introduced by BambuLab as a quick…

Pobrania
5932
Polubienia
530
Ocena
4,89
P
Printableshumebeam

Python - Ultimate Bambu Lab AMS

Notice! This is only compatible with the original AMS. Please view my other designs for designs supporting other AMS systems, there are plenty. Buy Python I've teamed up with a few different stores around the world offering the printed…

Pobrania
5739
Polubienia
1612
Ocena
4,98
P
PrintablesWorldspawn00

Star Wars Jedi: Fallen Order BD-1 Droid Card Kit for 4 color printing on Bambu X1/X1C or P1P with AMS

Remix designed for use with the Bambu Labs AMS, colors are as accurate as possible to BD-1 in Fallen Order (see reference images) using White, Red, Silver, and Black PLA (PLA+ is recommended for the Body and Silver color, as some of the…

Pobrania
5693
Polubienia
1909
Ocena
5
P
PrintablesBryce

Ultimate DIY Replacement Knob Pack (for Samsung, Smeg, Toyota & More!)

I originally designed a replacement 3D printed knob for a Smeg oven after struggling to find a replacement. I've since added a total of 7 customisable Knob designs and 5 customisable Inserts that can be mixed and matched to create the…

Pobrania
5660
Polubienia
4858
Ocena
4,92
P
PrintablesJS-studio

Fester Addams Bust

Another member of Addams's family, Uncle Fester. Designed for easy, unsupported printing Happy Halloween Print instructions Printing without supports

Pobrania
5643
Polubienia
807
Ocena
4,96
P
PrintablesRemrafs

Funnel for Bambu AMS Dry Box

I designed this funnel to slide on to the dry box using the slots for the lid, to ensure it stays in place while adding Silica gel to the box. The walls are 1.5mm thick, so it prints quite quickly but isn't too delicate. I printed with a…

Pobrania
5567
Polubienia
542
Ocena
4,98
P
Printableshumebeam

Hydra - Enhanced Bambu Lab AMS - PTFE Load Buttons

Notice! This is only compatible with the original AMS. Please view my other designs for designs supporting other AMS systems, there are plenty. Notice, this design is for the older style of AMS feeding funnel that has a slim press button.…

Pobrania
5474
Polubienia
757
Ocena
4,75
P
PrintablesSTprinting

Bambu Lab AMS Dryer pod w/ snap fit lids

I remixed the box to have a snap-fit lid and vertical holes for less bridging. I added a new version that takes inspiration from the Galactic Empire. (I was bored and have not had a chance to test print)

Pobrania
5174
Polubienia
615
Ocena
4,95
P
PrintablesEd Johnson

Y-Splitter for the Bambu Lab X1C AMS

Update 2023-08-01 #2: NEW VERSION! I have created a new and improved “no-catch” y-splitter Check out and download the new version here: Bambu AMS No-Catch Y-Splitter PC4-M10 I want to thank everyone who who downloaded and posted makes and…

Pobrania
5037
Polubienia
600
Ocena
4,81
P
PrintablesCarl D

Radius Gauge R1-30mm - AMS Ready

Comes with two boxes and a set of convex and concave gauges, suitable for radiuses 1mm - 30mm inclusive. By default, the boxes and tiles are the same colour, with the tiles and boxes having different accent colours for concave and convex.…

Pobrania
5011
Polubienia
1337
Ocena
4,63
P
PrintablesOleg

Silica Slim Dry Box for Bambu Lab AMS Hydra and Stock Version

This Slim Silica Box is for the AMS Hydra Mod, but it also works perfectly with the standard AMS.

Pobrania
4984
Polubienia
398
Ocena
4,92
P
PrintablesMaximus Printus

Wednesday Addams - Thing Hand Top Fix

Model of the 'Thing' hand character from the Wednesday TV series.

Pobrania
4930
Polubienia
324
Ocena
4,98
P
PrintablesPEZ3D

Elegoo Cardboard Spool Adapter Ring For Bambu Lab AMS System

Use Arachne wall generator or your walls till be too thin and split. If you have issues with the ring being too tight on the spool, you should print the test print I included to measure the hole and contour accuracy of your…

Pobrania
4870
Polubienia
428
Ocena
4,89
P
Printables3DP_Park

Hamster

This is not my original design. STL from: https://www.myminifactory.com/object/3d-print-hamster-family-86168?fbclid=IwAR0IJS9i5vU7BYf6yujjqBY44UxPCfyM8NnPRLsSVuO8uSRqU6FDMgttSyU Post-Printing Category: Art

Pobrania
4803
Polubienia
338
Ocena
4,89
P
PrintablesOurAngryBadger

Bambu AMS Feeder Protector / Adapter

This is an old design and has now been replaced by The SENATE Check out the new design here: https://www.printables.com/model/513350-the-senate-ams-feeder-button-and-protector-for-bam This is a remix of Bambu AMS Feeder PFTE Adapter by…

Pobrania
4552
Polubienia
737
Ocena
4,67
P
PrintablesDutchWorkX3D

X3D-v3 Riser | Bambu Lab X1/P1 AMS Stand

I designed v3 from scratch based on the v2 version. It now has more strength and more place for honeycomb / hex add-ons. I have added: Honeycomb / Hex Ledstrip holder Honeycomb / Hex Build plate holder Honeycomb / Hex Top glass holder I…

Pobrania
4525
Polubienia
1390
Ocena
4,86
P
PrintablesAdam

Dashboard wire trim fit clip for dash cams

This clip fits between the trim panels on your car's dashboard to guide a dash cam cable. Design features This has an opening for a 4 mm wire, and is designed to be printed in flex material to make sure it doesn't vibrate or cause…

Pobrania
4356
Polubienia
2340
Ocena
4,94
P
PrintablesSaganaki

Bambu labs Tool Box AMS & Embossed versions

Bambu Labs logo added to the lid with an AMS and an Embossed version. You also need 8 M3x20 bolts for the hinge and latches. Orginal design by Coffey72 which itself is a remix of a design by zx82net…

Pobrania
4343
Polubienia
1132
Ocena
4,89
P
PrintablesJal Shah

Bambu Lab AMS Active Filament Dryer

A simple solution to keep filaments dry even when they're stored in Bambu AMS for a long time. While AMS does store filaments quite well with airtight container, I just wanted active drying solution implemented as I have been running all…

Pobrania
4271
Polubienia
267
Ocena
0
P
PrintablesLucoot

Bambu Lab X1 AMS Front Desiccant Holder

Should fit V1-V3 of the AMS. Printed in Black ABS. Sensor version needs support. Brim recommended since it is tall and narrow. Update: Version 2 w/increased desiccant volume.

Pobrania
4261
Polubienia
379
Ocena
4,87
P
PrintablesJS-studio

Wednesday Addams Bust

I think Addams' Family belongs to the heart of Halloween. So here's the first family member. The bust is designed for easy printing without support. It is divided into 4 parts, including a simple small pedestal and a united bust. Happy…

Pobrania
4259
Polubienia
580
Ocena
4,95
P
PrintablesMalwinS

Samsung Galaxy S24 Ultra TPU Case

TPU CASE for Samsung Galaxy S24 Ultra As I have to wait for a few weeks for my leather case to arrive, I decided to model up a TPU Case myself for my Samsung Galaxy S24 Ultra. WIP - Im currently testing it myself, but it fits nicely so…

Pobrania
4179
Polubienia
335
Ocena
4,56
P
PrintablesRomRider

Stand Samsung Galaxy Watch 4/5/5 Pro/6/7/Ultra

A stand to charge your Samsung Galaxy Watch 4/5/5 Pro/6/7/Ultra with cable management! It supports all sizes for all the watches: Galaxy Watch 4 Classic 42/46mm Galaxy Watch 4 40/44mm Galaxy Watch 5 40/44mm Galaxy Watch 5 Pro 45mm Galaxy…

Pobrania
4113
Polubienia
370
Ocena
4,67
P
PrintablesNISAkuh

ID HOLDER V2 [ONLY 7 GRAMS]

ID HOLDER V2 Fits almost all card sizes and types CHANGE LOG 08/26/2026 Added Double ID Case Main Changes Removed push down pins (Breaks too often) Fixed hexagon pattern Optimized for easy printing Main Features Horizontal Print - Under…

Pobrania
4085
Polubienia
1163
Ocena
5
P
PrintablesArioch77

HoneyComb Storage Wall - Stack Printing with AMS

Trying to speed up printing a HSW, Stacked 14 inverted HSW to get near 24H print time. With AMS on X1C each "layer" of HSW is printed with PLA or PETG, that permit each layer to not be glued to each other (So 1st HSW in PLA, 2nd in PETG,…

Pobrania
4006
Polubienia
869
Ocena
4,71
P
PrintablesMartinSpajaard

Bambu Lab AMS Desiccant Tray adaptation

There is no need to follow the curved form of the bottom of the Bambu AMS. So this is a straightened version of Eldon's model. It has a bit more volume, is easier to print, no supports needed!, and I designed a stand to fill the trays to…

Pobrania
3987
Polubienia
469
Ocena
4,3
P
Printableswarpster

Bambu AMS Feeder Button

My remix of the AMS button. I added back the angled part to make it easier to push, still accepts the PTFE tube to protect against wear.

Pobrania
3984
Polubienia
435
Ocena
4,56
P
Printabless.e.b.

Hygrometer Stand for Bambulab AMS

This is a stand for the round common Hygrometers. I designed it specifically to fit into the middle of the Bambulab AMS (tested with new version, bought in 2023). Of course it can also stand alone anywhere else. Secure fit, Hygrometer…

Pobrania
3935
Polubienia
632
Ocena
4,9
P
PrintablesDesignCraft

OVERTURE Bambu Lab AMS Cardboard Spool Adapter Ring

This adapter system wraps the edges of an OVERTURE 1kg 199x66mm cardboard spool in order to: provide smooth rotation within a Bambu Lab AMS prevent carboard debris from depositing within a Bambu Lab AMS Features: Reusable OVERTURE…

Pobrania
3871
Polubienia
389
Ocena
4,97
P
Printables3D PRINT

Addams Family - Magnetic Thing

To be placed on the fridge, using: 4x 8x3 mm magnets or 4x 8x2 mm magnets. 4x 10x3 mm magnets. 4x 10x4 mm magnets. 3x 20x5 mm magnets. 1x 40x7 mm magnet. and without the magnet holes download another model here:…

Pobrania
3836
Polubienia
965
Ocena
4,96
P
PrintablesSHQ

TechTom's Rear Desiccant Silicagel Tray for AMS

This is arguably the best tray for desiccant beads for the AMS of Bambu Lab. The lid has a recessed grip where a lamella of the tray sticks through. this allows to easily take out the entire tray including the lid but without the risk of…

Pobrania
3768
Polubienia
504
Ocena
4,94
P
PrintablesJacky Huang

Bambu Dry box AMS Hygrometer Silica Gel

I had changed all my box to v3, please use my AMS dry box center v3.3mf for print. If the hygrometer(some is so big) is a little small, please use same paper to fit it(I used it in photos). For drying Bambu AMS box, you can directly add…

Pobrania
3707
Polubienia
539
Ocena
4,95
P
PrintablesNairod

Fast Start GCode + Improved Quick Bed Leveling - End Retract Back to AMS for Bambu Lab X1 X1C & P1P

V5 For P1P and X1C As this is skipping the LIDAR but keeping the Bed Leveling if desired. Date : 5 March 2023 Improvements: -Improved the overall speed of the start gcode -Reduced the purge of filament by a factor of 21 times 5mm vs 105mm…

Pobrania
3705
Polubienia
236
Ocena
4,67
P
Printablesfredck

Bambu Lab AMS Small Spool Adapter

This is a remix, designed from scratch, of the great model created by Billie Palmer . It has the following differences: Made it longer, to better support small spools. Added a long support at the bottom side, which touches the bottom of…

Pobrania
3649
Polubienia
209
Ocena
4,53
P
PrintablesMarvin A

Samsung Galaxy Tab A9+ Wall Mount

I made a wall support for the Galaxy Tab A9+. As the model is quite large with a side measuring 264mm, I used my Sidewinder X1 3D printer to print it. (You can find the version for the Tab A9 (8,7") here Samsung Galaxy Tab A9 Wall Mount…

Pobrania
3614
Polubienia
162
Ocena
5
P
PrintablesErvin

Samsung galaxy A54 phone case

Simple case for the Samsung A54. I have included a fusion360 file. It also includes modifications to fit 2 cards (ID, credit card...) and to hold 2 coins; 1 and 2 euros in size, to unlock shopping carts. I did some modifications to…

Pobrania
3599
Polubienia
134
Ocena
4,9
P
Printableschenwei

put on the printer Bambu AMS drawer Stand

The length has increased and is basically consistent with AMS. With the increased height, opening the drawer will not touch the printer screen. Move the spacer behind the middle to cover the handle. It is recommended to use PAL printing,…

Pobrania
3596
Polubienia
1179
Ocena
4,6
P
PrintablesDesignCraft

ELEGOO Bambu Lab AMS Cardboard Spool Adapter Ring

This adapter system wraps the edges of an ELEGOO 1kg 199x64mm cardboard spool in order to: provide smooth rotation within a Bambu Lab AMS prevent carboard debris from depositing within a Bambu Lab AMS Features: Reusable ELEGOO nameplate…

Pobrania
3418
Polubienia
337
Ocena
4,88
P
PrintablesErick

Silica Dry Box with Handle for BambuLab AMS Hydra and Stock Version

Remix to add a handle to the lid. Had to shorten the box to accommodate the lid so you will lose some volume. Includes versions for the rectangular and round hygrometer. Link for rectangular hygrometer:…

Pobrania
3370
Polubienia
324
Ocena
4,98
P
PrintablesDarthxRinzler

Bambulab AMS Hydra PRO Silica/Desiccant Dry Boxes

I redesigned them mostly from scratch to make them slimmer and fit in th AMS with the new Hydra Pro mod. They're about half the size and fit in the Hydra Pro AMS like a glove. The convenient knurled tab on the back make it a breeze to…

Pobrania
3302
Polubienia
305
Ocena
5
P
PrintablesYaBoiSnek

Samsung Galaxy S22 ultra case

Should be fairly straight forward to print. I've had good results without supports but you may need some just for the side cutouts. Can be easily customized by removing top and bottom layers, increasing wall count and playing with the…

Pobrania
3297
Polubienia
194
Ocena
4,5
P
PrintablesCB

Great Wave off Kanagawa - Multi-colored for AMS

This was painted in Bambu Slicer for the AMS with four colors. Rather than just painting each layer a different color, I tried to match the original print as much as possible, including painting on some details on a few layers. I painted…

Pobrania
3290
Polubienia
3071
Ocena
4,91
P
PrintablesMediaMan3D

Adapter Rings for 250g Filament Spools for Bambu Lab X1-Carbon AMS (140-154mm diameter)

UPDATE 12-16-2022: Added support for Stronghold and AMOLEN 250g spools. ---- Eryone spools are a different size (150mm diameter), so I modified the original design in a couple of ways. This should work for any filament spool that is…

Pobrania
3275
Polubienia
475
Ocena
4,63
P
PrintablesAdam L

SpinCycle : Keep every spool dry, For Bambu X1 /P1P AMS and Print-from dryboxes

Update 2/19/2023: Added no-water-drops design for Top and the Default Jar Size per user comment/request (top/bottom text remains). Update 2/7/2023: Added a 12 mm-shorter version per user request. This model is designed to make storing and…

Pobrania
3267
Polubienia
733
Ocena
4,92
P
Printableshumebeam

Hydra PRO - Advanced Bambu Lab AMS

Notice! This is only compatible with the original AMS. Please view my other designs for designs supporting other AMS systems, there are plenty. Buy Hydra PRO I've teamed up with a few different stores around the world offering the printed…

Pobrania
3261
Polubienia
1221
Ocena
4,8
P
Printablesschiko

PTFE / Cable Clip for Bambu Lab A1 (mini) without AMS lite

I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … If you want to use your A1 (mini) without AMS lite the cable…

Pobrania
3259
Polubienia
431
Ocena
4,94
P
PrintablesJerryie

Lego technic beams set 1-15

If you would like me to include a particular beam, like a plus-shaped hole, or a sideways hole, please leave a comment. Compatible with the original LEGO Technic and LEGO Technic pins here

Pobrania
3238
Polubienia
322
Ocena
4,67
P
PrintablesConcreteHead

Wednesday Addams (Netflix)

STL parts are aligned as i print them on my Prusa MK3+. You need to use Supports. No need for much Infill, 3-5% will do the job. Thing is not included! You can download it here on Printables and scale it to fit:…

Pobrania
3189
Polubienia
456
Ocena
5
P
PrintablesUnchainedAi

Silica Desiccant Dry box for Bambu Lab AMS - Airways for Hydrometer and Resized Lid

After printing both versions of the center case that supported the addition of the hydrometer, I realized that while the second case looked better aesthetically it did not function well due to the lack of airflow around the unit. Remixed…

Pobrania
3173
Polubienia
369
Ocena
4,88
P

ROSA3D FILAMENTS MASTERSPOOL - REUSABLE REFILL DISCS COMPATIBLE WITH AMS

COMPATIBLE WITH AMS! Are you a beginner 3D printing enthusiast or a seasoned professional? Are you looking for a way to reduce the amount of leftover spools after using filament? Or are you wondering how to minimize waste after 3D…

Pobrania
3128
Polubienia
182
Ocena
4,95
P
PrintablesZzoyozZ

Bambu Lab AMS Cable Clip

Print in ABS or PETG.

Pobrania
3113
Polubienia
667
Ocena
4,93
P
PrintablesPrintForge

Easy-Thread 72mm to 52mm Spool Adapter for Bambu AMS Lite for Sunlu+Anycubic+Crealty

This spool adapter downsizes a 72mm filament spool bore diameter - Sunlu, Anycubic, Crealty, Hatchbox, et al to fit the Bambu Labs' AMS Lite rotary spool holder. Tested on A1 Mini using default settings for any given layer height and…

Pobrania
3094
Polubienia
193
Ocena
5
P
PrintablesIsaac Martinez

Thing Addams Family

Whenever Halloween comes around I just can't help but make a bunch of halloween stuff ahahah Oh! This model is painted and is not a multifilament print! If you like this model please check out Lady Fingers,in my other recent models. She…

Pobrania
3079
Polubienia
646
Ocena
5
P
PrintablesHologos

Reduce Purge Waste with Bambu Lab AMS

Hello fellow Bambu Lab owners. Do you hate all that waste that the AMS units generates? Me too. That's why I made this guide how to reduce / tune / calibrate / optimize the purge waste. If you find this guide helpful, I'd be glad if you…

Pobrania
3045
Polubienia
1014
Ocena
5
P
PrintablesMotani_Works

Samsung galaxy S24 Ultra phone model

S24 Ultra 3d model, high level detail, precisely and carefully made. UPDATE: model is EVEN more precise and accurate and has more available download files (STEP, OBJ and MTL). Best print settings(on anycubic kobra 2 max): infill 40%, brim…

Pobrania
3044
Polubienia
98
Ocena
4,75