Wyniki wyszukiwania: ape

HexScraper - Printbed scraper

I could not find a scraper sporting a hex pattern, clearly this had to fixed. Perfect for scraping prints off your build plate, as well as your other scraping-needs. Should be printed with .15 or smaller layer height to make the edge…

Optimized Bed Scraper XL

News 2024-04-10: Please also check out my new Blade Dispenser for this Bed Scraper: This is the XL version of my popular Optimized Bed Scraper with quick-change blades. The cutting edge of the blade is 45 mm, a full 30% longer! Each blade…

🟠 Thin layers scraper (tiny+ergonomic)

UPDATE 3.1.2023: added V2 version with different inner shaping → same external size & characteristics, quicker print Info: 🟠 round edge → longer edge → scraper lasts longer then other spatula types scrapers if it is less sharp on one…

Hexagonal paper towel holder

Hi guys, designed this simple nice hexagonal paper towel holder for my kitchen. Four versions available: with holes - you want to screw in the holder to the bottom of your cabinet for example without holes - you want to stick it to the…

Ultimate Ice Scraper

It's -8℃ currently where I am. I needed a new ice scraper. It's strong and I've gone through several iterations to get it to feel comfortable in the hand. There are ribs along the handle for better grip as well as a large indentation at…

Printbed Scraper - Bed Scraper

CIUNCARELLO boats a distinctive design and features that sets it apart from conventional bed scrapers, making it the ULTIMATE Accessory for your 3D Printing needs. 8x6mm Magnets are strategically placed at both the front and back ends…

Scraper for Build Plate - Version 2

Note added Oct. 5, 2021 : As some people have had problems printing this without infill, I have added files for 15% rectilinear infill. This scraper can be safely used on the build plate with little danger of scratching or gouging the…

Printbed Scraper

PLEASE READ THE PRINT INSTRUCTIONS! TRIM IT AND DON‘T GIVE BAD RATING JUST BECAUSE YOU CAN‘T READ INSTRUCTIONS! After printing i cut the front of the shaper to make the tip a little bit more stiff and when cutting it angled it will be…

Tape Dispenser, Multi-size/Modular

This is a Modular and multi-size tape dispenser. I first designed this as a single size (3/4in) non modular dispenser, held together with screws. The comment I got the most was : were are the other sizes? I refined the design, corrected a…

Scraper

A quick but sturdy print bed scraper that's intentionally long with open infill so that you can also use it to swipe at the purge material. It will catch in the infill and drag away cleanly. To fit the Prusa Mini use the 3mf and scale to…

Hex-Grip Bed Scraper – Print Removal Tool

🔥 UPDATE: V2 NOW AVAILABLE! An improved version (V2) featuring new side-grip grooves for better control is now out! 👉 Get the new V2 version here: This is a bed scraper / print removal tool designed to safely and efficiently remove prints…

Empire State Building (SKYSCRAPER) - detailed model

Skyscraper modeled onscreen on YouTube. I used PLA, 0,10 mm layer height and 0.4 mm nozzle. You dont have to use any supports and 5 % infill is fine. In this configuration, it will take roughly 17 hours to print.

Modular Scraper for 3D Printer Bed Cleaning – compatible with Stanley Blades & printable blades

This modular scraper is designed especially for 3D printer bed cleaning – perfect for removing filament residue, glue, or adhesion products from the build surface. It can be used with a standard Stanley blade or with various 3D‑printed…

Toilet paper roll holder gnome buddy gift - Toilettenpapier Toilettenmännchen Klorolle Geschenk

Please check your roll size before printing. My roll diameter is about 10.6 cm. If this is to small you can rescale the model in the slicer program I recommend to set supports just under the free arms (use support-blocker at other parts)…

FlexiScraper - Sharp Printbed Scraper

ENGLISH Introducing FlexiScraper : the ultimate solution for effortlessly accessing low-profile prints and stubborn support residue. Engineered with precision, its sharp edge glides seamlessly beneath prints straight from the bed. With…

Scraper

How about this scraper to replace your fingernails? This is a round design scraper useful 360 degrees. Compared with a spatula-shaped scraper, the amount of filament used and the time required can be greatly reduced. It is intended to be…

Razor blade scraper

A scraper using simple razor blades which is not flimsy or imprecise. The blade is held firmly in place. Please be careful when inserting the blade. Strongly inspired by https://www.thingiverse.com/thing:2024019 Use razor blades such as…

Bias Tape Maker 5cm (Zakladač šikmého proužku)

This is a remix of bias tape maker from https://www.thingiverse.com/thing:3880491 by Oscarko. It is increased by 150% (for 5cm tape), the wings are clipped a bit and the bottom is flattened for better bed adhesion. Print instructions…

Interlocking Sorting Cups (Square Shape)

What is this [ Update3: A couple of more variants were added after recent user requests. 1) Now there are models with a 1x3 and a 2x3 footprint including larger lids. They should work the same way as the other variants and should be fully…

Spatual - Scraper - Spachtel

30% infill 0.20 detail http://www.thingiverse.com/thing:3406899

Minimalist Quick Change Toilet Paper Roll Holder

From original author description: It takes about 5h to print all parts at 60mm/s, uses only around 50g of filament at 20% infill, and can easily be printed on any 3D printer as the shapes are very simple, with no bridges and maximum 45°…

M2 - M22 hex-shaped Nuts (incl. STEP)

⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of hex-shaped nuts, ranging in size from M2 to M22. Looking for Torx, Hex, or Phillips screws – with or without heads ? Or maybe square-shaped…

Bed scraper - MK2 - 8g - 25min

Big brother to the mini bed scraper =) Print in PETG and it's almost indestructible. https://www.printables.com/model/55519-bed-scraper-fast-print-15min-minimal-filament-usag/comments/420863

Wrapping paper cutter

Wrapping paper cutter for easy paper cutting. This is better than bothering with scissors. Model is programmed for a 9mm wide knife. →…

Bambu Small or odd shape spool holder for AMS

Please heart, comment, and post makes! Seeing what you all use and how you use it makes it worth making more designs! 2 sided spool and spacer. Must print all 3 with most spools. Must adjust spacer to your spool size (15mm height seems to…

Photo Paper Backdrop Stand (A4)

A simple stand that turns a regular sheet of A4 paper into a seamless "infinity" background for photographing small objects. The paper slides into the side supports, creating a smooth curved backdrop without visible corners. The side…

Walnut-shaped Nutcracker

Many 3D-printed nutcrackers are bulky, rectangular, or visually utilitarian, often consuming far more filament than necessary. I wanted a compact design that looks good even when left out in a bowl of walnuts in the living room, without…

Mini Toilet Paper Buddy

This Mini Toilet Paper Buddy is the tiniest roll of TP you’ll ever need! 🧻✨ Perfect for adding a touch of humor to your desk, shelf, or workspace. ✅ Super Small & Funny – A tiny toilet paper buddy for any occasion ✅ Perfect for Gag Gifts…

Low Poly Howling Wolf (Scraper Holder / Decoration)

Low Poly Howling Wolf (Scraper Holder / Decoration)

Ultimate Magnetic Bed Scraper Spatula with Printable Blades

This is the final version of a bed scraper that evolved from a much simpler model I designed years ago. I created it by combining features from several other models I found online, but none of them included everything I needed. It has…

Vallejo, Army Painter, Reaper Paint and Brush Holder

Paint bottle holder designed to fit Vallejo, The Army Painter, and Reaper MSP paints. Each brush or tool slot has a cutout for easy cleaning if things get messy inside; it also helps fit The Army Painter triangular brushes. This model has…

Painters Tape Labeler

Got this idea from the video in the first photo Print at .01 to make sure the cutting edge is sharp. May be best to print on a resin printer.

Tradicional Triangle V shape pot and planter - vase mode

As some of you asked - we made the cilinder shaped triangle pot into a V shaped one! We hope you will enjoy it as much as we do :) Simple remix of the Tradicional Triangle Plant Pot and Planter Best to print in 2 or 3 layered vase mode…

📼 Cassette tape business card holder/case

Info: original-size casssette case with realistic tape lookalike design drawn on the case Print info: can be printed in place or separately, because as everybody knows - cassete cases can be dismantled and this in not an exception (with…

Titanfall/Apex Legends p2020

Paper scissors

The PetG is recommended 0.2 layer height 10% infill You can insert a 3 X 10 mm nut/bolt in the joint in case you use PLA

HexScraper - Printbed scraper (with magnet)

I remixed the HexScraper - Printbed scraper from visle to add a magnet so I could hang it from my X1 Carbon. The STL is designed for a tight fit using an 8mm x 3mm magnet but I have included a parameterized Fusion 360 file if you want to…

Yet Another Portable Photography Paper Backdrop Accesory

Introduction This model combines 3 hobbies I have: Photography - allows me to take photos. Hot Peppers - Allows me to take photos of beautiful hot peppers I grow in my garden. 3D modeling and printing - Have the joy to create stuff that…

Diaper Genie Complete Replacement Lid - For Older Models

One of the hinge pins broke on the lid of my Diaper Genie Complete model diaper pail. I searched everywhere online for a replacement but none are available. Rather than buy a whole new $50 diaper pail and send this huge plastic…

Aluminium/cling foil or baking paper holder

My goal was to create a simple model that requires no supports and would print in an acceptable amount of time. For this last requirement, I made the walls 1,8 mm thick (as I am using a 0,6 mm nozzle - you can safely set 0,6 mm line…

Kitchen roll holder for 2/4 rolls (foil, baking paper, etc.)

Kitchen roll holder for 50x50mm kitchen rolls, like aluminum foil, baking paper, etc. A version for 2 or 4 rolls available. The two-roll version can be printed with Prusa Mini. The outer dimensions are 245x60x205mm (4 roll version), or…

V1.0 Universal Keycap Puller [Apex 9/Pro Replica] *V2.0 AVAILABLE*

V2.0 is available here, the model you are currently seeing is outdated This keycap puller is a V1.0 replica of the Apex 9/Pro. It is a replacement if lost, broken and is compatible with any keyboard . It allows easy and safe removal of…

Paint Roller Scraper / Cleaning Tool

A must-have tool to help get the paint off of your paint roller at the end of a job or between shifts. Provides an easy way to squeeze the bulk of the paint off of your paint roller before rinsing the rest down the drain. This is an easy…

Paper towel Voronoi design

Introducing a table-top paper towel holder featuring an intricate Voronoi pattern, designed for multicolor printing. This holder is both stylish and functional, adding a unique touch to your kitchen or dining area. Profile details : No…

Everyday Comb in a Classical Rounded Shape

I'm thrilled to share my latest creation: the Everyday Comb, designed with practicality and a touch of elegance in mind. This working comb combines ease of printing with the comfort of daily use, featuring a classic rounded shape…

Quilt / Tapestry Wall Hanger

This is a wall-mounted quilt hanger, based on a wooden design I've seen. It's simple, requires no supports, does no damage to the hanged item and looks great! All pegs can be used with all versions. V1 Simpler, and does not include hole…

Printer Bed Scraper with Replaceable Printed Blades

LATEST MODEL Since 2025-07-13 I recommend using this model instead: Ultimate Magnetic Bed Scraper With Replaceable Blades This is a spatula for removing objects from the print bed, with easily replaceable printable blades. When one side…

Gridfinity Scotch Tape Dispenser

This is a tape dispenser for the Gridfinity modular storage system. It is compact at 1x2 squares, and features cutting teeth that split tape effortlessly. It is not possible to stack other blocks on top. This takes standard 2 inch tape…

Stacking Storage Box System / Stapelbehälter

Stackable containers in several heights with optional separators (which can be added and removed anytime as needed) to organize your smaller parts. Additional signs with easy changeable labels (printed or just hand written) are available…

toilet paper holder cloud 3 rolls

This is a simple wall-mounted toilet paper roll holder. It is mounted on the wall with two screws but has also enough surface on the back to glue it to the wall. This holder supports up to three rolls of toilet paper with a diameter of…

Rosslyn Chapel Master and Apprentice Pillar.

Rosslyn Chapel Master and Apprentice Pillar.

Stackable tea bag holder / Teebeutelhalter stapelbar

V2 is now available. Stackable tea bag holder Dimensions: 6.8 cm wide, 8 cm deep, 10 cm high +++++++++++++++++++++++++++++++++ Stapelbarer Teebeutelhalter Maße: 6,8 cm breit, 8 tief cm, 10 cm hoch

Tiny VHS Tape

This model is basically a stitched together and scaled down version of this giant VHS tape , but with a few added details to make things work at a smaller scale. Assembly Assembly is relatively straightforward, the two pieces go together…

Paper Towel Holder - Suspended

Print, assemble, screw into overhead space. Slide roll in and down once the holders are in the roll. Pull up then out to remove empty core. Print instructions Print

PRUSA Bed Scraper / Spatula CCD Version

Bed Scraper / Spatula This is a modified version of the PRUSA one. Handle width is good, I just wanted it thicker. Handle is now 7.62mm thick. (0.300” inches) All edges finger safe, except front blade edge. PLA scraper version for TPU…

Scraper with PINDA tool

PLA works well, though higher temp materials will likely last longer if scraping while bed is hot. 40x180x9mm 1mm PINDA tool depth Rev 1: Slightly reworked geometry for strength and reduced overhang angle

Gravity-Honeycomb-Paperholder

This is a fast-to-print paper holder uses the gravity and a rolling gear to hold the paper in place. This is an addition to the existing Honeycomb storage wall and a remix of the Gravity Broom Holder (only for paper or similar). I…

Headgear Helmet Construction for vvk187 Lego Man Toilet Paper Holder

Construction Helmet for Lego Toilet Paper Holder Man by vvk187 - https://www.thingiverse.com/thing:1996077 Fits the NEWER version of Lego Man The Helmet is based on https://www.bricklink.com/v2/catalog/catalogitem.page?P=3833#T=C

America Shaped Flag

Wall mountable flag in the outline shape of the United States. Print instructions Automatic (M600) color changes. Black White Red Blue White again (preferably silk white for the stars) Mount on the wall.

Ben's Better Paper Pot Maker

The idea behind a paper pot maker is that instead of using wasteful and difficult to work with plastic seed starter pots, you can use strips of newspaper to quickly form small paper pots. Then when the sprouted plant is big enough and…

Pen and paper holder / desk organizer

Simple design but works really well for me. I intentionally kept the pen trays small to prevent myself from putting useless crap into them. Printed in a bright color it looks pretty fantastic. Paper tray is 90x90mm. Due to feedback I…

Georgia-Pacific paper towel dispenser key

I couldn't find a “key” that had both parts on it, so I sketched this one up

Minimalistic print remove scraper

This is a non spatula style scraper. Simple, Small, but functional and requires much less filament than a spatula-shaped scraper.

No Touch Tool, retractable, door opener, key turning, pinch papers, push buttons...

I designed yet another No Touch Tool, did it retractable because if the areas that may touch contaminated surfaces are not enclosed somehow they may contaminate others like your pockets or your hands after it has been use. This tool is…

kindle paperwhite 11th generation GRIP

I made the 3D model from scratch but got the idea from Kindle paperwhite 4 grip. PLA. Took about an hour to make. Fits the kindle paperwhite 11th generation. 74.2 x 124.6 x 8.1 mm Slight issues with model that do not effect the print or…

Gridfinity Fatmax Tape Measure Holder

Summery This is a Gridfinity tray to hold a tape measure. it works with a stanley 25' fatmax, and standard stanley 25'. History Gridfinity is the ultimate organizer for your whole workshop! Learn more at Find more Gridfinity accessories…

Hexagons for HexScraper

Hey, I was just trying tolerances with hexagon, but I found out I really like how it looks, so i printed more hexagons and I think it looks great. Of course all credit to author of HexScraper, I just made little modification.

Pax 2/3/Mini Vape Charger-Case Combo + Storage

This is a remix of the pax storage case from thingiverse by maker giek2000 . I modified this case to include an insert for the pax charger, so the device can be charged while being stored, combining all accessories in one single neat…

Tape Organizer Wall Mounted

I have designed this tape hanger because I have lots of rolls of different types tapes and have a limited space left in my desk drawers, so it came to my mind to design a solution and this is what I came up with, I am using these for a…

Prusa Mini Hook for scraper tool

Designed for the smaller version of the scraper, linked below. I wanted to store the scraper on my Prusa Mini so I remixed the original hook to fit the Mini. The hook snaps into place. I printed mine in PETG. If you do not get perfect…

Gridfinity Dymo 160 Tape Holder

Holder for Dymo LabelManager 160 label tape, compatible with the popular Gridfinity organization system. More details on the Gridfinity system:

WaveShare 4.2“ e-Paper case - symmetrical and without holes

WaveShare 4.2“ e-Paper case - symmetrical and without holes. It can hold up to a big 10000mAh LiPo battery and has a mounting point for a ESP32 - Lolin D32 For my projects I wanted to have a symmetrical case to mount my often used…

LEGO Figure Toilet Paper Holder

Fully movable huge Lego Figure as a toilet paper roll holder Scale ~10:1 individual movable arms, hands, legs and head (depending on your printer settings & quality you should use different shoulder parts to ensure the arm is turning…

Casette Tape

Casette Tape Print Big. Add wall hang in back.

Low Poly Puppy Dog (Scraper Holder / Decoration)

Puppy Helper that can hold small items like keys, cards, and more!

Gridfinity 2x2 for 21mm Liquid Bottles e.g. Vape Liquids 10ml

A 2x2 Gridfinity Stand to store Bottles with 21mm diameter, e.g. Vape Liquids with 10ml.

Protection for Geekvape Zeus Subohm Tank

This is another model from my Vapor's World collection . Protection for Geekvape Zeus Subohm Tank. If the mod accidentally tips over, there is a high risk that the glass tank will break. This protection prevents that. No support required.…

Einstellbare Bohrschabone System 32 für Möbel/ Adjustable drill scraper System 32 for furniture

Aktualisiert am 20.11.2023: Neue Version "Ausrichtbolzen mit Sechskant" hinzugefügt. Jetzt können die Schrauben ohne zusätzliches Werkzeug angezogen werden. Updated on November 20, 2023: New version "Ausrichtbolzen mit Sechskant" added.…

Toilet paper cat replacement spare roll cat friendly toilet animal - Klopapier Ersatzrolle Katze freundlich

It would be nice if you post your make. Thank you

Prusament Spool Tape Dispenser

Simple Tape Dispenser inspired by Prusament Spool design Very simple dispenser for basic tape. Iťs designed for tape with total radius of about 5 cm, inner radius of about 2.5 cm and width 2 cm. But as you can see, there is some space…

Sturdy Ice Scraper - Super simple, Super stable

Intro Winter returns back to the northern hemisphere… Cold days and frosted cars are back… Car owners need a good and stable ice scraper now. And this is exactly what this model delivers! Why you'll love it? Print is done really easy…

Ice Scraper by ArtyL

I don't often get snow, but when I did, I realized that I would need an ice scraper! My wife has been using the red one for years because it is compact and easy to store in the car. The model is based off that design. Try it out and let…

Vykrajovátko na perníčky ve tvaru vločky / gingerbread cutter in the shape of a snowflake

It's just a gingerbread cutter.

A box for a paper cigarette box - 100s

Design and very well functional box for an 100's cigarette box (58 x 23 x 103 mm). Neodymium magnets 8 x 3 mm are used. The magnets are glued by super glue. The design is made for heavy use and long life. I also made a design for a very…

Survive: Escape From Atlantis! - Better Boats

I designed these boats to better hold the meeples in Survive: Escape from Atlantis! When moving the original boats during games, we found that the meeples inside would often fall out. In Survive , the point value is indicated on the…

Red Devil Ice Scraper

Tired of scraping ice with a boring old scraper? Upgrade to the Red Devil Ice Scraper and watch that frost disappear faster than you can say 'hot damn!' Sacrifice some high-quality filament such as bloody strong Modified PLA, ASA or PETG…

Ikea Skadis holder for Tamiya Masking Tape dispensers

Organize 18,10 and 6 mm Tamiya Masking tape dispensers on your Ikea Skadis board. See also my other designs for more ways to Organize your Tamiya tools on the Skadis board.

Drapeau de Sécurité pour Chambre Vide - Safety Flag for Empty Room

Drapeau de sécurité Carabine Ce drapeau indique que votre arme à feu est déchargée et ne présente aucun danger. Avec sa couleur orange, cette étiquette est très visible et rassure l'ensemble des personnes présentes et les autres tireurs.…

Apex Legends Caustic Grenade

Description An Apex Legends Gas Grenade from Caustic. It has a lock system to lock the Grenade when its open. You can add magnets for an better feeling. I used 5x1 mm magnets. The magnets are Not necessary. You need 4 M3 Screws and nuts.…

Christmas Cookie Cutters - All Shapes in Less Than 50 Minutes

Description Get ready for Christmas baking with our Christmas cookie cutters model! This set includes all the essential shapes you need for your holiday treats. Each cutter is 50 mm in size, with a height of 10 mm and a thickness of 0.8…

Hooks for Pleat Curtain Tape

Introducing our 3D printed hanging hooks for curtains and blinds with pleat curtain tape. Designed as an alternative to IKEA RIKTIG. Available in three different variants. Two variants allow for parallel or perpendicular hanging of…

plastic razor scraper

My other new print holds the scraper better. Use that one handle for plastic scraper blades

Scotch Tape Spool

This is a model of the spool that holds the roll of tape in our tape dispenser. If yours is broken, this might be helpful! Fits 3M Scotch Tape rolls tightly. As with all functional parts, you should print this in the strongest plastic…

xBloom Filter Shaper

A filter shaping tool made specifically for your xBloom specialty coffee machine reusable dripper. Perfectly shape KWF-155 filters and precisely apply just enough water to make filters hold their new shape. Filters can be formed directly…

60 Cookie cutters Basic Shapes 2.5cm (0.98 inches)

2.5cm (0.98 inches) The sizes are approximately! Do you need other sizes? Contact us! Please give us a ❤ if you liked the model, so we'll continue uploading interesting .STL! Ask us for custom designs! We are located in Buenos Aires,…

Cookie cutter in the shape of a Santa Claus sled

Cookie cutter in the shape of a Santa Claus sled. For Christmas baking of cookies. Vykrajovátko ve tvaru saní Santy Clause

Ergonomic tape dispenser

Artistic and ergonomic tape dispenser designed for office use. Compatible with usual office tapes. New GGvision studio creation.

Crayon-shaped Crayon Container

A simple crayon container for children to keep their crayons safe! Hello! I'm a teacher, and I designed this crayon container because my students needed a way to organize their crayons. I wanted to create something fun so they would love…

Wago 221-412, 221-413, 221-415 Din Rail Mount (Onshape)

Wago 221-412, 221-413, 221-415 Din Rail Mount . Can also mounted by using a M5 Countersink Screw on a Flat Surface. printed in PETG Perimeter: 3 Infiltration: 15% Layerheight: 0,2mm If you like it, give me a like. you can modify the Parts…

Apu Nahasapeemapetilon

Apu Nahasapeemapetilon from the Simpsons.