977 modeli
No support / FDM friendly If you have springing reduce the temperature of the nozzle to the maximum (205°c for prusament PLA ) (approx. 28 mm scale)
Wydruk około 0,84 €–1,02 € nettoWstępna wycena jednego wariantu
Simple but solid crevice nozzle for Karcher SE.5100 Inner Ø: 35mm Height: 200mm You can print from PLA (the walls are quite thick). Use PETG for better durability and flexibility.
Wydruk około 3,54 €–4,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Archery Target Pin with built in support. Designed with a .4 nozzle in mind.
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
Requires an O-ring measuring 34.52 × 3.53 mm.
Wydruk około 10,11 €–12,35 € nettoWstępna wycena jednego wariantu
Frsky Archer R6 casing During the design of the casing, care was taken to ensure that an additional strain relief for the antennas could be realized. In addition, the housing should be as compact as possible. For mounting in the model…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
Karcher WD3 zajišťovací klíč navzduchový filtr / Karcher WD3 lock key airfilter Sliced for MK4
Wydruk około 0,65 €–0,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
For models with an gas engine, the lower holders can be printed in TPU to reduce the vibrations. For the assembly you need 2 carbon fiber tubes with od Ø4mm and 45mm length as well a screw with approx. 2,2mm diameter.
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
https://www.amazon.fr/roulettes-Convient-aspirateur-Siemens-plastique/dp/B07BNDPZNJ/ https://www.kaercher.com/be-fr/discontinued_products/wd-3-500-p-16296810.html
Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu
Aus PET gedruckt, wird es super stabil, klappert nicht und haftet schon ohne Klemmschraube ganz gut auf der Schiene. Ihr könnt das originale Gewindeinsert einschmelzen! M4x6x6 oder M4x4x6.
Wydruk około 0,58 €–0,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A mount for an FrSky ArcherRS receiver with antenna guides designed to fit on my SoXoS 550 RC Heli. I soldered the leads to the ArcherRS and wanted to have it mounted nicely and the antennas guided, nothing too fancy but maybe useful for…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
wider finger spacer replacement for leather tab
Wydruk około 0,59 €–0,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Archer Queen : Clash of Clans
Wydruk około 16,34 €–19,97 € nettoWstępna wycena jednego wariantu
Print your own LTT Cable Management Arches! (Print/Assembly/Buyers Guide Attached Below) Shop the Original at lttstore.com Magnets: JC magnets are stronger than Amazon's: (JC recommended if you're not on a budget) Small(15x3mm): Amazon:…
An elven archer. Could be a wood elf. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The…
32mm scale Goblin miniature for tabletop gaming. Tips, donations or patronage is greatly appreciated ❤️
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Goblin archer. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. Let me know how it printed for you in the comments! Support more…
Thank you JonnieZG for sharing your "Vacuum Sucker for Drilling" ( https://www.thingiverse.com/thing:2939576 )! Great design since through the hole you still have full visibility on what you are doing, while in the same time through that…
A skeleton archer. Not sure how these can hit anything without eyeballs, oh well. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are…
Great model from Revennant. Remixed to no base and support free again. Subscribe to find out more support free 4K Time-lapse video: Subscribe Now! http://www.youtube.com/iczfirz Addiction to 3D Printing? Watch these time-lapse!…
A human with a short bow. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The mounted archer…
Turtleman's Low Poly 911 Turbo but with the wheel arches filled in to make a nice decoration The model in the photographs was printed from HobbyKing silver PLA matt with the bottom of the model against the bed. Gcode for Prusa Mini…
You can print this vase to offer one rose to your valentine. The arch from cupid will allow you to display to your loved one a rose to express your love :) No support needed, can be printed in all different material. Leave a like and…
Bosch PST 650 jigsaw. Makita BO 5030 sander. Makita 9910 sander. Bosch PKS 40 circular saw. 2 mm width. Category: Parts
An Orc scout. Suitable for 28mm tabletop games. . Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The other minis in the photos…
Human archer with longbow, cuirass and helmet Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. Let me know how it printed for you in…
Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 New hand for DUMMY 13 Tested and approved by Deadpool :D DUMMY 13 - Tomb Raider weapons set: /model/674005 Have fun!
I, well, I didn't really need these, masking tape and center marker works just fine, but I wanted these. So after browsing a bit I gave up and opened the Fusion 360 and just made a model myself. This may not be exatly perfectly as what…
[09/12] SAGITTARIUS - THE ARCHER Here is complete series of sculpted zodiac signs. All my photos are REAL and show an actual 3D-printed figure photographed by me. [ Suggested Print Setup ] Nozzle: 0.4mm Layer Height: 0.15mm ( You can…
If you like what I do and want to support my work check out my Patreon!
Yet another supportless goblin archer. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. The bald…
A collection of models to test support capabilities on your printer
Arche de diamètre 120 avec un bandeau LED pour éclairé un bureau. Imprimer 11 fois le corps et deux fois les pieds. Le montage est facile et ne nécessite que de la colle et des chute de filament à insérer entre chaque pièces. L'impression…
An archer from a desert land. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The other…
a knozzle to clean clothes like car sits or desk chairs.
Just print two holder without support. Snap in up to 16 arrows with 8 mm diameter. Three arrows with a diameter of 7 mm can be inserted in the middle.
In order to increase the suction power of my Kärcher WD 3.300 M (but should fit all Kärcher vacuum cleaners with standard hose like the WD3) workshop vacuum cleaner, it is possible to increase the hose diameter from the 38mm inside…
Wall Mount Bracket for Karcher Window Vacuum with accessories & EU charger. This is a lighter version of https://www.printables.com/model/245628-wall-mount-bracket-for-karcher-window-vacuum changed to EU plug charger and added a bracket…
Wall mounted Karcher pressure washer accessories clip. Requires a single screw to affix to the wall.
This is my archery arm guard, designed in Fusion 360. designed because not everyone has a heatgun to bend plastic, so after you have printed this just bend it by hand into shape. printed at 0.15 in PLA Category: Sport & Outdoors
If you like what I do and want to support my work check out my Patreon!
Mythical Archer Wall Art
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Info Both designed for 8mm arrows. I print arrowhead with 100% infill PLA and it works fine. For more durability, you can use etc. PETG, ABS. Recommended usage: Use the extender as close to the tip as possible for maximum efficiency…
If you like what I do and want to support my work check out my Patreon!
Arrow holders for your extra arrows, fits all micro diameter to large diameter arrows. Need to print 1 top and 1 bottom, plus 4 legs. I printed in PETG with 7% infill for top and bottom Legs are printed with 3 perimeters and 15% infill…
just glue two halfs togehter and set them in place
This piece is very small. So I've printed it with a .2 nozzle and very thin layers.
Easy to use fletching jig! Insert your arrow with its nock in the tube trace the lines qith a pen, and you are ready to fletch your spiral vanes. Note: two models available one for small diameter arrow (ie: skylon paragon…) and another…
just print two holder without support and snap in up to 12 arrows
If you like what I do and want to support my work check out my Patreon!
If you like what I do and want to support my work check out my Patreon!
You can see the full Obsidian Starfall army (32mm & 75mm) over on Kickstarter : https://www.kickstarter.com/projects/arcaminis-nexus/obsidian-starfall-female-dark-elf-army-3d-printable-stls?ref=rqup6p FREE 32mm Female Dark Elf Archer STL…
Credit to original creator: https://www.thingiverse.com/thing:2350587
This is a reinforced replacement part. I printed it for my father's washer six months ago and it is still in use without problems For model: K 2.03 / T-50 and others. KARCHER Water Inlet Elbow (discontinued). Part number: 5.063-984.
This is a work in progress project from my side, so there might still be some small bugs. I made a custom version of the new archetype blackbird toolhead for my needs. I have created a new core for my needs, to get use of a bambulab…
Cable wrap for the Karcher K2 and K3 models. I have a K2 and the K3 has the same hook. Looks like the K4 and above have a different system. Clips onto the cable gland under the hook quite satisfyingly! Personally I printed with 0.6mm line…
I wasn't really happy with the other versions I found here on Printables, plus I wanted to make them look as close to LTT's as I could. The other version I printed before had a small spot for the magnets and I wanted a larger magnet for…
By request: Archery Pocket Quiver with Mathews Logo. 8 mm and 11 mm is the diameter of the holes for arrows. For outdoor/3D you may use thin arrows so take 8 mm, for Indoor arrows or thick arrows take 11 mm. Other designs: Martin Archery:…
By request: Archery Pocket Quiver with Hoyt Logo Logo from here: https://www.thingiverse.com/thing:3033674 Other designs: Martin Archery: https://www.printables.com/model/431226-archery-pocket-quiver-with-martin-archery-logo PSE:…
This is a high res version of Delicate Arch in Arches National Park located in Utah.
Auch verfügbar unter:…
A set of several archery targets featuring detailed a detailed rope circle target, various wooden frames, and a stencil to help paint target rings on the rope targets if desired! I love these as scatter because they're a great mix of…
Removable cable holder for Karcher Steam Cleaner, model SC3.
These prints work as fully functional adapters for the Karcher VC-3 and similar. Fit is perfect for my printer even the snap-fit but as usual, your results may vary. Fusion360 file is included for easy modification. It's meant to…
Two holders to choose from - vertical and horizontal. Both easy to print. Have fun.
A Rabbit Archer. Category: Toys & Games
These archery blinders are designed for archers like me, who struggle with eye dominance or focusing on the target with both eyes open. There are two variants using the same shield. Each variant can be clipped onto a baseball cap that.…
replacement Karcher bayonet adapter 1/4 Applicability: Karcher K3, K5 and similar Compatibility: aliexpress sky Category: Parts
Hi everyone - here's my first Frosthaven model! I've always loved the Inox, so it's no surprise that I also love the Algox. So, here's my printable proxy model for the Algox Archer; maybe we can get these things all built out before the…
Hi! I'll show you how to easily organize pipe in your WD3. Personally I hated when the pipe was not in place, so I had the idea to fix this problem. I designed pipe holder, which makes life easier.
Fletching jig for original Ek Archery 7.5" Adder Crossbow Bolts by Joerg Sprave (2 Vanes). Print: 1x Base 1x Arm_A (or Arm_A_0.3_Offset) 1x Arm_B (or Arm_B_0.3_Offset) 2x Lever Parts needed: 3x M3x30mm Screw FH 3x M3 Nut (recommended…
Info Working mini bows wih arrowhead. Both are design from pictures of Hungary and Turkish bows. Bowstring is from ordinary rubber band. Hungary bow - simple design Hungary bow - real look Turkish bow Arrowhead is design for 3mm skewers.…
This post contains 3 models related with the practice of archery: The first model is a simple clip, used to keep the turns on your string when putting it in a storage. The second one is a replacement for the finger wedge in finger tabs.…
Recreated base part that attaches to the vacuum hose from the .stl provided here , as working with STLs in Fusion360 is a pain. This is to be edited to fit whatever tools you're looking to attach the vacuum to.
After I made my Inox Shaman model, I figured that it would be comparably easy to make an archer to match (since I could re-pose the male Inox Shaman body and then add the Archer accoutrements). It turned out to be a bit more involved than…
This is a mostly 3d printed fletching tool. Suitable for fletching arrows with 3 fletches. The frame is based on 20mm by 1.85mm flat Aluminum stock from the hardware store. The spacing between components can be adjusted to suite your use…
Hobgoblin Archer with warg Category: Games
I fixed few problems on original design. Wings will not break with light touch, bow and arrow fits in their place without sanding/drilling and I added number 1, but you can also use Dymo sticker instead. Use super glue to secure bow,…
I designed this Third Axis Leveling Tool for archers. The screw is recomended with 100% infill. You may have to recut the M10 ISO threads. I used the following bubble level:…
This is a suction hose hand grip (like 2.863-012.0) for my Karcher WD6 Premium vacuum cleaner. There are three versions attached. Because of the height for some printers it's shortened for the Ender3 and Prusa i3. It's meant to be printed…
Trigger Lock for Karcher Pressure Washers * WARNING USE AT YOUR OWN RISK * Locks the trigger in place for extended use. Has a hole to thread a string through. Tested to fit K2 and K7 (probably fits other models too) Print Settings Printer…
Good morning I present to you a nail to hold the target in place, easy to print, 50% filling for more solidity. Its shape allows it to be inserted and removed easily. thank you for your feedback Bonjour Je vous présente un clou pour…
A wall mount for the TP-Link Archer AX75E router, to mount it vertically to any wall or furniture, without the need of making holes or screws. It can be mounter in any direction. Made with OpenScad, with everything easily configurable, in…
Vaccum cleaner adapter Karcher for small place, ideal for cleaning car.
A nice way to conveniently store your bow when not in use. Mounts to wall using two screws. Use the two rests to add a snug fit, some foam padding to prevent any scratches. Print the rests upright as shown for best results. If you need…
The arrowrest is very simple to print. Just print the base and rest as you can see at the picture. There is no support. After printing just use superglue. This will ensure very good durability. I suggest to use ABS or PLA or material that…
Remixed model from https://www.thingiverse.com/thing:5652877, to hold 12 nocks. It's a challenging print if you have warping, recommend using raft. Some failed prints could be still used.
A simple arrow rest I designed for my little brother's bow after the one he had on his bow broke. Designed so that the fletching can go through with minimal contact. The one I printed was designed for 7mm arrows, 10 mm away from the…
Hi everybody, the SIAI Marchetti SF-260 is one of my favourite airplanes, unfortunately I couldn't find a STL to print a small one. That's why I spend last the few days with creating one in Fusion 360. It's not 100% detailed and exactly…
This is a complete rebuild of the 145 ft Steel Arched Truss Bridge by kabrumble. I also added rivets to the plates and added inside plates that print separately. All of the sections needed to be resized to create the proper arch. Also the…
This is a remix of one of the excellent models from mz4250's Fighter Collection. I changed the pose around a bit, added the half cape and helmet tuft (and grabbed the crossbow from another model in this same collection) to make a model…
Sagittarius (The Archer) zodiac figurine inspired by astrology and celestial symbolism.
Needed some big nails for my archery target. Sinks well in to the foam back and keeps the paper target in order.
Ein gutes Model von der Arche
I remixed this to make it 15% larger to accomodate larger broadheads. It should still fit smaller heads too. I also adjusted the clips and hinge bars so they clip in and pivot better without falling out. 10% infill. No supports (used…
i printed it in PLA (well… extrudr flax which is, as far as i know, PLA with flax fibres) and 100% infill. layerheight doesn't matter too much i guess since it needs quite a bit of sanding - inside for your finger and outside for the…
If you are an archer like I am, and you work on your own equipment rather than dump $$ at the archery pro shop, you probably build your own arrows. It is a well known fact that in any launched projectile the Center of Pressure (exerted by…
Simple archery target face pin. I wanted to be able to print different colours for others at my club to use as Barebow markers. Printed at 0.16 per layer, 1.2 wall thickness and 80% infill cubic. This seemed to produce the strongest build…
![OSVAC Female F32 -> Karcher WD series with rubber seal [xHain]](https://media.printables.com/media/prints/b71a27c1-9267-4670-9146-e964da248f9a/images/10373390_bae051a6-9257-43f9-a3b1-42b074d21a22_c061616a-6335-4414-8c31-27bf909e02c6/vacuum_hose_kaercher_f32.png)
![[09/12] SAGITTARIUS - THE ARCHER - Zodiac Series](https://media.printables.com/media/prints/6f972a6a-4342-4cb1-ab48-436260969f1b/images/9948970_d69b01e6-ecc9-4a00-a35d-37ee04c8c704_2379eb41-d013-4e71-ae0f-74fcd634a016/09archer_004.jpg)
