336 modeli
Spell AoE (Area of Effect) Damage Marker for Tabletop RPG Games on a Standard Square Grid. This Model includes multiple areas in one object, so you don't have to carry 5 to 8 AoE-Markers around. It has also different heights for different…
Wydruk około 2,89 €–3,53 € nettoWstępna wycena jednego wariantu
This is a remix that uses the scad file provided but the original designer to make a template for every Frosthaven class. I added the Gcode for a .25 nozzle and noted the color I use for each character in the filename. note some…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
A simple, but carefully designed test model for tuning Small Area Flow Compensation in your slicer. A companion spreadsheet is included to assist in manipulating the Flow Compensation model. Original post-processing script by Alexander T.…
These are the most common spell area affects. Each type are nested so you can print all the squares / circles / cones with a single print each. -Feb 5,2024 updated to make text same size on all pieces and add R to indicate radius
This is a remix of Andrei's Bag Clip (PRINT IN PLACE CAM). His print profile remains unchanged. This is to add more surface area to the lever to reduce failed prints. This is something I learned from Joel Telling's (3D Printing Nerd)…
Low poly Pokémon from Generation 3 are now available on Thangs ! 🎉 These are building blocks that you or your kids can use to create all sorts of terrains. There are millions of combinations and each person can create something new. You…
3D map of the Prague Castle area. Available on three scales: 1:5000 1:2500 1:1000 How to print your local area? Read the article: https://www.prusaprinters.org/how-to-print-maps-terrains-and-landscapes-on-a-3d-printer/
Updated 5/17/2025 While I like the simplicity of printing without supports, one of my friends could not get used to angling the tee when putting it into the ground so it ends up straight once at the proper height. I added an updated model…
Marker for Area of Effects for Playing Dungeons and Dragons (or other Tabletop RPGs) on a Standard Square Grid (with a width of 1 in / 25,4 mm) This Model includes more Areas (different shapes of Areas) in one Objects, so you don't have…
This is a remix of the V0.1 lower bay guard with the stock V0.2 endstop. I made of course some stealthburner-like adaptions :-) Integrated supports which will snap away with a tiny bit of force. It used to be a very tight fit at the left…
Shapes adapted from GW's released Terrain Area Footprints PDF, which although they don't precisely match the dimensions they have specified should match any paper print and likely their own released templates. Infilled with hexagons to…
A remix of thing:3857470 - agree with some commenters it would be nice to have a memory card slot somewhere on the unit, so we cobbled something into that bottom-right tray area. We like the slot designs of thing:5291498 so we used those…
I saw someone on discord cut themselves with a bed scraper. Twice. I remembered seeing this sign online and decided to make an STL of it.
Universal Area Terrain Bases for Tabletop Wargames After printing Sand Edges Texture using Filler/Spackle Winsor & Newton Galeria Burnt Umber (two coats) Winsor & Newton Galeria Raw Sienna (multiple passes of careful drybrushing) Matte…
Another Dry box or Silica-box for the Bambu Lab AMS. By dividing it in 3 compartments the contact area is roughly doubled. I took the measurements of the originals and redesigned it. The holes are back to horizontal, which prints a lot…
Info: I like original vase (thanks @Riskable !) I just wanted larger base area (which is touching the ground) so I increased dynamically this part → increased stability of the vase Size: note that default 100% size is quite small, so I…
SpaceX STARSHIP ARE Build Kit 1:200 Total high 69cm Glue is necessary Include: Starships - 5 parts Booster 7 - 10 parts Pad - 5 part Mechazilla - 89 parts Pins needed - 3x 5mm pin 12x pillar pin 8x 10mm pin
This gauge shows the range of a spell and the area of effect in a cone. All targets that fall within the designated range are affected by the spell. Also excellent for showing a range of sight.
Prototype of a variable-area nozzle for use on EDF RC airplanes. More info about the original build can be found here: https://imgur.com/a/Njsps6G . Keep in mind this is a prototype meant for testing the basic design, and as such it lacks…
Humorous restricted area sign modified from @HishamMerzeh_313087 's trefoil sign.
Skadis compatible panel. Dimensions: 240 mm Wide x 120 mm High x 5 mm Thick. Other panel sizes available at https://www.printables.com/@HighDesertHacker/collections/2757420 Key features: Panels can be joined together to create a larger…
danger restricted area sign Category: Signs & Logos
Remix of @ChrisAeroEngineering great stackable box with a flat surface on one side for e.g. some sticky notes.
This is a work in progress, but hosting the portion i've done so far. I've made the base structure have quite thin structural pieces so you should hopefully not use infill but just perimiters which will make the print speed much faster.…
Hey! These are my homemade splash guards (mud flaps) for the door sills of the Jaecoo J7. You know how after rain or on a dirty road, all the spray gets thrown right onto the door sills and lower panels? My J7 suffered from this…
A model of a stage used for plays. Made for a Grade 9 English project related to Twelfth Night; a play by William Shakespeare. Was originally used to create a 3D maquette of one of the scenes in the play using LEGO characters and an MP3…
I took on the challenge to create the most surface area possible in a bio ball while also keeping a design that would let you print without supports: I came up with this design, and while it may not be the most mathematically possible, it…
-Kiki mama. (Im replacing FanBlox for this one, print in PETG with Tree supports.) NGL this was not hard at all. Just ate slashers head and gave it CI's mask. SOB
My friends and I started playing Dnd on Fridays in the office. Than I made convenient devices for determining the distance while playing Dungeons and Dragons. 1 division = 1 inch, so will work for most cards with similar cell sizes. Print…
This clip is commonly lost when servicing a Mach-E, resulting in a loose upper cover inside the front cargo area. Modeled a substitute for part # W720957-S300. Exact geometry may need to be tweaked to ensure just enough hold. Print on…
This clip can be used to hold down items that are 3-5mm thick in the work area of the XTool F1. It uses the AL thumbscrews included with the laser or you can buy new screws to use these clips… Note: > You can print this clip in any…
Edit: 30Oct20 - Found a great monitor/screen for this MFD (since it's bigger than the TM Cougar MFD's) cheap and minimum wasted viewing area https://www.aliexpress.com/item/32325920866.html?spm=a2g0s.9042311.0.0.5c074c4dyytB9m Edited:…
This Hemera mount is compatible with the Prusa MK3s X-Carriage. A lot of mods require a "downgrade" to MK3. You will need to reverse two of the screws that connect the X-carriage and the Hemera mount. Use the modded fan shroud and PINDA…
This model is based on my previous design of Spice jar gadget. If you can't use my original design because of any Jetboil accessories or in case that you pack your stove system assembled. Take a look at this version. This time I focused…
Self-draining sponge area; This model is designed for ledge sinks. Flow area is 10mm above the ground and extends 20mm towards the front and so the water can be drained directly into your sink. Printed with support.
Ich benötigte Platz in der Gartenhütte und habe die Makita Akkuheckenschere DUH523 am Dach der Hütte befestigt. / I needed space in my garden shed and attached the Makita battery hedge trimmer DUH523 under the roof. Durchsuche Onshape…
This model is designed for small area flow rate calibrations. The top layer will have solid infill in length starting from slightly less than 0.2mm to slightly less than 10mm. I picked those lengths because those are the ones worked the…
After couple of spice jar holders this time I share two very simple circular boxes. They fit into area of Fluxring - one inside, second under. Then you can maximally use this space
AREA 51 sign. Choose your favorite UFO version, referring yourself to the illustrations, then print it with a color change and enjoy !
For the 20-foot radius, print without a skirt to ensure it fits.
It is the same great Monopoly Player Tray / Organizer by BuildX but the left tray for the properties cards is wider for the new wider properties cards.
A simple hexagonal tray, designed around the Mini's build volume and a 200x200mm sheet of stick-on felt. The straightforward shape makes padding the inside easy, though some creativity may be required for marking the lines to cut. It is…
I made this for my DM. I wanted something a little bit sturdier than one of the vase mode designs, and in a single piece, so that it was easier for her to transport. Cone and Cube templates are available too. 10ft, 15ft, 20ft, 30ft, &…
Infinite Area Is A Cube with Things Inside of it. There Are Multiple. They Are Little Tests To test the 3d printer. i do not recommend "infinite-area_4.stl" because it has the biggest file size and it was lagging the website i made it on.…
Simples but efficient support for headset with base which you could be include cellphone charge induction (Magic Safe). This model has two separate parts: base and stem for easy printing. No supports are required and can be produced in…
alien skull from Area 51
TinyMtn Custom Pack 1 - Pikes Peak Area This is a package with a 3D model file of Pikes Peak and the area to the South, including Cripple Creek, Colorado, USA. Model scale is 1:250000 Model measures 4.1" x 3.1" x 0.46" (10.4 x 8 x 1.17…
Model of the area used by the printer (K2 Plus) to calibrate the printing process. Can be removed again after aligning the model to be printed.
This model is compatible with the lego system.
These two models greatly improve the play experience of Splendor Duel; particularly when playing on a smaller table. Due to the slot in the nobles tray for the gameboard, you must print with support. The card tray fits cards sleeved with…
As far as I am aware, there are two Sortimo L-Boxxes for inset boxes. One is the i-BOXX 72 and the other is the L-BOXX 102. I was looking for some small boxes, but none of the models I found were suitable. Therefore, I created this model.…
Review Add Flame Area -3 and 5 inch combined area template for The Old World
I made this for my DM. I wanted something a little bit sturdier than one of the vase mode designs, and in a single piece, so that it was easier for her to transport. Circle and Cube templates are available too. 10ft, 15ft, 20ft, 30ft, &…
Remix of Pythagoras Theorem Proof My slicer sliced the original file as one sold block so I Increased the gaps and exported the blocks as individual components. Added a .3mf file - a PrusaSlicer project where all the blocks are situated…
DANGER - XENOMORPH IN AREA, sign Category: Signs & Logos
A practical set of 3D-printable terrain area footprints, designed to clearly define terrain boundaries during play while staying easy to store, transport, and deploy on the tabletop. The shapes are inspired by the official terrain…
This is my knock off of Area51's excellent filament guide clip so all thanks/credit goes to that person. It's probably the second thing I ever did in Fusion 360 and was as much an exercise as anything else. I literally just redrew…
Aditional Area for Table vise 43D PRINT Good for one-handed people. Dissassembly video: Screws: M5x45mm DIN 7985 Print settings Layer 0,3mm 4walls no support infill 20% Table vise is link here
A straightforward two-colour restricted area sign. Plasticity and Step files are included for easy modification. [UPDATE] Added a three colour and four colour version. Print Settings: At the default scale and 0.2mm layers you will want to…
Small parts bin with a label area for Harbor Freight organizer. Works with 20 Bin Medium Portable Parts Storage Case (Updated to have a taller version based on feedback)
.4mm nozzle with at least 10% infill. Enjoy!
Print the gcode files and then rearrange the pieces in the included display tray to make 1^2 unit of area disappear or reappear at will.
I have slightly extended the original version from moWerk to increase the contact surface for double-sided tape. Thank you for that great modell! contact surface is now 2 cm. Update: There is now a shorter Version too. My problem was,…
I made this for my DM. I wanted something a little bit sturdier than one of the vase mode designs, and in a single piece, so that it was easier for her to transport. Circle and Cone templates are available too. 10ft, 15ft, 20ft, 30ft, &…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon inspired, Mareanie , Tabletop DnD miniature with or without 25mm medium base which can be used for DnD and…
This is a guide that for me places either the standard AutoTrickler Shot Glass or the AREA419 Powder Cup in the correct location. All that needs to be done to switch is to spin the plate around. Print Settings Printer Brand: Creality…
Vivienda unifamiliar (Proyecto y obra de 2006) a escala 1:100. Los ficheros STL están a esa escala, aunque yo los he reducido un 10% al imprimir en mi Prusa I3 Hephestos. Tiene algunos fallos de concepto, fruto de la inexperiencia, pero…
This simple outline tool helps you measuring the area clearances in H0 scale according to NEM 102 (and NEM 201 with catenaries). The design can be found on Onshape, so you can customize it to your needs. -- Einfache Schablone zum Abmessen…
Designed for < 30 mm thick tabletop. The thick version is for < 40 mm thick tabletop. Pros compared to other models: Distinct under-desk desk design to save space large contacting area to reduce marks on the headband
Rear loading area for TRX6 https://www.printables.com/social/268053-bedabedrich/prints Print Settings Printer Brand: Creality Printer: CR-10 MAX Rafts: No Supports: No Resolution: 0,2 Infill: 20% Filament: nebula PLA Category: R/C Vehicles
This model mounts in the small passenger side bed cubby box to keep things from falling out. Mounts using the two existing holes and two additional holes you mark and drill. I just used random screws i found, shown in picture. I have…
cudaman uploaded this but did not have the original file, only a gcode file. I ran the gcode through a gcode to stl converter and then imported that into Fusion and recreated and tweaked it. I have included both the stl and the f3d file…
Ich habe für unseren Kühlschrank mehrere Boxen benötigt, die aber auch einen Abtropfbereich haben. Eignet sich sehr gut für Obst und Gemüse. Der Abtropfbereich kann optional gedruckt werden. Die Box selbst ist aber nicht spektakulär ;-) I…
This is a paperclip with space at the top to write something. Printed with Monoprice PLA Plus+ at 0.10mm precision on a Prusa Mini.
Here is a lasercutter, I designed to cut and engrave some plywood, leather, cardboard and other materials. You will also need some 40x20 profiles, 3 stepper-motors with drivers, a lot ob GT2 belts, pulleys an rollers (all seen in the…
Usually these taps have a bad water jet, in the garage i needed to use this tap to wash my hands, i created this insert to be able to fix a normal home areator into this outdoor tap.
Tisk otvorem na podložce
To address the dim cargo lighting in my 2020 Subaru Outback, I created custom panels to replace the side and hatch trim access panels in the cargo area. These panels house LEDs, significantly improving visibility at night, especially when…
The STL is a to scale model of the BBL P1S build plate. The SVG or PNG can be used as a background image or just a sanity check that a print will fit into the actual printable area of the P1 X1 build plate. The SVG or PNG may need…
I made area markers for Ankh, my all-time favorite board game. Category: Toy & Game Accessories
I designed this Turtle Basking Area piece that fits on an Ender 3 bed (235x235mm). You have to print two copies. After that it hold on to the glass very tight so you don't need to glue the parts. The upper part is cut for 3mm acrylic…
CAUTION - BIGFEET BREEDING AREA, AVOID EYE CONTACT, DO NOT USE CAMERA FLASH, SIGN CAUTION - BIGFOOT BREEDING AREA, AVOID EYE CONTACT, DO NOT USE CAMERA FLASH, SIGN I added both variations for whatever the preferred plural might be.…
This is a roof for the loading area of the Schleich pickup truck. I designed it and printed it with 20 % infill with PLA+. For printing turn it around and place it on the roof. Shout out to @SebastianDruckt ! I needed a door for this car…
I designed and printed this large surface area, clip-on, exhale filter holder for my 3M 6200 half face respirator. This allows me to use half a surgical mask to filter the air I breath out of the mask in order to protect others while I'm…
I wanted to use the Evenflo Versatile Play Space Adjustable Play Area while opened and attached to the wall to get more space from it. I made these wall anchors so that the ends of the gate can attach to the wall. I printed in PETG and…
A sectional scale model of all of the B, C and D airspace around Detroit Metro Airport! Vertical scaling is 1in = 10,000ft. Keeping the same scaling would make the whole model less than 1/8in thick. Great for explaining airspace to…
Dimensions 158 x 114 x 4 mm Printed at 0.2mm layer height on my BambuLab P1P using PolyTerra Cotton White Matte PLA PolyTerra Sapphire Blue Matte PLA PolyTerra Charcoal Black Matte PLA Bambu Textured PEO build plate This "Keep This Area…
The original had 15 separate hex tiles of water (plus the jigsaw base) for the Catan board border. I painstakingly merged the borders and dock models to form the border pieces similar to the base game. There are 6 pieces, with docks…
Useful sign to raise a warning to people that they enter in your strange area with abnormal phenomenons. Don't panic and don't forget to feed the fish ;-) Découvrez mes autres créations: https://www.facebook.com/CR3Design Find my others…
layer 0.2, first layer 0.2 at a height of 1 mm (layer 5) pause or change the material to another color. I used a combination of yellow in the background and blue for the information graphics/text It is of course possible to change the…
This is a simple 2 piece model of the thaad interceptor missile. this model is based solely on this drawing i found on Wikipedia: https://commons.wikimedia.org/wiki/File:Wfm_thaad_diagram.svg
Skadis compatible panel. Dimensions: 240 mm Wide x 160 mm High x 5 mm Thick. See other panels at https://www.printables.com/@HighDesertHacker/collections/2757420 Key features: Panels can be joined together to create a larger area,…
Created a ski area boundary sign using tinkercad. Text was created using inkscape and skier was downloaded from freepik.com and converted to svg using tinkercad. Two versions uploaded, one as a single file, and one with three separate…
A shrunk version of the original so it fits inside the barrel!
These 10/20/30 ft diameter AoE markers are designed to fit into eachother for easier storage. They are meant for 25mm/1in grids. They might need some filing down, depending on your printer.
This mask, like many others, is designed as a fall-back to proper medical equipment in case of shortage. Features: Prints in less than 6 hours No supports needed Thin enough walls so that it can be cut with scissors and adjusted to fit…
100x160mm signs, with variants for a dragon, skull and crossed bones, and camprife art. Best with color switch above 1mm, as with included gcode file. Also see the Shadowbox Frame , into which this and the rest of my sign collection fit.
This is the complete scan of a Suzuki Samurai floor, internal bed sides, bed rails, trans tunnel and door jams. Hinges for the doors are included on the passenger side should you want to make tube half doors or something. The tub still…
