Baphomet Statue - Easy to Print Luciferian Diety Freemasonry
Found this awesome print at: https://www.thingiverse.com/thing:5008465 Nothing to it but to do it.
- Pobrania
- 990
- Polubienia
- 112
- Ocena
- 5
1883 modeli
Found this awesome print at: https://www.thingiverse.com/thing:5008465 Nothing to it but to do it.
This print is a threaded to be a standard mason jar lid. Just put some bait in the jar and the pests fly in and are unable to find their way out. Has a convenient spot to hang the trap should you want to. I suggest not using sweet bait as…
Wydruk około 3,18 €–3,89 € nettoWstępna wycena jednego wariantu
Took the base of the Nutella Candy Dispenser from Sui77 and removed the threads, I then added new threads and raised them up to fit a regular mouth mason jar. I have also added a wide mouth version. 0.2mm layer height, 20%infill, 2 walls.…
Ever want to get into hydroponics (growing plants in water), but only had a bunch of mason jars? Well, if so, here's a solution for you. Get your own hydroponics garden in under half an hour! Assembly/Usage: Replace inner portion of mason…
Wydruk około 0,47 €–0,57 € nettoWstępna wycena jednego wariantu
Źródło oznaczyło ten model jako treść 18+.
Wydruk około 2,04 €–2,49 € nettoWstępna wycena jednego wariantu
So you have to pop out the medallions out of the print then; you have to glue the blank medallions I have created. like always follow i will follow you back ,and enjoy!
Wydruk około 4,13 €–5,04 € nettoWstępna wycena jednego wariantu
This is a model of the (rebuilt) Hazbin Hotel from Season Two of Hazbin Hotel. It has a lot of detail. I tried my best to recreate it faithfully, but this building can be a bit of an optical illusion at times. I also couldn't find any…
Wydruk około 5,40 €–6,60 € nettoWstępna wycena jednego wariantu
Mason's button
Wydruk około 0,13 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
hc-sr04 sensor compatible with an arduino It's easy to attach the model to a contruction with bolt and nut or screws. No specefic printing instruction needed.
This is a mounting bracket that holds a JSN-SR04T ultrasonic sensor and waterproof DS18B20 temperature sensor for mounting to a 1" square tube. This is part of a project to measure the water level of a creek. The sensor will be extended…
Main Print Page Color sequence: Primary Color Pink (Sprint) Green (Summer) Brown (Autumn) Blue (Winter)
Wydruk około 15,46 €–18,89 € nettoWstępna wycena jednego wariantu
Two simple cases for the Panasonic Lumix Battery Pack (DMW-BLG-10E). V1 is a simple rectangular slide in/slide out style cover that relies on friction to keep the battery secure. V2 has an integrated clip that will hold the battery in but…
Wydruk około 0,43 €–0,52 € nettoWstępna wycena jednego wariantu
Print in place caddy for holding four pint mason jars. There is a version for both standard lid size and wide mouth size. The neck of the pickup ring slides down between the jars so that another caddy can easily be stacked on top. I use…
Wydrukowałem pionowo z podporami
This is a hands free funnel. The flange sets on top of jar rim. Works on large and small mouth jars. works great when pouring liquids into jar, sometimes you need two hands to get product to the jar.
Pouzdro na Ultrasonický senzor Věci, které budete potřebovat: Ultrasonický senzor Servomotor s pákami Led pásek 16 gramů pla filamentu Kroky na složení pouzdra: Krok 1: Stáhněte a vytiskněte si na 3d tiskárně tyto části. Krok 2: Po…
Wydruk około 1,32 €–1,61 € nettoWstępna wycena jednego wariantu
Deckeleinsatz für Spaghetti-Eisbecher von Edeka, Aldi oder Lidl. Senkt den Verbrauch von Reiniger bei kleinen Teilen. Das Gerät mit Wasser wie gewohnt auffüllen und dann die Reinigungsmischung nur in den Becher füllen. Für Vevor JPS-10A…
Wydruk około 3,19 €–3,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Description A model to replace the outer casing of the Panasonic RP-HJE125E earphones to allow for sleeping on the side with them on. It's not perfect and therefore not final. I'd like to eventually make it smaller still. This mod, of…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Halterung, um die Panasonic Munddusche ohne zu bohren mit Silikon an einer Fliese zu befestigen.
Wydruk około 2,87 €–3,50 € nettoWstępna wycena jednego wariantu
Compatible for the southern hemisphere only. For the northern-hemisphere version, check here for the correct parts: Print Friendly Curved Analemma Vertical Plate for 3DMason Heliochronometers by 3DMason | Download free STL model |…
I share how I made the frame and the magnets in this video: I cut the candy cane models into white and red sections so that I could print the white and red pieces separately and then glued them together with super glue. This is tricky so…
Wydruk około 1,66 €–2,02 € nettoWstępna wycena jednego wariantu
News 2024-03-17: My newest whistle design, a Long Range Dog Whistle at 7,000 Hz . Please download here . WARNING: This is a dog whistle and not a toy! It's very loud which can harm the ears, so please protect your ears and don't use it…
UPDATE: If you are printing with Silk PLA or have issues with the pin breaking during assembly please use the "flat pin" file for a stronger print orientation. UPDATE: License changed to allow commercial use, please credit my design if…
A helpful lid that you can screw onto a standard mason jar to create the perfect fruit fly trap. Put a bit of liquid bait inside (just about 5 mm deep), and place where it's needed. There are many commercial fruit fly liquid baits…
News 2024-03-17: My newest whistle design, a Long Range Dog Whistle at 7,000 Hz . Please download here . News 2024-01-21: I designed an ultrasonic dog whistle with an even higher pitch of 23 kHz , which you can download here . After a lot…
News 2024-03-17: My newest whistle design, a Long Range Dog Whistle at 7,000 Hz . Please download here . News 2024-01-21: I designed an ultrasonic dog whistle with an even higher pitch of 23 kHz , which you can download here . WARNING:…
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop Easy to print and Assemble Mason Jar Candy Despenser. Only two parts to print, prints with or without supports. Uses one M4x20mm (or similar) screw to attach the knob. Sized…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
JASON, never die! Rafts: NO Supports: Yes - TREESUPPORT in Cura oder Custom Supports Nozzle: 0.4 Resolution: 0.16 - 0.28 Infill: 10% Walls: 2 Die Streifen für die Maske mit Haarföhn oder Feuerzeug vorsichtig erwärmen, und mit Kleber an…
Print settings (example) Raft or Brim: None Supports: No Layer height: 0.2 mm Infill: 100 % Screw hole is 4mm diameter.
Found these really cool Pepakura files and thought they would make another great addition to the files here on Thingyverse, Cheers Jace
Hi Everyone! We are LEAF1 - an F1 in schools team who were crowned 2024 UK Champions, and competed at the world finals in Saudi Arabia, where we placed 5th. This account is run by the lead engineer - Zac. It's part of our open-source…
This should fit any wide mouth canning jar. If printed well, and well tightened, these lids are almost watertight (actually, they form a tighter seal than the commercially sold counterparts but not air tight. These are suitable for use in…
News 2024-03-17: My newest whistle design, a Long Range Dog Whistle at 7,000 Hz . Please download here . News 2024-01-21: I designed an ultrasonic dog whistle with an even higher pitch of 23 kHz , which you can download here . WARNING:…
I found the original difficult to print as the logo was protruding so it could not be printed with the top of the lid face down. I wasn't particularly bothered about the design so I removed it. There is also an alternative design which is…
Updated 05/18/2022 Added new 79x1 (in three fits) to support season 2 minatures Added new labels for Season 2 Updated Instructions for Season 2 Updated 03/28/2022 Added new medium fit files (see “Optimizing Fit” section below) Updated…
Both lid and body are the same size. This is so that it can be printed with any extrusion width size. In order for the lid to fit properly, it has to be scaled with a formula. Follow these steps: Determine the desired scale. 100% is about…
Mason jar lid organizers Provided in STL, SLDPRT, and STEP formats and have provided the Onshape link for edting as well. Made to function like this: Amazon.com: AIEVE Mason Jar Lid Organizer, 4 Pack Mason Jar Lid Storage, Canning Lid…
I've caught a lot of mice with my earlier version of this trap, designed for Adam's peanut butter jars. (We eat a lot of peanut butter.) I've even caught two mice at the same time. This version is designed for standard 32oz (or standard 1…
Attach this to the top of any standard mason jar, and then enjoy sliding multiple coins down the ramp - watching as they accelerate towards the apex of the vortex. Printing Notes: This is an easy print that requires no supports. The STLs…
Currently refining a small obstacle avoiding mecanum robot for an introductory robotics club and needed a simple mount for a servo driven ultrasonic sensor. This design is a single piece print with no supports that printed quickly in PLA+…
2 x 2 organizer for mason (Ball) jar lids, both standard and small. Half-size version is 1 x 1.
Something I've always wanted to wear during halloween. Friday the 13th The movie Halloween was classic horror with a stunning Jamie Lee Curtis. Micheal Myers is another mask I'd like to have a go at too This is an untested print but looks…
Earlier this year I got into growing sprouts. While living in my dorm room at college, I wanted a more convenient way to strain the water from the mason jar and came up with this print. It's a meshed strainer lid for wide mouth or regular…
Just added the smile like on the original design https://www.thingiverse.com/thing:1364024 :-) Fits perfectly Ultrasonic HC-SR04 sensor and standard servo mount Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution: 0.2…
This is NOT a remix of an amazing Jasoncanning case: https://www.thingiverse.com/thing:2578431 since I did not use any original files just the picture as reference. This is complete rework with slight changes. The case is printed in place…
Here is the model for Jason Bear. Jason is a good but scary Friend of Barry, and like his friend he seems to just want to be your friend (but i would keep an eye on him), do you have space for Jason? maybe he can keep Barry Company. I…
Green Onion Mason Jar Station! tired of buying and buying? time to start growing instead! simply chop the bases off the onions and stick them inside a jar of water (with nutrients). they dont need much light and are very hardy. made for…
Threads for a standard mason jar lid, built in Fusion 360, fully parametrized, for use in other designs. I couldn't find a fusion360 source file to use in other designs, so i built this to share. It's largely based on the thread pitch in…
Ultrasonic Sensor Holder for arduino
My wife recently got a Jeep Willis, and now she's on the Ducks in the Jeep train… So I thought I would make a few custom ducks for here. Here is one of the first ones to come out. Jason Voorhees Duck. Every day can be Friday the 13th! I…
A stronger wide-mouth mason lid jar lid than I was able to find. Print Settings Printer: Qidi X-One 2 Rafts: No Supports: Yes Resolution: .016 Infill: 100 Filament: IIID PLA Grey Category: Kitchen & Dining
This keeps baby chicks from spilling their feed all over the place and uses a mason jar. I chose to print in PETG for longevity but be aware the big overhang section is 64 degrees so you will need to either use low layer height or…
This is a screw on lid that turns your standard mouth mason Jars in into a bird feeder. The hanger was made with bailer twine that happened to match my filament color. Forgive the macramé job, I was winging it. Updated: I would suggest…
Requires: Wide Mouth Canning Jar (Mason Jar) with Lid Ring M4 x 20mm If you print the Back Hidden Screw file make sure you glue the front on first. Then put the knob on with the screw. Then glue that back. 04.21.2024 update. Added a new…
UPDATE: For your convenience I have now added pre-coloured .3mf files at a whopping 520% scale, you'll need to add supports yourself and you can down-scale in slicer if you wish. 😁 ( I have not included the Base ). This was done for the…
Lego brick generator tool - for simple 2x1 or 4x1 bricks with brick pattern side. Very useful for architectural builds, castle walls etc. The pattern is on both sides and it is reccesed into the brick wall so it can be stacked side by…
If you're like us, you have dozens of Mason jar lids and rings floating around. These holders will keep them under control. The set includes a ring holder and a lid holder for both the small and large mouth Mason lids. Category: Kitchen &…
this butterfly knife that looks like a banana only requires 3 separate prints that clip together with ease.
Circuit de Spa Francorchamps, Stavelot, Belgium, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed…
My lids for my Mason Jars got a bit of rust which is why i made some myself. Works for the 86mm wide mouth versions. No supports needed. ----------------------EDIT-------------------- As per @WackoPrints_268317 's hint I changed the…
A simple Seasoning Condiment organizer Inside space : 135mm witdh x 50mm length (x 70mm height) (5.31" x 1.97" x 2.75") No supports needed ! For exemple each caddy can hold 4 to 6 bags: Knorr 28 to 36 gr 129mm(5.08") width Maggi 26 to 40…
Let your kids explore the world of construction with this fun and realistic Sand Mason Toy Set ! This 3-piece set is perfect for building detailed sand structures at the beach or in the sandbox. It includes: 🧱 Brick Mold – a block-shaped…
This is the case for HC-SR04 ultrasonic sensor (RED VERSION). The blue one has diffrent dimensions and is not compatible with this case. Print Settings Rafts: No Supports: No Filament: Doesn't matter Category: DIY
Printed in pieces on the Prusa Mini+ in Hatchbox Grey PLA. I will need to do some post processing to fill a few little gaps. but all together, beautiful model and such cool details.
This is a waterer for young chickens, quail, turkeys, etc. It uses a regular mouth canning jar. The Aldi's spaghetti sauce has a mason jar top, so they work perfectly. It is shallow and narrow to keep the chicks from walking in it.…
To make the trap you just print the lid and fill the jar with sugar water and yeast. The fermentation will generate CO2 which attracts the mosquitos they fly in the cone and get trapped. Turns out it attracts other pests like bald faced…
Completely built from scratch based on the original parts, as I had found the ones available don't quite perfectly fitted on my Q. I included the Tray as seperate parts, as well as a full version - you obviously only need one.…
Hummingbird feeder that attaches to a mason jar (standard lid, not wide mouth). Used @IanFoulds Mason Jar Ring for the threads and his awesome bird (seed) feeder as inspiration (see referenced models). Pictured feeder utilizes…
Andor / Mandalorian s3 version of the DC15S carbine as seen in the flashbacks with clone troopers. I did my best to make it as accurate as possible given the limited reference material available at the time of uploading. This blaster…
Circuit de Monaco, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different color fillament.…
Split so you can do different colors. Use the New Longer Knob for Multicolor. The New Knob with Color Arrows is the shorted one for the original base print. 04.21.2024 update. Added a new Knob with different tolerances for the arrows. If…
I've added some extras where you could just wear the main part of the mask as is or make a static model and or perhaps inlcude the eyes and hollowed brain as a possible wearable concept too ; ) Cheers Jace
Fits standard USA Mason Jar (Canning Jar) Wide Mouth jar (Large) and Small Mouth jar (Small) No supports needed. You will need to flip the model over to put the top side down on the build plate. The “Ring” is designed to put a standard…
This project requires just a few household items along with these printed parts to make your own, fully functional, candy machine. Required Tools: Hot Glue Gun Side Cutters and Utility Knife(for cleaning up prints) Required Materials: Pen…
Gregory's pet frog is a character who appears in Over the Garden Wall. https://www.instagram.com/kuleshow/ 👈✅ Hands can be printed separately.
Remix of "Ultrasonic Sensor Housing" by Ivanchew to fit an RCW-0001 sensor instead of the original SR-04 sensor. If you don't know, the RCW-0001 is a 3.3V ultrasonic sensor which is ideal to use with an ESP8266 :) Onshape model can be…
Template is in STL and STEP file formats for easy modification. This is a great way to design your own lid.
This is a homage to my favorit scenes from Rick and Morty Season 1 Episode 1. More to come... https://cults3d.com/en/users/OneIdMONstr/creations Print in 50% for Elegoo Mars. Category: Sculptures
The perfect set-and-forget planter for people living with cats or other plant-munching beings. My sister sent me a Tik Tok video of someone who was selling a similar 3d printed double mason jar planter and told me she wanted one, as she…
A minimalist yet cute reindeer ornament, which is inspired by the class Band Saw Reindeer by Nick Engler. Because I didn't have a band saw, I designed a 3D printable version similar to the original, but with some slight adjustments for…
Mason jar lid with straw hole
Print with 20% infill After printing, the case is ready to slide onto the transmitter and receiver on the HC-SR04.
Vertical card storage for character and villain cards for Season 1 and Season 2. Note: If you want a solution for storing your minatures see my other model: Marvel United Miniature Storage Card sleeves These trays have a 67.5mm wide card…
Plant Propagation Lid for Mason Jar. Fits half-pint mason jars and aids in plant propagation by holding your plant cuttings so while they grow roots in water.
Overview Make mommy proud, Jason, don't let them escape! This figure stands about 100mm tall and is split up into parts to accommodate a 4 color multicolor system for your convenience. This is an Orca project file, and will likely only…
This is a remix of the original model from Carl Belcher Link below… THANK YOU. Note: the back had my name ( the model uploaded here is plain, you can customize it with your name ) Here’s a Quick Video showing the print and how to fit it…
This is the new chapter 5 season two medallions
A perfect and easy pumpkin to start the Halloween season! !! NOT for use with open flame, fire, or candles !! Only use with battery operated lights
This mason jar lid holder was made as a gift for my sister. It has holes at the back for easy cleaning and a little depression on the front of the lid holders to help pick up the last lid. It's quite a large model at 225 x 241 x 121mm.…
WORK IN PROGRESS - MORE DETAILS TO COME IN THE FOLLOWING DAYS Hi! We are LEAF1, an F1 in schools team from Canterbury, England, with a focus on remaining both Sustainable, and Open Source as we compete within the competition. F1 in…
Ornament to remind us of our fraternity, and obligations
A new 3D figurine generated by AI, a Chibi Jason Voorhees. I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the…
I just flattened the foot and added a groove for a servo mount instead at the bottom. A great tutorial on how to make a arduino radar can be found here: http://howtomechatronics.com/projects/arduino-radar-project/ Category: Engineering
No Supports! Added more holes and increased size. Also added center cone to improve results.
This should fit any standard canning jar. If printed well, and well tightened, these lids are almost water tight (actually, they form a tighter seal than the commercially sold counterparts linked above), but not air tight. These are…
MK Jason Inspired Mask Enjoy Category: 3D Printing
This is the new and improved version of my previous mason jar lids that I made. This version needs NO supports, and it uses silicon seals that I bought off of amazon. Please reach out to me if you have any question and enjoy the print!…