1047 modeli
Hinge for the Audio-Technica ATH-M40x. I tried out the version from thingiverse ( https://www.thingiverse.com/thing:2823187 ), but I thought it didn't fit well so I recreated one myself. I think it works well! Made a left and right version.
About I love 19 inch rack gear and I try and rackmount everything I can in my audio and home tech setup. Cutting aluminum beams isn't always an option so I thought I would make a custom setup for my electronics workbench to tidy up the…
The housing was made for the AI-Thinker ESP32 Audio Kit V2.2 A405 (but should fit for the other variants of the V2.2 kit too). SD slot, USB connectors, audio jacks, both MICs, the LEDs and all pushbuttons are accessible. The RESET and…
Minimalistic replacement for the tiny piece of plastic that holds each earcup of Audio Technica ATH-M50X headphones in place. Note: it's more rigid than the original solution, so headphones are not going to fold as nicely anymore. What…
Audio cassette box. (Obal na běžnou audiokazetu.) Print instructions =EN======== Audio cassette box. Like the original box. Used thicker walls for better coherence. If you want an original size, print 99% size. I think, nozzle 0.4 is…
This is remix of Stamos fantastic Hifiberry Case . The original model was modified as follows dimensions were adjusted to IQaudio DAC Pro High-Fidelity-Audio-Output-HAT the case was extended in height to allow using the GPIO pins a hole…
I made a mini case to this Bluetooth Audio Receiver: https://www.aliexpress.com/item/1005002231624213.html
These are footswitch topper for your Fractal Audio Modeller. They provide a tight fit and make it much more convenient to use your device barefoot or to switch presets with your hands. ---- Did you like my print? If yes please rate it ❤️…
Designed a 3D model of the ATH-M40x/50x Earcups in Fusion 360 to be printed and allows you to customize your headphones. In my design, I have removed the locking mechanism for the 2.5mm cable as the cable holds very tightly even without…
Printed with PLA at 0.20 no problems. Print it right side up, as printing on face results in a bad finish in the tape groove.
you can do the rigging with 1.75mm filament. check "extra perimeters on overhangs" if you want to print without supports. d&b is a german audio equipment manufacturer.
I designed a low profile mic stand for the Audio Technica AT2020 microphone which can easily be placed somewhere else when not in use. This was specifically made for the Ikea Bekant desk, with a thickness of 17mm. The STEP file for the…
I got tired of fingerprints on the cover for my AT-LP3 record player so made this super simple finger lifter for it. Steps: Print it Cut a small piece of paper (20mm x 19mm) Fold the paper over where you want the lifter on the lid Push…
3 versions du support : Simple Avec attaches câble et encoches format USB type C Avec attaches câble et encoches format USB type C bicolor 2 coussins différents. Le coussin est à imprimer en FLEX/TPU/TPE de préférence Le mors de la vis de…
PETG was used since this will be exposed to the weather. No supports are needed, and a color change is included in the .gcode file. The FreeCAD 1.1 file is included if other fonts or wording changes are desired.
Hi, this is a powerbank-holder for the HTC Deluxe Audio Strap (DAS) & Anker 533 PowerCore PD30W Powerbank. Designed to sit on the top portion of the DAS in order to be able to lean back in a chair without a powerbank sticking out. Perfect…
Made specifically for Polk Audio DB 842 DVC, which has a 96.5 mm top mounting depth and a 196 mm diameter octagon screw pattern. The Polk sub is a great step up from the factory subwoofer without amp upgrade (my Civic comes with a 540W…
A tool for audio and video service technicians. The diameter of the straps can be measured from 1cm to 13cm.
Hallo, mein erstes Modell (über FreeCAD) hier. Es ist entstanden aus der Notwendigkeit heraus, nach einem unglücklichen Zwischenfall, einen der seitlichen Griffe vom ION Audio Block Rocker M5 Bluetooth zu reparieren. Zumindest schien mir…
Simple Audioengine 2+ speaker stand with integrated cable channel to hide the cables. Printing instructions: 0.3 draft profile used Textured sheet used Organic supports activated No brim required Fuzzy skin activated Lightning infill set…
Stand for the speakers of an HK Audi Lucas Nano system.
The best way to mount up to 2 URX-P40 Sony audio receivers both facing the cameraman, very useful to monitor the battery and audio levels.
Other than in the remixed model, you don't need thread inserts; the included screws fit into the holes. Make sure not to overtighten them.
The Douk Audio U10 Mini Tube Headphone Amplifier comes with a perspex shield which I don't like. So I made this instead which when printed in eSUN Copper PLA+ I think looks better.
Présentation du modèle Cette sculpture inspirée du style emblématique d’APEX a été entièrement conçue et fabriquée par mes soins. Elle reprend la forme triangulaire caractéristique, intégrée à une structure robuste avec un motif en nid…
As seen on X and YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
Simple stylish protective case for the Legion Go with integrated audio redirectors. Recommend printing from PETG or PETG-CF, I did mine in PC-CF, avoid stiff plastic like ABS and ASA. Supports are needed at the bottom for the USB-C access…
Adapters to use a HTC Vive deluxe audio strap on a Meta Quest 3 headset. Curved version (1.5) should be very close in fitment. However if you have issues printing them and rather use the flat version you can aswell, heat them so they are…
This is an audio cassette organizer with a dispensing mechanism (tape delivery mechanism?) inspired by the ones in Kalmar Designs organizers. The inspiration to make it (and to make it modular) came from this great project on Thingiverse.…
(Update 1/26/2020) Added Amp and Speaker cases. Added a cover for LCD panel's bottom part. (Update 1/11/2020) Thickened walls slightly. This improves rigidness and also the modified back wall makes assembly easier. Summary This is a case…
Sound directing adapter For Lenovo Legion Go
This model is inspired by the Cambridge Audio Minx Mini12 Speaker box designs for a twin centre and single left and rights to utilise the Dayton Audio CE65W-8 Sub box designed for the Dayton TCP115-4 in a sealed configuration. The grills…
Protect and mount your AudioMoth (a full-spectrum acoustic datalogger) in style. The AudioMoth Vault v3 is a highly-water-resistant case designed for field usage, which you can make with about $3 in materials, in under 3 hours, on any 3D…
This is my first ever 3D design. Am open to constructive criticism I designed the manual winder from scratch myself with the exception of the “Crank Handle”. Credit must to to “adafruit” for his handle design.…
The walls are 13mm and i made the volume at recommended for a vented enclosure excluded the speaker. It's built with tongue and groove for easy and strong assembly. Use low viscosity glue. The TCP115 is a very good woofer for the money. I…
Model for the 15 Reception audio level control knobs on the Airbus A320 ACP. Not a perfect replica as the real knobs are illuminated when released out and have a collar that fits into the panel, but for me, close enough. Printed in matte…
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
Da mir der Sound von den SMAS Lautsprechern viel zu leise war habe ich mir diese Trichter konstruiert und gedruckt um mehr Lautstärke zu bekommen. Mit dem Audio Booster ist es ca. doppelt so laut Mit Ohrpolster ist das mindestens 3x so…
I was gift a pair of Audioengine A2+ desktop speakers. As good as they look, this speakers only sound good as desktop speakers when you sit in front of it and they are directed towards your head. Since no stand came with the boxes, I…
This is a small cable clip that can hold a standard 3.5 mm auxiliary cable, and help keep it tidy. It can be placed on a desk or can hang from the audio device depending on which end you loop twice through it. To use it, snap the cable…
I remixed the mount to fit perfectly to the Steinberg UR22C - Audio Interface
FR: Il peux porter des tailles de anse jusqu'à 45mm EN: It can carry bight sizes up to 45mm
While the Audio-Technica ATH-M40 is a great choice for closed headphones around $100, they have one major flaw. The hinge attaching the yoke to the headband isn't as robust as we would have liked. When the hinge on my original M40x broke,…
The official Bigscreen Beyond Audio Strap CAD model data! Useful for designing modifications or replacement parts, or for 3D printing accurate models. (Please remember to refer to your Bigscreen Beyond warranty as certain modifications…
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
Gridfinity compatible tape holder/organiser. 4 tape version is 2x3x2, 8 tape version is 4x3x2. You can fit this, loaded with cassettes, into IKEA ALEX drawers. Fair warning: I had some issues with warping when printing these, so a brim is…
Maturity Very Good 12 prototypes. In use since 2023/10. Model design from scratch. Hardware Hat spacers are 11mm height (as Adafruit quotes Nigel Tufnel's “These go to eleven”). The part “PiAndHatCase-rxx - Entretroise” is if you missing…
This is a remix of the one made by Sekazi. Its been modified to fit the quest 3. Ensure you print it standing up (default orientation of the model) with supports otherwise the clips will break. It is a bit of a squeeze to get it in place…
This is a kit I made to make the Vive DAS (Deluxe Audio Strap) useable with the Bigscreen Beyond Thank you @whinnyrab (RockyRob) for images and testing as I'm still waiting for my Beyond to be made. Thanks to @CompatibleVRC for helping me…
Stand for headphones 21 cm high. About 2.47 ounce. Printable in 1 piece with no overhang. Leave me a like! Support sur pied pour casque audio 21 cm de haut. Environ 70 grammes. Imprimable en 1 pièce sans surplomb. Laissez moi un like !
This is a a stand I built to elevate a small 12 channel audio mixer, Behringer 12 XENYX. If you print this using the stl files, you will need to create two sides with one mirrored. Don't worry about cleanup, the little bit of elephant…
This is a remake of the MattHub mount for the Bigscreen Beyond audio strap. The mount backplate is nearly identical to the one bundled with the hub, but my remake features 1.85mm holes instead of 2mm for a stronger fit with undersized…
I was asked to make some tags for charging cables for use by elementary school age kids. After not finding any that looked durable enough, I designed these to withstand heavy every day usage. There are several different sizes, use a…
Bmw reverse (rds\non-rds\bavaria\business) audio device side covers. OEM-number: 65 12 6 907 823 This device can be used on Bmw E30\E32\E34\E36. Reproduced with the example of original part. Perfectly fits and holds on its original place.…
Note: Support required! No AMS/MMU required! The different parts are printing separately, making the print accessible to everyone. A changelog is available at the end of the description to keep you updated on recent additions and…
READ BEFORE PRINTING! HIFI doesn't need to be expensive. I designed headphones that actually sounds good and balanced. Easy to drive. No powerful headphone amp needed. Designed to be printed with little supports. Only small supports…
Blanking plate for a single slot of a 500 series audio rack. Simple print back side down.
These simple stands hold my Audioengine desktop speakers up at an angle to improve the listening experience. Print instructions I printed these on their side with 0.20 mm layer height, 15% infill and automatic supports. You should only…
I made a Enclosure/Satellite speaker for Dayton Audio DMA80-8 3" Dual Magnet Aluminum Cone Full-Range Driver with Dayton Audio DMA80-PR 3" DMA Series Passive Radiator. The enclosure volume is made for vented to the spec. The walls is 8mm…
AIYIMA 2Pcs 2 Inch Portable Audio Speaker 4 Ohm 8 Ohm 10W Mini Full Range Sound Loudspeaker DIY Multimedia Speaker Home Theater https://www.aliexpress.com/item/1005005997167223.html?spm=a2g0o.order_list.o
These are 3D printable equivalents of the mounting plates used with Temple Audio's pedalboard. Using some mounting tape, you attach one (or more) of these to a guitar pedal. The mounting plate alignment nubs and center screw go through…
Le modèle original est déjà très bien, j'ai juste ajouté le nid d'abeille sur les faces pour l'esthétique et l'économie de matière. Merci au créateur pour sa création (Effectuer une symétrie de la partie droite pour la partie gauche du…
Pretty much summed it all up in the first part. To install, place the underside clip in first with a slight angle or the right side upwards ready to feed that in. I've added screenshots to show the difference.
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
A blind plug with an end plate to cover unused 3.5 mm audio jacks.
Wall mount for a Google Nest Audio. Very simple print, no supports required. I used Jessie's PETG with 0.20mm layer height, but anything should work. Instructions: It is easier to feed the plug through the hole before mounting it to the…
Howdy, This is my wall mount for a Google Nest Audio. I wanted to put it in the outside entertainment area away from the elements. It's simple enough and secures the speaker really well. The ring is a snug fit but isn't at all difficult…
A full size hard case/travel case for the teenage engineering op-1 with a replica op-1 layout on the top, includes a side panel to allow access to the headphone and charging ports while in the case and has the option to embed 5mm magnets.…
Made a dust cap/cover/plug for my desktop amp cuz I usually use it's RCA out at the back instead. Tryna prevent dust buildup and also perhaps slow down any oxidation on the contact Made one cuz I couldn't find one online. Available in f3d…
RCA connector dust cover. Stays on great but comes of easy with the little groove in the top. I printed 32 now for my home cinema set. :) Just a 10min print @ 0.15mm PETG and only uses 0,2 meters of filament. :)
Attaches to the nut on the top bolts for each pedal. These attach using the screws that come with the TT25. Print in the orientation they are saved in and use supports. Recommend you print with enough walls that the mount part for the…
I was wanting to maximize my desk space so I created this underdesk mount for a PreSonus Audiobox USB96.
This is a mount for a Behringer U-Phoria UM2 audio interface. didn't like how it took up desk space and also how it would get dusty after a while so designed a mount so that it can sit under the desk. uses 4 tiny screws (guitar screws…
General notes about the model This is an adapter for mounting a Dayton Audio TT-25 “puck” bass shaker to the back of Heusinkveld Ultimate Plus pedals. It should work on any of the pedals, but I only tried the accelerator and brake. The…
These mounts allow the Dayton Audio TT25 transducer (bass shakers) to be mounted to the Fanatec CSL pedals. There is a separate model for the accelerator and brake pedal. The mount is secured to the TT25 via M3x15 bolts and then the…
Got an old Mackie mixer to use as part of a video job. Of course it was missing a volume slider for one of the channels. Here is the replacement I created built from dimensions taken from one of the original sliders. After review of the…
(V2 beefed up the the parts some users said was weak an prone to breakage, and some minor rounding's of corners) Helps with the sound quality and volume a bit(and possibly some isolation), For a demo hover cupped your hand over your ear…
The audio jack on my PC is hard to reach so I made this extender which I mounted under my standing desk. It uses a cable strain relief boot that I printed in TPU, and I recommend using TPU for the cable boots. However, since TPU is still…
Support mural pour casque audio
Mount for the Fosi Audio TB10D amplifier https://www.amazon.com/dp/B08MJBG53V?psc=1&ref=ppx_yo2ov_dt_b_product_det I designed this up quickly to be able to mount these amps on the side of my sim rig to drive some bass transducers /…
fit parfaitement avec la manette , support stable et discret . offset d un scan 3D . impression via flsun v400 RAFT + SUPPORTS
Bluetooth Audio Receiver case for BLE Audio Receiver module with black PCB.
Update: Some models have been added and others removed. Not all of them have been physically test-printed by me yet, so I am taking some time to review, refine, and improve them gradually. I will be posting fixes, updates, and brand-new…
I've been working from home for over a year and felt my PC desktop audio system needed an upgrade. These full range speaker are based on the Dayton Audio RS100-4, 4 inch driver. I 3d printed the cabinet shown here in PLA and I've now…
Perfect for turning a tab-out cassette into a tab-in cassette for recording purposes. These tabs easily click in and click out and can be used over and over again.
Enclosure for 5 75mm x 9mm faders and an Arduino Pro Micro. Size is about 10x8cm. The bottom is held on with M2 screws. I use it together with the awesome deej software. To keep it from moving around a "sticky gel pad" found on aliexpress…
An audio cassette organizer inspired by Kalmar Designs. Made to snap together. Modified to stack and rework the sides.
Uses the screws and spacers that came with the amplifier board kit. Steps to assemble: 1. First prepare the top part by fastening the spacers with 4 screws on it. 2. Place the board into the bottom of the enclosure 3. Slide the top part…
I needed a mount for my M-audio M-track Duo, so that it could hang on the side of my desk instead of taking up space on my table. Printed flat (as in the stl) with tree support on overhangs only. 2 walls, 15% infill is sufficient. Printed…
Another Audioengine A2+ Speaker Stand. This one features options for multiple angles for optimal listening experience. Print on the side for a nicer surface. Includes insets on the bottom for anti-slip rubber feet with a diameter of 10mm.
Hi everyone! I was very underwhelmed from the default Quest 3 Audio. Firstly I went with the DAS Mod, but found the strap to be uncomfortable, especially with glasses. I decided to modify my KOSS Porta Pro headphones and make them fit to…
The Fosi Audio V3 Mono is an incredible piece of engineering, but it uses its entire aluminum chassis to dissipate heat. When sitting flat on a desk or stacked, airflow to the bottom of the unit is restricted. This stand helps solve the…
a holder to mount the board under a shelf you need 4 screws 3.5 x 12/16 mm
Designed for the Apache 1800 case, for one DD audio RL-X5x7 driver. .step files are included if you wish to mod them for different drivers. The outer trim requires 8 m4 heat set inserts, and is mounted with 8 m4x8mm screws. The jig has…
I printed this in PLA since PETG will probably flex to much. 0.3 mm layer height, 20% infill and 5 perimeters for extra strength. Changes: 20250805: I was inspired by Ninefifty's remix of my model and have now added top- and bottom end…
This enclosure for a custom GBS Control is based on Lord Voultar's excellent build guide for a GBS 8200 with some additions of my own. I've replaced the VGA output port with an HDMI converter wired in (Because who want's that clunky…
This model uses all four stock standoffs as attachment points. This makes a pretty snug fit. It also offers some thin vents on both sides for air circulation. You don't need special parts nor special tools to install this.
UPDATE: V3 IS OUT!!! It improves on this v1 in nearly every way. Check it out: https://www.prusaprinters.org/prints/56767-audiomoth-vault-v3 The original version below is deprecated, but entirely fine for less demanding environments,…
Designed for the Dukabel Headphone Extension Cable on Amazon: https://www.amazon.com/gp/product/B07FB6FB19 I used velcro to attach it to the desk. Printed with supports. Print instructions Printed on an MK3S using the 0.15mm Quality…
