57 386 modeli
Chances are you’ve heard about ocarinas thanks to the Nintendo game The Legend of Zelda: Ocarina of Time, whereas the name suggests, it plays an important role. Print this one in Blue and use to Triforce collar to make it look like the…
This is a simple display stand for Dummy 13 and other 13 Series figures. The stand consists of a base and two arm segments. You can then choose an adapter for your model from the included files. For best results, use ABS or PETG filament.…
UPDATE 3.1.2023: added V2 version with different inner shaping → same external size & characteristics, quicker print Info: 🟠 round edge → longer edge → scraper lasts longer then other spatula types scrapers if it is less sharp on one…
Two versions of the a display shelf that have customizable “grills” (or support walls). Notes: If printing this on a Prusa MK3S+, then the .stl files MUST BE SCALED to 85%. The grills were designed to snap in place without the need of…
one Foot is as big as the printbed from the MK3S so you can only print one at a time It is not a perfekt fit but close enough and does the job gerat I printed them with a 0.6mm Nozzle with 0.2 mm layerhight and 4 outer shells. hope you…
This is a reconstruction/remix from the original one that you can find on thingiverse here . Please, for any issues contact me or leave a comment, I will replay as soon as possible!
Update 18. 4. 2023: added 68x44mm card version (print big wheel 2x - there is not middle one). I don't have small cards and confirmation it works fine - please see discussion)…
These two models can be combined to make as large or as small as a display area as you need. Both being based on the same hexagon base, they fit together perfectly. Print as many as you like and display all of your awesome prints and/or…
I don't have the space to stand the PS5 vertically, and I wasn't happy with the console's shakiness without some stabilizing shims. I couldn't find anything for the PS5 Digital Edition, so I made this remix. The two stands are radially…
Update 19/11/23 - Added an extra large version. :D Multi-sort. A sorting tray I designed to quickly sort small parts - nuts, screws, bolts, electronic parts, lego, etc. Most sorting trays are designed to let you pick out a handful of…
This model is obsolete by my Playing Card Shuffler v3 https://www.printables.com/cs/model/427943-playing-card-shuffler-v3 ============================================================= Terraforming Mars board game has a lot of cards to…
This is a two handed sword for Dummy 13 inspired by the Dragon Slayer sword from Berserk. It is about 140x16mm and 3mm thick. I recommend using the “0.15mm Speed” profile in Prusaslicer, no changes needed. Also check out MattoDesign's…
After verifying several violations of the original license (CC-BY-NC-SA) applied to my models, I have decided to change the license used for my files. Although the new license (Standard Digital File License) would normally not allow…
Hello There I made a minimalistik version of my horizontal stand. I was inspired by Jon May and his digital stand. This version uses 50% less Material and has a little better fit. I hope you like this Version as well and post a make or a…
Unstable fusion360 source file It seems like a recent F360 update broke the model file. Since it is not the first time, I'm in the process of ditching Fusion360 from my workflow altogether. I'm learning FreeCAD and will attempt a redesign…
Stormtooper First Order The Force Aweakens helm weareble the 3mf files are prepared for multicolorprint the holder for the helmet inlays can be deleted in prusaslicer or windows 3d builder same for the speakermounts for the background…
Nested hearts print in place with no supports for a rotating fidget toy or hanging decoration. Choose with or without a loop for hanging. You can also pop the hearts out and replace them with different colors, by squeezing the outer heart…
Hose strut for swimming pools Intex, Marimex, Bestway…… Ideal use with 32mm pool hoses. The size of the hole is 40mm. For fast printing, printed in draft. Update 6/8/2023 Add new variant with holder offset by 20° degrees for specific…
This is yet another playing card box. It's a simple model, but quite functional. In addition to providing a nice place to store cards, the base makes a great draw pile holder, and the top makes a great discard pile holder. The…
— MAMA Rose — There is a pre added Brims at MakerWorld site (link at the very bottom) — MAMA Rose V2— Whats new in Version 2? Redesigned a whole model to be stronger and also I have added STEP and DXF files — Valentines Rose Stand can be…
It works like the one in the Illusionist movie (no camera trick needed). The perfect romantic Maker gift. You can use it as a necklace or keychain, it fits 4 little pictures inside. This is one of the coolest things I have ever designed,…
The zero play guide bar system is a huge benefit for anyone making and using jigs in a climate where conventional wood guide bars will expand and contract. I will use this with my table saw miter slot but you may find it useful with your…
This is a reconstruction/remix from the original one that you can find on thingiverse here .
Train station model created in Fusion 360 from a project foundable on http://www.smpd.cz/olympia/projekt.html Print instructions For easy printing, model is sliced to 4 parts which can be easily glued together.
Perfect gift for Mother's Day Presente perfeito para Dia da Mãe Regalo perfecto para el Día de la Madre If you like my work consider Buy me a coffee 😊
A simple cable organizer when you really have to many cables to manage. The design is similar to what you can find in computer room (usually it is several meters in length and you cut it to size, but here we are limited to the print bed…
PYC3D.ES SOCIAL MEDIA MEMBERSHIPS PYC3D SHOP DONATE CAKE TOPPER HAPPY BIRTHDAY Add a unique touch to your special occasion with our custom cake topper. Our high-quality, personalized cake toppers are perfect for weddings, birthdays, and…
Holder so that the pipe go straight out of the pool. UPDATE: fix to avoid dirt place under the pipe rounded corners 0,2 UPDATE: (30.08.2019) added 1.4in & 1.5in & 1.6in versions PS: if someone need another dimension, please drop a comment…
This model has 0,4mm tolerance. If you need less or more tollerance let me know in comment, i have project with parametric design so can add any tollerance. On pictures you see 70% rescalled print (black cube). For best results I suggest…
This print is useful to increase aiming accuracy for people in certain games. I personally needed that in Call of Duty Modern Warfare 2 Multiplayer mode. When you play without an extender, you can easily realize that sensitive aiming is…
Prusa Mini LCD backcover Print on it's flat face with supports Installation: First, unplug the LCD display cable on the back of the PCB. Then remove the 4 m3 screws holding the PCB in place, and slide the printed cover panel in. Reinstall…
Basic trays, self designed for my peg board but easy to adapt
Administrador de cartuchos de juegos Playstation Based on https://www.thingiverse.com/thing:2993610
Easy to print catch-all tray, prefect for keeping track of your stuff or organizing screws! No need for any support and can also be scaled bigger or smaller right in Prusaslicer! Thanks for checking it out!
Information: The width of the adaptor where chain pass is around 10 mm. Print settings: Step: 0.3 Shell: 3 Infill: 30% Supports: No Filament: PLA
Update: Added "no design" version of the box A simple box for storing Bicycle playing cards. My print settings: Resolution: 0.2mm Infill: 20% No supports needed I printed this using Devil Design Black PETG (I also attached the gcode…
[update] I added a new version “trayStackerShort” which doesn't extend as deep into the tray. This is useful when freezing liquids so the stackers don't get stuck and it prints faster.[/update] These have been confirmed to fit trays for…
Credit to original creator: https://www.thingiverse.com/thing:5148846 Printed at scale 150%, and added custom support for the chin.
Perfect for Mother's Day. Modified original by shrinking bottom plate, printed in two colors. Add filament / color change on Layer 22. Material: PETG Infill: 15% Grid Remix: https://www.thingiverse.com/thing:1541512
A compact, stackable disposable mixing pad with a small integrated spatula, designed for mixing epoxy, resin, glue, and other adhesives. Quick to print and using only a few grams of filament, this model is perfect for fast workshop use…
Change the plastic after a pause or with the help of a plug-in in the slicer.
I designed this PlayStation stand to allow the console to sit upright vertically. This is useful for consoles that have optical disc emulators installed such as XStation, PSIO or MODE. All ports are available as well as the parallel port…
[Update: Added another variant for "Wilton Gel Food Coloring Containers". There are now trays with these diameters: 25.5 mm (e.g. Army Painter, both standard and elevated variants), 33.5 mm (e.g. Citadel, standard variant) and 29.0 mm…
The nozzle on the air freshener at work was missing so I did a quick design and print for a replacement one. It's not the most beautiful design, but it works well and I feel no reason at this time to make an improved version. I used…
This compact pill case is designed for situations where a full-size pill organizer would be unnecessary or impractical. Its ultra-slim form factor makes it ideal not only for travel, but also for everyday situations such as g oing out for…
Sizes that have been tested and confirmed to fit. Size 000 Size 00 Size 0 Size 1 Size 2 Size 3 Size 4 Sizes I have not yet tested I pulled the size specs off the web but you will have to test the actual fit and function yourself. Please…
Simple circular holder - fits most challenge coins. Quick print, no supports. Small footprint.
You might also like: https://www.printables.com/model/280185-design-reference-radius-ruler-innerouter-1-to-12mm In the computer everything looks huge, but in reality 1mm could be enough or may be too flimsy depending on what you’re trying…
Overspray protector as sold by my favourite motorcycle (and bicycle) care product manufacturer, O.K. Wack Chemie, under the name “SauberSepp” or “CleanBob”. Of course, mine is better :) I have added sides to the reservoir to keep the lube…
Birthday Cake Toppers - all numbers Here you can download all digits form 0-9 as cake toppers for birthday cakes or other anniversaries. They look best if printed in two colors, e.g. with a white outline. How to Print Just scale to the…
Tengen Uzui Demon Slayer 1st Iteration and 2nd Iterations.
A useful and stackable tray used for sorting, organizing, or many other uses. Dimensions of standard size are 125mm x 125mm x 15mm (lip not included)
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
Adolescent Krayt Dragon Skull / Sand Dragon Skull Background on Krayt Dragons : These colossal reptiles, their hides tougher than durasteel, roamed the arid wastelands. Their howls echoed across the dunes, striking fear into the hearts of…
“Never miss a beat (or a bathroom break)!” “Mix & Relief – Spin tracks, not your bladder!” “The Bathroom Line is longer than your setlist!” 🎧 The Problem: Every DJ has been there. You’re in the middle of an electrifying set, the crowd is…
Bonsai Pot with Drip Tray, Drainage Mesh and Small Feet Looking for a modern, elegant bonsai pot? I was too — until I designed one myself! This set includes: A stylish bonsai pot with a drainage hole A matching drip tray to catch excess…
Hello fellow makers, I assembled the Lego model of the dune ornithopter as soon as it arrived, and realized quickly that it is too big to stand on top of my IKEA Kallax shelf with the landing gear down. Although a beautiful pose, I wanted…
Just place a beer bottle cap in the middle where you can put out the cigarette. In der Mitte einfach einen Kronkorken platzieren um die Zigarette auszudrücken.
This is a print-in-place model with a hinged jaw that can open and close making Murray the perfect companion for the aspiring ventriloquist with a taste for world domination. Muahahahaha!!! You have the option of choosing between a…
This outlet replaces the existing standard one in your pool I have a 15x42 Intex pool, and it seems that between the threads or the diameter of the outlet cover, the other designs are slightly off for what I have. This design matches the…
Optimized for printing in colored 0.2mm layers: Layers 1~3 Grey Layers 4~6 White Layers 7~9 Red Layers 10~12 Black 70mm in length, the most common size from retailer versions. Sized to fit common earring hardware. Keychain versions also…
⭐ UPDATE March 2026: I have decided to change the license to Attribution only, which now allows for Commercial use. Additionally many people have printed this with no supports without an issue. It's your call if you think your printer can…
I decided to design a Controller Holder to go with my Pulse Headphone Holder. If you have any questions, please feel free to contact me and please if you print it, please share Thx. Printing Instructions: 2 Perimeters 4 Top & Bottom…
Hi all I designed a Holder for my PlayStation 5 Headphones, the Holder fits mid-panel & will keep the Headset level, I also designed the distance to be just right so the headphones don’t permanently rest on the side panel. There are no…
This model is originally from Tingiverse, made by Printer2261 also known as Shane Jackson. https://www.thingiverse.com/thing:5172136 But I thought that users of printables would also like to be able to print this, since the Tesla Model Y…
I used the Golf Ball Marker Template from Thingiverse (https://www.thingiverse.com/thing:3830902/files) an added the RPT pattern from the Original Callaway to it. For best fitting i had to scale to 101% maybe for your Printer you have to…
10 slot blade holder for Andis clippers. For Pet Groomers, Barbers, Stylists, Cosplay costume makers and Crafters. Slots are sized to fit blades similar to sizes 000 or 3 1/2 (T blades will fit, but will knock into other blades. See…
Gothic Cross / Crucifixion in archway.
Wie der Name schon sagt habe ich einen Aschenbecher designt. Da ich nie einen für meine Gäste zu verfügung habe und jedes mal einen aus Alufolie basteln muss :D Now in English As the name suggests, I designed an ashtray. Since I never…
My wife and I enjoy building puzzles and our first step is always sorting the pieces. These trays print quickly at .3mm layer height with a .4mm nozzle. They puzzle fit together and stack for easy storage and transport of pieces. If you…
Make your collection visible New version of TCG display is available collection https://www.printables.com/model/1490952-multiple-tcg-sports-cards-wall-holder-and-display PSA graded TCG spots cards wall holder and display frame.
I wanted to create a new display stand for my 2022 Kenobi lightsaber model and came up with this design. It's simple yet elegant in a Feng Shui-ish way. The three parts can be printed without support and snap together (however a bit of…
Inspired by a few other similar designs, this little legged display stand can make presenting those special Easter eggs for the holiday even more adorable! Done in "two colors" so you can give the legs and feet a more traditional foul…
A nice case for your 7" Raspberry Pi Touch Display 2 (https://www.raspberrypi.com/products/touch-display-2/ ) and a Raspberry Pi. Features easy access to the USB and Ethernet ports. Designed to use the M2.5 x 6mm screws included with the…
This is my take on a hard drive adapter to allow mounting 3.5" drives to 5.25" bays. This includes front mounting points for a 120mm intake fan if desired (usable when installed in 3 adjacent bays).
This is a hexagon shaped dice tray, 29mm high (1.16") and 150mm wide (5.94") with a raised edge and thick wall for rolling your dice inside. Inside the tray, there is text and an image that says "It's Probably Fine" with a Nat 1 D20 and…
Create mini PC out of your Raspberry pi 4 and official Raspberry 7 inch touch display. Inside box there is enough room to fit even battery for portable version. For cooling i would advice something like this or any other heatsink that…
Remix of this model https://www.thingiverse.com/thing:4694896 to store two controls and a headset
This is a simple deck holder for your playing cards. There are several sizes included: Poker sized (63.5mm x 88.9mm / 2.5" x 3.5"), single deck Poker sized (63.5mm x 88.9mm / 2.5" x 3.5") double deck Bridge sized (57mm x 88.8mm / 2.25" x…
Birthday Cake Toppers - all numbers Here you can download all digits form 0-9 as cake toppers for birthday cakes or other anniversaries. They look best if printed in two colors, e.g. with a white outline. How to Print Just scale to the…
Features: - suportless magnet holes - easy to get the pen or sharpie from tray - stackable design
Zombicide 2nd Edition Box Organizer and Zombie Tray Remix I liked the original model but wanted something a little more rigid
In the images, there are great results with tri-color filament and putting gold layers as the two layers on the outside section. The layers are explained in the table below. Reference the picture for the 180 twist for the middle layer. It…
CLICK HERE If you're looking for 12ga storage trays for a standard M2A1 .50 cal ammo can! CLICK HERE If you're looking for 12ga storage trays for a Cabela's Dry-Storage Ammo Box! Some manufacturers sell their shells in boxes that are so…
DualShock 4 (PlayStation 4 Controller) Holder for the IKEA SKADIS pegboard system based on the wonderful Xbox Controller Holder made by @LayerCake who helpfully shared their Fusion 360 source files. Thanks to Andreas on GrabCAD for…
Simple yet very effective display stand for tech decks. Makes a great present. If you plan to hang it on the wall I recommend using 3m command strips. If you plan to stand it up I recommend adding a stop to the print script right before…
Messerteller für den Navimow i series. (getestet auf einem i105e, sollte auch für den i108e passen) 6 Klingen und 20cm Schnittbreite (original hat 3 Klingen und 18cm Schnittbreite) Benötigt werden neben den Klingen und den Schrauben nur…
Assembling: Put the bottom grid into the skimmer basket tube. There are 4 latches at the end of the tube. Material: PETG Nozzle: 0.4 Layers: 0.3 mm Infill: 50 % Skimmer basket tube: Skirt height: 20 layers Loops: 2 Brim: inside and…
The printing is relatively uncomplicated; I used some supports to make the print cleaner, but these aren't absolutely necessary. The clay should first be rolled out and cut using the cookie cutter. The cookie cutter is slightly larger…
Remix of AJsRaceway's Minifigure Display designed to hold and display LEGO Dimensions models on their RFID tag bases. The depth of the hex perfectly matches the diameter of the Toy Tags so these are 100% compatible with AJsRaceway's hexes…
A simple stand for the (now old) Dualshock3 controllers from the PS3 era. I kept tolerances on the larger side, so it is more forgiving regarding exact placement on the stand for the price of a looser fit. I have only checked controller…
An elegant tray shaped in an organic style, modeled to take advantage of organic supports to generate three intriguing legs, and allowing for a color change (if desired) between the legs and the tray. Both the original “etched” version…
Sjablones for cutting clay for making jewelry
Pillbox for 7 days with cover that moves step by step, so you can open only part for 1 day. With inner arrows :) PrusaSlicer shows the warning - Empty layers has been detected. I try to print it, everything was good. Model…
First: This is not mine. I had several of these and overtime things happen, and I needed more. I couldn't find the design or print file, and went looking for it, and couldn't find where I downloaded it either. I finally gave up and tried…
Holds your phone in landscape orientation in your car by inserting into a car's CD player CD slot. Included .3mf file for personal customization See included READ ME doc. for additional print info. Please hit the like ♥ and post your make…
This print require to modify some slicer parameters, G-code for Prusa MK4 and MK3S+ is provided, if you need to slice this model for your printer please, follow the instructions step by step. More model variations and 70mm size coming…
This was created by Thingiverse user still11, and is licensed under cc. GO AWAY GNOME by still11 on Thingiverse: https://www.thingiverse.com/thing:4968117 I just scaled it 80% and printed
First layer 150x150 0.2H First layer 150x180 0.2H First layer 50x50 0.2H
Today’s design continues the holiday theme with another Christmas ornament . This one has a more oval shape and features a spiral pattern made of individual open lines , giving it a see-through, airy look ✨. The ornament prints easily…
![Multi-Layer Rotating Rings [Single Extruder, No MMU]](https://media.printables.com/media/prints/1116868/images/8436648_57e3eb31-5416-4c62-96d5-8f7b6a244d45_fbec544c-3120-415d-a502-4816ae87c15d/rotatingmulticolorrings.png)
