Wyniki wyszukiwania: azd

Seat belt - deactiv alarm. Acura, BAIC, Buick, BYD, Cadillac, Chery, Chevrolet, Dodge, Ford, GMC, for Honda, Hyundai, Infiniti, Isuzu, Jaecoo, Jeep, KIA, Lexus, Lincoln, Mazda, MG, Mitsubishi, Nissan, Omoda, RAM, Subaru, Suzuki, Tesla, Toyota + TRUCKS

Mazda Keychain

6mm keyring hole 4.8mm tall (4mm base and .8mm color switch)

mazda miata mx-5 na

a quick clean wallmounted 2d model of mazda miata na mx-5 for car-guys, if you like this model, id like to see your make, happy printing! (i advise to clean your printbed before so it does not come off, also rise the bed temps up a bit…

MAZDA MX-5 NA KEYCHAIN

This unique keychain is a miniature replica of the MAZDA MX-5 NA , designed with a sleek, compact look at 7 cm by 5 cm . Printed in 3D with a two-color layer change for added depth and visual appeal, it captures the distinctive silhouette…

Przejazd kolejowy - Brio (Railway crossing - Brio)

Przejazd kolejowy montowany do torów drewnianych za pomocą wkręta lub do toru drukowanego za pomocą śruby M3 The railway crossing is mounted to wooden tracks by means of a screw or to a track printed using the M3 screw

Mazda Rx7 Emblem

Front and back emblem for rx7 FB 1981 to 1985. Different year models came with a different number of prongs on the back (1984 and 1985 front emblem need 3 prongs) so feel free to modify to make it fit your needs. Models aren't an exact…

Mazda Display mobile holder - CX3

Update: V2 - file name Version 2 moved from ball joint to more secure variation connected with m3 screws. Gravity phone Holder is also modified in prusaslicer with modifiers to secure it with m3 screws. First version I have printed in…

Mazda USB hub removal tool

Mazda USB hub removal tool for removing & installing new CarPlay Android Auto hub, this tool makes it a 5 minute job. Remove passenger side center console panel, reach behind and press this over 4 latches. This tool save over 2 hours of…

Mazda Einkaufschip / Shopping Cart Chip

Der Einkaufschip hat die Größe einer 1€ Münze.

Keychain with logo. Acura, BAIC, Buick, BYD, Cadillac, Chery, Chevrolet, Dodge, Ford, GMC, for Honda, Hyundai, Infiniti, Isuzu, Jaecoo, Jeep, KIA, Lexus, Lincoln, Mazda, MG, Mitsubishi, Nissan, Omoda, RAM, Subaru, Suzuki, Tesla, Toyota.

Keychains in various versions. Keychains modeled after the seat belt alarm lock. Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm. For a 0.12 mm layer - From layer 26 For a 0.16 mm layer (initial…

Hot Wheels Basic Display (CUSTOMIZABLE NOW!) ('91 Mazda MX-5 Miata)

This was the car that initiated my hotwheels collection. I thought it deserved a basic display in order for it to stand out from the rest of my collection. I tried to keep it basic so it wouldn't take the focus off the car. ---UPDATE--- I…

Mazda MX-5 Wall Art

Mazda MX-5 Wall Art Silhouette model. Adjustable size. I accept model suggestions.

Gear Knob (Mazda BT50)

Printed with PETG due to in-car use. Seems to work fine. USE FUZZY SKIN mode to get nice grip texture. Use adaptive layers to get nice smooth top contour. Standard supports used. The screw sometimes comes a little loose, so I'd recommend…

Mazda 6 A-pillar trim clip

You can find it here with the part number D651-68-162A. Doesn't look exactly like in the catalogue, as mine one has the little “tail” separately, but I think it should be compatible. Also, most probably compatible with many other Mazda…

Tool to Open Fuel Pump Cover (Mazda)

I had to replace the fuel pump on a Mazda 6 but the cover does not open easily. There are tools available which are made from steel and can be adjusted for different diameters, but I couldn't get my hands on one of these and it was a long…

Case for AZDelivery serial (USB to TTL) adapter FT232RL

A OpenSCAD case for AZDelivery FT232RL adapter, to fully enclose the adapter, with "pad" to ZIP-tie the jumper cables. Originally the ZIP-tie pad was flat, but it was way too easy to break it off. Then I changed to this triangular-ish…

Case for AZDelivery relay module

This is a 2-part case for AZDelivery dual-channel 5V Solid-State relay module. Made in OpenSCAD, so it is fully parametric. LEDs are visible (there are holes to let the light though), as well as the screw terminals are accessible.…

Mazda RX-7 (FD3S) Kit Card (1:24 scale)

Summary This is a model of a Mazda RX7 (FD3S) in a kit card style. Some characteristic details can be discovered. Equipped with seperate exhaust ;-) After printing, the model can be assembled with the help of integrated connectors. The…

Low-Poly Mazda Miata

Welcome to The Low Poly Auto Show! This is a low-poly Mazda Miata. Designed to be printed without supports at 0.1/0.2 mm layer height if you have a solid machine with plenty of cooling. I recommend you print this at full size, otherwise…

Mazda RX-7 Turbo II (FC3S) Kit Card (1:24 scale)

Summary This is a model of a Mazda RX-7 Turbo II (FC3S) in a kit card style. Some characteristic details can be discovered. Equipped with seperate exhausts ;-) After printing, the model can be assembled with the help of integrated…

Mazda Miata / MX-5 (NB) Kit Card

Update 06.09.2024: You will find a complete redesign of this model here . Update 25.05.2024: Added version for 4-color multicolor print (AMS & MMU). Edit: Fixed error in 3MF-file. Summary It is a model of a Mazda Miata / MX-5 (NB) in a…

Mazda Miata / MX-5 (NB) Kit Card COMPLETE REDESIGN with hardtop and softtop

Summary It is a model of a Mazda Miata / MX-5 (NB) in a kit card style. This is a complete redesign, based on the idea of my old model . This one has been redesigned from scratch with more experience and knowledge. Some characteristic…

Mazda keychain

Mazda car brand keychain, with a simple and easy design for a quick impression and low material cost. For daily use, it's better to modify the keychain scale to 70 or 80% to make it more comfortable and less bulky.

Seat belt - deactiv alarm. Alfa Romeo, Audi, BMW, Citroen, Cupra, Dacia, Ferrari, FIAT, Jaguar, Land Rover, Mazda, Mercedes, MG, Mini, Opel, Peugeot, Porsche, Range Rover, Renault, Seat, Skoda, Toyota, Volvo, VW.

Decorated with a logo seat belt clip. I recommend using it to deactivate the weight sensor. When carrying luggage on the seat or for decoration. Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm.…

Mazda Miata (MX-5) kit card

Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…

Cupholder for NB Mazda Miata (1998-2005)

As you can see in the pictures, this is a two part design. You will need to print the mounting clip and the actual cupholder. The clip is mounted in the passenger footwell by removing the forward screw on the center console near where the…

MAZDA 6 Center Tunnel ORGANIZER

Recommended material ASA / PETG Print settings Layer height = 0.3 Perimeter = 2

Mazda Logo 3D Keychain

Print with a rather fine layer height to accomplish the 3 Dimensional shape of the logo. Print with the Flat face facing downwards on FDM Printers

Cupholder Mazda MX5 NA Miata

Cupholder Mazda MX5 NA Miata

Mazda MX-5 (Miata) cabin filter

I made this to replace the factory wire “filter” because I got some leaves and other tree parts in my fan after 20 years. You need to remove the factory piece to install this and probably clean its remnants with a dremel. (The wire is…

Mazda Miata MX5 ND RF

I modified the original as it was too hard to print. I modified the model and fixed many of the imperfections and broken meshes. I also separated the wheels from the body as printing the whole thing with supports was proving a bit…

TOPLINE 1/10 Mazda FC3S RX-7 Body Accessories (GT Wing, Spoiler, Pop Up Lights, Front Bumper Support)

This is a compilation of body accessories I designed for the TOPLIINE FC3S body I'm using on my 1/10 RC drift car. Pop-up assembly: All of these parts can be attached with clear Gorilla double-sided mounting tape. It is strong enough to…

Mazda MX-5 Miata NB for MMU

You want MX-5 and you also has a MMU? Here you go, I used PLA for print and it looks gorgeous. It would be nice to have PETG supports tho, separation could be easier.

Mazda MX5 Miata Cup Holder System

This is a modular Cup Holder System for the early (89-97) Mazda MX5 (NA) Miata. The bracket attaches to the side of the console near the radio/heater panel (left, right or both sides) using the existing screw holes. You may need to source…

Mazda MX-5 NA Silhouette Wall Art

Mazda MX-5 Easy to print . Of course you can scale it the size you want. Easy to print for up to 100cm length, just cut it in some parts with the new slicer. I recomend a strength of about 2-3mm. Add some double-sided tape and stick it on…

Mazda MX5/Miata NA & NB - Seat Belt Extenders

Remixed from bbeavis design (https://www.thingiverse.com/thing:3063090) I printed his but it was too thin, so I decided to beef it up and also change the design. It's also 2cm longer to be closer to your shoulder. I advise you to print…

Mazda Miata MX-5 (Customized) - Tuned Sports Car Model

Showcase personalized automotive style with this 3D printable STL model of a Customized Mazda Miata MX-5. This tuned sports car model is perfect for automotive enthusiasts and personalization fans looking to display their passion for…

Mazda RX-8 Kit Card (1:24 scale)

Summary This is a model of a Mazda RX-8 in a kit card style. Some characteristic details can be discovered. After printing, the model can be assembled with the help of integrated connectors. The wheels can be turned, but the car will not…

Mazda Miata MK1 Hood Rod Clip

Replacement Mazda Miata MK1 Hood Rod Clip. I printed mine in PLA and have been driving around with it for over 3 years now. Designed to be printed without a raft or supports. Update: ABS or PETG might be a better material because they…

Open Z V16 Mazda MX-5 Miata 1995 90mm wheelbase

A mazda Miata body to be used with open z V16 chassis, it comes with a 90mm wheelbase, using screws fixation. Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: Yes Supports: Yes Resolution: .15 Infill: 10% Filament: Does not…

1999 - 2000 NB1 Mazda Miata Console Hinge

I recommend using the .3mf files. This is a modified version of Binchotan's console hinge from Thingiverse. When I tried his design, it immediately broke due to how thin the walls of the hinge were. I thickened the walls, made the hinge…

MAZDA MX5 NB Miata Cup holder ('Project DEX')

MAZDA MX5 NB Miata Cup holder ('Project DEX'): ======================================= Purpose: ---------- This design is created to address the issue of having lack of a cup holder available in Mazda MX 5 NB (Miata) from the 90's until…

Rx7 mazda rotary engine wall art

a quick clean wallmounted 2d model of rx7 for car-guys, if you like this model, id like to see your make, happy printing! (i advise to clean your printbed before so it does not come off, also rise the bed temps up a bit and slow the…

Mazda Logo

Mazda logo in 3D. 5mm high.

2021 Mazda BT50 / D-Max Cup Holder Inserts

2021 Mazda BT50 / D-Max Cup Holder Inserts Description: If you're the owner of a 2021 Isuzu D-Max or Mazda BT50 and tired of the excessively deep cup holders, these inserts are what you're looking for. Print out these inserts and drop…

Mazda Miata (MX5) Sun Visor Delete Plate

Removed those useless sun visors? This model is an easy-to-print block-off plate that fits Mk1 and Mk2 MX5/ NA and NB Miata. It uses the stock hardware to install and only takes 2 minutes. The models in the pictures are printed with a…

Mazda RX-8 kit card with rotating wheels

Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model in multiple colors produces…

Mazda Mx-5 NB (Miata)

I added the blue pages if you want to design it in fusion 360.

Front Crank Seal Install Tool - Mazda MX-5 Miata BP

Front Crank Seal Install Tool - Mazda MX-5 Miata BP Suits all Mazda B6/BP 1.6/1.8 engines (except those with the small nose crank) Simply start the seal on the front crank nose, then slide the tool in place and gently tighten down the…

Clutch Alignment Tool - Mazda MX-5 Miata

Clutch Alignment tool Suits Mazda MX-5 Miata B6/BP, also confirmed to fit ND miata. Not tested in other cars, but likely to suit more than just the miata. PLA with 50% infill was plenty strong enough.

ND Mazda MX-5 Miata Silhouette / Wall art

I've uploaded two silhouettes of the ND MX-5; a convertible and RF version. Update Feb. 7, 2025 - Third item added. Per user request, I've added wheels to the convertible version.

Majin Emblem for Mazda 3 gen2 rear

This Majin logo was designed to fit the holes for the back emblem of a gen2 Mazda 3. It also just looks cool as a thing to have. To use a PLA logo on a car I heated the print gently and bent it to better fit the curve of the trunk. After…

Rear Main Crank Seal Install Tool for Mazda BP B6 (Miata)

Rear Main Crank Seal Install Tool for Mazda Miata MX-5 B6 BP Engines As seen in this video: https://www.youtube.com/watch?v=T0L0Rpsbdek

LEGO Mazda MX-5 Miata

Mazda MX-5 Miata This is a model compatible with the LEGO system. Just print it, attach a LEGO chassis, and you're ready to play. Very easy, very simple.

2020 Mazda Key Fob housing v2

Small remix of 5ambear's Mazda keyfob Slightly thicker walls to allow for chamfered edges for a smoother edge. No glue required, just some very tight clearances that allow the pieces to be press-fit. Something like 0.1mm tolerance, so…

Mazda MX-5 Miata ND Phone holder for cup holder

Phone holder for use with cup holder. It features an additional stabilzer which should avoid too much movement or vibration of the phone when driving fast turns. It consists of several parts. I suggest glueing the arm, base and connector.…

Mazda RX-7 Silhouette, 2D Wall Art

◾ Size: 20cm / 7.9 inches in width, 15cm / 5.9 inches in height, and 0.3cm / 0.1inch in thickness. If you want to increase the size of the model, you can take it apart and print it separately. ◾ If you want to paint your model with a…

Mazda RX7 Print in Place with moving wheels

This is a 1/48 scale print-in-place high quality model of a 3rd Generation Mazda RX7 The wheels and axles are separate from the rest of the car, allowing it to print in one piece and let the wheels move. It's a fun, fairly easy print, and…

mazda mx-5 mx5 miata roof latch button fix with adjustable screw

V3 fixed some tolerances and rounded the top more to clear the mount better. V2.1 wider at the bottom and uses a M3 8mm countersunk screw V2 now with extra grip top latch fix for mazda miata mx5 i recently got a hardtop and one of the…

Mazda MX-5 NB

Mazda MX-5 Easy to print . Of course you can scale it the size you want. Easy to print for up to 100cm length, just cut it in some parts with the new slicer. I recomend a strength of about 2-3mm. Add some double-sided tape and stick it on…

Cam Seal Install Tool - Mazda MX-5 Miata BP

Cam Seal Install Tool - Mazda MX-5 Miata BP Suits all Mazda BP 1.8 engines (except VVT intake cam - I have a separate tool for that) Untested for B6 1.6 engines but possibly suits those also. Simply start the seal on the camshaft, then…

Rear Bumper Tow Towing Hook Cover Eye Caps Fit for Mazda 3 2014-2016

Rear Bumper Tow Towing Hook Cover Eye Caps Fit for Mazda 3 2014-2016 Text version can be modified so that you can add some text to your bumper Category: Automotive

The Evil Mazda Valve Stem Cap

I like the “ Evil ” Mazda Logo, and it seems like Mazda themselves should simply adopt it as their own. Here is a Valve stem with the “ Evil ” Mazda Logo. It seemed to me if you drive and love your Mazda you should have a set of Valve…

Funnel for Mazda 3 Skyactiv engine oil change

This is what you've been looking for on all the 3D parts forums. You just want a better funnel when changing the oil in your Skyactiv engine on your Mazda 3 because standard funnels don't stand still. For some reason, Mazda thought it was…

Mazda Mx5 Mk1 Mk2 Wiper cap cover

This can be a replacement for a missing wiper cap cover on the Mazda Mx5 Mk1 or Mk2. Made using measurements from the original to match as close as possible. This is a snug fit so you might need to gently tap it in. This can be a…

Mazda MX 5 - Iconic Lightweight Sports Car Model

Experience the joy of pure driving with this 3D printable STL model of the Mazda Miata MX-5. This iconic lightweight sports car model is perfect for automotive enthusiasts and roadster fans looking to display the legendary handling and…

Mazda Miata MX-5 NA Roll bar 1994 Wall Art

Wall Art Silhouette model of the Mazda Miata MX-5 NA Roll bar 1994. Adjustable size. I accept model requests and ideas.

Efini Badge: Mazda RX7 logo

This is my model of the Efini Badge used on some special editions of the RX7. It should be to scale as well. Print on whatever detail you like i found 0.4mm nozzle with .15 layer height to work well. No brim or supports needed. if you are…

40oz Water Bottle Holder for 2020 (Gen4) Mazda 3

The cup holder position on this car didn't allow me to use the standard cup holder extension with my favorite water bottle so I made this. It's not perfect but it's more than good enough for me and holds my water bottle. Might tweak it…

MAZDA RX7 (1/27) / Turbo Accessories add-ons

This is Turbo Accessories add-ons for the Mazda RX7 Engine ( https://www.thingiverse.com/thing:3006071 ). Printed parts list (15) 1 x TurboAirFilter : Layer:0.15mm Raft:no Support:no Infill:15% 1 x TurboAirFilterBase : Layer:0.15mm…

WLED Case for ESP32-Wroom-32 from AZDelivery

Remixed to fit my ESP32 Post-Printing The cover isn't press fit, so maybe you need to seccure it somehow else. How I Designed This I took the Step-file and imported it into Fusion360. Category: DIY

NA Mazda Miata MX5 silhouette side profile UPDATED

Added the front OEM chin spoiler and got rid of one of the headlights since this side profile isn't supposed to have any 3D perspective to it.

Mazda CX7, CX9, RX8, RX3, RX6 Motor window gear

Replacement for the window motor gear. Works as intended, printed with PETG-CF.

Logitech G29 / G920 / G27 Centerplate Mazda Remix

Should bolt on the wheel perfectly with the bolts already on the original cap.

Mazda Oil Cap

Again i lost my oilcap of my mazda pickup ,... its getting a habit.. not good... Printed it in ABS and it works perfect ! If you want to make your own design keep in mind the threads are m36 and the pitch is 4mm. It toke me a while to…

Mazda MX-5 - Hood Catch Stopper MK2.5

Protect the striker in the windscreen from scratching and rusting due to constant contact when latching your soft top. These clips break apart with age and can create wind noise. Its not an exact match to original to be easier to 3d print…

Plug for roof rack hole - Mazda 3

I lost my roof rack plug and decided to design my own using OpenSCAD. This one is made so it specifically covers all holes. It is little wider than original one but works correctly. If there are some adjustments that are needed then…

Bip&Go TRP-4010 Holder Mazda CX-30

The holder for my BIP&GO has been lost so I made a new one Use PETG with organic supports to print I used an 0.6mm nozzle with 0.3mm

Mazda Mx5 Miata Mk2.5 NBFL Cupholder

simple cupholder for your Mazda mx5, allowing you to have your beverage out of the way of the gear stick whilst keeping it well within reach! this simple design allows you to use the existing passenger side centre console screw (and cap)…

Mazda keychain

scale it down as you like

Mazda Miata Speaker Grill Cover (NA)

Mazda Miata Speaker Grill Cover (NA) The speaker Cover is 7" and has a 1995 Era period correct Mazda Logo Mount locations are 4 ½" on center Supports are needed, so make sure to calibrate your machine for this, as failed supports will…

Brodit Design Phone Mount - Mazda 2/Demio (DJ) 2015+ and CX3

Brodit design phone mount for Mazda 2 (DJ) 2015+ and CX3 Ball Phone Mount need 4 x M2.5 x 8mm to screw at the holder And need 4 brass insert M2.5 * 5 Recommend print with PETG or ABS . Holder V2 I just redesign with thicker body and use…

Mazda MX-5 Keyring - Miata

I have been playing around with multi colour prints with my Ender 3 printer with a single extruder. I created a few designs for keyrings for the Mazda MX-5. There is 3 different designs, for the different eras of the MX-5 and a Miata…

Mazda Miata/MX-5 Door Bushing

Miata Solid Door Bushing. Will solve your door rattle issues. Expect to notice an increase in stiffness. ABS or PETG recommended. I printed it in ASA with 3 perimeters and 15% infill. You can use more. No issues more than a year later.

Mazda 3 2008 MPS Parcel Shelf Clip

Mazda 3 2008 MPS Parcel Shelf Clip Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Yes Category: Automotive

Mazda 3 Cabin Light Toggle Button

Replacement toggle buttons for the forward overhead cabin lights. Tested with 2011 Mazda 3. Print with the flat face on the build plate, no supports.

2021/2022 Mazda CX-30 Center Console Phone Holder

Edit: Just a heads up, I recommend using supports like this when printing this: I also recommend printing this with big thick lines to speed up the print. This really isn't something that needs super fine detail in order to work. Might as…

NC/ND Mazda Logo Rear

This is a recreated Mazda logo. The logo should be scaled properly. It is not a perfect recreation.

Rotary coaster set Mazda RX-7

Rotary coaster with different style insert badges for the middle

Mazda CX 60 Cup Organizer

Ich brauchte noch etwas Organisationsraum im CX 60 ;-) UPDATE 1 Auf besonderen Wunsch nun auch eine Version für zwei Park/Tankkarten.

Mazda Rx7 Wankel Remix

Mazda RX7 Wankel Rotary Engine 13B-REW Remix This model Wankel was designed by ericthepoolboy and is available at thingiverse.com/thing:3006071. MakerRx.com offers a kit of all non-printed parts needed to build the model.…

Fiat/Abarth 124 Spider / Mazda Mx-5 Magnetic Smartphone Holder for Cupholder Plug

This is a magnetic smartphone holder designed remixing this thingiverse simple base plug for the Fiat 124 spider / Mazda Mx-5 cupholder slot https://www.thingiverse.com/thing:2108802 . It is intended to be printed in a heat-resistant…

Mazda ND MX-5 Center Console Shelf

I decided to print my own parcel shelf for the ND MX-5 (and Abarth 124). The shelf is right at the limits of the size for the MK3 but does fit. There are three options currently (I might add more as I get ideas/use out of it): Default:…

GORAZDE (Antipersonnel Landmine)

I printed from PET-G, but PLA is probably a better filament. All the parts fit together. Only after printing did I realize I could make the internal mechanism from one part and not two. I won't change it though if it works. Maybe it's the…

Mazda keychain

Mazda keychain print PLA

Mazda washer fluid reservoir cap

This is a washer fluid reservoir cap made for Mazda CX-5. After a quick google search I found out that this should be compatible with other Mazda models. I used PETG for it, but you could use ABS or other material that is resistant to…

Fender Vent V2 for Mazda MX-5 Miata by BEAVIS

Newer style Fender vents to suit the front guards of a Mazda MX-5 Miata. I've fit them to my 2001 NB, but they should hopefully fit an NA (although the fender shape is different) Designed with aero in mind, to reduce wheel well pressure.…

Mazda 2 boot parcel clip

If your broke off and need a replacement, this is the print for you

Mazda 6 centre console phone holder

Super simple design, should work with all Mazda 6's from 2012 onwards. In my country the Mazda6 still needs the phone to be plugged in by cable for the Apple Carplay to work, the obvious place to put your phone is in the drink…

Mazda 6 Car Logo 3D

My car emblem got stolen so I printed a new one ;)