975 modeli
Wall mount for Lego Oracle Red Bull Racing RB20 F1 set 42206. This mount uses two gray pins on the bottom of the F1 to hold. You can easily see this pins trough the seat for easy hanging. Print settings: Infill: 30% 3D gyroid Perimeters: 3
Wydruk około 0,79 €–0,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Layer height: 0.15 Initial Layer Height: 0.4 How to get great quality: Legs and arms must be printed vertically (Be careful to not F*ck up with Z axis) Slow the printing process (I did on 120mm/s) Tree support is a must 10% infill 65°…
Wydruk około 9,32 €–11,39 € nettoWstępna wycena jednego wariantu
B2EMO : Andor : Star Wars Droid. This has been available for a few years now -→ buried as an add on option in another model of mine. Hilarious. I spent 20 minutes looking for it thinking that It was posted as a stand-alone. Nope.
Wydruk około 1,76 €–2,15 € nettoWstępna wycena jednego wariantu
A battery holder for Hilti B22 Battery for the workshop, garage or your work van. Importen info about Gcode: It print with a 2mm brim to add strengh to bed. I just took a deburrs on the bottom edge and it was perfect after. The 2 holes to…
Wydruk około 1,39 €–1,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I printed in PLA at 15% infil with no supports, and it held the B 22-85 I tested it with Holds the battery well enough to not fall out, but loose enough to easily take the battery out when needed. I had designed this and printed it for a…
Wydruk około 2,03 €–2,48 € nettoWstępna wycena jednego wariantu
Just a simple DS18B20 Temperature Sensor mount. I printed it with PLA but if you need it in a place that gets hot you better use something that can withstand the temperature. Slide the sensor in from the top or the bottom. It has a tight…
Wydruk około 0,39 €–0,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Improvements to the filament path to resolve issues I was having with the curly end of a spool not unloading reliably. Added dual blade in same selector dimensions, please note this does require TZB-MMU2S firmware to cut successfully.…
Wydruk około 3,27 €–4,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I'm running multiple tools and found that the BTT provided cables were unshielded and interfering with each other when rubbing against one another, causing bus communications to freak out. I made new cabling with some LDO FEP cable, but…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
This is a mounting bracket that holds a JSN-SR04T ultrasonic sensor and waterproof DS18B20 temperature sensor for mounting to a 1" square tube. This is part of a project to measure the water level of a creek. The sensor will be extended…
Wydruk około 1,81 €–2,21 € nettoWstępna wycena jednego wariantu
CORNER BRACKET for fixing a SilverCrest lidl MOTION DETECTOR. SilverCrest Motion Sensor Model SMSZ 1 B2 manufactured by Lidl. I looked for a simple solution is effective, This radar has an aperture of 120 deg, for a height of 2.30m the…
Wydruk około 1,33 €–1,62 € nettoWstępna wycena jednego wariantu
Remixed to add holes so that buttons can be pressed intentionally, but are still protected from accidental activation. Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 80+ Supports: No Print…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
A replacement diffuser for the Nikon SB24 Speedlight. A push fit that doesn't fall off easily. For best results print in a white PETG with a low layer height (max 01.5mm). Print instructions PETG 0.15mm layer height 4 perimeters Infill…
Wydruk około 2,45 €–2,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed something to make connections to the pads while I tried to flash a KMC Smart Tap Mini with OpenBK. It uses a Tuya CB2S module that's edge-mounted through the main circuit board. This jig can be held/clamped against the bit that…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a fidget spinner that you attach to some kind of base with a single screw. It consists of several 3D printed pieces, modified ball bearing and possibly several washers for M5 bolts. The modified ball bearing in question is the 608…
Wydruk około 1,01 €–1,23 € nettoWstępna wycena jednego wariantu
Chopstick Buddies are attachments to a plain chopstick. They are designed for beginners, and for a sizable population who cannot hold unaided the thumb pose required by the traditional, standard chopstick grip. See Chopstick Buddies on…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
Case pour module capteur de température 18b20. Ajout de mon logo pour ventilation, un passage des fils pré-soudé sur le module et des clips pour garder fermé. Print instructions Si vous voulez imprimer sans failles ajoutez des supports…
Wydruk około 0,40 €–0,48 € nettoWstępna wycena jednego wariantu
Sony SRS-XB23 wireless speakers are famous for their high-quality sound, but their big drawback is directionality. When placed on a desk, the sound does not travel in a straight line to the ears. This stand solves this problem . When you…
Wydruk około 4,84 €–5,91 € nettoWstępna wycena jednego wariantu
What it is A two-part printable hood (backshell) for D-Sub connectors with solder cups, in three sizes: DE9 (often called DB9), DA15 and DB25. It fits on a connector you have already soldered. The two shells are held together by cable…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
3D Files for a 1:12 and 1:48 scale version of a B2 Battle Droid! This is 1 pose of a 12 pose set. If you like my work and wish to support me or get other poses, check out my Patreon here: https://patreon.com/galacticarmory
This mount raises the PG7 so you don't have a large “S” loop when using the smaller mounts. This design was provided by Nyxcode on Voron discord. Enjoy
Installing a 🥰 BTT SB2209 on my Voron Stealthburner/CW2, I wasn't satisfied with the available umbilical solutions. So I started from scratch, explored different approaches, and designed this Cable Bridge PLUS. It ended up not that…
A purpose build XT30 2+2 plug designed for the 🥰 BTT SB2209 / SB2240 toolhead boards. Built with a minimal footprint to keep your cable routing clean and uncluttered. Companion Model: Use the Cable Bridge PLUS to form a sleek and ultra…
Since the SB2040 canbus board gets pretty hot it's not the best idea to cover it with a closed pcb cover. This perforated cover improves the temperatures already a lot without any built-in fan. Used this 2000h now without any issues with…
2.9.2023 Update: You were and I was wrong, forgot to add type of tab. Description updated, files added (some filenames had changed to avoid confusion) ____________________________________________________ The B2 bomber is one of the most…
can be printed together the model needs to be glued together or separately in other colours can be printed without support the Bomber is very realistic Print in place kit card , Assembly required
[English] I used the chain anchor 2hole design, closed the hole at the tip and enlarged the anchor a bit because I didn't like the designs or the just didn't fit. It includes a M12x1.5 thread to be able to attach a PG7 cable gland. Just…
I revisit the city of Ulvheim. This time we leave to craftsmen quarters and come to the powerful nobles and rich merchants. Ulvheim B2 adds to B1 so your ruins can have floors. You can print as many as you like and make something really…
Turkish drone Baykar Bayraktar TB2 model. Printed on Artillery Hornet 3D printer. Material ABS To print from ABS, I had to add a tower, which is connected to the wing.
Modified Mike F's " SB2209 / SB2240 mount for PUG " for use with a PG7 Cable Gland. This one has M12x1.25 threads so the PG7 can screw directly in. 2 versions included, 1 has a cutout and one doesn't. I haven't tested this yet, but I'll…
UPD : Added suitable for main body Voron-Stealthburner Thanks to @Ibot_3D for the idea. He inspired me with his design! But his model was a little hard to print and many (including me) could not print this model. I increased the spaces…
In homage to my old Beech Musketeer, I made this fun little toy you get to assemble yourself. May you have a CSVU day! This one prints without supports in your resin printer. If you found this useful, it would bring me great joy to see…
The SB2040 has a problem with it overheating and sometimes failing with permanent damage, so I decided to look for a solution to keep it cool. Initially I found people were using 20mm fans to cool their SB2040's but these were rather…
B2B JST XH Straight Connector pitch 2.54mm 2/3/4/5/6/7/8/9/10/11/12 pin
Version 2 This variation includes slots for zipties. This is particularly usefull If you are also routing the extruder cables through the umbilical instead of using the driver on your SB2209/SB2240. Replaces the Stealthburner cable anchor…
BTT SB2209 CanBus boards unfortunately have a design flaw that makes it easy to misalign pins in the board to board socket, leading to voltages being delivered to the wrong places. This can ultimately result in damage to electronics, such…
can be printed together the model needs to be glued together or separately in other colours can be printed without support the Stuka is very realistic Print in place kit card , Assembly required
Revisions 2024-03-26 Revised Main Body to incorporate Straightened Latch. Replaced corresponding Motor Plate as well. Overview This group of objects implements a CAN based Toolhead for the Voron 2.4r2 3D Printer. The design uses a…
Magnet based on the US Air Force B2 Spirit airplane. Minimal model. Uses 6mm x 3mm magnets. G-Code has a layer pause at 3.8mm to drop in magnets.
This is a remix of this model: https://www.printables.com/model/544802-wall-mount-b2-bomber You can find a good and detailed wiki for the print at the origin. I intentionally didn't include the wall mounts, so he gets the downloads. I…
V1.1 - UPDATE: As @Hornet331_645553 noticed and mentioned, there was a slight misalignment with the lower sensor. I have implemented a fix for it as well as added slightly more clearance for the upper D2F switch, hopefully making it…
Remixed together Alexander's and BTT's Cable door for the voron stealthburner to work with the SB2209 / SB2240 If you want to use a controlled 3rd fan to cool your EBB SB2209/2240 use HyperToxic's guide to add that 3rd fan, pinout on the…
Low profile housings for old school DB style connectors, with a variety of holes for cable sizes. They snap together and don't need any nuts or screws. The numbers in the variations are the intended cable diameters, in millimetres.…
Print with Brim and 100% infill. I used carbon filled PLA. Optionally add magnets (6mm diameter, 3mm height): Standard size (¼") bit adapter: Insert the magnet after print. There is a press fit slot inside. Push hard to get it in. Mini…
Remixed version of @MikeF PUG Mount for BTT 2209/2240 - now it fits the bulkier and longer plug that BTT ships with newer boards.
MDT Inspired buttstock, to be used on a Savage B22 Precision rifle. Or modify it at your will to adapt it on any rifle. Main stock body uses 2 M4x20 screws with 2 M4x6x6 insert Use a M10x80 hexagon socket screw and M10 nut for the…
In order to cool my SB2040 canbus-board (with extruder-driver onboard) I used to have a 30mm fan cover sitting on my Clockwork2 extruder. Now switching to Galileo2, noone seems to have designed such cover, only for smaller 25mm fans…
The Boeing B-29 Superfortress is an American four-engined propeller-driven heavy bomber, designed by Boeing and flown primarily by the United States during World War II and the Korean War. Named in allusion to its predecessor, the B-17…
Modified cover to extend further forward to help resolve the wire pinching for the voron tap. Main body for the CW2 needs to be replaced. Based of 3D SB2209, and SB2240 should also work with this modification. The modification uses a 30X7…
This is a model of the B2 Spirit bomber. It has no moving parts or landing gear.
A 2 parts mount for people using BTT SB2240/SB2209 CAN Bus board that are also using PG7 for strain relief. I didn't want a bend in my cable, so I made this from scratch. Note: I do not use a cable cover (didn't want extra weight) so the…
Print the front face together with the accents! Use supports for the door assembly (this is the most critical part!). Some thread inserts are also needed (see photos). I uploaded the CAD-files, so you can use them for modifying or…
Note: This is for the original CAN cable that BTT shipped, with a small rectangular plug. They've started shipping a different cable with a different plug shape, which this STL is not compatible with. The existing PUG mount doesn't work…
As there were no available mods to fit sb2040 with lgx lite I modified the standard stealthburner body and LGX Lite mount to fit together. Inspired by standard Stealthburner https://github.com/VoronDesign/Voron-Stealthburner and lgx lite…
This is for the original version of the CW2 main body, won't fit BTTs variant.
This is an under desk, under shelf or wall mount you can use with the Bluetooth 2.1 Amp ZK-TB21 that I purchased from Amazon. I built mine with the included metal casing on the amp as well, but I guess you could leave that off if you…
Printed with standard Voron settings the cable tie is also needed to secure the cable to the mount.
Different take on CANbus cable strain relief using PG7 Gland. Intended for newer BTT Toolhead boards with thicker connector. For those who want lower and centered mount. Although routing the cable is a bit finicky. Added cutout version,…
Printed standing up with no supports. Compaired to other models this one is very fast to print and does not use much plastic at all but still locks in place.
Remix to add support for the connector as well.
Double-sided mini straight rail compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini…
Remixed from 2 items, thanks to those users for their starting points! https://www.thingiverse.com/thing:4094861 https://www.printables.com/model/251514-noco-battery-jump-starter-mount/files I wanted to make a hard case for my NOCO GB20…
based on a B2 plane I scaled it to 90% to fit it on my build plate - took roughly 1 hr 45 to print no support, no brim, 15% infill, PLA+ used. printed with an ender 3 neo
J'ai trouvé ce mod très intéressant pour ventiler le SB2040 sur le Stealthburner, qui montait très vite en température (environs 85 degrés). Le concepteur du projet de base parle de 60 degrés après installation. Avec la modification je…
2.5D Framed Blueprint | B29 Superfortress Print-in-place card Download the .stl file and slice/separate the parts using Tinkercad or blender if your Printer is too small! WARNING: CHOKING HAZARD - Small parts Not for children under 8 yrs.…
The super cute and awesome B2EMO droid from Andor Printed in 0.2 layer 0.4 nozzle Scale the parts to youre wish, this one was printed at 200% recommend atleast 200% (with 0.2/0.4) or bigger. you can print the red and metal parts…
A remix of JaredC's Galileo 2 Cable Door and Alexander's SB2040 CW2 fan cover door I use HyperToxic's wiring schematic to have my CAN PCB Fan turn on when the extruder is used, Info is in his github…
Maintain a unique style of Stealthburner. No screws reguired.
I made a simple housing for the ZB2L3 battery capacity tester. It contains ZB2L3 circuit, resistors and the 18650 battery holder. There's also enough space to add a little heatsink block on top of the resistors. Only "Resistor Vent.…
CW2 Main body for use with the BTT EBB SB2209/RP2040 canbus toolhead board. Dual filament sensors for use with the ERCF. Updated 9/23/25 New and improved EBB fan housing, way more room and improved air flow. Fixed the tight limit switch…
Tool for remove the XH 2pin connector nozzle heater of centauri carbon Updated (16Feb26): Added New puller for ZH 2pin with printed spring. Updated (15Jan26): Added New puller for XH 2pin with printed spring. This version prevents the…
Strain relief using a ziptie for Galileo 2 (G2E) extruder and SB2209 or SB2240 canbus board.
Summary These are very truth to the original design adapter für 4mm or 6mm (¼ Inch) standard bits. Made one 4mm version and two 6mm versions, one with and one without a 6x3 magnet slot. If u need help getting the magnet in after printing,…
This model has the followinnf features: CPAP mount (2 heat inserts on StealthBurner + CPAP connector) Nozzle Cam support with PCB mount on the right side of StealthBurner face + special cut to handle nozzle cam FPC BTT KNOMI BTT CanBus…
It seems that some people are getting a CAN cable with larger overmolding that doesn't fit the mount included in the EBB SB2209 repo. This is not a perfect fix, but it's good enough. I've included STEP files for remixing!
This is 19 inch rack mount for MikrotTIk router RB260GSP . There are 8 parts that need to be printed. Parts named 19-plug and 19-switch clip are not necessary. If printed part named 19-plug must be printed twice. I printed parts in PETG,…
This is a cable door for can bus(mellow fly sb2040). This is still a work in progress, but am uploading current step and stl for anyone to modify. There is a version already on printables for a 30x30x7 fan, but most people would have…
Printer: Creality Ender 3 V2 NEO Filament: eSun PLA+ Orange Tailored for home and small office environments, this design incorporates additional options for mounting Mikrotik desktop devices on your network rack. If you have a design in…
The lower part of the Battery housing for my drill broke. I designed this to replace it. Its not perfect, but does the job.
This model is supposed to look pretty close to the original casioak resin case. If you need to replace it or just want to experiment with other materials and colors, this is for you. Just print it on its face. With good settings it is a…
Please click if you appreciate my work : ) A throwback to chrome bumpers and honest engineering. This 3D printable wall-mounted sculpture of the Audi 80 B2 pays tribute to a true German classic of the 1980s. The boxy, iconic silhouette…
Update: added latest Stealthburner stable version Connected to FAN2 5V and gpio15, my klipper settings: [controller_fan sb2040-fan] ## SB2040 5V fan pin: sb2040:gpio15 kick_start_time: 0.5 # full speed to spinn of fan fan_speed: 0.9…
Add 3007 fan and ventilation for your can board. I found other hex-holed remixes weak at the door edges and the holes messy to print on my non-voron printer in ABS. This is remixed to retain some strength instead of going super mesh holed.
this compressor its realy slow to fill up my large padleboard. so i create a modification from this model to able to connect to a nother side to compressor. it is able to fill up my padleboard wery quickly and after i use the original…
Modified cable cover to hold a 3010 or 3007 Fan. One with a grill, one without.
*this is for the newer design cable for BTT SB2209 RP2040 Used to stiffen the can bus cable at the tool head side. **print with supports on the usb C part the long arm doesnt need it. print using PIF settings Use 2 zip ties please leave ⭐…
I saw my EBB toolhead driver was getting up around 90C! So something had to be done ASAP! I took BTT's EBB door and put the classic Hexagon “Bestagon” on it to make vents. One is just vents the other has mounts for heatset inserts and…
This is a multipurpose mount designed for the BigTreeTech EBB SB2209 USB 1.0. The EBB SB2209 USB comes with a small USB to CAN adapter. I was not able to find any suitable mounts for this small chip and thought I would try my hand at…
This is an updated version of the latest step files from BigTreeTech to fit the latest step files from Voron. The rest of the files needed to assembly the Voron Clockwork2 for the Voron Stealthburner can be found on the Voron Github.
Für meinen Werkstattsauger Parkside PPWD 30 B2 (auch für PPWD 30 A1) habe ich einen OSVac Adapter F32 für den originalen Anschlussstutzen erstellt. Gedruckt mit Sovol SV06 (Düse: 0,6mm / Layerhöhe: 0,2)…
This is a remix of https://www.printables.com/model/348581-voron-stealthburner-lgx-lite-mellow-sb2040 to replace the 5015 fan with a CPAP hose for part cooling. This model only includes parts for the Stealthburner's face. You can get the…
Use with the CW2 cable bridge.stl from BTT. Too big to work with the regular cable cover so i added a cutout. You'll have to print it with supports. Add two M3 heat-set inserts into the clamp. Secure with M3x16 screws (or longer, but they…
I needed a more low profile mount for the DS18B20 to place it inside my enclosure without it interfering with the 3D printer. This design does just that, allowing me to access the printer without the thermometer getting in the way. You…
Found the 3m0 nozzle camera cpap. i didnt need the camera part. also modified tube to be centered removed hex.
Clamp for connecting DS18B20 to 15 or 22 mm pipe. Used for temperature measuring heating radiator. Best to print with ABS or PETG because of temperature used for the heater. Category: Electronics
Batteriehalter aus altem Batteriepack einer Lichterkette ( nur die Pole verwandt ) Der Halter ist für Bananen Buchsen vorgesehen mit 4mm Gewinde, Damit kann man eine 18650 Zelle testen oder auch Laden. Die Batteriepole sind auf eine…
All the models I could find that used " PG Cable Gland M12 " for the SB 2240/2209 CANBus cable and worked with the Galileo 2 Extruder didn't work as expected. Some had a design flaw that caused more stress on the cable than relief; others…
Front face for Stealthburner incorporating the following: BTT KNOMI Rapidio UHF 3DO Nozzle Camera LGX Lite SB 2209/2240 Remix of Stealthburner + KNOMI + 3DO Nozzle Camera + Rapido UHF by Baze & Stealthburner /LGX Lite/EBB 2209 by…
Cover for 25x25x7 mm fan Connected to FAN2 5V and gpio15, my klipper settings: [controller_fan sb2040-fan] ## SB2040 5V fan pin: sb2040:gpio15 kick_start_time: 0.5 # full speed to spinn of fan fan_speed: 0.9 #reduce speed to 90% heater:…
This is an updated version of the latest step files from BigTreeTech to fit the latest step files from Voron. The rest of the files needed to assembly the Voron Clockwork2 for the Voron Stealthburner can be found on the Voron Github and…
