Wyniki wyszukiwania: belkin

Sortowanie

106 modeli

P
PrintablesTrevor Harrison

Belkin 12 port power strip holder

Holds a Belkin 12 port power strip by the mounting holes as well as clips

Pobrania
244
Polubienia
40
Ocena
5
P
Printableshuntingrarebits

Belkin 12-port power strip holder for Underware

This is a mount for the 12-port Belkin power strip using the Underware system. This clips on to the power strip and uses the strip's mounting holes as in Trevor Harrison's original version. This version adds ample threaded attachment…

Pobrania
225
Polubienia
38
Ocena
5
P
PrintablesProjectsByBrian

Belkin Power Strip Bracket

Simple Belkin Power Strip Bracket. Print one Small and one Large. They go on opposite ends of the power strip. Category: Computer

Pobrania
210
Polubienia
31
Ocena
4,75
P
Printableslink270

iPhone and Apple Watch charging station using Belkin MagSafe compatible charger.

I wanted a charging station for my iPhone and Apple Watch, but the ones I liked were pretty expensive. So I thought it'd be a good idea to get a regular MagSafe charger and 3d print my own, but even the MagSafe chargers from Apple cost…

Pobrania
194
Polubienia
26
Ocena
0
P
PrintablesValentin Jimeno

Belkin SurgeStrip holder

Layer height: 0,32 Infill: 15% Perimeters: 4

Pobrania
171
Polubienia
15
Ocena
5
P

Belkin Thunderbolt Dock Desk Mount

This is a simple under-desk mount for the Belkin Thunderbolt 3 Dock. It can be attached to the desk with 2 screws per side or some adhesive. Since the dock gets quite hot, I recommend printing this in PETG or something else more…

Pobrania
129
Polubienia
8
Ocena
5
P
PrintablesGumbert

iPhone Stand with Integrated Wireless Charger (Belkin F7U054)

A simple phone stand that should fit most mobile phones and integrates the wireless Belkin charger F7U054. Print instructions Printed in PETG, 0,2mm, supports & brim.

Pobrania
128
Polubienia
19
Ocena
5
P
PrintablesJan

MagSafe Mobile Phone Holder for Smart 451 with wireless Belkin Charger

Since a while I was searching for a decent mobile phone mount for my Smart 451 EVs. This design holds any phone with MagSafe just below the navigation system for easy access. With wireless charging no fumbling with cables needes.…

Pobrania
99
Polubienia
15
Ocena
0
P

Belkin wireless charger phone stand

a phone stand that holds a Belkin wireless phone charger i designed this so i could charge my phone and look at it at the same time. this fits my Samsung 20fe and will not fit short phones, mine fits a 200 ish mm phone. i will make…

Pobrania
97
Polubienia
4
Ocena
0
P
PrintablesEvaMika

Belkin Extention lead wall mounting brackets.

Very good surge protected extension lead, unfortunately no fixing holes to wall mount it. Here's my quick attempt to design some brackets for it. Hope you find it useful. Please let me know if any adjustments are needed. Designed for 0.4…

Pobrania
92
Polubienia
5
Ocena
0
P
PrintablesYVR3DPrints

Belkin MagSafe wireless charger stand

Hey everyone, YVR3DPrints here with another model. I use it with my iPhone 13 which works wonders, this allows for rotation on the stand while charging so you can take advantage of StandBy smart display. Printed on PETG, 3 Walls, 5%…

Pobrania
90
Polubienia
5
Ocena
0
P
Printableskvn5x4

Belkin 12-Outlet Surge Protector Mount - Opengrid

Surge Protector: https://a.co/d/fYFFCJW Note, you will need to remove the provided cable organizer on the surge protector to fit this design. Print both items to complete the mounting.

Pobrania
77
Polubienia
4
Ocena
0
P
Printablesljhms

Holder for Belkin BoostCharge Pro 4-Port GaN Charger 108W

This is a simple mounting bracket for the Belkin BoostCharge Pro 4-Port GaN Charger 108W USB charger with two screw holes to hang it up on a wall. Changelog: 2024-10-16: Updated the .fcstd for Freecad v1.0 to fix broken reference geometry…

Pobrania
72
Polubienia
1
Ocena
5

Belkin Pro Thunderbolt 4 Dock mount

Needed a mount for the Belkin Pro Thunderbolt 4 Dock, to install it under the desk. The dock clicks in place when installed. The bridge acts as a distance block while installing the sides to the desk, and also acts as a lock, where the…

Pobrania
65
Polubienia
4
Ocena
0
P
Printablesjcsh

Phone Charging Stand for Belkin BoostCharge

Charge your phone with the Belkin BoostCharge at an angle for a better view angle at the office. Inclination of the phone will be at 45° portrait. Use a small sized PostIt or something similar to charge the phone in landscape mode. Custom…

Pobrania
63
Polubienia
7
Ocena
0
P
Printablesgeekifier

Gridfinity Belkin Magnetic Charger Module

A 2x2 gridfinity module accommodating the Belkin Magsafe-compatible Qi charger . I designed it to lay flat, so that I could charge both magsafe compatible i-Devices, as well as other gear that does not snap onto the charger (e.g. first…

Pobrania
59
Polubienia
19
Ocena
5
P
PrintablesWilliam Kercher

SteamDock with Port Replicator for Steam Deck Remix for StarTech or Belkin 6-in-1

I really liked the look of Majestyk2k's SteamDock but I already had several hub's in a different form factor. This model is a remix of https://www.thingiverse.com/thing:5422982 You will need either a 90 or 180 (u shaped) USB adapter. I…

Pobrania
59
Polubienia
8
Ocena
4
P
PrintablesMATARO

Mobile Holder for Car Belkin BoostCharge

I've found that the only Magsafe car holders for phones are the ones that attach to the Vent, so I've been looking for a way to use them. PETG will deform in summer, so we recommend printing with ABS. Nut files have been added.The right…

Pobrania
58
Polubienia
8
Ocena
0
P
Printablesskreimeyer

Pegboard Mount for Belkin Power Strip

This is a simple design that slips into the holes for mounting screws in the back of the outlet and can then be fit into 1" pegboard. This is an early design which could be improved, but it works well enough for me. Print Details: PLA…

Pobrania
58
Polubienia
6
Ocena
5
P
PrintablesJaSi

Belkin Thunderbolt 3 Dock Pro table stand

Belkin Thunderbolt 3 Dock Pro stand which can be mounted on table and provide more stable experience during use.

Pobrania
57
Polubienia
4
Ocena
0
P
PrintablesFaerro

#Gridfinity 3x4 Belkin wireless charger holder

A nice and dedicated place for charging your phone. The pad is a bit to big for a 2x4 design, but this give the charger and phone a nice space to do their thing.

Pobrania
56
Polubienia
9
Ocena
0
P
PrintablesMichael Whitley

Belkin USB Hub DIN Rail Mount

Mounts a Belkin 4 Port USB Hub (F4U058) to a DIN Rail. The bracket is reversible so the power and host USB cables can be mounted either on the right or left side. Print two DIN clips and install 4 M3 x 4mm x 4.6mm heat set inserts into…

Pobrania
56
Polubienia
9
Ocena
0
P
PrintablesPeter H

WALL MOUNT FOR BELKIN USB HUB

Here are a pair of simple mounts to allow wall or underdesk mounting of the above belkin hub. I've printed mine in PLA with a 0.4 nozzle and any setting will do depending on the finish you want to achieve.

Pobrania
55
Polubienia
10
Ocena
0
P
PrintablesJakub H

Belkin Thunderbolt 3 Express Dock holder

Holder for Belkin Thunderbolt 3 Express Dock. Can be mounted under the table or on the wall. I made legs like this for easier work with the screws. Simple straight extender or thin screwdriver can be used without problems.

Pobrania
50
Polubienia
2
Ocena
0
P
PrintablesAniC

Multiboard Belkin Power Strip Mount - Multiconnect

This is a mounting clip for the Belkin Essentials Surge Protector. It lets you attach the surge protector to your Multiboard setup using the Multiconnect system by David D. You can use as many clips as needed to support the full length of…

Pobrania
48
Polubienia
7
Ocena
0
P
PrintablesGato

Belkin Wireless Charger

This is a stand for the Belkin wireless charging station: "BOOST↑UP™ Bold Wireless Charging Pad 10W for Apple, Samsung, LG and Sony". See: https://www.belkin.com/us/p/P-F7U050/ Quick and easy to print with no support. It offers a place to…

Pobrania
47
Polubienia
4
Ocena
0

Charger dock for iPhone 13 and Apple Watch (Belkin)

Inspired by the original model from Scott Yu-Jan in Maker World.

Pobrania
46
Polubienia
6
Ocena
0
P
PrintablesNightGecko

Mount for Belkin KVM switch

Designed this model as an alternative to the Belink F1D008 mount, because I could not find any of them anymore. It was specifically designed to fit my F1DN204KVM-UN-3 and my not work with other versions switches (especially the shorter…

Pobrania
46
Polubienia
7
Ocena
0
P
PrintablesJohn Carroll

Belkin BoostCharge Pro Holder

I use my laptop in bed, a lot. I needed a way to mount a Belkin BoostCharge Pro Charging Station to the back of my night stand to give me a power source close to bed to charge my laptop and other devices. So I created this model because I…

Pobrania
45
Polubienia
0
Ocena
5
P
PrintablesChris Flynn

Belkin Power Strip Mount for openGrid/underware

This is a remix of an existing multiboard underware project to instead mount using openConnect to openGrid/underware. I've included mounts for the Lite version (which is what I use) but you could easily mount to the full version. I've…

Pobrania
44
Polubienia
3
Ocena
0
P
PrintablesDavid_KM

Phone holder for iPhone 12 Pro with Belkin Inductive Charging Pad

This is a simple holder for an iPhone12 pro in an Apple (silicone) case and a Belkin Boost-Up inductive charging pad (F7U054). It holds the phone at a 75 degree angle and holds the charging pad in the right place to charge the phone…

Pobrania
41
Polubienia
5
Ocena
0
P
PrintablesArgo

Belkin extension cord desk mount

Mount for Belkin extension cord. Additionally you will need: 4x 5mm diameter screws to attach the mount. Cable ties for managing cables

Pobrania
40
Polubienia
4
Ocena
0
P
Printablesjayzee

Belkin 3 in 1 Wireless Charger Stand

this is for the 3 in 1 Belkin charger wanted to have visibility of the standby alarm clock no supports needed

Pobrania
37
Polubienia
2
Ocena
4
P
PrintablesheyItsDubbleA

Belkin Pro Mount

Preface First things first this was built for the following dock. This will most likely not fit any other Belkin dock offering.…

Pobrania
36
Polubienia
2
Ocena
5
P
PrintablesFrank Blom

Headband for soundform mini (belkin) AUD002

Print it with the closed side down, the groove for the cable must face up. Use supports!!! I printed it at a bambulab with .16 layer height and .4 nozzle. I used ASA, but petg should also work. PLA breaks

Pobrania
36
Polubienia
5
Ocena
0
P
PrintablesAndreas Gohr

Belkin USB Hub Mount

This is a simple holder for the Belkin 4-Port Ultra-Slim desktop Hub (Product Number F4U038). The holder can be screwed on somewhere and the Hub simply snaps in. Update (2013-01-10): I updated the holder to be 2mm higher and thus having a…

Pobrania
36
Polubienia
1
Ocena
0
P
PrintablesBD3D, LLC

Wall Control - Belkin Power Strip Holder

Printing Instructions Print two centerpieces with 100% infill and higher wall layers. Wall Control - Belkin Power Strip Holder Center Print two of each: 3x0 Flat Right 3x0 Flat Left Post Print Orient the pieces so that the nubs are…

Pobrania
36
Polubienia
8
Ocena
0
P
PrintablesLU_technic

Belkin induction pad charging support

Belkin induction pad charging support

Pobrania
35
Polubienia
3
Ocena
0
P
Printables008 LAB

IKEA SKADIS BRACKET TO SUIT BELKIN POWER STRIP

Support bracket to hold a 4 plug BELKIN power strip to an IKEA SKADIS organisation system. Needed a way to hold the 4 plug belkin power strip to an IKEA SKADIS board, couldnt see one so modelled it myself. For reference, the skadis side…

Pobrania
33
Polubienia
7
Ocena
0
P
Printablesjak0lantash

Belkin SurgeStrip holder (single row)

It's a little snug, but it fits a FR extension lead (single-row). I suspect it fits a UK one too.

Pobrania
31
Polubienia
1
Ocena
0
P
PrintablesForrest

Belkin rt3200 Router Wall Mount

This is a slide in router wall mount for the belkin rt3200, a very inexpensive and popular router for openwrt. It's a vertical mount, so the router either slides in right side up or upside down. It would work sideways also, but the router…

Pobrania
31
Polubienia
1
Ocena
5
P
PrintablesFaceHaver

Corsa D Cupholder hook for 28mm tube/Belkin phone holder

Print on its side, the flat side. Hook to attach my phone holder to the cupholder. This enables me to have it to hand whenever I need it, while still being able to use cupholders and keep it out of other storage areas. I have a Belkin…

Pobrania
30
Polubienia
3
Ocena
0
P
Printablesdshearon

Verticalizer for Belkin 3-in-1 MagSafe Charger

I wanted to use Standby mode in iOS 17 but had a lay-flat Belkin charging station. I resolved the issue using SCIENCE!

Pobrania
29
Polubienia
4
Ocena
0
P
PrintablesEvan000

Belkin PowerHouse Charging Dock to Type C Adapter

This is an adapter for the Belkin PowerHouse Charging Dock. This model allows the use of a Lightning to Type-C adapter so that you can continue to use your dock. I used these Lightning to Type-C Adapters from Amazon ( LINK ). I printed…

Pobrania
29
Polubienia
1
Ocena
0
P
PrintablesJLS

Iphone 12 Mini + Belkin Wireless Charging Pad 10W

We know that the better the alignement between the charging pads, the better and faster the charging, with this in mind, and tired of missing charges because of misalignement of the phone over the pad, I decided to create a pad that…

Pobrania
28
Polubienia
1
Ocena
0
P
PrintablesMsLegallyOtaku

Belkin 12 port Surge Protector Power Strip version with ethernet/coaxial ports for multiboard

revised for the Belkin 12-port surge protector variant that includes Ethernet and coaxial pass-thru b/c it's thicker

Pobrania
28
Polubienia
2
Ocena
0
P
Printablesdevbloggs

Quest 2 DAS Belking Battery Bank Holder

Remixed of the mount for the HTC Deluxe Audio Strap from Dude_Flash. Modified to fit the Belkin BOOST↑CHARGE 10,000 Mah Battery bank (…

Pobrania
27
Polubienia
1
Ocena
0
P
PrintablesDinol

Belkin AVC006 Steam Deck Dock Enclosure

Converts the Belkin AVC006 USB-C Hub into a fully enclosed Steam Deck Dock. Ran out of good new filament so I used old filament in the pictures (sorry). Tolerances were made for printing at 0.3mm layer height. IMPORTANT! Print the top…

Pobrania
26
Polubienia
4
Ocena
5

MagSafe stand compatible with Belkin MagSafe charger

Wanted a way to use my owned Belkin Magsafe charger along with a base so I dont have to purchase a expensive device also. Print Structions All layers at 0.2, 10% infill, honeycomb. Paint supports below “lower pin” of arm. UPDATE…

Pobrania
26
Polubienia
5
Ocena
0
P
PrintablesArdosch

Belkin USB Charger Holder 108W 4-Port PD Power Adapter

Holder to mount the USB power adapter under the desk.

Pobrania
25
Polubienia
7
Ocena
0
P
PrintablesTodd D

Shim for a Belkin Continuity Camera Mount to use on an Apple Studio Display

The Belkin Continuity Camera Mount for Laptops is great, but I wanted to also use it on my Apple Studio display so I designed this simple shim. Just slide the mount into the slot and put on your display. If you want to modify the mount…

Pobrania
25
Polubienia
2
Ocena
5
P
PrintablesFistoWutini

Belkin Boostcharge Tertial mount

Arm: Ikea Tertial work lamp. Remove the lamp housing. Charger: Belkin magsafe charger model WIA004ttBK. Hardware: 2x M3 screws, 2x M3 nuts. Print standing upright to keep inner surface as smooth as possible. I recommend printing with…

Pobrania
24
Polubienia
5
Ocena
0
P
Printablesrosal02

Magsafe Mount for Phones without Magsafe Support for Belkin

I had the Belkin Wireless Charger but an older phone. It supported Wireless Charging but didn't have Magsafe (makes possible to hold to Phone in Air to the charger and perfect aligned). So I designed this model. It fits perfectly and the…

Pobrania
24
Polubienia
5
Ocena
0
P
Printablesych003

belkin 2 in 1 apple watch charging add-on

Make your Belkin magsafe 2 in 1 charging stand a 3 in 1, for those who bought an apple watch after this stand like me. Gotta really squzze it in but be careful don't break the wire behind the steel bar. Print Settings Printer Brand:…

Pobrania
23
Polubienia
5
Ocena
0
P
Printablesmaze

Dual Belkin Thunderbolt 3 Pro dock

Dual Belkin Thunderbolt 3 Pro dock, to house two of these docks neatly on the desk

Pobrania
22
Polubienia
1
Ocena
0
P
PrintablesKoumak

Belkin usb hub HSW holder

holder for usb hub for your honeycomb storage wall. Cut it in the middle and print standing. printed in pla, 0,28mm. Perfect fit.

Pobrania
22
Polubienia
4
Ocena
0

ExotiCar ver. "B" - exotic car-inspired Wireless Phone Charger for Belkin BoostUp Wireless Charging Pad 10W

This short video shows the easy assembly: This exotic car-inspired wireless phone charger holder (one of a set of two body choices) is designed for the Belkin Boost Up Wireless Charging Pad 10W, which is compatible with: Qi phones iPhone…

Pobrania
21
Polubienia
12
Ocena
0
P
PrintablesEMN

Belkin 10w bedside charging stand

A bedside stand for quick charging overnight. The angle of the phone is 6 degrees, so it's ideal for a bedside clock. This works with a Samsung S21 with or without a case, so I'd assume that any other similar sized phone would work too.…

Pobrania
21
Polubienia
0
Ocena
0
P
PrintablesPapaYankee

Belkin SurgeMaster holder

A small contraptin to affix a SurgeMaster to a cabinet, table or drywall. You will need 4 M3 16mm (or longer) bolts and nuts 4 M3/M4 screws Just screw the bottom part to your table/cabinet/drywal, insert the SurgeMaster, and screw the top…

Pobrania
21
Polubienia
1
Ocena
0
P
Printableslittlekev

Belkin Inductive Charger Stand

A Stand for Belkin inductive Charger

Pobrania
20
Polubienia
4
Ocena
0
P
Printablesm-arx

Belkin Car Vent Mount PRO with MagSafe to four hooks adapter

I really like the MagSafe mounting idea from Apple and bought the Car Vent Mount PRO with MagSafe from Belkin when it came out. But after a while the fact that it hangs on my vent kind of bugged me. Also, in my car (a VW), I have a…

Pobrania
19
Polubienia
2
Ocena
0
P
PrintablesRobbo

Belkin Boost Up (repair)

A friend of mine broke the legs of his Belkin Boost Up Qi charger, so I made him a new mount. I build it using basic shapes in PrusaSlicer. You can edit dimensions or shape in the included original 3mf file if you want to. It currently…

Pobrania
19
Polubienia
0
Ocena
0

ExotiCar ver. "A" - exotic car-inspired Wireless Phone Charger for Belkin BoostUp Wireless Charging Pad 10W

Some prefer their nighttime / sleeping time phone charging position to be flat, with a dark screen. This design is for that. See my other design for those who want to see the standby mode options such as clock or calendar, etc. This short…

Pobrania
18
Polubienia
12
Ocena
0
P
Printablesdr_traktor

Belkin Wireless Charging Pad 15W cradle for Pixel 9 Pro with case

This cradle is specifically for the Belkin WIA002BTBK wireless charging pad https://www.belkin.com/in/p/wireless-charging-pad-15w/P-WIA002.html , and the Pixel 9 Pro in the official case.

Pobrania
18
Polubienia
0
Ocena
0
P
Printableszsohn

Tilt Stand for Belkin Boost Wireless Charger

This is a Tilt stand hold and align an iPhone 12 Pro Max with a Belkin "Boost Charge" Wireless Charging Pad 15W (model number WIA002). It is best connected with some right angle usb-c adapters. This stand holds the phone at a 60 degree…

Pobrania
18
Polubienia
0
Ocena
0
P
Printablesatom2ueki

"Click" Belkin economy socket extension wall mount

The model designed with 2 ways fixed slot, you will hear a confirmation "click" sound once it slide to the correct position You can easily detach the power extension with this accessory Printing friendly, the model dedicated designed to…

Pobrania
18
Polubienia
2
Ocena
0
P
PrintablesPlutonium7276

Belkin Hub under desk mount

Under desk mount for the Belkin USB Hub (Model# F4U090). Slide it in from the front and its a snug fit so wont come out when you unplug something. Needs 2x 30mm (or longer) screws to mount it to the desk.

Pobrania
17
Polubienia
4
Ocena
0
P
PrintablesIlia B

Pixel 3 wireless charging holder for Belkin

The Belkin Wireless Charger 10W is great for my Pixel 3, however I find I can accidentally place the phone off-center, and then it charges slowly and gets hot, or doesn't charge at all. Hence I printed a part to fit the phone. The…

Pobrania
16
Polubienia
1
Ocena
0
P
PrintablesShabubu

Belkin Power Strip Pegboard Mount

I have a pegboard mounted behind my tv stand to help with all the cable management and made this holder for the Belkin Power Strip. Feel free to tinker: https://www.tinkercad.com/things/jXFLYHCr4qL-belkin-power-strip-pegboard-mount

Pobrania
15
Polubienia
0
Ocena
0
P
PrintablesDakrat

Belkin Star Wars phone charger

I saw a Star Wars Stormtrooper charging stand that I thought was cool but I had a wireless Belkin charger so I thought I could remix a few items to make my own. Category: Mobile Phone

Pobrania
15
Polubienia
1
Ocena
0
P
PrintablesRod Gregg

Pixel 10 Phone Stand that holds Belkin Magnetic Wireless Charging Pad Qi2 15W w/Kickstand

Face plate slides together holding Belkin pad in place. The stand is made to stand straight up or at an angle. No glue required. https://www.amazon.com/dp/B0F8LMHB64?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Pobrania
14
Polubienia
3
Ocena
0
P
PrintablesNuno

Belkin RT3200 Support

Print two of these. These are to be used with Belkin RT3200 installed upside down, suggest using double-sided 3M tape.

Pobrania
14
Polubienia
0
Ocena
0
P
Printablesdrandolph

Belkin Universal Media Reader mount for iMac and and Apple Monitors

Simple slide on mount for a Belkin Universal Media Reader on the new iMacs or new thunderbolt or LED monitor. Instructions Slide the reader in and plug in the USB. Simple Category: Computer

Pobrania
14
Polubienia
1
Ocena
0
P
Printablesjcamping

Belkin Under Desk Power Strip holder

Vertically mount your metal Belkin power strip under your desk

Pobrania
13
Polubienia
1
Ocena
0
P
PrintablesDorffMeister

Belkin Gray 12 Plug Power Strip Hangers

I wanted to hang a Belkin, Gray, 12 outlet power strip on the back of my entertainment center. The unit has a 4.5mm plate running across the back. My design hooks into this plate. You use the Wide Hanger at the fat end near the power…

Pobrania
13
Polubienia
2
Ocena
0
P
PrintablesGilatrout

Belkin OmniView KVM Cables Relief

Take youself back to 1990 and you want to save room on your desk for another computer. The solution is a KVM. The problem is KVM cables for the Belkin OmniView KVM are not bundled together and make cable management an absolute nightmare.…

Pobrania
13
Polubienia
0
Ocena
0
P
PrintablesAndrew

Belkin 3-1 wireless charger adapter for Z Flip 5/6

Needed an adapter to be able to charge my Samsung Galaxy Z Flip 5 on a Belkin 3-1 wireless charger.

Pobrania
13
Polubienia
3
Ocena
0
P
PrintablesTT ._.

Belkin 8 Outlet Underware / Multiboard / Multiconnect Mount

Was a really quick model I made so i could mount my strip, Huge Thankyou to Valentin Jimeno for the holder I used. Make sure this is printed on its side, and use grid supports as shown in the photo The Larger side is quite tight for me,…

Pobrania
12
Polubienia
5
Ocena
0
P
PrintablesAdam

Belkin KM Mount

An under desk mount for the Belkin Advance Secure 8-Port Keyboard/Mouse (KM) Switch (P-F1DN108K-3)

Pobrania
12
Polubienia
0
Ocena
0
P
PrintablesSeth Bowen

Belkin USB Hub basic wall mount F5U237

Super basic wall mount for a Belkin USB Hub F5U237. It works, it isn't perfect but it is an early design of mine. Category: Other

Pobrania
12
Polubienia
2
Ocena
0
P
PrintablesJonathan Chang

Belkin's "iPhone Mount with MagSafe for Mac Desktops and Displays" Tripod Stabilizer

The mount is quite flimsy in tripod mode as the joint has a ton of flex. So I've made an adapter which eliminates the wobble by keeping the joint shut!

Pobrania
12
Polubienia
0
Ocena
0
P
Printablesnerdwa

Belkin Boost Up Booster (BU001)

My iPhone 13 Mini was too short to work with this wireless charger so I made a simple thing to boost up my phone so it can wirelessly charge. I could just put my phone horizontally across but I did not want to do that so I over-engineered…

Pobrania
11
Polubienia
0
Ocena
5
P
Printablesalvaro Diez

Cargador inalámbrico 3 en 1 de Belkin con carga MagSafe oficial de 15W

Modelo Soporte para base de carga Magsafe 3 en 1 Belkin Black 15w y compartimento para guardar accesorios. Apague el ventilador auxiliar. El archivo predeterminado con un relleno del 15% está bien, pero debe apagar el ventilador auxiliar.…

Pobrania
11
Polubienia
0
Ocena
0
P
PrintablesDigitalArk

Stand for Belkin F6C550-AVR UPS

I have a Belkin F6C550-AVR sitting on a wheeled cart. The UPS can fall over sideways sometimes. This is designed to fit the feet of the UPS and has sides to prevent the UPS from tipping over when moved quickly. This was printed in PETG…

Pobrania
10
Polubienia
2
Ocena
0
P
PrintablesBDW

belkin anti-vibration ring

The belkin smartphone suction cup mount is a nice design, though it has the tendency to woble when driving on rougher roads. This ring can be wedged between the tightening ring and the mount making the connection stiffer and…

Pobrania
9
Polubienia
1
Ocena
0
P
PrintablesPandemonium

Belkin Wemo Stage Scene Controller Deep Wall Adapter

The original wall plate adapter for the Belkin Wemo Stage Scene Controller is not deep enough and allows the scene controller to easily fall out if jarred. This deeper wall plate adapter allows the switch to sit flush to the wall plate.…

Pobrania
9
Polubienia
2
Ocena
0
P
PrintablesToadie

belkin f5u404-blk USB 2.0 Switch_Case

A desktop case for the belkin f5u404-blk USB 2.0 Switch. Just as simple as I could draw it in Fusion.

Pobrania
8
Polubienia
1
Ocena
0
P
PrintablesDsk001

Adapter to use Pixel Watch 4 / 5 with Belkin UltraCharge Modular Charging Dock

I purchased the Belkin Modular Charger when I originally was using the Pixel Watch 3 and it worked great. I upgraded to the Pixel Watch 4 and the charger does not have an adapter for it. This adapter uses the original charger that the…

Pobrania
8
Polubienia
1
Ocena
0
P
Printableselectronlove

Belkin USB 2.0 Hub 2020 Mount

I needed a mount for a Belkin USB 2.0 hub, rather than leaving it lying around. The mount is for a 4-port USB 2.0 Hub, Belkin model # F4U040v. Mount to frame with 2x M3 screws and t-nuts. It works! Print Settings Printer: Custom Delta XL…

Pobrania
8
Polubienia
0
Ocena
0
P

Belkin BOOST CHARGE Dual phone frame

Fits the iphone13 and iphone 12. Should fit most other phones that are not huge. I use this thing daily and it has saved me from moving my phone of the charger during the night. It has some holes on the bottom where you can add rubber…

Pobrania
6
Polubienia
0
Ocena
0
P
PrintablesHiddenoctupus

Belkin Wireless Charger f7u054 Wall Mount

This is a wall mount that uses double sided tape to mount a stand for your phone using the Belkin Wireless Charger F7U05 I have an Iphone 13 it works with it I Have to take off the case but i think its just the case. used 20% infill and I…

Pobrania
6
Polubienia
0
Ocena
0
P
Printablesrelaxinbob

Belkin AirPlay 2 simple stand

This is a very simple stand for a Belkin AirPlay 2 player. It was quickly thrown together on TinkerCad, then imported into Fusion 360 to add the fillets. The “slot” is a slightly off center, but good enough for what I needed. I printed it…

Pobrania
5
Polubienia
1
Ocena
0
P
PrintablesJeff Chen

iPhone 12 MagSafe Add-on for Belkin Charge + Sync Dock

MagSafe add-on for Belkin Charge + Sync Dock, since I'm too cheap to throw the old thing out. Tall version allows your phone to float and rotate freely, while short version sits in the dock seamlessly. Choose the one you like. Use M2…

Pobrania
5
Polubienia
1
Ocena
0
P
PrintablesTim

Belkin Thunderbolt 4 Dock Pro MCM Mount

Shroud to magnetically mount the Belkin Thunderbolt 4 Dock Pro to the underside of your desk using LTTStore's MCM system. I wanted my dock hidden but still easily accessible, so I designed this mount to work with the MCM magnetic mounting…

Pobrania
4
Polubienia
0
Ocena
0
P
PrintablesAeroSteveO

Belkin USB-C Multimedia Hub Holder

Designed to work with command strips or wood screws.

Pobrania
4
Polubienia
1
Ocena
0
P
Printablescookiecrook

Belkin WeMo Hub Wall Mount

Remix of a mount by @another_variable on Thingiverse. Substantive changes (open front) to allow unmounting without unplugging, and editorial changes for better printability and fit. Print vertically as oriented in the 3MF, and no supports…

Pobrania
3
Polubienia
0
Ocena
0
P
PrintablesHatingHater

Belkin MagSafe Mount for 2020 Extrusion

This mount allows you to attach a Belkin MagSafe charger to standard 2020 aluminum extrusions (commonly used in 3D printers and DIY frames). Perfect for keeping your phone accessible for monitoring, timelapses, or remote control. Required…

Pobrania
3
Polubienia
2
Ocena
0
P
PrintablesZemoj

Charger Stand for Belkin Qi2 15W

Basic charger stand for the Belkin Qi2 wireless charging puck. "Base" and "Main" are printed separately so you can customize the size and weight you need. I printed the 60mm version with 15% infill and 0.2mm layers. Measure from the…

Pobrania
3
Polubienia
1
Ocena
0
P
Printablesctheroux

Belkin Power Meter Box

This is a box to store Belkin Power Meter Box. Support material is not required. An infill of 20% is recommended. This object's main web page is: https://www.ctheroux.com/belkin-power-meter-box/. This object was designed using openSCAD.…

Pobrania
2
Polubienia
0
Ocena
0
P
PrintablesSimon Hawkins

Belkin SoundForm Adapt Box

A simple box for storing and transporting the Belkin SoundForm Adapt. Designed to use 3mm foam sheets cut to size to line all of the insides.

Pobrania
2
Polubienia
1
Ocena
0