197 modeli
Fern can be seen wearing this in her hair througout the show. There are two versions: Curved - Requires supports. glue on a hairclip and your good to go. Flat - Easier to print. If you are using PLA, you can put it in hot water an and…
Wydruk około 4,83 €–5,91 € nettoWstępna wycena jednego wariantu
The "Voronoi Beyond Sight" sculpture is an excellent piece for 3D printing enthusiasts looking to explore the intersection of art and technology. The model is designed with a Voronoi pattern, a natural pattern that resembles the random,…
Printing instructions This guy, as is often the case, comes in two parts. A main bust part, and a base part, which are printed separately. FDM This one is very simple to print on FDM. You just plop it down onto the bed and print. Just…
My takes on the NPCs and Creatures from The Wild Beyond the Witchlight are unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the…
Frieren's Mage Staff - Sousou no Frieren / Frieren: Beyond Journey's End Red Fabric to wrap around the staff's head is not included. Thread the corner of the fabric through the bead and secure with adhesive. This build fits schedule 40…
Stark's Axe These parts fit onto a schedule 40 1" PVC Pipe. The seven small alignment pins and 2 large axe head threads should be printed lengthwise for maximum strength (I use 6mmx50mm wooden dowels bought off of Amazon). It is suggested…
The "Slimterface" is a DIY facial interface for the Bigscreen Beyond VR headset, created by Sporky on the Bigscreen Beyond discord, later modified by Val to be more universal and give more FOV here is why you would want to make your own:…
(If you find any of my models for sale online (ebay, amazon, etc) it is not me, i do not sell prints; especially not at those insane prices. They are all listed as non-commercial works. I do not have a patreon or kofi or any donation…
A mirrored lotus ring gifted to Frieren by Himmel while adventuring. This is for people who want extra props while cosplaying Frieren or Himmel. Print with Resin and an advance warning that this print will be very delicate. The inner…
This is a model for the batarang used in batman Beyond tv series.
This wall sign designed to be printed using multiple colors and changing them during the print.
quick support-less print to replace your Bigscreen Beyond's cable clip in case you broke it UPDATE 1: -original renamed to V1 -added V2, different clipping style to minimize wear on the cable UPdate 2: -added V2 vertical for better…
Simple but very nice 2d wall art Frieren
The butterfly hair piece that Fern wears. There is a slot for a wire slide comb (purchased separately off of amazon) to fit that holds it to the wig. The suggested type of printer is MSLA resin, but if you use a FDM, I can't stop you.…
Fern's birthday present from Stark while the party is travelling. The mirrored lotus design is traditionally given to one's sweetheart…not that Stark knew of this at the time. This is for people who want extra props while cosplaying Fern…
The official Bigscreen Beyond Audio Strap CAD model data! Useful for designing modifications or replacement parts, or for 3D printing accurate models. (Please remember to refer to your Bigscreen Beyond warranty as certain modifications…
Bigscreeen Beyond Quest 2 strap adapter! what else to say? recommended print settings: -0.2mm layer height -0.4mm line width -3 perimeters -3 top/bottom layers -25~50% infill -"Outer before inner wall" is highly recommended for the best fit
I wanted a smoother version so i created this batarang and when printed twice, use superglue to attached both pieces and your ready to defend Gotham City. Print Settings Rafts: No Supports: No **Resolution:** Fine is better Infill: 20…
Himmel's (replica) Hero Sword - Sousou no Frieren / Frieren: Beyond Journey's End This build uses a piece of ¾" Schedule 40 PVC pipe to attach the Hilt to the Grip . If PVC pipe is unavailable, print the Connector piece. The CloakClasp…
This is a kit I made to make the Vive DAS (Deluxe Audio Strap) useable with the Bigscreen Beyond Thank you @whinnyrab (RockyRob) for images and testing as I'm still waiting for my Beyond to be made. Thanks to @CompatibleVRC for helping me…
This is a remake of the MattHub mount for the Bigscreen Beyond audio strap. The mount backplate is nearly identical to the one bundled with the hub, but my remake features 1.85mm holes instead of 2mm for a stronger fit with undersized…
This print helps you neatly organize the elements of Beyond the Sun , a Rio Grande game. It consists of: A card tray with card separators A player boards tray (stores as well other elements) - Wide part, I have added two files to print it…
This is for people who want extra props while cosplaying Frieren. This prop is a small necklace with fine details. PRINT IN RESIN String a leather cord through the top loop to make it into a necklace.
The face gasket that I got with the beyond put too much pressure on my nose. Also, the eye relief was too large, which limited my FOV. I designed this base and then boolean subtracted a 3D model of my face from it. With this 3d printed…
Funny sign - “WARNING no stupid people beyond this point”, printed in ZIRO PLA Glitter Twinkling Red, ZIRO PLA Twinkling Black, and Sunlu Matte white PLA. Remixed to make it a flush design, as I wanted to print it face-down to get the…
Low Poly Beyond Sight - Sculpture Very nice piece of art in low poly style. Place it to your living space or in your office as eye catcher. You need to print it with supports ;-) Take a look to my models, there you can find two similar…
self explanatory I think! update 1: -renamed things appropriately -added variant with a 8mm round clip for bigger adapters
##### Updated 2023/04/28 ##### Added a lid scaled to 99.6% for those that are having problems with lid tightness Added a player box v 1.5 with words for the compartments and no dividers between the round tokens. ########## Box…
(If you find any of my models for sale online (ebay, amazon, etc) it is not me, i do not sell prints; especially not at those insane prices. They are all listed as non-commercial works. I do not have a patreon or kofi or any donation…
🧩 Features: Compatibility : Designed specifically for Bigscreen Beyond and the Apple Vision Pro’s Solo Knit Band Tool-free installation : Snaps into place without glue or modification Lightweight & durable : Balanced for strength while…
This is an updated version of the ISSCV from Space Above and Beyond (SAAB). It is scaled to 1:45. Total model length 300mm. Features Position-able main engines Added Engine V2 which is high poly and smooth Rear Engine V2 has smooth engine…
Adapter that allows the Bigscreen Beyond or any other HMD with Beyond-style headstrap nubs to use an Apple Vision Pro-style strap and the Valve Index BMR Speakers via the amazing MMI Modular adapters and DAC module. No soldering required!…
A simple organizer for Beyond the Sun with the Leaders of the New Dawn expansion, keeping the original thematic cardboard box insert. The card tray is rather large, so I've also provided a “split” version that should fit on most printers.…
The original model from Scott was amazingly recreated but I needed more room for the USB connector as the "window" wasn't centred and I beefed up the thinnest part of the clip as I needed more strength for the material I was using. Cable…
This insert is designed for Sleeved cards but can fit for "non sleeved" ones. I store games horizontally and probably not 100% vertical storage friendly. Easily printable, no supports, quantities needed are in the file names. 2…
Staff fits ¾" PVC Pipe. If printing the half versions, there are three small pins to help with alighting the two pieces. If printing the staff head in full, these are unnecessary. To assemble the staff head, either cut a 50mm piece of PVC…
Bring the futuristic Dark Knight to your 3D printer with this Batman Beyond–inspired Dummy 13 ! Based on the beloved Dummy 13 format, this remix features design elements drawn from Terry McGinnis’s iconic Batsuit—sleek, angular, and ready…
A quick mount I made to permanently install the Bigscreen Beyond's link box into a cabinet. Has mounting holes for 4 M3 screws.
I really liked Werwerf's insert, but when I printed it on my Bambu labs the lid was too wide (so it bowed up in the center), and the discs didn't fit. I don't know if our printers have different calibration (though a calibration cube was…
This is a generic facial interface for the BSB. You need velcro tapes, 2mm(Diameter)*4mm magnets, and a facial interface with velcro backing(tested with AMVR's pico 4 facial interface).
UPDATE: The dimensions of the board have slightly changed since manufacture has been transferred over to Babble. This case was designed around the first revision pushed out by Matt and from what I understand it will also fit his second…
“Beyond K10 (K-ten)" is a modification kit for EasyThreed K10, a toy 3D printer. This mod increases rigidity and stability of EasyThreed K10 in a very simple way. K-ten means K-point (K点) in Japanese, a reference line to calculate scores…
Wanted to make clear, who is admitted to be in my printer workshop.Wanted to make clear, who is admitted to be in my printer workshop. Two layouts available: 0.6mm deep letters: absolutely sufficient if the base plate is printed in WHITE…
2 simple models to remix to your liking to make your own Bigscreen Beyond headstrap! recommended print settings: -0.2mm layer height -0.4mm line width -3 perimeters -3 top/bottom layers -25~50% infill -"Outer before inner wall" is highly…
Fits nicely in the box and the pieces can be pull out and put on the table. It will fit sleeved cards. Print 4 of the Player Pieces model and 1 of everything else. The Cross model is designed to fit under the cardboard insert that comes…
Tired of waiting for the Halo mount, I made my own. It works, but the added weight makes it less comfortable to me, so I am not actually using it at the moment. EDIT: Added Helmet compatible top bracket See the 3mf/images for print…
I designed some boxes you can use with the original insert of the deluxe version. Player boxes are big enough to put all the components used on player boards (except dice) in it. Neutral box can be stored above dice.
Batman Beyond coaster. Print at .20mm and change filament color at layer 2.20mm
Use your existing Quest 3 strap on your Bigscreen Beyond to get maximum comfort! The mod is simple and snaps right in, you may want to add 2 cable ties per strap point just for insurance but the snap fit with PLA is perfect. Untested with…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
print settings: PLA or PET-G 0.4mm line width 0.2 layer height 50%infill 2 top/bottom layer 2 perimeter no support the hinge just snap in place, engage the left side first and slide the right side from under up until it click in place,…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a model of Batman beyond from the old cartoon show in the old cartoon. There was an episode where he was caught and tied up where he actually was injected with the splice chemical which caused him to be spliced with as a bat, and…
I needed to store my Beyond while I'm not using it, but I didn't like the existing models that had the headset resting on the cushion. Bigscreen is awesome and you can download their CAD data for the Beyond headset. Designing this was a…
This is a mounting bracket for the Bigscreen Beyond Link Box . It's designed to (gently!) smush the link box against whatever surface you're screwing to, so don't tighten down too much! Hardware 4x 3x12mm countersunk screws Suggested…
Does require supports for front row of letters.
Customizable smooth running Thrust Bearing. Parametric Change .. Mount type, diameter, thickness, ball diameter. # of balls, etc Generates a ball retainer and internal raceway Very smooth operation. Use BB's, marbles, whatever.
Two types of kandi, one with a top hole and one with side holes. The bubble and alien refer to the fonts. Bubble is the font for 2024, it looks like alien was used in atleast 2022.
If you're here for a Valve Face Tracker Mounting solution that's nice and sturdy you've come to the right place! Just download the Frunk replacement, swap it for the current one, and then you're good! However if you wish to assemble your…
Simple model, just slice and put a pause to change color at 13 layer Start with white than change to black.
The Golden City arc (my favorite so far as of Spring 2025) features Denken more prominently than in S1 of the anime. This is for that 1 cosplayer! I went with more of the manga design. I cannot wait to see this arc animated! This build…
it was a great approach to practice more about stylized anatomy, the model was entirely sculpted in Zbrush, rendered in Blender and composition made in Photoshop. Completely modeled for 3D printing, it was a great joy to work on this…
This clip moves the cable above the strap for more comfort when using a headrest.
Batarang from the Batman Beyond series
Organizing insert for Tiny Epic Galaxies board game by Pixie Games. Allows to organize the game and Beyond The Black expansion. To be inserted in the game box and the expansion box. Compatible with sleeved cards. The game box can be…
I wanted a simple way to hang the headset on the wall next to my sim rig. Secures using 2 No. 8 screws and drywall anchors. Printed from PLA, 15% infill and no support.
A bowl mould for forming biodegradable material. Designed by Precious Plastic. A mirror of the files from version 4.1 of the download kit. All files are property of Stichting One Army. Additional information on building this machine is…
Frieren: Beyond Journey's End : Bust
Adapter to attatch a fluxpose tracker onto a Bigscreen Beyond HMD. Needs two 4x1.5mm magnets
This is a remix that combines my MattHub Case Mount (lid optional) with the BDMan soft strap mod's snapring, allowing the MattHub to be mounted on the snapring piece. There are 3 versions of the BDMan files, so choose which one you want:…
A heat press for forming biodegradable material designed by Precious Plastic. A mirror of the files from version 4.1 of the download kit. All files are property of Stichting One Army. Additional information on building this machine is…
I designed it for my son, it's fully printable in various colors. Give it a like if you liked it, just knowing that makes me happy. I also added two holes of approximately 11mm by 2mm on the base so you can attach a neodymium magnets.…
I have only printed the “more support” variant as yet, and supported the entire “upper” shelf, with the connectors facing upwards. I made a “less support” version, and had to modify the connector nibs a bit, as well as changing the…
Save space by holding the tray in an upright position when not in use!
Skadis mounting system for Bigscreen Beyond 1/2/2e and its cable based on designs by @JCCustomDesigns and @galvanization_141361. You need to add magnets (see infos on @JCCustomDesigns original post) into the mounting system to let the…
Print it vertically or horizontally, both will look great. Vertically, you can place a light behind it, and the relief will play with light and shadow to create volume. Horizontally, you can add colored filaments to achieve stunning…
Note: This is currently designed for v5.2 only, the v5.1 hub has a slightly different hole spacing so it won't fit as-is This is a case mount to attach the MattHub USB hub to the Index audio strap (or the Beyondex mod). The original…
The inlay fits perfetcly into the original box of Tiny Epic Galaxies expansion BEYOND THE BLACK and offers the following: 1 compartment for all cards of the base game 1 compartment below the cards for your private use 1 round comparment…
5mm & 6mm Radius Corner Cutting Jigs with 1.1mm Alignment Tabs for Easy Cutting of Leather Goods (or Whatever) that I made because I often have to hand cut this 5mm radius and wanted to make it more efficient. Great Radius for Wallets and…
A fun 3D-printed door hanger that reads: “Caution: Trying to poop in peace. No humans or pets beyond this point.” and features a warning-style icon at the bottom. This sign is perfect for (hopefully) keeping interruptions away while…
Extracted and heavily modified for 3d printing this spaceship from the shutdown MMO Earth and Beyond is a challenging print. I've included the model cut down for printing along with joining pins. If this inspires nostalgia you should…
A remix of Precious Plastic's bowl mould for forming biodegradable material to make the model more accessible. The STEP file has been exploded and the components named. I've fabricated a scaled down example with fused filament to…
Print this twice and put it on the Abiie Beyond Junior High Chair for a way to store the try while you get the baby in and out. This isn't super snug, but so far it's stayed put. Print Settings Rafts: No Supports: No Resolution: 200…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A Mount for the Bigscreen Beyond 2 for 4040 extrusions. Requires 2 M8 screws. The original creator provided only an STL file. So the attached f3d file is pretty plain.
Madness - One Step Beyond clock. The clockface is a remix of https://www.thingiverse.com/thing:43815 - Thingiverse seems to have a problem searching for remixes but I want this to have the right attribution. All parts are printed except…
A guide for the latch hook to ensure perfect alignment every time. This is a very specific design for Coachmen Beyond RV's with the sliding screen door (may fit other models with the same screen door). Based on ideas from the Facebook…
To infinity... and the nearest cover save! Bazz doesn't just fight aliens; he outsmarts them with witty remarks and dramatic poses. His armor features a glowing "Star Command" emblem on the chest, retractable jetpack wings (folded for…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
uhm… that VR headset is a better microphone than my old T-bone so uh… here's a mic stand adapter for it easy print, here's my settings: 0.4mm nozzle 0.5mm line width 0.25mm layer height 2 perimeters (1mm wall thickness) 2 top & bottom…
Other clips are too tight or badly designed and scratch the soft plastic of the Frame Strap Cap. This strap clip model has a consistent 0.2mm offset all around, which is my printer's tolerance for a snug fit. I'm only providing the…
A cup mould for forming biodegradable material. Designed by Precious Plastic to work with their Bio Press. A mirror of the files from version 4.1 of the download kit. All files are property of Stichting One Army. Additional information on…
These adapters are made to fit the MeganeX Superlight 8K using the Modular Facial Interface developed by Akari, and adapt it to utilize Bigscreen Beyond style head straps. The source for the main interface is found at their site:…
Extracted and heavily modified for 3d printing this spaceship from the shutdown MMO Earth and Beyond. As the picture indicates I haven't actually printed this one myself yet but based on the others I've made this will be a challenging…
Description This is a 3D printable model based on FERN from Frieren: Beyond Journey's End. Follow me on my social media Twitter: https://twitter.com/FANMADE_NFT Insta: https://www.instagram.com/fanmade3d/
Extracted and heavily modified for 3d printing this spaceship from the shutdown MMO Earth and Beyond is a challenging print. I've included both the full model and a cut version in PrusaSlicer that was printable. If this inspires nostalgia…
Este personaje fue creado apedido de Hunte, les recomiendo que visiten la pagina de TheHunteOfficia1 ya que tiene muy buenos trabajos. This character was created at Hunter's request. I recommend you visit TheHunteOfficia1's page, as they…
This adapter lets you attach Project Beyondex to the Pimax Dream Air. Included a remixed face gasket from Zeeflyboy with a top strap slot. The example photos is using a 1.5ft cable. 1.25 ft would be ideal if you can find one. 1ft is too…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This insert includes: Map tile organizer Cards, clue tokens and extra character tokens organizers (personalized for each expansion) Standing investigators storage Monster boxes NOTE: the expansions Sanctum of Twilight and Beyond the…
