1317 modeli
Screw claw to hold screws in front of the screwdriver. Allows easy and one-handed screwing without the screw falling off the bit. You can support me with a coffee: https://www.buymeacoffee.com/maxwxyz Place the screw claw on the front of…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hello, Welcome to my profile, full of models and miniatures :-) I have for you Hobbits, dwarf, gnome for an exhibition or a diorama. Very nice figures. They are suitable for coloring. My children absolutely love them :-). Important: If by…
Wydruk około 12,93 €–15,80 € nettoWstępna wycena jednego wariantu
A drill bit holder for handy storage on a wall.
Wydruk około 10,97 €–13,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Drill Bits Holder Holder for a total of 23 drill bits with a size from 1 mm to 12 mm in 0.5 mm steps. The holder can be mounted on a wall with 2 countersunk screws. --- Bohrer-Halterung Halterung für insgesamt 23 Bohrer mit einer Größe…
Wydruk około 8,25 €–10,08 € nettoWstępna wycena jednego wariantu
I designed a case to hold every (currently) available screwdriver bit from lttstore.com (with the exception of the bits you store in the regular-sized screwdriver). This case holds 60 20mm bits, AKA the five additional bit sets you can…
Wydruk około 6,83 €–8,35 € nettoWstępna wycena jednego wariantu
This is a remix of figterk 's model to be able to use any rigid filament for those who don't have any flexible ones. I used the Gridfinity compatible model from DSwanlund for the dimensions. The bit holder fits right into the case, but…
Wydruk około 3,34 €–4,09 € nettoWstępna wycena jednego wariantu
x = 140 mm, y = 89.07 mm, z = 126.56 mm
Wydruk około 11,01 €–13,46 € nettoWstępna wycena jednego wariantu
A wood drill bit holder for handy storage on a wall.
Wydruk około 11,14 €–13,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printed with no support and 25% infill.
Wydruk około 4,99 €–6,10 € nettoWstępna wycena jednego wariantu
A Forstner bit holder for handy storage on a wall.
Wydruk około 9,25 €–11,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A remix of Laguite's impact driver bit holder with only 2 bits so that the print doesn't stick out and can actually sit upright when using smaller (2ah) batteries. Happy Printing! - Ty10y Print Settings Layer Height Any Perimeters 3 min…
Wydruk około 0,42 €–0,52 € nettoWstępna wycena jednego wariantu
Design: I started from the https://www.printables.com/model/190380-print-in-place-boxes designed by Vidar I sized the box using Fusion 360 parameters from the original model and design an insert for the drills bits. With thickness set to…
Wydruk około 3,95 €–4,83 € nettoWstępna wycena jednego wariantu
Cuddly Rabbit This model by BQEducation from thingiverse has a charming design and is of best modelling practice. https://www.thingiverse.com/thing:2776738 Perfect for trying out PrusaSlicers new function Fuzzy Skin. One Gcode with a…
Wydruk około 2,62 €–3,21 € nettoWstępna wycena jednego wariantu
8 Hello, Today I have 3 garden gnomes for you, hobbits. They are great for the garden. My kids love colors. For proper functionality, you need to use a Printing Profile! I used PLA/PETG as the material. You need to use supports If you are…
Wydruk około 10,96 €–13,40 € nettoWstępna wycena jednego wariantu
This box can hold 75 screwbits (short or long ones) with a ¼" or 6,3 mm hex shank. The spacing is ideal for easy access. Also your magnetic bit holder can fit in. Easily accessible on your workbench, or safely stored in your toolbox.…
Wydruk około 9,36 €–11,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You can use the organizer with Allen keys, drill bits and screws sizes from 1.5 to 5 mm, the holes are automatically adjusted to the needed diameter so no trying to find the right space, just stick it there. In the video I imbed magnets…
Wydruk około 2,13 €–2,61 € nettoWstępna wycena jednego wariantu
Airtag holder built to fit inside a Trek Domane with integrated downtube storage. Uses a cable tie to hold in place. Does not interfere with the opening or closing (but by fractions of a millimetre!) Perfect spot to set and forget the…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Yes Infill: 20-25% Filament: PLA
Wydruk około 2,31 €–2,82 € nettoWstępna wycena jednego wariantu
Keep your bits with you and your Vessel screwdriver wherever you go! This is a bit holder designed for the Vessel 220USB-P1, the model with USB-C charging and adjustable torque/speed. It can hold up to 11 + 1 bits together with the…
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
Finally forced my self to clean my tool drawer. And what's a better way than 3D printing cases and holders for my tools. I didn't print it yet tho. P.S.: The gcode is for manually changing the color (so via M600) as I am currently DIYing…
Wydruk około 4,00 €–4,89 € nettoWstępna wycena jednego wariantu
A model of an inflatable hot tub that I made for my daughter’s Maileg animals. This is able to hold water if you wish to use if for waterproof dolls instead. Supports are only advised on the water pump pipes. Created in onshape, step file…
Wydruk około 20,28 €–24,79 € nettoWstępna wycena jednego wariantu
A quick remix a this amazing parametrix box, for screwdriver bits storage. You ca add a 10x5x2 magnet to lock the bit holder in place.
Wydruk około 3,08 €–3,77 € nettoWstępna wycena jednego wariantu
I picked up a nullbits Scramble while looking into mechanical keyboards and decided to build a case for it to have a macro pad added to my setup. It would be reasonable to just stick some adhesive feet to the bottom of the assembly and…
Wydruk około 2,60 €–3,18 € nettoWstępna wycena jednego wariantu
Hi everyone, just use standard PLA - no need for PETG or more expensive filaments. This is the routerbit set, which it is designed for: https://www.bosch-professional.com/de/de/sets-fuer-verschiedene-anwendungen-15-teilig-2867965-ocs-ac/
Wydruk około 5,88 €–7,18 € nettoWstępna wycena jednego wariantu
Is compatible with the Bosch and Technico screwdriving systems from Klein Toys, like: Bosch mini Cordless screwdriver PSR 18 LI-2 Item number: 8567 Included bits: Phillips head Slotted head Drill Long drill Bit holder for real bits…
Wydruk około 1,85 €–2,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I saw a guy on Youtube with a square'ish tray with honeycomb walls for all his screws and misc. parts, but I could not find the model, and I wanted a round tray. So I made this in Fusion 360. It is 150 mm diameter and the walls are 9,4…
Wydruk około 3,77 €–4,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Drop-in replacement for the regular 6/8 1/4in bits holder. Accommodates 14 bits, 2 large bit slot on the site if needed. Note: with this holder, the tray does not fit in the middle compartment of the lid.
Wydruk około 1,08 €–1,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
update 13.3.2024 add Holder for Xiaomi Two version of wowstick holder A-Version Complet holder with backplate for wowstick, 52 normal 4mm bits and 4 long 4mm bits. all parts can be printed without supports. All for this version is marked…
Wydruk około 6,80 €–8,32 € nettoWstępna wycena jednego wariantu
I liked the https://www.printables.com/@Satellietje model, but I needed to keep more bits with the screwdriver, so I created similar stand in that way. The screwdriver has bits with diameter of 8mm hexagon (standard is something like…
Wydruk około 4,72 €–5,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Bitsholder with a strong clamp that is designed to easily slide onto a belt or pocket edge. The bits holder has room for 10 bits and a slot in the end that can be used as a screw driver. The holder has 3 slots for 9.5x9.5x3 square magnets…
Wydruk około 1,74 €–2,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remix of https://www.thingiverse.com/thing:5229866 which is also a remix of https://www.thingiverse.com/thing:4091982 . Uses 5x5x2 mm (square) neodymium magnets.
Wydruk około 5,88 €–7,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple holder which can hold up to 5 Stackable Game Bits Funnel Tray - Remix by PandaruExpress . Use two screws to hold it.
Wydruk około 0,35 €–0,42 € nettoWstępna wycena jednego wariantu
Updated the older model, the new box is heavily inspired by the token box by PrintArtificer at Etsy. The box holds a complete set of tokens for the card game Netrunner by Aurbits (2025), this includes the credit tokens. The new design is…
Wydruk około 2,46 €–3,01 € nettoWstępna wycena jednego wariantu
If desired, magnets can be installed 5x1mm.
Wydruk około 1,58 €–1,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EN: Holder for max. 12 pcs of max. 3.3mm diameter grinding bits. Easy print without supports. CZ: Stojánek na max. 12 ks brusných bitů o průměru max. 3,3mm. Snadný tisk bez použití podpor.
Wydruk około 0,60 €–0,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These are little storage boxes with lids for organizing your game pieces. I have provided two heights, the smaller being half height for efficient stacking. The game in the pictures is Earth, great game I highly recommend. I made them to…
Wydruk około 0,57 €–0,69 € nettoWstępna wycena jednego wariantu
6x6 CNC router bits holder for 6.35mm or 1/4 inch diameter, 1/8 inch or for 14x14mm bits housing.
Wydruk około 3,52 €–4,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
better looking holder than the stock one
Wydruk około 1,18 €–1,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dremel 4000 Wall mount with drill tool bits storage. The Dremel tool can be stored either way up/down depending on your preference. An additional section can be printed to expand your wall mount if required and can be mounted to the right…
[EN] Simple keyring with ratchet function for bits printable in one piece without gluing or inserting additional parts. Serves as a nice demonstration print, or a quick to make (approx 45min) gift. For a successful print, it is advisable…
Easy to print friction welding tips for your Dremel! No Supports needed and is a great project to use for your left over spools of filament you have laying around. 100% infill .28 layer height Print flat with a brim Attach to the tip of…
I designed this to allow me to mix and match storage options while using the same box design. The removable holders can store hex bits, 3.2 (1/8") and 6.4mm (¼") and 8mm router/dremel bits, or small parts. Boxes can also be divided up…
Holder for a total of 23 drill bits with a size from 1 mm to 12 mm in 0.5 mm steps. The holder can be mounted on a wall with 2 countersunk screws. The drill bits holder is printed in 3 parts: holder, label and ruler (optional). The label…
Bit holder. Big - for 80 hexbits. Wall mounting posisibility - flat head M4 screw. No supports needed. 3D printing optimised - a lot of free space inside, but still tough (high infill reccomended). If you want to have an not-so-tight…
It fits perfectly on a 8x4 Board or just like me 2x of them on 8x8. It's designed to use the Board connectors @ the edges to increase efficiency of the build. During the time I've collected too many Bits! That's why I've had to do this. I…
Meet Ribbits, the no-supports-needed frog! They come in a variety of options and with an assortment of accessories all designed to be printed without the need for supports as long as your machine can handle around 55 degree overhangs. We…
Organizer for drillbits for IKEA SKADIS board. Three sizes of holders available for most common drill bit sizes. FreeCAD files provided as well, if You need adjustments for different drillbit sizes. Each holder needs 2 hooks to hold on…
This is a remix of the excellent bit trays by swholmstead .I didn't do anything except extend and taper the base to cut down on print time and filament use. They still stack exactly the same way as the original but because of the scaling…
My first try at creating a model for sharing. Holder for 64 hex screwdriver bits and a magnetic extension bit. Inspired by LTT Screwdriver Bit Holder , but made “from scratch” in TinkerCAD using this template .
Насадка на точило с абразивным кругом для заточки свёрл , угол при вершине 130°. Насадка подойдёт для сверла диаметром до 10 мм, угол 130° может быть использован на свёрлах по дереву и мягкому металлу. Насадка крепится к точилу болтом М6…
The Microjig Matchfit system is endlessly useful for custom jigs, storage, organization, etc, but the bits and knobs are on the expensive side. I modeled and tested a number of variations to land on these, which are fully compatible with…
This is a holder for metric drill bits from 1 to 10 mm in 0.5 mm steps. I have added a couple of extra holes for the narrower drill bits, I like to have some extra because I tend to lose them or they can break off from time to time. The…
Make your own travel chess set or bit storage system. This uses 1/4 inch bits. Click here if the video doesn't work. Print the top layers as a different color to get the alternating colors. I paused the print at the layer and manually…
Its round shape makes it easy to carry, while the internal honeycomb insert keeps each bit upright, neatly separated, and easy to access. Screw-on lid with textured grip for easy opening Compact and portable design Perfect for toolboxes…
A holder for the bits of my Electric Screwdriver
🧩 PentaCubit Puzzle The puzzle consists of 13 pieces and a square storage box with a sliding lid. The puzzle pieces are used on both sides. Besides the puzzle shape in the box, you can create many other shapes. This puzzle has a high…
The tool is a remix of the fantastic original model, which is super easy to print and works great. It has been redesigned to fit Parkside (Lidl brand) AC Multi-Tool "Dremel" tool and adds additional features. For small drill bits push the…
NOTE: Although this prints well on my old Anycubic i3 Mega, it does not print properly on my P1S. Because of the increased speed and accuracy of modern printers printing it on the side with the spinner does not offer enough stability. It…
Dropped and broken my hex bits organiser and decided to model a new one, stronger and more thought through design. Multiple boxes can be printed and they stack up on each other with embossed guides. Box is designed so that drawer clicks…
Various bit holders ... allen, torx, flat, cross, long and taps
I printed the Parametric Rugged Box for another project and thought it was an awesome model that worked really well. I had a set of Parkside PSB 6 A1 stepped drill bit that I wanted to make a case for for a while and thanks to the awesome…
Bit holder for hexagon screw bits New version available: Klick here Of course, there are already different bit holders here. The special thing about this one is that you only need very little filament to print it, and the printing is very…
After using my hex bits storage for a while I realised I needed a similar solution for drill bits. So here we go, same housing, but new convenient way to place your drill bits, it closes firmly so it will not accidentally open and so you…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
I designed this simple storage unit for my rotary tool bits based on the Gridfinity system by Zack Freedman.
DUST_TOP & DUST_TOP_HALF : There are 2 cable passthroughs on top of the Ender 3 V3 SE/KE. One on the left for Z-motor cable, one on the right reserved for customizations. This dust cover stops too much junk from getting in. Just use a bit…
I got tired of my bits rolling around everywhere, so I designed this simple storage box. It holds 60 bits in a 12×5 layout and keeps them neat, secure, and easy to grab. Prints in place – no assembly or extra hardware needed Nice snug fit…
This is an insert / organizer for Quacks of Quedlinburg, the full Herb Witches expansion, the locoweed recipe books and general fortune cards from the Alchemists expansion, the BGG GeekUp bits, and the BGG GeekUp bags. It has no lid lift,…
I made this box as I wanted to keep all of the tools & parts I commonly use for printing in one place and easy to access. Massive thanks to @Whity for his rugged box file. I've included a Step file so people can make their own version, I…
PLEASE - if you like this model, give it a like? Thank you! This Gridfinity drill bit storage tray is 4 x 5 standard (42mm) grid units, and 3 standard units height. It stores 18 different drill bit sizes. I made it for HSS 1.0 to 10.0 mm…
notes I have updated the bitholders (8B and 5) since the added pictures. At first the bits didn't really fit well, hence the change. But I altered my printed models to save material. I made this minimalist modular organization collection…
Two holders for various bits. Tilted by 30 degrees, so holders can be located close one above another. holes closer to board are deeper and are for longer bits. Print with 2-3 perimeters, 0.4 or 0.6 nozzle, 15% infill, 0.2 layer, but…
Remixed “Ribbits the Simple Cute Frog” to low poly version. Can be printed with only e.g. 3 wall lines without infill and bottom layers, to save time, material make it glow with a light or make a hidden compartment for a key or something…
Is the reach of your drillpress to short, and are you strugeling to get perfectly perpendicular holes in the middle of a sheet of wood? This jig might not take you all the way to perfect hole, but it will at least make it a lot easier to…
Get a proper storage box for your hex bits! Works phenomenal and looks great! Created by Leo Rauschenberger
Croc jibbits that my kids wanted. Harry Potter Voldemort head Death Eater mark Color guard symbol These are all remixes and I want to thank the original makers of the models that I then resized and slapped on top of the jibbit stand. I…
1x1 gridfinity block for holding a bunch of 4mm hex bits. They're pretty tightly spaced so keep that in mind—it can be kind of hard to grab 'em.
Another gridfinity hex bit holder. This one holds 136 bits in a 3x2 footprint. Holes are 7mm diameter to comfortably fit standard ¼" (6.35mm) hex bits.
Material: PETG / ASA / PLA+ Druckereinstellung: Layerhöhe 0,2 / Infill 20 % honeycomb / Wände 3 / Schichten 5 oben, 5 unten / No Support Kein zusätzliches Material erforderlich / no additional material required Siehe auch / see also:…
These holders are designed for metric drill sets, and have a space for 1 to 10mm bits at 0.5mm spacing, 11, 12, 13, and the tap drills 3.2, 3.3, 4.2 & 4.8. Holes were a fraction tight on mine. I'm not going to redesign it. Just bore them…
Gridfinity (1x2 and 1x3) holder for 1/4 inch hex bits. Inclined design to fit into a tool chest drawer. 14/10/2023: 7 and 8 slots versions. 25/10/2023: Adding a 1x3 version with 12 slots. 08/12/2023: Adding a 2x3 version with 12 slots for…
Ring holder in a creative and cute design with two rabbits forming the central motif. The entire holder is designed in the shape of a heart, which serves as a bowl for storing jewelry such as a chain or earrings. The rabbits are placed in…
🔧Compact rotating-base screwdriver for 4 mm bits. Print-in-place design, strong, fast, and ready for daily use. 🛠 Printing Instructions Print in PLA or PETG at 0.2 mm layer height, 3 perimeters, and 15 % triangle infill. Arachne wall…
My version of an LTT Bit storage holder for the 20mm bits that are available for the LTT Screwdriver. This was a bit of a pain because I am terrible in Fusion360, but after many failed prints I was able to come up with something.…
I wanted a nice drill bits holder to put on the my Multiboard wall and the holder from user PhilippHee it is very practical and beautiful and of course I couldn't not use it! Thank you for sharing it Text is copy from original Creator:…
Tilted holders for various drill bits - the one with more holes can hold up to 10mm drill bit, the other one up to 15mm drillbit Print with 2-3 perimeters, 15% infill,0.4-0.6mm nozzle, 0.2-0.3mm layer, any material will do. No supports…
Gridfinity Hex Bit Holder, 1x1, 1x2
Gridfinity bins for drill bits. There are several heights and lengths so you can print what you need based on the drill bits that you have. It makes no assumptions whether you have drill bits every mm, or every quarter mm, or in imperial…
Description: A number of months ago I found the LTT Quick Bits Case from JH3D . I liked the design and even made one of the cases for myself. However, I didn't like that each bit set was not able to be stored in a single row in the case.…
Přípravek pro ostření vrtáků, první pokus, docela funguje.
Update 10/18/2020: I've added my Fusion 360 design. It is parameterized so that you can adjust the lengths of each side, the size of the magnets, etc. These are 60mm x 60mm trays with holes for 6mm x 2mm circle magnets on all 4 sides.…
#gridfinity This is another part of my gridfinity dremel caddy collection, These 2 trays hold some of the cutter disc/ angle grinder disc commonly used for rotary tools . Since I dont have many of the little cutter discs I've added some…
I thickened the outer wall of the original design, increased the number of storage, boxes can be stacked and assembled, and added another higher box type. reference: https://www.thingiverse.com/thing:1975865…
Box for Hex drill, Screwdriver, Hex Screwdriver ETC
a piece to hold up to 48 screw driver bits on a tool wall
Easy, fast printable, no support itsy bitsy spider. Source: https://www.thingiverse.com/thing:3935915/files
26 ji bits for every hole in your crocs
This post/print only contains the bottom! If you want the rest please refer to TheSameNameTwice, the rest of the files for the box are there. I did not want to steal any downloads.…
Hobbits Fairy House – Whimsical Miniature Step into a storybook with this charming Hobbits Fairy House – a cozy little haven straight out of the Shire, reimagined with fantasy flair! Featuring a swirled round door, mushroom-lined stone…
