P
PrintablesPeter Farell
Zen Bridge and Temple
Zen Bridge and Temple. Print separately. Size to your preference.
Wydruk około 7,32 €–8,95 € nettoWstępna wycena jednego wariantu
- Pobrania
- 2788
- Polubienia
- 964
- Ocena
- 5
Wyniki wyszukiwania: bridge
1594 modeli
P
PrintablesMarteinn - 3DP Iceland
Bridge and overhang test
this is a model I created to test out longer bridges and large overhangs
Wydruk około 2,03 €–2,48 € nettoWstępna wycena jednego wariantu
- Pobrania
- 2226
- Polubienia
- 76
- Ocena
- 4,77
P
Printablesdtoux
Philips Hue Bridge Bracket
This is a print of a bracket for mounting Philips Hue Bridge to a wall. Features: tight friction fit for the bridge ability to mount the bridge without disconnecting wires does not block access to the button and LEDs screw holes for…
Wydruk około 2,42 €–2,96 € nettoWstępna wycena jednego wariantu
- Pobrania
- 1993
- Polubienia
- 291
- Ocena
- 5
P
PrintablesDaniel
Brio Wooden Train Bridge Support (Stackable)
I wasn't quite happy with all the existing options so I took ideas from several places and put them together to make just what I was looking for. I hope it fits your needs as well! I designed these to fit my Brio and compatible tracks, so…
Wydruk około 2,12 €–2,59 € nettoWstępna wycena jednego wariantu
- Pobrania
- 1917
- Polubienia
- 256
- Ocena
- 4,91
P
Printablesdtoux
Philips Hue Bridge Bracket v2
This is a smaller version of the original design that uses less plastic. It features: tight friction fit for the bridge ability to mount the bridge without disconnecting wires does not block access to the button and LEDs screw holes for…
Wydruk około 1,64 €–2,01 € nettoWstępna wycena jednego wariantu
- Pobrania
- 1120
- Polubienia
- 127
- Ocena
- 4,79
P
Printablesfunction.3d
Desk lamp with an orbital design, mood lighting, and bridge structure
Update: STL now available , I recommend to print the gcode as it is optimized but if you can't print the gcode you can load the STL in your slicer and try this way. I also add a 3mf with the settings to print it from the orca slicer.…
Wydruk około 2,08 €–2,55 € nettoWstępna wycena jednego wariantu
- Pobrania
- 974
- Polubienia
- 219
- Ocena
- 4
P
Printablesroosteralex82
Remixed Wooden Train Track Bridge
MobyDisk's OpenSCAD train track library SE has some AMAZING parts, but I wasn't a fan of the bridge, because you'd still require a block to support the track spanning the bridge. I took the bridge ramps into TinkerCAD and added a…
Wydruk około 6,73 €–8,22 € nettoWstępna wycena jednego wariantu
- Pobrania
- 549
- Polubienia
- 93
- Ocena
- 4,8
P
Printablesph_neutral
Skeleton Bridge Pillar for wooden train tracks (Brio/Ikea)
I always felt like most models used unnecessary amounts of filament, so I decided to try and create my own models with less material. It's still reasonably strong and prints quite fast and without supports. Recommended Settings: Material…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena jednego wariantu
- Pobrania
- 465
- Polubienia
- 101
- Ocena
- 5
P
PrintablesOBA
H0 modular Concrete Bridge Pillar System pluggable / H0 modulares Beton-Brückenpfeiler Stecksystem
Motivation When bulding a temporary model railway bridge or ramp, you need pillars with various sizes. Using Lego for this purpose did not look too realistic. For this reason I designed a pluggable model railway pillar system, that allows…
Wydruk około 11,72 €–14,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 372
- Polubienia
- 47
- Ocena
- 0
P
PrintablesFantastic Plastic Person
Train Bridge / Tunnel for Brio Type Trains
A support for the Ikea/Brio type train bridge. It will fit slightly larger than typical trains. If you like this model check out this collection of my other toy train models.
Wydruk około 6,25 €–7,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 319
- Polubienia
- 69
- Ocena
- 4,75
P
PrintablesSasha D
Hadley Adapted FuseBridge 1.25" Focuser
UPDATES: Added version with mounting screw holes countersink so knob does not collide with screw head for those using full sized screw heads. This focuser is based on the Crayford design, where a smooth pinion is rolled along a smooth…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
- Pobrania
- 281
- Polubienia
- 52
- Ocena
- 5
P
Printablesmozgy
Temp and Bridge Tower - GCodes for MK4 and XL
Resliced temp&bridge tower for MK4 and XL slicer 2.6.0, PLA, brim, 0.20 DETAIL MK4 - 0.4mm XL - 0.6mm nozzle resliced for new FW 5.1.0 slicer 2.7.0, PLA, brim, 0.20 STRUCTURAL MK4IS - 0.4 nozzle XLIS - 0.6 nozzle
Wydruk około 1,83 €–2,24 € nettoWstępna wycena jednego wariantu
- Pobrania
- 267
- Polubienia
- 20
- Ocena
- 5
P
Printablespavel starosta
Ikea Lillabo train bridge base
A solid base (support, arch, pillar) for ikea lillabo bridge. Our basic set came with a light plastic arch which ended up to be pushed away all the time. Later I found out that ikea used to make the bridge in one solid wooden part. I´ve…
Wydruk około 5,60 €–6,84 € nettoWstępna wycena jednego wariantu
- Pobrania
- 257
- Polubienia
- 63
- Ocena
- 5
P
PrintableskKdH
90 Degrees Bridge Ramp - Brio Compatible
A 90-degree bridge ramp for wooden train track that allows train cars to transition smoothly between different elevation levels while making a quarter-turn (90-degree) curve. The curved design makes this piece ideal for smaller play…
Wydruk około 6,41 €–7,84 € nettoWstępna wycena jednego wariantu
- Pobrania
- 248
- Polubienia
- 57
- Ocena
- 5
P
Printablesskypy
Tiny Distance Tower Test - Retraction / Extrusion / Bridge ..
Material-saving distance tower test model suitable for dialling in most of the printing profile parameters, including retraction, flow/extrusion rate, temperature, bridge, ironing settings, and certainly many more. Optimized for 0.4mm and…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
- Pobrania
- 239
- Polubienia
- 9
- Ocena
- 5
P
PrintablesBas
Marklin C Railway bridge curved
Print the two walls separate, bend and glue into place.
Wydruk około 3,40 €–4,16 € nettoWstępna wycena jednego wariantu
- Pobrania
- 184
- Polubienia
- 16
- Ocena
- 0
P
PrintablesSJM
Carrera Go! Stützen Pfeiler Pillar Brücke Bridged Support for 1:43 Slotcar Race Track
This is a bridged replacement stand for building bridges with Carrera Go! 1:43 slotcar race tracks. It's an extension for https://www.printables.com/model/1078709-carrera-go-stutzen-pfeiler-pillar-support-for-143 . It is possible to…
Wydruk około 0,74 €–0,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 183
- Polubienia
- 29
- Ocena
- 0
P
PrintablesPeter Farell
Ezra Bridger's Lightsaber
A weathered version of Ezra Bridger's Lightsaber. combined the elegance of a single-bladed lightsaber with the practicality of a blaster pistol .
Wydruk około 9,10 €–11,12 € nettoWstępna wycena jednego wariantu
- Pobrania
- 149
- Polubienia
- 67
- Ocena
- 5
P
PrintablesFaasteer
Tado° Internet Bridge holder
In our house we have a smart heating system from Tado that uses this Internet Bridge. This device is notorious for its poor connection range, and the best place we found to cover our entire house was on top of the storage rack we have in…
Wydruk około 1,34 €–1,64 € nettoWstępna wycena jednego wariantu
- Pobrania
- 136
- Polubienia
- 11
- Ocena
- 5
P
PrintablesOBA
Märklin H0 modular Bridge Rail-C R1-30° Element (multi part) / Märklin H0 modulare Brücke Gleis-C Element R1 30° (mehrteilig)
Motivation When building a temporary model railway bridge or ramp, you need pillars with various sizes. Using Lego for this purpose did not look too realistic. For this reason I designed a pluggable model railway pillar system, that…
Wydruk około 0,71 €–0,87 € nettoWstępna wycena jednego wariantu
- Pobrania
- 127
- Polubienia
- 17
- Ocena
- 5
P
Printableschoucroute6790
PiKVM Case Raspberry Pi Zero 2 + HDMI to CSI bridge
A small case for Raspberry Pi Zero 2 designed for PiKVM (DIY version with rpi zero 2) You need : 1x Raspberry Pi Zero 2 ( link ) 1x HDMI to csi ( link ) 2x hexagonal spacer M2.5 x 12mm ( link ) 4x screw M2.5 Parts to print (~ 1.5h with my…
Wydruk około 1,54 €–1,88 € nettoWstępna wycena jednego wariantu
- Pobrania
- 124
- Polubienia
- 10
- Ocena
- 0
P
PrintablesOBA
Märklin H0 modular Bridge Rail-C 188mm Straight Element (multi-part) / Märklin H0 modulare Brücke Gleis-C 188mm Element gerade (mehrteilig)
Motivation When building a temporary model railway bridge or ramp, you need pillars with various sizes. Using Lego for this purpose did not look too realistic. For this reason I designed a pluggable model railway pillar system, that…
Wydruk około 1,16 €–1,41 € nettoWstępna wycena jednego wariantu
- Pobrania
- 103
- Polubienia
- 7
- Ocena
- 0
P
PrintablesPrinter4496
Modular Truss Bridge Connector - 3D Printable STEM Project
Credit to the Original Creator This model is inspired by the classroom project “3D Printing Truss Bridges” created by the user “PolarCloud” and published on the website https://www.instructables.com/3D-Printing-Truss-Bridges . Bridge…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena jednego wariantu
- Pobrania
- 89
- Polubienia
- 19
- Ocena
- 5
P
PrintablesOBA
Märklin H0 modular Bridge Rail-C 360mm Straight Element (multi-part) / Märklin H0 modulare Brücke Gleis-C 360mm Element gerade (mehrteilig)
Motivation [ I need a long straight bridge element... ] When building railway bridges and the bridge crosses a track on the ground diagonally or crosses a parallel double track, sometimes the available straight bridge elements (172mm,…
Wydruk około 2,17 €–2,65 € nettoWstępna wycena jednego wariantu
- Pobrania
- 86
- Polubienia
- 4
- Ocena
- 0
P
PrintablesAlien3D
L298 Dual H Bridge Motor Speed Controller Mount
Mount for L298 Dual H Bridge Motor Speed Controller https://amzn.to/3wRm0ml
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
- Pobrania
- 85
- Polubienia
- 7
- Ocena
- 0
P
Printablesjwendland
Aero Bridge with Headlight Mount (parametric)
The bridge is designed to be fastened with 2 zip ties to round 22mm aero bar extensions which are 81mm apart. The light mount should be compatible with many available headlights (10mm width, bore for M6x25 bolt). I printed this in PETG…
Wydruk około 1,50 €–1,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 71
- Polubienia
- 7
- Ocena
- 0
P
PrintablesHoenir15
Hue Bridge holder/mount for Ikea Skadis
I redesigned the wall mount for a Philips hue bridge fitting on the IKEA skadis punchwall. I made the walls quite thicker (2mm) to get a more stiff structure. Furthermore I made the skadis hooks a little bit smaller, so they fit more…
Wydruk około 2,56 €–3,12 € nettoWstępna wycena jednego wariantu
- Pobrania
- 66
- Polubienia
- 6
- Ocena
- 0
P
Printablescochesdiez
Hockey Trainer Bridge One Piece
Hockey Trainer Bridge One Piece to print on larger print bed One piece remix of Steven Quinn's Hockey Trainer Bridge
Wydruk około 1,73 €–2,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 54
- Polubienia
- 2
- Ocena
- 0
P
Printablesmstejska
Model for da Vinci bridge based tent
just test
Wydruk około 1,35 €–1,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 51
- Polubienia
- 22
- Ocena
- 0
P
PrintablesNina Máčová
Wall art: Set of three old bridges
Wall art: Old bridges (20 cm) three variants
Wydruk około 2,93 €–3,58 € nettoWstępna wycena jednego wariantu
- Pobrania
- 36
- Polubienia
- 12
- Ocena
- 0
P
PrintablesPracticals
Practicals Philips Hue Bridge Rackmount V1 (Without Lid)
Info ------------------------------------------------------------------ This is a rack mount V1 (without an top lid) for the Philips Hue Bridge (V2). I used ShapR3D for modelling. Choose your Version (right or left). Please use 6mm screws…
Wydruk około 6,07 €–7,42 € nettoWstępna wycena jednego wariantu
- Pobrania
- 18
- Polubienia
- 2
- Ocena
- 0
P
PrintablesAzizulrahman Mohamed
Guitar bridgetail
this model been create to find where the breaking point hit that coming from the string tension. The final full set of this design (MK2) will be upload when all my own certification rules gain thumbsup. As we all know ..PLA are the best…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena jednego wariantu
- Pobrania
- 14
- Polubienia
- 0
- Ocena
- 0
P
PrintablesGSHS: Center for Applied Design
Gulf Shores High School Bridge Heart Challenge BESTRobotics2023
Contact Name: James M. Salvant [email protected] School: Gulf Shores High School BEST Hub: Emerald Coast BEST Robotics - University of West Florida Highlights: This is a single chamber design that can be used as a stand alone system that…
Wydruk około 2,28 €–2,79 € nettoWstępna wycena jednego wariantu
- Pobrania
- 14
- Polubienia
- 2
- Ocena
- 0
P
PrintablesGCHS Robotics
Garden City Highschool 3D Printed Bridge to Transplant Heart BESTRobotics2023
Contact Name: Robert Smith, [email protected] School: Garden City High School BEST Hub: Kansas BEST How It Works Our bridge to transplant heart works by two screws (in black) being driven either two or one motor (stand-ins marked…
Wydruk około 1,07 €–1,30 € nettoWstępna wycena jednego wariantu
- Pobrania
- 14
- Polubienia
- 4
- Ocena
- 0
P
PrintablesAlex_Iskra
Bridge Baby Toy (Carry case for kids)
I was playing DS and my daughter really got into the whole carry the baby thing and started to strap dolls to herself. So a decision was made one evening to create a BB pod carry case that can fit a 110mm long doll (or anything else). It…
Wydruk około 0,29 €–0,36 € nettoWstępna wycena jednego wariantu
- Pobrania
- 10
- Polubienia
- 3
- Ocena
- 0
P
Printableseds_3d_shop
Eds powerfull magnetic Bambu Lab X1 / P1S (full AMS Hub compatible!) Exhaust Fan Muffler / Fan Silencer without Supports/Bridges!
Bambu Lab X1 Exhaust Fan Muffler / Fan Silencer (Eds Version) My remix of really cool original silencer of OurAngryBadger! THANK YOU for the step files!!! :-) Main changes - really nice (with big bambu lab logo) and easy print version…
- Pobrania
- 19 241
- Polubienia
- 1519
- Ocena
- 4,91
P
PrintablesIker Libano | KNIN Custom
3D Printing Bridge Calibration Test (Basic & Advanced)
🎥 Watch the video tutorial In the video, I explain: -How bridge flow and speed affect the print. -Why more flow gives smoother results. -How to tune these settings in OrcaSlicer . -How to combine this with Tree Supports → “Critical…
- Pobrania
- 19 004
- Polubienia
- 5479
- Ocena
- 4,86
P
Printables3DMakerNoob
Bridge Test Piece
Multiple pieces to test how your printer handles bringing. The files also includes bridges with sacrifical columns.
- Pobrania
- 5457
- Polubienia
- 205
- Ocena
- 4,95
P
PrintablesMakeWonderfulThings
Bridge Density Experiments
These models and experiment sets are featured in this YouTube video: You will need the latest version of OrcaSlicer. As of 11/15/2025, you will have to do this: 1. Go here: https://www.orcaslicer.com/download/ 2. Download the nightly…
- Pobrania
- 5250
- Polubienia
- 727
- Ocena
- 5
P
PrintablesDarrens Workshop
Bit and Blade Bridge
A tool for accurately setting router bit and saw blade height. Measures 2 to 20mm in 1mm increments.
- Pobrania
- 4678
- Polubienia
- 1045
- Ocena
- 4,98
P
PrintablesDanZbo
Bridge test - Fast & Low cost | Ender 3
Info Simple, fast and low cost bridge test. Only ~2g. Printed really well on my ender 3. Tested with PLA. Update: I have added more distances with level name. Update 2: I tested all levels on my Ender 3 with the Hydra Fan Duct and as you…
- Pobrania
- 4192
- Polubienia
- 216
- Ocena
- 4,9
P
PrintablesRong
Dupont connector bridge
Combine and rearrange single- or multiple-contact Dupont connectors into a same-pitch bridge. Now with multiple row support! The assemblies can be a bit tight, but still much easier to modify than re-populating a dedicated housing. If…
- Pobrania
- 3571
- Polubienia
- 2419
- Ocena
- 4,97
P
Printablessh
🌉 SET: Lego DUPLO train BRIDGES (optimized)
UPDATE 26.2.2022: added V2, V3 for pillars (3mf for tighter connection to other duplo bricks and for better overhang printing) added short straight track (the size of ordinary straight original track) with big side protrusions, which are…
- Pobrania
- 2855
- Polubienia
- 380
- Ocena
- 4,93
P
PrintablesDET-Man
Cable Bridge PLUS for SB2209 / SB2240
Installing a 🥰 BTT SB2209 on my Voron Stealthburner/CW2, I wasn't satisfied with the available umbilical solutions. So I started from scratch, explored different approaches, and designed this Cable Bridge PLUS. It ended up not that…
- Pobrania
- 2629
- Polubienia
- 33
- Ocena
- 0
P
Printablescrudo
Gravitrax bridge
Gravitrax compatible bridge for multilayer tracks without supports
- Pobrania
- 2552
- Polubienia
- 290
- Ocena
- 4,94
P
Printablestimqui
Bridge Support - Brio/IKEA Wooden Train Track
Bridge pillar compatible with Brio, IKEA Lillabo (old plastic dogbone and current wooden-only version too), Thomas Train, Kaufland, LIDL Playtive, kmart, ebay,... wooden tracks. UPDATE: Double height bridge support added! Print…
- Pobrania
- 2407
- Polubienia
- 516
- Ocena
- 5
P
Printablespositron
HO scale railway bridge
An HO-scale bridge for railway modeling. The length is 230mm, about maximum I could fit into my printer. Most parts required 45 degrees rotation. Internal width for trains is around 54mm, full width is around 75mm. Internal height is…
- Pobrania
- 2323
- Polubienia
- 303
- Ocena
- 5
P
PrintablesMarteinn - 3DP Iceland
Temp and Bridge Tower
This is a temperature and bridging test tower to use to tune in filaments Tower has 3 different with bridges between 2 towers. Each tower is separated with a narrow part to test out layer adhesion strength by trying to brake the tower at…
- Pobrania
- 2218
- Polubienia
- 53
- Ocena
- 4,67
P
PrintablesWilko_SLO
Bridge
Add Pin connectors in Prusaslicer or use glue to fix fence to Bridge main part.
- Pobrania
- 2111
- Polubienia
- 281
- Ocena
- 5
P
PrintablesAndy D
Easy Print LED Light Bridge / Arc
Like so many people, I really liked the LED Bridge Lamp by Opossums . There are plenty of other great designs out there too, like this one , this one and this one . They've all got their own strengths but I felt there might be people out…
- Pobrania
- 2059
- Polubienia
- 905
- Ocena
- 4,96
P
PrintablesAndor @fullydefined
Bridge ~ Easy to print
Print one deck and two railings and push the deck in place. You should not need glue. The ribs connecting the slabs of the deck should be on the bottom. Enjoy!
- Pobrania
- 1893
- Polubienia
- 463
- Ocena
- 5
P
PrintablesSDHayes
196 Foot HO Scale Girder Truss Bridge - Self Supporting
I am in the process of designing/building a spare room model railroad and one of the key features I needed was a drop-down bridge to span across the entry to facilitate a loop layout. My design criteria were: 27" opening, prototypically…
- Pobrania
- 1706
- Polubienia
- 211
- Ocena
- 5
P
Printablesgoodjobswe
NoBridgeScript: The Typeface Designed for the Third Dimension
I had a novel idea - a font composed entirely of 45-degree angles at maximum. This led to the birth of NoBridgeScript, currently in its first draft. I foresee numerous tweaks and refinements ahead, but the vision is clear: a font where…
- Pobrania
- 1502
- Polubienia
- 928
- Ocena
- 5
P
Printablessquinn
Bamboo Bridge
An attractive little bridge designed so that the main platform appears to be constructed of a series of bamboo trunks, supported by elegant curved beams, and fit with hand rails to ensure safe crossing. The bridge is intended to be…
- Pobrania
- 1457
- Polubienia
- 468
- Ocena
- 5
P
PrintablesCas van der Maat
bridge for aquarium
bridge for aquarium supports are needed!
- Pobrania
- 1379
- Polubienia
- 337
- Ocena
- 5
P
PrintablesHuKru
LEGO City Train Bridge with ramps
<<<text and pictures are not mine but reuploaded along with original model and licence, my own comment and pictures will be in the “make” section>>> Summary Had to make my own version, to get my own character on the bridge and pillars.…
- Pobrania
- 1359
- Polubienia
- 215
- Ocena
- 5
P
PrintablesMiniWorld3D
Tower Bridge - London , UK
🇬🇧 Welcome to London! This model was made by Brian Sánchez. It has been optimized for printing without supports, it can be assembled easily and it has an functional drawbridge that opens and closes ! The Tower Bridge is a combined bascule…
- Pobrania
- 1349
- Polubienia
- 250
- Ocena
- 4,67
P
PrintablesMagda j
Cat Walking Bridge (fully Printed)
Does your cat look bored outside a window? Doesn't your old cat jump to her favorite spot anymore? Is your cat in need for a new exciting toy? Do you want to print something cool looking and useful for your cat? Then you will need this…
- Pobrania
- 1318
- Polubienia
- 792
- Ocena
- 4,86
P
PrintablesInternational School Olomouc
Bridge Strength (Truss)
Students will create a 3D printed bridge using different shapes for structural support. Then we apply weight to them. Whoevers bridge is the strongest will win the competition.
- Pobrania
- 1237
- Polubienia
- 120
- Ocena
- 5
P
PrintablesJACK98
Calibration Cube, Bridge, Overhang & Retraction Tower
Test your printer settings on calibration cube, bridge, overhang & retractions all at once.
- Pobrania
- 1209
- Polubienia
- 77
- Ocena
- 5
P
Printablesaiye
1/18th scale crawler bridge
This is the customizable bridge for 1/18th and 1/24th scale crawlers, like the TRX4M and SCX24. There are 3 bridge support sizes, 50mm,100mm, and 150mm. Each bridge support comes in 2 variants, flared base, and stackable. The stackable…
- Pobrania
- 1196
- Polubienia
- 197
- Ocena
- 5
P
PrintablesStu
Stone Bridge
Stonebridge I was testing to show colour contrast
- Pobrania
- 1095
- Polubienia
- 130
- Ocena
- 4,75
P
PrintablesDimension Zero
Hot Wheels compatible Bridge (updated)
This Hot Wheels compatible bridge piece adds even more possibilities to your Track builds. I recommend printing two of these but you don’t have to.
- Pobrania
- 1070
- Polubienia
- 163
- Ocena
- 2,25
P
Printablesphi.gl
Bridge pillar for Ikea/Brio train track
Bridge support compatible with Ikea and Brio wooden train track. Minimalistic design that allows great variability of use. Main features: Tracks connector for better stability Stackable to create higher bridges Easily printable without…
- Pobrania
- 1055
- Polubienia
- 191
- Ocena
- 4,56
P
Printablesnerg
Lego DUPLO train BRIDGES (optimized again)
optimized for better printing and durability
- Pobrania
- 1021
- Polubienia
- 122
- Ocena
- 4,1
P
PrintablesRomain
Brio Bridge
Brio print comptatible with the Brio train system. Fun cheap part to print to improve the Brio system of your kids! Comments appreciated for improvements.
- Pobrania
- 990
- Polubienia
- 150
- Ocena
- 4
P
PrintablesRealPrint
Arch bridge for Marklin M-tracks; H0 Bogenbrücke für Märklin M-Gleise
Die Version mit den Ausschnitten ist für die Verwendung einer Oberleitung (siehe Bild). Man braucht die Base zweimal oder die beiden Versionen mit den Cut outs. Dazu das Top-Teil und optional den Connector, um die Brücke von unten beim…
- Pobrania
- 969
- Polubienia
- 94
- Ocena
- 4,67
P
PrintablesAndor @fullydefined
![Golden Gate Bridge [String Art]](https://media.printables.com/media/prints/573999/images/4590471_3f637853-6699-498b-9021-24fb5d417009/1693931560144.jpg)
Golden Gate Bridge [String Art]
A model of the golden gate bridge in San Francisco How to make: Print all STL files twice in the orientation provided, or print the objects in the .3mf file twice to get all parts. Connect the two roads with two pieces of filament (about…
- Pobrania
- 955
- Polubienia
- 107
- Ocena
- 5
P
PrintablesSteve K
HotWheels Bridge
Remixed Bridge: Track 2mm wider,Tunnel Fits track,Built in connectors
- Pobrania
- 944
- Polubienia
- 211
- Ocena
- 5
P
Printablesgloda
Speed Bridge (Bridging Test)
This is a bridging test that won't waste loads of material and prints in 20 minutes. 2g of filament gives you about 100 bridging extrusions, each a different length, from 2 to 200mm. Print with 1 perimeter.
- Pobrania
- 899
- Polubienia
- 51
- Ocena
- 4,75
P
PrintablesCode2
Ulvheim Bridgehouse
This is my fifth Ulvheim building remix. It's made of 10 pieces that fit an Ender3 size and that you can print supportless. UPDATE: I've update the "D" Section, so you can now revert the entrance to the outside and the paths to the last…
- Pobrania
- 897
- Polubienia
- 224
- Ocena
- 4,5
P
PrintablesJuniper
RETRO TRUSS BRIDGE HO (1/87th) SCALE
This HO scale RETRO-TRUSS BRIDGE is a combination of a Walthers Cornerstone Modernized Double-Track Truss Bridge kit (#933-4510) and 3D printed open structure trusses. Use the Walthers truss sides as a template for cutting and mitering…
- Pobrania
- 887
- Polubienia
- 148
- Ocena
- 5
P
Printablesdziobu
LEGO Duplo Train track: straight (double size for bridges)
Easy to print, tought and compact construction. Without supports. Category: Construction Toys
- Pobrania
- 879
- Polubienia
- 98
- Ocena
- 5
P
PrintablesPepiBlu
Wooden Bridge for Model Railway in H0 1:87
Printed in PLA with a 0,25mm Nozzle and 0,1mm Layer Easy to assemble. Should be weathered.
- Pobrania
- 843
- Polubienia
- 97
- Ocena
- 5
P
PrintablesSeppel
GraviTrax Junior Brücke / Bridge
Durch diese Brücke spart man sich nicht nur viele Höhensteinen, sondern hier können neue Ebenen geschaffen werden. Die Mitte ist zwei Steine hoch. Sehr einfacher und schneller Druck. Die Drei Steine mit der großen flachen Fläche mit…
- Pobrania
- 841
- Polubienia
- 75
- Ocena
- 5
P
PrintablesMichal Fanta
Bridge Track - W9
Bridge rail compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini Straight Track - B2 Mini…
- Pobrania
- 836
- Polubienia
- 144
- Ocena
- 4,69
P
Printablesᴜ ɴ ʀ ᴇ ᴀ ʟ
Battery Beer Crate - Enhanced Bridges
A simple edit of the original design, which had some overhangs that can be challenging for some materials like PETG. For now this only includes AA and AAA batteries. Like for the original design, the stackable rim is supposed to be glued…
- Pobrania
- 814
- Polubienia
- 139
- Ocena
- 4,95
P
Printablesyahbluez
harp 120, the bridge tool
TL;DR Tool to figure out the bridge quality of printer + filament combination, between 20 and 120 mm in steps of 10 mm, needs less than 2g of filament and less than 10 minutes, save a lot of money. Collection tools, 3d printing Motivation…
- Pobrania
- 807
- Polubienia
- 56
- Ocena
- 4,86
P
PrintablesLeftcetio
Phoenixville Viaduct Model Railroad Bridge
This is an HO scale model of the Pennsylvania Railroad viaduct over the Schuylkill River in Phoenixville, Pennsylvania. The model was developed using information from HistoricBridges.org and Google Maps in Fusion 360. For more information…
- Pobrania
- 802
- Polubienia
- 55
- Ocena
- 5
P
PrintablesTriple G Workshop
DaVinci Bridge Puzzle Set
Each beam has 2 cut-outs on one side and 1 on the other. Face the side with 1 UP. Took me a few tries to figure out how to put it together. If you insert the crossmembers, you can lift them to insert the next set of beams. Yes you can put…
- Pobrania
- 796
- Polubienia
- 359
- Ocena
- 4,8
P
PrintablesChoumarin
Arch / bridge / tunnel for Lego train
This is an arch to create bridge and / or tunnels for Lego train tracks. It's designed to support 2 train tracks at their connection point. It measures 12 bricks high, which is enough for most trains, 16 bricks wide and 4 bricks long. It…
- Pobrania
- 788
- Polubienia
- 164
- Ocena
- 4,67
P
PrintablesPAMport
Bridge Test
Test if your 3d printer can print in the air 3D Benchmark Print settings: Infill: 100% Supports: No Layer Height: 0.06-0.2mm Speed: tested at 40mm/s and 60mm/s (the slower the better)
- Pobrania
- 780
- Polubienia
- 18
- Ocena
- 4,67
P
Printablesdusty
Mini Printer Test (Overhang, Bridge and String)
small and fast printer test with overhang, bridges and stringing tests…
- Pobrania
- 768
- Polubienia
- 44
- Ocena
- 4,78
P
Printablesdiktux
BRIO & Lego Duplo tunnel/ bridge crossing
Brio rails on the top as a crossing. Possibility to use the lower level as a tunnel. Can be extended with Lego Duplo. Can be stacked. Old version on the image
- Pobrania
- 766
- Polubienia
- 125
- Ocena
- 3,8
P
Printablesphysicalzero
Woodworking Joint Bridge Clamping Pad
Nice little gadget to help with clamping wood pieces that you are gluing together. You will need to print four of these to properly clamp two pieces of lumber together that you are gluing up. I hope you get some use from these. I printed…
- Pobrania
- 753
- Polubienia
- 156
- Ocena
- 5
P
Printablesmista_niku
Ray-Ban Folding Wayfarer Bridge Replacement
A replacement bridge for the folding Wayfarer sunglasses from Rayban. I initially thought the bridge was some kind of metal, but when it broke it turned out to be plastic (disappointingly). So why replace your pair or buy a costly (last…
- Pobrania
- 743
- Polubienia
- 19
- Ocena
- 5
P
PrintablesBV3D: Bryan Vines
Hovalin v5 Bridge Fix
This is a remix of the bridge part of the Hovalin, a 3D printable violin from Hova Labs (https://www.hovalabs.com/hovalin). The bridge part included in the Hovalin download from Hova Labs is too short. It doesn't hold the strings above…
- Pobrania
- 737
- Polubienia
- 42
- Ocena
- 0
P
PrintablesRobbert Laugs
Flexible wooden train track (ikea Brio)duplo adapter flexible bridge, ramp
printed with: 0.4 nozzle, 0.2 layer hight. add more or les between peices to make it longer or shorter. use a string of 1,75mm fillament as rope and with a drop of super glue at the begining and end it is secure. also a middle part, if…
- Pobrania
- 735
- Polubienia
- 325
- Ocena
- 5
P
PrintablesBootjevaarder
Railway Pedestrian Bridge H0 Scale
To print this model you need a 220 x 220 mm build plate. Print the bridge with support.
- Pobrania
- 729
- Polubienia
- 73
- Ocena
- 5
P
PrintablesIR Blinx
Fairy garden bridges
2 bridges for fairy garden bridges originally created for my niece
- Pobrania
- 728
- Polubienia
- 249
- Ocena
- 4,67
P
Printablesrasniel
Duplo/Lillabo bridge bricks
Yet another version of bricks to create bridges with IKEA Lillabo tracks and DUPLO bricks. Designed for an inclination of 2 DUPLO heights / 20cm track. Floor->Slope (bottom) Slope->Slope (middle) Slope->Bridge (top) Bridge->Bridge…
- Pobrania
- 719
- Polubienia
- 109
- Ocena
- 4,79
P
PrintablesLeftcetio
Ballast Deck Girder Model Railroad Bridges
This is a set of detailed girder bridge parametric models created with OpenSCAD that can be customized by changing the length and other details, and new styles can reuse the code. It started out with a design that is common on the…
- Pobrania
- 694
- Polubienia
- 67
- Ocena
- 0
P
PrintablesGuZZLo
Floyd Rose Tremolo bridge stopper
Got tired of trying to tune my electric guitar with the moving floyd rose tremolo bridge . Fixed it with this "stopper".
- Pobrania
- 685
- Polubienia
- 66
- Ocena
- 4,75
P
PrintablesTridense
Playing Cards Hardcase - Bridge Size Cards
This is a model I've designed myself. As the model is not behind a paywall, support is appreciated! https://www.buymeacoffee.com/Tridense The case is made for bridge-size cards, so they will not fit poker-size ones Bring the playing cards…
- Pobrania
- 676
- Polubienia
- 142
- Ocena
- 4,75
P
PrintablesIvanuel
3D Bridge
TEST YOUR PRINTER WITH 3DBRIDGE TEST MODEL! This model is designed for testing and benchmarking 3D printers 3DBridge is small and pretty fast print which takes about 2 hours With 3DBridge you can see how your printer performed at:…
- Pobrania
- 674
- Polubienia
- 70
- Ocena
- 5
P
Printablespbechard
N Scale highway bridge / overpass
Use this bridge set to have a highway overpass above your trains. The "short" piece can be used as is, and the longer piece is designed to that multiples can be glued together. In the pictures above, the long bridge is two pieces…
- Pobrania
- 665
- Polubienia
- 84
- Ocena
- 5
P
PrintablesMaurício Pessoa
Philips Hue Bridge 10-inch Rack Mount
A 10-inch rack mount for the Philips Hue Bridge. This mount has two versions. One with keystone slots and another without them. I've also included a .3mf file. This model is part of a series of 10-inch rack mounts I've designed. You can…
- Pobrania
- 663
- Polubienia
- 56
- Ocena
- 5