1078 modeli
Minimalist Duplo - Brio, IKEA, Wooden Train adapter that you can use for connecting Duplo bricks with wooden train tracks to make bridges and slopes. The peg on the outside is modified a bit so it fits on a Duplo brick too. Print with…
Wydruk około 0,85 €–1,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I've build a toy train (BRIO / IKEA compatible) that I've made for my son. This is the older model with 2 types of screws - the newer ones are far better designed and use only 1 type of screws for everything (check the link to my premium…
Wydruk około 0,61 €–0,75 € nettoWstępna wycena jednego wariantu
BNSF diesel locomotive toy train (BRIO / IKEA compatible) You will need the following screws to put everything together. 14x ISO 14585 (DIN7981) 2.9mm x 13mm ( https://amzn.to/3WgKty1 ) 2x ISO 14585 (DIN7981) 2.9mm x 19mm (…
Wydruk około 0,33 €–0,41 € nettoWstępna wycena jednego wariantu
Overview I had downloaded and printed some of the switches for brio as my son has several powered trains that need a guide. The issue with those is that the stick that comes out of the side blocks cars or ships on his playset and there…
Wydruk około 0,47 €–0,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tank car for toy train (BRIO / IKEA compatible). This is the older model with 2 types of screws - the newer ones are far better designed and use only 1 type of screws for everything (check the link to my premium toy trains below). You…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
Union Pacific toy train (BRIO / IKEA compatible). This is the older model with 2 types of screws - the newer ones are far better designed and use only 1 type of screws for everything (check the link to my premium toy trains below). You…
Wydruk około 1,92 €–2,34 € nettoWstępna wycena jednego wariantu
Norfolk Southern diesel locomotive toy train (BRIO / IKEA compatible). This is the older model with 2 types of screws - the newer ones are far better designed and use only 1 type of screws for everything (check the link to my premium toy…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
I always felt like most models used unnecessary amounts of filament, so I decided to try and create my own models with less material. It's still reasonably strong and prints quite fast and without supports. Recommended Settings: Material…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena jednego wariantu
Layer height: 4mm Infill: 10 (or 0) Support: no
Wydruk około 3,71 €–4,53 € nettoWstępna wycena jednego wariantu
This is my first assembly project with my 3D Print. This traffic light is comptatible with the Brio system and is easy to integrate. The round part can be directly painted in the correct color or can be printed in white and then colored…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
A support for the Ikea/Brio type train bridge. It will fit slightly larger than typical trains. If you like this model check out this collection of my other toy train models.
Wydruk około 6,25 €–7,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a simple pillar to raise the tracks to the “bridge” level, so the kids can lengthen the bridges and similar tracks. They can even be combined for two levels. Compatible with IKEA, Brio and similar wooden track sets. I printed mine…
Wydruk około 5,59 €–6,84 € nettoWstępna wycena jednego wariantu
This traffic signs come in 2 seperate parts to glue together. The different colors can be done by changing the filament for the last 4 layers (0.2mm layerhight)
Wydruk około 3,04 €–3,71 € nettoWstępna wycena jednego wariantu
Here we'll see how 3D printing can be used to repair a cabrio rooftop for few Euro cents On my Volvo C70 convertible, the roof sky is bent and unfolded by a complex system of strings that are hung at specific locations on the roof sky via…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You cannot mount a light bar and a webcam on top of a screen, as the mountings and cables can get in each other's way. So you have to stack the two devices somehow. In this case, a Xiaomi Mi Computer Monitor Light Bar and a Logitech Brio…
Wydruk około 3,41 €–4,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Le raccord permet de relier les rails en bois du train électrique. Le diamètre des parties circulaires est de 11 mm et la longueur hors-tout de la pièce 34.4 mm. L'épaisseur est de 12 mm.
Wydruk około 0,65 €–0,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
(English below) Modell eines Audi Cabriolet (Typ89, Baujahr 1991-2000), entweder in der Ausführung "Serie" (seriennaher Zustand) oder “Tuned” (mit Tieferlegung und Rieger RS2-Frontschürze). Es eignet sich ideal als Schlüsselanhänger für…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
English: Well, I don't know if it was logical to think of this remix, but seeing how my nephew put "Cuca" on the train tracks and how he likes this train, I think it was logical. See the correct mounting of the wheels. Check that they…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Náhradní klika pro spolujezdcův úložný prostor, tvar je upravený z důvodu lepšího povrchu a vyšší pevnosti. Původní klika praskla z důvodu únavy materiálu.
Wydruk około 0,97 €–1,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Want to reuse toys you already have in a new way. Why not challenge your fantasy by making gigantic bridges and ramps with wooden trains (like Brio or IKEA) with help of simple Duplo bricks. These adapters will make this happen! I got…
Update V2: I completely rebuilt the Duplo connector. I changed three things of the original "Minimalist Duplo - Brio, IKEA, Wooden Train adapter" with Tinkercad in order to fit my needs: I reduced the inside height of the Duplo connector…
Various connectors compatible with Brio, IKEA Lillabo (old plastic dogbone and current wooden-only version too), Thomas Train, Kaufland, LIDL Playtive, kmart, ebay,... wooden tracks. UPDATE: 30 mm male-male connector! Print instructions…
Various Brio train tracks and switches Lots of track study and design for the joy of the kids :-) Thought I'd make it publicly available to play with. Let me know if you need another one, a combination, a female only track and so on! If…
Based on my basic Brio rails [1], I created flexible/bendable rails in three different sizes (S, M, L). I find these rails pretty helpful, as sometimes you just need on little rail that's missing and with these flexible rails, you can…
This set includes two ramps and a trestle style support for building elevated tracks. The ramps are a bit too steep so most trains with scrape a bit when going up or down. But I wanted to make the ramps tall enough that trains could fit…
Bridge pillar compatible with Brio, IKEA Lillabo (old plastic dogbone and current wooden-only version too), Thomas Train, Kaufland, LIDL Playtive, kmart, ebay,... wooden tracks. UPDATE: Double height bridge support added! Print…
Reuploaded LocoRico flexible brio compatible train track from Thingiverse, original URL is https://www.thingiverse.com/thing:5019335 . Check that URL for licensing requirements (currently, but this might not be accurate when you're…
Bilder sagen mehr als 1000 Worte Pictures say more than 1000 words Category: Construction Toys
I wasn't quite happy with all the existing options so I took ideas from several places and put them together to make just what I was looking for. I hope it fits your needs as well! I designed these to fit my Brio and compatible tracks, so…
Compatible with Brio, IKEA Lillabo (old plastic dogbone and current wooden-only version too), Thomas Train, Kaufland, LIDL Playtive, kmart, ebay,... wooden tracks. 60 mm lenght. Print instructions Support: NO, Infill: 15 %. CHECK OUT…
This is a tunnel remixed from BasD's "Model Train Tunnel". The tunnel is scaled to fit common wooden train track systems (e.g. BRIO, IKEA etc.) and has flattened bottom. There is an addition track of 162mm (in BRIO terminology A1+A2)…
Arched Brio ramp, in addition to my Brio collection. https://www.printables.com/model/279651-brio-brio-brio-more-than-20-rails-and-switches You can print it without top and bottom layers. I've sliced mine into 2 parts – have a look at the…
Male-Male Brio Connector Female-Female Connector: https://www.printables.com/model/449679-brio-connection
Flexible rails for IKEA LILLABO, BRIO, LIDL train track Flexible rails which help to easily build the train track compatible with IKEA LILLABO, BRIO, LIDL The difference of this rails is the end - sometimes you need male-male of…
Brio compatible bridge set for Lego Duplo compatible pillars Description The provided STLs are for a 150mm straight rail in between and 2 Duplo brick pillars to reach Brios standard bridge height of about 60mm. Feel free to download the…
Manually operated train switch. just click it together. finally had the time to print it, and clicks together very well stick(control rod) in 4 types of thicknes to create enough frixion to stay in place when the train passes. (I printed…
My daughter wanted a place for her trains to sleep so I designed and printed this for her. Designed to print without supports.
Die Adapter passen auf Duplosteine, nebeneinander passen sie nur falls der Drucker sehr genau arbeitet und eher unter- als überextrudiert. Die oberen Noppen nehmen zwar Duplosteine auf, klemmen aber nicht.
You only need a little of glue to join the wheel axles. Recommended print settings - Infill: 15 %, Supports: NO!, Layer height: 0.2 mm. Note: Lego tolerances are very precise and your printer may not meet them. Maybe you will have to fine…
This is a tunnel remixed from my remix of BasD's "Model Train Tunnel". The tunnel is scaled to fit common wooden train track systems (e.g. BRIO, IKEA etc.) and has a flattened bottom and an overpass that crosses the mountain…
Update: 23.01.2014 added separate files for each curved track also added a new radio curved track for really big curve :-) The normal curve should be the Kurve_180_45.stl Bilder sagen mehr als 1000 Worte Pictures say more than 1000 words…
Basic 45° small double switch track compatible with Brio, IKEA Lillabo (old plastic dogbone and current wooden-only version too), Thomas Train, Kaufland, LIDL Playtive, kmart, ebay,... wooden tracks. Support: NO, Infill: 15 %. CHECK OUT…
Does your child ever need just a few more track pieces or a track piece that doesn't exist? Now you can fix that with 3D printing! There are currently 30 track shapes, with 199 unique variants! Track types: Straight 39 variants (length,…
Five straight tracks are compatible with Brio trains. 20, 14 cm, 6 cm long. They fit perfectly. male-male; male-female; female-female. ⚠ Compatibility Note: This model is designed to strict original BRIO® standards for a perfect fit.…
My version of 180° Brio Uphill Track All credits to: @JohannesE
This mod is now available for the VXE R1 as the MAD R is discontinued: https://www.printables.com/model/1387034-kabrio-fingertip-mouse-mod-for-vxe-r1 I've tried a couple of 3D printed fingertip mice but none of them were comfortable for…
This is a simple plate that allows you to add lego buildings next to your brio track. It also allows you to build multilevel train stations ;). Category: Toys & Games
A print-in-place replica of the original logitech cover. Print instructions Printed on my MK3S in PLA at 200um layer height and no support. Update 20210207: On the first version, the lid did not close perfectly. I have slimmed the lid by…
Bilder sagen mehr als 1000 Worte Pictures say more than 1000 words printing on the sind works for me .. a new version v2: a little higer so that can drive an train under the upper rails Category: Mechanical Toys
Bridge support compatible with Ikea and Brio wooden train track. Minimalistic design that allows great variability of use. Main features: Tracks connector for better stability Stackable to create higher bridges Easily printable without…
Basic 45° small switch track compatible with Brio, IKEA Lillabo (old plastic dogbone and current wooden-only version too), Thomas Train, Kaufland, LIDL Playtive, kmart, ebay,... wooden tracks. Support: NO, Infill: 15 %. CHECK OUT other…
This VW Beetle Convertible have the same chassis as my other Beetle Baja Bug 5mm axel L=68mm If you have any questions, let me know in the comments or on my YouTube channel . You can also follow me on Instagram to see the designs i'm…
End track compatible with Brio, IKEA Lillabo (old plastic dogbone and current wooden-only version too), Thomas Train, Kaufland, LIDL Playtive, kmart, ebay,... wooden tracks. Print instructions Support: NO, Infill: 15 %. CHECK OUT other…
Brio print comptatible with the Brio train system. Fun cheap part to print to improve the Brio system of your kids! Comments appreciated for improvements.
Title: Double Wide U-Turn - 3D Printable Wooden Train Tracks As a passionate 3D modeler with fond memories of playing with wooden train tracks growing up, I'm excited to share my collection of 3D printable train models. Inspired by my…
First, many thanks to Romain for inspiring this remix. My grandsons only know full speed and sometimes stop. So, the yellow caution lamp was replaced with a sliding shutter, exposing either the red or green ‘lamp’. Gravity reared its ugly…
There are already many BRIO (compatible Tracks) here in printables. This ones might be the same as others, but are fully measured, drawn and printed by me. Printing with wood filament almost looks like original. I used PETG Filament as it…
This is a fingertip mod for the VXE R1 and its versions. The weight comes in at 26 g when printed in PLA using my settings. Please let me know if you have issues with the mod, so I can fix the design. My hand size is 18x10cm and I use an…
Remix of original Duplo/Brio Car from timqui - train wagons compatible with Lego Duplo bricks and can run on all basic wooden (Brio) tracks. In the original model, I missed the possibility to connect wagons to each other - so I decided to…
Brio Track Adapter, to connect two male or two female tracks. Category: Toy & Game Accessories
Single sided since it can be rotated to fit any orientation. Easy to print. Double sided version because it feels right that way. Print with supports/brim.
Title: Curvy Track - 3D Printable Wooden Train Tracks As a passionate 3D modeler with fond memories of playing with wooden train tracks growing up, I'm excited to share my collection of 3D printable train models. Inspired by my mom's…
I designed a few types of train containers that suit IKEA / BRIO tracks. Use the following screws to put each container together. 10x ISO 14585 (DIN7981) 2.9mm x 13mm 2x ISO 14585 (DIN7981) 2.9mm x 19mm Add ring 10x4x5 neodymium magnets…
Bilder sagen mehr als 1000 Worte Pictures say more than 1000 words Category: Mechanical Toys
A connector to join two brio tracks.
Simple Brio/Thomas/Ikea/etc train track connector Category: Construction Toys
Overview Building on a previous design (Brio - Mechanical (Geared) Interchange/Switch - M1 Track) https://www.prusaprinters.org/prints/59955-brio-mechanical-geared-interchangeswitch-m1-track I wanted to see if I could shrink the design…
Brio rails on the top as a crossing. Possibility to use the lower level as a tunnel. Can be extended with Lego Duplo. Can be stacked. Old version on the image
Regular triangle rail cross for wooden railway by Ikea, Brio, ... Recommended printer settings: Perimeters: 3 Layer height: 0,2-0,3mm Infill: 10-20%
printed with: 0.4 nozzle, 0.2 layer hight. add more or les between peices to make it longer or shorter. use a string of 1,75mm fillament as rope and with a drop of super glue at the begining and end it is secure. also a middle part, if…
Red engine locomotive toy train (BRIO / IKEA compatible) You will need the following screws to put everything together. 10x ISO 14585 (DIN7981) 2.9mm x 13mm ( https://amzn.to/3WgKty1 ) 4x ISO 14585 (DIN7981) 2.9mm x 19mm (…
I've had the problem that the tracks in the brio goldmine always separated, and the trains got stuck. So I designed this clip to hold brio tracks together. One version of the clip needs support structures but holds the tracks better…
Title: Bumpy Track - 3D Printable Wooden Train Tracks As a passionate 3D modeler with fond memories of playing with wooden train tracks growing up, I'm excited to share my collection of 3D printable train models. Inspired by my mom's…
The original model from thingiverse.com called “Brio/ Thomas rail switch (Duplo design)” by FuriousSun is quite nice. However, I think having female connectors on one side, but male connectors at the other side fits better with the…
If you have the print set up well enough, the wheels should fit onto the axles so they can spin.
Title: Small Male-Male Flex Adapter - 3D Printable Wooden Train Tracks As a passionate 3D modeler with fond memories of playing with wooden train tracks growing up, I'm excited to share my collection of 3D printable train models. Inspired…
Very simple Brio/Ikea compatible train station. Print instructions I recommend glueing the station into the prepared holes in the track to prevent the legs from breaking.
German: Dieser Adapter ermöglicht die Verbindung von Duplo-Steinen mit Holzeisenbahnschienen, ideal für den Bau von Brücken und Abhängen. Der äußere Zapfen wurde modifiziert, um auch auf einen Duplo-Stein zu passen. Verbesserungen:…
Title: Small Female-Female Flex Adapter - 3D Printable Wooden Train Tracks As a passionate 3D modeler with fond memories of playing with wooden train tracks growing up, I'm excited to share my collection of 3D printable train models.…
I printed it with my MK4S as follows: .4 nozzle .28 draft preset (prints in 1h39m) PETG 4 perimeters 15 % infill Would love to see your makes! :)
Title: 180 Degree Turn - 3D Printable Wooden Train Tracks As a passionate 3D modeler with fond memories of playing with wooden train tracks growing up, I'm excited to share my collection of 3D printable train models. Inspired by my mom's…
This is improved version of the great model heavily modified by Rod. I tweaked a stiff shutter mechanism to move a bit more freely and added tracks in two version - for IKEA tracks and for any other brand (Brio, Bigjigs…) as IKEA is using…
This is a very basic pillar for Brio train tracks. You can print it without any top and bottom layer and play around with your favourite infill patterns :-) PLA 0.3 mm layer height 2 perimeters In addition to this collection:…
Stackable tower for Brio/Ikea wooden train sets. Printed in PLA with 0.6mm nozzle. 2 walls and 40% infill.
Basic 45° short curved track compatible with Brio, IKEA Lillabo (old plastic dogbone and current wooden-only version too), Thomas Train, Kaufland, LIDL Playtive, kmart, ebay,... wooden tracks. Support: NO, Infill: 15 %. CHECK OUT other…
A turntable for wooden trains with one curved and one straight track on the turntable. The turntable has been optimized, such that it works well with electrical brio trains too.
Printed on it's side, 3mf file should be oriented correctly. Needs supports, personally I used snug grid support under the green areas as follows: I recommend printing support interface layers using proper support material, or PETG if…
About the design I designed my own 180° Uphill Track that fixes two issues I had with the track from Cannela Verde : The Angle is wider, so the trains, even three-axle trains, fit better on the track, even electric trains are able to…
Print with PLA @ 0.20mm, 20% without support 2 files attached - stl file for 3d printing - fusion360 f3z file to improve the model
Female-Female Brio Connector Male-Male Connector: https://www.printables.com/model/452056-brio-connector
A toy train pylon that grabs the tracks for better stability. The way it is designed it can be printed without supports and bridging only. The heights of the cross connections of the pylon are slightly shifted such that a nice bridging…
Bilder sagen mehr als 1000 Worte Pictures say more than 1000 words had updated the file because of better fit and more stable works fine my son love to open and close it :-) Category: Mechanical Toys
VW GOLF 2 / Golf 3 Cabrio Emblem Marked by Original VW Part 1H6 853 630(3A9 853 630) Fussion360 Model https://a360.co/2CZI3wc Update angle adjusted by letter I made two different prints. once lying down and standing. because of curvature…
Original model: https://www.thingiverse.com/thing:2546149 (all credit goes to erie user) This model is scaled down to 98% of the original model size to fit IKEA wooden rails perfectly. The main advantage of this connector is its…
Simple but very useful Brio rails and connectors that every track builder needs. For the basic F-M rail, I added 3 different sizes. I added a gcode file with all 5 types/sizes, which takes 5 hours with the recommended print settings.…
Brio compatible locomotive based on various designs I tried. Print instructions This is a Brio compatible locomotive based on various designs I tried. http://www.thingiverse.com/thing:3338151 https://www.thingiverse.com/thing:4199752 My…
A set of Brio/Ikea traintracks to Duplo connectors. Various types (compact, large, with hole). Material: PLA+ Resolution: 0.4mm Supports: No Rafts: No
