Liczymy pasujące modele…
This chunky boy can hold plants, pencils, and much more for you while being a happy fella. Every make will be featured on my Instagram add your handle and follow me :) Check out my Instagram if you want to see more designs like this or if…
Wydruk około 15,24 €–18,63 € nettoWstępna wycena jednego wariantu
Remodeled the whole thing and wanted to give everyone the freedom to do adjustments themselves.
Wydruk około 8,30 €–10,15 € nettoWstępna wycena jednego wariantu
Céčka mého vlastního designu, jsou tedy mírně jiného tvaru a rozměrů než ty “klasické”. Céčka mají osmiúhelníkový průřez pro lepší tisknutelnost. 3mf model obsahuje 5 ks od každého (18 ks) modelu (urychlení vlastníkům pomalejších PC -…
Wydruk około 1,32 €–1,61 € nettoWstępna wycena jednego wariantu
IMPORTANT! I heard from a friend that his set were loose, and asked him to show me. Turns out he was using an entirely different set of screws. This was dangerous on his part. Remember that using power tools can be dangerous, even life…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My RoboVac tends to get stuck under objects which are just the right height for it to fit under and not be able to leave, especially the fridge and some rolling chairs. This bumper lip raises the height of the bumper by 3.6mm to prevent…
Wydruk około 2,86 €–3,49 € nettoWstępna wycena jednego wariantu
Stencil, wall art: Bumble-bee (one colour, two colours)
Wydruk około 0,97 €–1,18 € nettoWstępna wycena jednego wariantu
🔫 Introducing the Bump Stock Extension for Micro Roni Gen4 by Veracon Engineering! Enhance the stability and control of your Micro Roni Gen4 with our custom-designed Bump Stock Extension. Engineered for precision and compatibility, this…
Wydruk około 3,26 €–3,99 € nettoWstępna wycena jednego wariantu
Simple Doorstop/Bumper for the Handle
Wydruk około 0,31 €–0,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted a case to hold the 7 key set to keep the keys easily accessible, and a key ring was not working. There is a standalone case to hold the 7 keys and 2-3 rubber rings. There is a tight fitting cover that works well if you have a…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
Door stop with a bumpy profile for increased grip
Wydruk około 0,44 €–0,53 € nettoWstępna wycena jednego wariantu
Simple GoPro mount for the iFlight BumbleBee Cinewhoop. Made with PLA/PLA+.
Wydruk około 1,29 €–1,57 € nettoWstępna wycena jednego wariantu
Compliant connecting mechanism that I presently don't know the proper name for. Print in PETG or ABS/ASA. I would not recommend PLA. Fusion 360 CAD file attached to edit thicknesses for different materials.
Wydruk około 0,31 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a bumper to go over the screen, ideally to prevent a screen protector film from pealing up during use. Will work for only a Apple iWatch which is 44mm (iWatch 4 and earlier?)
Wydruk około 0,12 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
𓊍 THE HARMONY CODEX I came here searching for something But I don't remember what that thing is anymore Did I dream you? Or are you dreaming me now? I love Steven Wilson's music, and so I created a set of 3D printable abstractions to…
Wydruk około 0,71 €–0,87 € nettoWstępna wycena jednego wariantu
Updated to have no bottom in the screen protector. This accomplishes two things. First and foremost the new style LCD fits. Other than that it makes it easier to keep neat and tidy without having tiny bits of filament caught in the tray…
Wydruk około 5,66 €–6,91 € nettoWstępna wycena jednego wariantu
Super simple head lamp brkt this one is made for a 1 inch thick strap but will work for several sizes. I printed it on its side so it wouldn't need support. i also made mine out of asa just cause that's what was in the printer at the…
Wydruk około 1,55 €–1,89 € nettoWstępna wycena jednego wariantu
So this is and addition to the other brkts i made, they didnt hold the actual lamp in place for me, so i made this to try and keep the light from doing whatever it wants and keep it where i need it. fits a standard bump cap i figure it…
Wydruk około 0,61 €–0,74 € nettoWstępna wycena jednego wariantu
Zrobiłem niestandardowy przedni zderzak do Babyape 2 w DarwinFPV
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
Recordings (2001) I woke up and I had a big idea To buy a new soul at the start of every year I love Steven Wilson and Porcupine Tree's music, so I created a set of 3D printable abstractions to represent his discography. These Porcupine…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
A bumper for Adafruit's FeatherWing Quad 2x2.
Wydruk około 1,87 €–2,28 € nettoWstępna wycena jednego wariantu
🌌 THE OVERVIEW I incline myself to space There was no ghost on the moor No open window No monkey's paw I love Steven Wilson's music, and so I created a set of 3D printable abstractions to represent his discography. This can be used as a…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena jednego wariantu
The Bumble-Volt: Honeycomb Cell (Nikon EN-EL15 Battery Vessel) Never let a dead battery kill the shoot. The Bumble-Volt: Honeycomb Cell is a rugged, compact, and highly ergonomic battery vessel designed specifically for photographers and…
Wydruk około 4,14 €–5,05 € nettoWstępna wycena jednego wariantu
Print info Nozzle: 0.4 mm Infill: 0% Supports: I use Snug supports, need to be painted like on the picture below Model Overview Two versions of Cats: Normal (white one) , Fluffy face (black one). Made bumps on face and paws so its easy to…
Corner bumper prints without any supports. Use a hard TPU if possible but even some regular PLA is better than nothing. If you have adhesion problems use a brim. Use some double-sided tape to attach.
FOR COMMERCIAL USE: Check here Introducing the Bum Buddy - your ultimate travel companion for a refreshing clean! Simply screw it onto any standard PET bottle like a bottle cap to get yourself a portable bidet in seconds! With its…
Compatible with propeller shields: https://www.printables.com/pl/model/867950-dji-avata-2-propeller-shields Print with PLA , and secure with cable tie. 17.5 g each Note about left and right files: They are almost identical. After putting…
D: Schutzhülle für das Apple iPhone XR. Ich habe zwei Modelle gezeichnet eines mit Rückseite und eines ohne (Bumper-Hülle). Ich habe die Hülle in PLA als harte Hülle und in FLEX als flexible Silikon ähnliche Hülle gedruckt. Die Hülle ist…
Remix of: https://www.thingiverse.com/thing:6341148 and https://www.thingiverse.com/thing:2596157 I have used a different skull that is simpler to print and much faster to print (half time for my settings). I used PLA-CF which came out…
Aus dem Remix von BanditFPVprints geremixt komplett umlaufend zusammengebaut mit Tinkercad. Ausdruck in TPU, Hält wie das Original auch ohne klebeband.
This is a thin, light weight case for the Samsung Galaxy Fold 7. Your printers needs to be dialed in as there are lots of overhangs, thing spindly bits. and even some straight up unsupported lips. I printed with no supports, .12 layer…
Use this in combination with the speedbump riser that you can download here: https://www.printables.com/model/536359-creality-k1-riser-the-speedbump-closed-and-ventila Printed in ABS supports are needed and you can use the standard bolt…
Try out BumpMesh.com ! BumpMesh is a free, open-source, browser-based tool for applying custom displacement textures to your 3D models - no account, no software install, and no expensive licenses required. Simply load your STL, OBJ, or…
Riser that makes room for the canbus chain to move in a safe way instead of bunching up in the corner with the chance it unlocks the extruder (it happend twice) Both ventilated and closed models for download Supports are needed for all…
WHY? I love my BambuLab X1 Carbon, yet it makes a hell of a noise. I do not have a basement or garage to put it in, so it needs to quiet down. Slowing down the chamber fan in the print profile has a huge effect, but I needed more. So, I…
Very quick remix of my original hook, but with an anti-rotation feature to keep things from swinging. Prints on it's side with no supports. Recommended to use 100% infill and use PETG or similar stronger material if you plan to hang tools…
This is the Bumblebee from the Transformer IV movie. For printing in FDM you will need to scale up the model. Printing with SLA works great - with a lot of support structures. Original designed by Tommy Kong ( thing:416742 ) and remixed…
Einfacher Kantenschutz für die navimow i Serie. Sie sind straff entworfen, so dass ein Aufstecken genügt. Es ist kein Schrauben oder Kleben erforderlich. Ich habe mit PETG gedruckt / 100% Infill
Remix of Yet Another Apple Watch Stand with holes on the bottom for rubber bumpers (I used 10mm diameter, 3mm thick adhesive rubber bumpers)
Hiya! This is a printable Bumper case for the Nothing Phone (1). I wanted a case for it but couldn't find any available at launch so I just made one ;) This is designed in a way that's a little on the thick side. But has cutout's for the…
* UPDATE: I made V2 with looser tolerances, V1 was a bit tight and needed too much sanding to fit. * UPDATE2: V3 further enhances strenght, more space for the foot bolt too. Length : 127mm Base : 17mm X 17mm Should be pretty perfect scale…
Printed on an Ender 3 V2 20% infill Rafts Support Surface Ironing enabled, 10% extrusion PLA, 201°C Nozzle, 60°C Bed There are a lot of these types of Models online, take a look the first picture to see if your dimensions match with my…
Older model i never Published PLA: Fiberlogy Printer: CE 6 Program: fusion 360, made to protect the PSA slabs, print needs support, slide in carfully (slight presure fit) Enjoy, non comercial
i got really tired of thin pushers on 1914 bumper, that brake in like 5 min of usage. so i designed spacers u can print youself. they fit tight and not tend to break, cuz they are not part of bumper itslef. place seam on the back(up)…
G1 Transformers Bumblebee Transformers stl fully articulated model but not transformable. Disclaimer: Contains small parts and requires high precision. Your printer may need to be properly calibrated for best results. This model is for…
A very quick to print edge protector for the raised edge on the pebble time 2 screen. Scale the model up or down slightly to get the best fit. Pictures show galaxy black PLA using a 0.6mm nozzle, and orange and matte blue PLAs using a…
This is a remix of the great DJI Avata 2 bumpers from Kucici. I did make a slight modification which prevents having to use cable ties. I simply added a lip to the bottom support which allows the bumper to clip perfectly in place and is…
This version combines Kucici's excellent DJI Avata 2 Bumpers and Propeller Guards into a single model with the addition of clips to hold them firmly in place on the DJI Avata 2. Propeller guards have also been modified to provide better…
Bumper guards for DJI Avata 2, fits in original holes but you will need 4 longer screws M1.6x10mm. Printed with PETG 100% infill, 0.15 layer, without supports.
A variation of my other corner protector, optimized to be printed in TPU. Use “Avoid Crossing Perimeters” to get rid of any stringing. Scale it for your application.
It is difficult to print this accurately since there is no good orientation. The originals (in colour) are most probably injection moulded. I printed it horizontally , the top side came out amazing with ironing but the bottom side…
A simple shackle for my Traxxas TRX-4M Defender bumpers. Printed in resin and painted. Paper clip can be used to be pressed in to fasten it to the bumpers. Drop of glue might be needed at the ends to secure the paper clip in (I did not…
Google Pixel 7 Pro Bumper case the same as Rhinoshield made 5 years earlier, I really wanted to have the same awsome thing they made for my pixel 3. The fit is really thight, if printed with PETG I recomend to scale it up 0,5 % or 1%…
The Safety doorstop prevents the door from slamming abruptly by gently cushioning it. This can, for example, prevent small children's fingers from being crushed when the door closes due to a gust of wind. This also prevents glass breakage…
This was remixed from RaffoSan's original & pbpunk's (From Thingiverse) Designs to create a more ascetically pleasing bumper set. I have 2 versions, A single-piece drop-in setup, and a 2 piece left & right. This may require more finesse…
Fits the TBS source one V5. A simple bumper to keep the bottom plate from being smashed up in a crash. Print in TPU with the opening down and supports for the holes only. Use the printer settings that work best for your printer.
I couldn't find any S20 FE phone cases online and decided to make my own. This design was made do be an improvement of my previous design linked below. The case once printed should easily pop onto your phone one corner at a time (ending…
UPDATE 05/07/2025 : the step files are now available ! I originally created this high clearance / low profile bumper for the Trx4m Bronco to solve the issue of poor attack and departure angle, as well as to reduce rubbing of the wheels…
Nozzle: 0.4mm Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. A brim is recommended to make sure it doesn't lift Filaments Used: PLA Elegoo/Sunlu Black Transmission Distance: 0.6 PLA Elegoo Gray…
I used the recently released parametric CAD files from Core Devices (thanks, Eric!) to design a sleeker Bumper Case from scratch. I printed this with a 0.1mm layer height on my Prusa Core One and Prusa Mini. I've successfully tested it…
Compatible with: V0 Kirigami Bed Salad Fork / Tri-Zero / Pandora's Box anything with an extrusion to attach it to Supports the Rainbow Barf Logo LED or a Neopixel Mini Button BOM Item Qty. M3x5x4 Heatset Insert 2 M3 Hex Nut 2 M3x6 BHCS 4…
A file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model, but…
My wife had a fall damage on her little Bosch KIOX and I thought it could help some bikers to get a protection case. It was a challenge to copy the shape and it took some iterations of the design, but here it is: A formfitting case to…
Bumper cars SCAD files and STLs for bumper cars tokens and parking keys. These files should be compatible with hardware produced by "SOLI Bumper Cars" , which can be commonly found (AFAIK) in the Northeast area of Italy. Token Tested and…
This is a remix of https://www.thingiverse.com/thing:3082571 to split the helm and facemask into separate pieces to allow printing in different colors.
Are you a fan of minimalism and also like to display your "now playing" album? Then you will surely appreciate this stand! The geometry of this stand was chosen so that the album's centre of mass is always supported and won't exert…
Hey Dan, sorry it took so long : ) Just wading through my requests where I can. I tried pulling the first helmet from my orriginal upload and it was very difficuilt and not the best outcome, but I uploaded it here any way. I then found a…
This is a compilation of body accessories I designed for the TOPLIINE FC3S body I'm using on my 1/10 RC drift car. Pop-up assembly: All of these parts can be attached with clear Gorilla double-sided mounting tape. It is strong enough to…
Rotary Photo Album The Rotary Photo Album is designed to store Instax Mini Photos. Turning the device simultaneously lowers pictures while raising new ones. Prints I printed this on my Bambu P1S. I tested that the top and bottom could be…
I have got myself an iPhone 14 Pro. Naturally I need to make this, just like 2 years ago ;) I added two cat ears to make sure when set on a flat surface, the cameras will have a 0.5mm clearance, and the entire phone doesn't teeter-totter…
Title: Bumpy Track - 3D Printable Wooden Train Tracks As a passionate 3D modeler with fond memories of playing with wooden train tracks growing up, I'm excited to share my collection of 3D printable train models. Inspired by my mom's…
Roomba robot vacuum bumper extension prevents robot from getting stuck under furniture. Attach with VHB tape to the top of the bumper. Window allows IR sensor to find docking station.
Bumble Snow Monster: Rudolph the Red Nose Reindeer. The one thing about Bumbles → Bumbles Bounce. Tree topper Version Included. His teeth are bad. He really does need a dentist. Suppose I should do a Hermey
This mini polaroid book prints in just a few hours and requires minimal assembly. Standard 1.75mm filament can be used to create a hinge for the front and back cover. The spine requires minimal support during printing, organic support is…
Replacement for bumpers for H0 (1:87 scale) model train. Made for old PIKO models but could fit to various brands. Printable on UV resin printers with time approx 1h with layer 0,05 mm.
This was designed to be functional first, then aesthetically pleasing, with realism and scale being my least concern. I wanted a "bumper" that was actually a wheel stop. I did not want my couplers crashing into anything, and I didn't…
I'm not very fond of full-on cases, not to mentioned that they make the already large iPhone 15/16 Pro Max huge. I had already designed a bumper for my Apple Watch Ultra 2 (check my profile) and thought of doing the same for the iPhone…
Redmi note 13 cover and camera bumper. Please read the text file before the customizing.
This is a model for a bumper case for the iPhone 13 Pro Max. It has a strap in the back to help you hold it with one hand. I printed it in TPU with a 0.15 mm height. It does need supports.
This Bumble Bee Tissue Box holds a standard toilet tissue roll and the tissue is threaded out through the hole in the top to make the wings. Body prints without supports, Head needs supports touching buildplate. The stripes are created…
Iphone 15 Pro Max Bumper Case made in Fusion 360 you can probably get away with no supports but still easy to remove.
This was made by modeling a simple outer geometry, then subtracting a slightly-enlarged mesh of the watch from the official Pebble repo. This was a quick and dirty lunch-break project, so there is a lot of room for improvement I'm sure.…
Supports: No Resolution: 0.2 Infill: 20%
Jurassic World Camp Cretaceous Bumpy
Keeps the R36S protected pretty well! Print with the screen side up, paint supports near the triggers and around the smaller button holes. Have some precision scissors ready to get rid of stringing! I printed this with Overture high speed…
Use a 25mm M3 bolt and nut and an 8mm diameter spring.
Articulated Bumblebee with heart variant Designed by Teal Cat Creative Please support our work and purchase a commercial license via our Patreon if you intend on selling our prints!
da stampare con materiali resistenti come il PETG-CF, nel mio caso ha funzionato benissimo. Ho voluto postarlo anche qui in quanto il modello è presente solo su makerworld Ringrazio l'autore “ Sade Daniels ”
The first design (dummy) was created by Paperpilot and was discussed here . I have remixed the design from Warc , adapted it and made it ready to print. Thank you for the work. I moved a few things around until it fit for me. From that I…
[ITA] Dimensioni: Diametro Gettone : 34.88mm Diametro Estrusione Interna : 21.55mm Diametro Foro Interno : 10.91mm [ENG] Dimensions: Token Diameter: 34.88mm Internal Extrusion Diameter: 21.55mm Internal Hole Diameter: 10.91mm
Supports will be needed when printing the album name plates. No supports necessary for the shelf prints. Print with 0.20mm in either PETG and PLA. Album name plates are designed to be removed/replaced in case of accidental damaged during…
This add-on improves the filament retraction of the spool in Creality CFS, by eliminating the friction between the factory bumpers and the spool, which can become problematic as spools get lighter with less filament on them. Also no more…
Update: shout out to @kull_1740928 with a great suggestion. Added D-pad offset. Apple TV 4K remote TPU bumper will help protect your remote control from nicks and scratches. Also easier to hold the remote. Printed using TPU with no supports
**Work in Progress** Tested** *Updated - May.25.23 *Made For iFlight Chimera7 Pro V2. Can fit other 7-7.5 inch models, Verify yourself** • Prop Guards V6.4 - I added MT30 Connector Holders with 2 Zip Ties slopes. • Prop Guards V6.3 - I…
Vodící lišta pro sekačku PARKSIDE PMRA 20
This Case is designed as flexible Bumpercase to protect your Google Pixel 6 against minor impacts and hits. The backside is as thick as the camera kit protrudes, so you have a homogeneous flat surface. It has cutouts for the speaker /…
It is a Bum Bag Clip Printed with clip is a Bum Bag for him Printed without is small purse for her No Support required. Clip will slide into place after print Print instructions PETG preferred but PLA works too I still have to find a good…
I really liked Todd Pousson's design for an Olympic Barbell Vertical Wall Mount , but wanted to mount the barbell holder on a brick wall and use larger bolts to secure it. I designed the mount from scratch and added in the required holes…
![[ITA] Gettone Autoscontri - [ENG] Bumper Cars Token](https://media.printables.com/media/prints/271093/images/2412960_abed072f-3dd0-4817-a141-e4ef9ddc84e3/1.png)
