7013 modeli
An easy to print snappy fidget toy. https://youtu.be/HrO0uZ5QgzI Printing All parts can be printed without supports. Add a brim if your printer has any difficulty with curling around sharp corners. The Button caps can be printer either…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
Storage boxes for coin cell / button batteries Also included customizable Fusion360 parametric model (battery size & quantity) Printed on modified Ender 3 at 0.2mm height
Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu
🤨 Update 3/1: WE GOT THE GRAY TROPHY LET'S GOOOOOOO (seriously somehow I've had a lot more trouble getting one of the gray ones than the gold one) Update 2/16: v2 has been added! This one is a little more stable. Also, now I have a…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
With the click button you get a working ballpen mechanism in a compact form. No support is needed. And with the following assembly video you are good to go (video contains old parts). To ensure proper clicking head for these points:…
Wydruk około 2,72 €–3,32 € nettoWstępna wycena jednego wariantu
I wanted to have a nice front panel for my Ikea Lack Enclosure with some buttons to turn on the printer, some LED and the Raspberry Pi. I designed this really simple front panel with three holes (20mm) for the buttons and on the other…
Wydruk około 5,84 €–7,14 € nettoWstępna wycena jednego wariantu
[Update Nov.23, 2021 : I came up with a variation on the original design; this second version works betters on some seatbelts. See the additional files with “06” in the name.] You can mail order one of these for $1 and wait a week or…
Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu
Full Collection: https://www.printables.com/@TripleGWorkshop/collections/673389 ------------------------------------------------------ Color order: Red, White. Quick Guide to changing filament~ Have some paper to push away extruded…
Wydruk około 2,64 €–3,23 € nettoWstępna wycena jednego wariantu
I designed yet another No Touch Tool, did it retractable because if the areas that may touch contaminated surfaces are not enclosed somehow they may contaminate others like your pockets or your hands after it has been use. This tool is…
Wydruk około 4,82 €–5,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I was working on a project where I needed to mount 2 buttons and I realized that I only bought 1 breakout board. Since I didn’t want to order another one and wait for it to show up, I designed a small mounting plate. The dimensions are…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
An original extension button for your pants, for the days you ate too much! 🙈 There are two version with different lenght, 32 mm or 40 mm. Printed with supports, 0.15mm quality, with Prusament PLA Gentleman's Grey.
Wydruk około 0,20 €–0,25 € nettoWstępna wycena jednego wariantu
This remix brings a consistent, high-quality texture to your Logitech MX Master 3 / 3S . I modified the model to allow Fuzzy Skin on the external surface of the buttons as well as the shell. This ensures a uniform look and significantly…
Wydruk około 5,22 €–6,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I've created them for a fairly unconventional use… Replace HIFIMAN SUNDARA headphone's leather strap with a knitted pillow:
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Hi, this is my fully functional toggle button with integrated whistle. Perfect for keeping your coat closed and making noise if you need to. It's very loud. If you are more talented than I am, you could even use it to create melodies,…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
Used a template of an existing button and have remodeled it suitable for 3d printing. Looks certainly wonderful when this is printed with copper-filled filament or painted accordingly. Original:…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
Collection of 20 and 10 mm buttons.
Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu
A small power button for the Mac mini M4/M4 Pro that can be attached to the Mac by pushing it into the fan slots near the power button. This is a remix of the Mac mini M4 Power Button that has slanted fins on the button base to make it…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
21 Feb 2024 Added a revised version 0.2.
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
This is a remix of this model What I modified: Top Mod (see images): From Top.3mf Added the carved path of the arm Reduced the lower part to avoid scratching with the Arm Bottom Mod (see image) : From Bottom.3mf Added the carved path of…
Wydruk około 2,76 €–3,38 € nettoWstępna wycena jednego wariantu
A fully printable clasp based on the one worn by Daemon Targaryen (Matt Smith) in the upcoming Game of Thrones prequel House of the Dragon. Included are the left and right clasps with a snap fastener to hold them together and a smaller…
Wydruk około 2,50 €–3,06 € nettoWstępna wycena jednego wariantu
I have several times accidentally hit the Netflix button while watching other things. So now this exists. This was designed for PETG, but PLA or any rigid filament will probably work too. This was NOT designed for flexible filaments as…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Drucken Sie an Ort und Stelle-Fidget-Button Ein kompaktes, stressabbauendes Gerät. Dieses Zappelspielzeug ist perfekt für alle, die gerne klicken, drücken und zappeln. Der Print-in-Place Fidget Button ist so konzipiert, dass er als…
Wydruk około 0,39 €–0,47 € nettoWstępna wycena jednego wariantu
Non functional tactile switch as a button. example gcode is for .4mm nozzle (since that's the one I have) but I think this design would benefit from a smaller nozzle.
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
This jeans button works great. It holds even in a frayed hole, is very stable, and can also be removed again without destruction, for example, for washing. Especially when the original button of a pair of jeans is lost, the hole that…
Wydruk około 0,20 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model is a replica button for the end of the park brake (hand / emergency brake) in a Peugeot 307. I fitted this in my own 307 and it work perfectly. I considered sanding it to remove the layer lines, but printed in copper look…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
Show your love for Lego pieces attaching any of them to these buttons. Change color, size and shape of the buttons you wear in a easy way, whenever you want. Round and square shape, choose your prefered. Disclosure: wear these buttons…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
This script creates a configurable button with a text message. You can define the buttonsize, button roundness, the text, etc. Included are several examples ("Proud maker", “Unbutton me”, “Dark side”, “It wasnt me”, “I wasnt late”, “Big…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
Scale battery for hiding your Hobbywing Fusion start button. You can hide it in plain sight. If you want. I printed the moving part with resinprinter and medium transparent resin. The button led still faintly shows. But if you dont mind…
Wydruk około 0,93 €–1,13 € nettoWstępna wycena jednego wariantu
Nanananananana Nanananananana Bat button for jacket
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
These are simple alphabet buttons. Fun for everybody, definetely a win with kids. In order not to interfere with the letters, These are installed through a sigle hole in the back. Printing Print these with the letters facing down. The…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
Info: exact fit with all Lego Duplo accessories Print instructions: see 3mf file no support attached 2 variants choose your color combinations
Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu
I painted the model for printing in multicolor using Prusaslicer for the MK4S MMU3. I'm uploading the .GCODE to print just one piece, but the .3MF is the painted project. You can add multiples there or other configurations. Add organic…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
This is a replacement power button for the NZXT Phantom 410 case.
Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Resembles a Like Button from many familiar websites. Much like the 5 star rating you should rate this model! Holds 6 SD Cards and 3 MicroSD Cards... and pens. Print instructions The cuff and hand are separate parts on the same 3mf plate,…
Wydruk około 3,82 €–4,66 € nettoWstępna wycena jednego wariantu
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Treat yourself to a chocolate button! While you lift the flower, a chocolate button is placed in the middle of the flower. Enjoy it, and take another one! What colour do you think is next? Watch a short video clip to see, how it works:…
Wydruk około 8,91 €–10,89 € nettoWstępna wycena jednego wariantu
Braun rasierer series 9 power button 9090cc
Wydruk około 0,14 €–0,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed to have better access to my mk3's power switch with it being in an enclosure so i decided to install a power button for the power and one for the lights. Buttons purchased from here…
Wydruk około 3,92 €–4,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tired of having to throw away your jeans just because the button is ripping out of the fabric? No spare clothing on your business trips? Your children too enthusiastic in the playground? Went out of control in an all-you-can-eat…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
This box holds 12x LR44, 10x CR2025, 10x CR2032 The design is made to print without support. The Box closes with a slider and a tacky SNAP! at the end. Please use the “Split” function in the right click menu of the slicer to separate the…
Wydruk około 2,89 €–3,54 € nettoWstępna wycena jednego wariantu
I print it in Pla with 0.2mm layer. activate “detect thin walls” for the little supports. (look at the 2 Slicer Screenshots). If you push the button, you can adjust the tabletholder. Ich habe das in Pla mit einer 0,2mm Layer Höhe…
Wydruk około 5,27 €–6,44 € nettoWstępna wycena jednego wariantu
A replica of the Windows 95 start button. The STL model is 16 cm in the wide dimension and about 6.4 cm in the other. The black parts of the icon are 0.4 mm higher than the colored parts. I printed most of it with gray filament, switched…
Wydruk około 3,29 €–4,02 € nettoWstępna wycena jednego wariantu
Small button for a coat or viking cosplay. Magic symbol from the norse era. Meaning of symbol: “If this sign is carried, one will never lose one’s way in storms or bad weather, even when the way is not known.” -Huld manuscript
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
A simple fun Meeple button to sew for the Carcassonne lovers. The regular size is 25mm x 24.28mm x 2mm, then it is good for pants or jackets, actually even some fleece shirts too and bags/pockets with flaps. I've added a smaller size,…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
I modded knackwurst's model to add a hole to be able to plug in a micro USB cable to charge it while it is in the holder. There is room to bring the cover of the USB port through the hole so you don't have to remove it from the device.…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
The d-pad and button simply snap onto the original button heads and hold without glue. Print recommendations: 0.40mm nozzle 0.15mm quality/layer high
Wydruk około 0,19 €–0,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Use paint on supports for the protruding part of the pushrod. The rest of the model is support free. Organic support works great.
Wydruk około 1,07 €–1,30 € nettoWstępna wycena jednego wariantu
This part fits a Kohler pull-out faucet handle (Forte Kitchen Sink Faucet K-R10433 with various finishes, one UPC is 0650531224743) that is discontinued and replacement parts (K-1346768) are not readily available, or expensive. This…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena jednego wariantu
The model was designed such that the top edge will be aligned with the top of the standard REV Robotics 15mm extrusion and mounted with M3 screws. The G-code includes a pause to change the filament color. The OpenSCAD source file has been…
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
nose button design for modern compound bows printed mine in PETG at 0.1 mm include a brim for adhesion the overhang wasn't a huge problem for me, you might need a cooler nozzle temp to get that perfect
Wydruk około 0,24 €–0,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Replacement buttons for the key of an Peugeot 107.
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
This is a small Celtic knot with a 2mm hole on the back for sewing it onto a knitted hat. Printing I printed it face down, single color, no support, with PLA. The layer height should be a small as your printer can handle for the fine…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
BE PROUD of you Beetle or VW VAN with this button
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Jeans button replacement with M3 countersunk head screw and nut. I needed this button when the one on my Levi's jeans just fell off. Different versions. - Version 3: Insert M3 nut during print. No visible screw afterwards. - Version 2: M3…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Mason's button
Wydruk około 0,13 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Just another nice button. Can be sewn normally, or - if there is no time or no accessories - quickly attached with pressure for an emergency. Maybe not for permanent use, but enough until home, or until the day is over. Use Nylon or ASA…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
SHOW YOUR FORD PRIDE
Wydruk około 0,12 €–0,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
JEEP Lovers. you were not forgotten Here's your button
Wydruk około 0,19 €–0,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Intro I'm a designer and maker and I love to customize my tools and my clothes. I was inspired a lot by Adam Savage's Tested (de)Merit Badges (which are great to customize things) and designed these Maker Buttons to use on your hoodie,…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Show your Toyota Truck Pride with this Shank Button
Wydruk około 0,36 €–0,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Safety cover for M22 Eaton box. I printed from ASA and the strength is great. It is equal to the original.
Wydruk około 4,07 €–4,98 € nettoWstępna wycena jednego wariantu
My plushie needed some eyes. These eyes are just right! Diameter: 35mm Total Thickness: 5mm You could totally use these as regular buttons too if you want!
Wydruk około 0,62 €–0,75 € nettoWstępna wycena jednego wariantu
This bunch button should better conform to the profile of an HDS68 airsoft butt end. Please provide feedback since I don't own an HDS68 & I have no ways of testing it. Thanks for your interest in this model!
Wydruk około 0,50 €–0,62 € nettoWstępna wycena jednego wariantu
Credit: Thanks to Lorenzo (@laurent.polese) from MakerWorld for sharing the original design. Modifications made to the original: Printed using a 0.25 mm nozzle for higher detail Buttons scaled to 92% on X and Y axes Buttons scaled to…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remixed to add holes so that buttons can be pressed intentionally, but are still protected from accidental activation. Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 80+ Supports: No Print…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Our kids love their Dyson toy vacuum. So it gets used quite often and from time to time looses its buttons. Most of the time we find them and put them back in, but lastly one got lost, so I made this replacement which fits very nice and…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
Do you call the mountains home, or do they call for you? This button is an ode to what the landscape means to all of us. It features a moon shining over the mountains and a bear, wolf, and hare encompassing it. Wear it on your garments,…
Wydruk około 0,76 €–0,93 € nettoWstępna wycena jednego wariantu
You simply slide it onto the tip of the whipping cream can and Viola! You press down on the button to let whipping cream come out! This would mainly be used for if you're going to spray a lot of whipped cream in one sitting, to make sure…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
lightswitch cover for TRADFRI IKEA smarthome switches and buttons. Stop your familymembers and friends from turning off your smart lights the wrong way! No tools required!
Wydruk około 2,11 €–2,58 € nettoWstępna wycena jednego wariantu
This model includes replacement buttons that you can glue in your damaged Smart key fob. You can get replacement plastic cases relatively cheap on eBay but then what would we use our 3D printers for ;) It is parametric and can be adjusted…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
HERE is the Anonymous Shank Button..
Wydruk około 0,11 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I bought one of these 2.8inch LCD displays ( https://shop.pimoroni.com/products/pico-display-pack-2-8?variant=42047194005587 ) to use with a Pico W as I wanted a small, but capable bit of screen space to show some stats etc. It just plugs…
Wydruk około 2,19 €–2,67 € nettoWstępna wycena jednego wariantu
The original part (yes, it is called “ front base tube button side ”) on my wife's ST2 was lost because it obviously didn't hold properly from the start and simply fell out somewhere along the road. That's why it didn't make sense for me…
Wydruk około 0,48 €–0,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
When they put the gas in, they didn't ask me where to put the gas control, they did it as it was more convenient for them. The button was attached with double-sided tape, which later came off. I decided to make a pin for that button.…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hole radius 6mm (Otvor o průměru 6mm)
Wydruk około 0,53 €–0,64 € nettoWstępna wycena jednego wariantu
The provided 3MF File is prepared with all my modifications. The Back Part needs Supports for Printing After Printing the Back Part, you need to punch through the 2layer supports for the M8 screw (if you want to use this Fixing Method) I…
Wydruk około 4,04 €–4,94 € nettoWstępna wycena jednego wariantu
Button with the Swiss Cross. Diameter is ~15.2mm. Layer height: 0.15mm Infill: 15% Support: None If you slice it yourself, set a colour change at 3.35mm height STEP and Fusion 360 files provided. If you enjoy or find this model useful…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
A simple collar for the Behringer DCX2496 Power Button. The collar prevents accidental button press and it also acts as a guide for the button. The part is designed to replace the original collar (if broken etc.) and it is meant to be…
Wydruk około 0,32 €–0,40 € nettoWstępna wycena jednego wariantu
I designed and 3D-printed a custom grip for my Nintendo Switch JoyCons using PLA on a Prusa MK4s. This project was driven by a need to address the common issue of existing grips obstructing the top buttons, ensuring full functionality.
Wydruk około 0,88 €–1,08 € nettoWstępna wycena jednego wariantu
I love using my Tiles, but their buttons drive me crazy! Even if you disable the “Find Your Phone” option in the app, pressing the button can still cause the Tile to chirp for about ten seconds. Furthermore, the buttons are incredibly…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Recommended print settings: Material: PLA or PETG Layer Height: 0.1 mm Infill % : 15+ Supports: No Print Orientation: Default as modeled Raft: No Brim: No Add a color change at layer 3 for contrast in the text.
Wydruk około 0,45 €–0,56 € nettoWstępna wycena jednego wariantu
Print Tested IEC 60417-5009, the standby symbol (line partially within a broken circle), indicates a sleep mode or low power state. The switch does not fully disconnect the device from its power supply . This may appear on a toggle switch…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you want to sail the seas with style, you can't do it without the ship's rudder buttons.
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
This is a case I made to house start, pause and stop buttons for my Octoprint Raspberry Pi server. The case prints fine in PLA with no supports needed. A fully parametric Fusion 360 model and a step file are included, so you can modify…
Wydruk około 2,16 €–2,64 € nettoWstępna wycena jednego wariantu
Stampa realizzata in onore alla mia terra SARDEGNA realizzabile in varie misure Print made in honor of my land SARDINIA achievable in various sizes
Wydruk około 0,28 €–0,35 € nettoWstępna wycena jednego wariantu
I designed flat top buttons last year to shorten print time for my broken button for coat. They loos sharp. So I designed rounded shape button with several Japanese traditional designs. One needs support, so I add a slit to the interface…
Wydruk około 0,45 €–0,54 € nettoWstępna wycena jednego wariantu
This is a remix of the power button lever for the Mac Mini M4 from GreaseMokey. The file only includes the IO-knob. Download the rest of the necessary parts from the original creator here:…
Wydruk około 0,05 €–0,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
After buying a Moccamaster KBT I realized sometimes I don't need to brew a full pot and wanted the option to use another carafe, like a large insulated thermos to brew into. The piece fits right in and presses the white button the carafe…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
Dobot MG400 Button Pusher to affix to the arm
Wydruk około 0,75 €–0,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Introduction and Use Case I am replacing some of my wall light switches with Zigbee scene controllers. One of the controllers I use is a “ Tuya ZigBee Smart Home Button Scene Switch Smart Linkage Smart Switch Battery Powered with Smart…
Wydruk około 1,69 €–2,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These are common deburring tools, but cheaply made. The little button is a part which holds and releases the deburring bit itself. It should really be made of metal, but it's made of plastic, so the surface which rides on the bit wears…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Quick temporary replacement for the broken toilet flush button - bullshit
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Popis CZ: Upravená náhradní díl pro otočný ovladač stmívače LED světla. Tiskové parametry: Podpěry : bez podpěr. Filament : PETG, nebo PLA. Výška vrstvy : 0,15 - 0,2 mm. Infill : 100 %. Postprocesing : Není nutný.…
Wydruk około 3,21 €–3,92 € nettoWstępna wycena jednego wariantu
Magnethalterung für einen Blue Button von Shelly für die Magnetplatte in meinem Auto. Der Blue Button wird genutzt um mein Garagentor zu öffnen. Gedruckt mit 0,10mm Schichthöhe und Prusa PTEG. Zusätzlich werden 4 Magnete 10xmm benötigt,…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed a bracket to mount my latching pushbutton switch. Works good.
Wydruk około 1,01 €–1,24 € nettoWstępna wycena jednego wariantu
This is a wallplate for a 1-gang device box (North American standard) that has two 30mm button cutouts. My specific use case was to replace a secondary wired garage door wall control that stopped working with my new Security+ 2.0 garage…
Wydruk około 2,12 €–2,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Y-Rail Adapter modified for usage with Hyperpixel 4" Touchscreen LCD with Raspberry Pi4 for Octoprint and OctoDash for Prusa i3 MK3S+ https://www.prusaprinters.org/cs/prints/70062-hyperpixel-4-touchscreen-lcd-raspberry-pi4-without
Wydruk około 0,32 €–0,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I had trouble getting the main “left mouse button” to click. It seems like there was a lack of clearance on the parts I printed between the main buttons and the wheel mount. This model gives an extra 2mm of space to the two faces closest…
Wydruk około 1,43 €–1,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Purpose: A protective outdoor cover for a S3XY button, e.g. use to open or unlock the charge port. Mounting: Two 4 mm screws, the S3XY button is pressed in to place and can easily be removed with a small screwdriver, or similar tool.
Wydruk około 2,56 €–3,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
fight against racism
Wydruk około 0,84 €–1,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Designed and printed a fix for my girlfriend's Morphy Richards blender ( model 48973 ). Printed the inner parts horizontally with support. Printed the outer parts vertically with support on build plate as well.
Wydruk około 0,14 €–0,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
