Wyniki wyszukiwania: caldigit

Sortowanie

39 modeli

P
PrintablesJasonLang

CalDigit TS4 Bracket

Need to mount your shiny TS4 under your desk or monitor stand? This print will do the trick. Once the bracket is mounted, the TS4 can be easily slipped in and out via the integrated retention clips. Simply attach the cables to the back…

Wydruk około 3,40 €–4,16 € nettoWstępna wycena jednego wariantu

Pobrania
1057
Polubienia
96
Ocena
4,88
P
Printablesthisdrunkdane

CalDigit USB-C HDMI Dock Bracket

This small bracket can be mounted under a monitor shelf to get your dock right front and center without taking up desk space. To get the other side of the bracket, simply mirror the print in your slicer of choice Instructions: Insert dock…

Wydruk około 3,63 €–4,43 € nettoWstępna wycena jednego wariantu

Pobrania
73
Polubienia
5
Ocena
0
P
PrintablesMichael

Caldigit TS3+ under desk mount

We have the Caldigit TS3+ USB docks at work and very small desks. I designed this to move the docking station to the underside of the desk to save space and remove the cluttered appearance of the cables. These and the Dell WD19 version…

Pobrania
399
Polubienia
28
Ocena
5
P
Printablesdmitri

Caldigit TS3+ mount (+ power bar mount) no supports

This is a remix of devin's underdesk mount. I've made the following changes: cut out hole in the floor for better heat dissipation removed overhangs so it prints with no supports added chamfer to the screw holes so it interfaces better…

Pobrania
395
Polubienia
36
Ocena
4,71
P
PrintablesCalomile

CalDigit TS4/TS3 under desk holder

My goal was to design a CalDigit TS4/3 under desk mount that would fit my needs: Multiple mounting options, under desk, desk top, wall mount etc. Tabs that to retain the dock but allow for easy removal should you need to remove the dock…

Pobrania
298
Polubienia
33
Ocena
4,5
P
Printables駄目g

Multiboard Caldigit TS3 holder for underware

This holder mechanically attaches to the multiboard using threaded screws (see https://www.printables.com/model/980088-multiboard-compatible-bolt-for-small-thread ) The caldigit generates significant heat, so there is a clearance between…

Pobrania
223
Polubienia
39
Ocena
5
P
PrintablesChongfun

CalDigit TS3 Plus under-desk mount

Under-desk mount for the CalDigit TS3 Plus Thunderbolt 3 Dock

Pobrania
150
Polubienia
9
Ocena
0
P
PrintablesBrian

CalDigit TS5 Plus Under desk mount

Remixed Under Desk Bracket to hold the CalDigit TS5 Plus. File includes both left and right brackets.

Pobrania
131
Polubienia
10
Ocena
0
P
PrintablesTP

CalDigit TS4 Under Desk Bracket/Mount

I've been exploring solutions to mount my CalDigit TS4 under my desk. However, I had specific challenges with my desk having a false bottom. I had limited horizontal space and couldn't insert and remove the TS4 easily. Taking inspiration…

Pobrania
120
Polubienia
9
Ocena
0
P
PrintablesCelso Santos

Caldigit TS4 Brackets

I had been looking at @JasonLang_99641 TS4 Brackets , but they didn't have enough vertical space for a desk controller + dock (under the controller), so I decided to create a mount to include the controller and offset the TS4 dock to…

Pobrania
106
Polubienia
7
Ocena
0
P
Printablesdubhunter

CalDigit TS4 Wall/Desk Mounting Brackets

I wanted to be able to mount my Caldigit TS4 under my desk, while maintaining as much airflow as possible. These brackets fit snuggly and allow for both wall and desk mounting. They are designed to fit both the fixed gray rubber foot, as…

Pobrania
90
Polubienia
3
Ocena
5
P
Printablessgmeesix

CalDigit TS3 Plus dock desk tidy organiser

I made this model to keep my CalDigit TS3 Plus and a G-Drive SSD tidily on my desk. Prior to this they were leaning on each other and liable to be pulled over etc. Simple print, no supports required, prints in 2 hours, looks great in…

Pobrania
87
Polubienia
13
Ocena
5
P
PrintablesMilan

Caldigit TS3+ Underdesk Power Supply Holder

A clamp to hold your TS3+ power supply under the desk. Screws are needed! Screwholes have a 3mm diameter.

Pobrania
72
Polubienia
4
Ocena
0
P
PrintablesMooseBoys

CalDigit TS4 Wall-Mount Brackets

Mounting brackets for the CalDigit TS4 docking station. Suitable for both horizontal and vertical mounting orientations.

Pobrania
71
Polubienia
6
Ocena
0
P
PrintablesInfrageeks

Skadis mount for Caldigit ThunderBolt 4 Hub

A quick design to hold a Caldigit Element Thunderbolt 4 Hub (https://www.caldigit.com/thunderbolt-4-element-hub/) on a Skadis panel. It uses the Universal Hook (https://www.thingiverse.com/thing:2853261) as the attachment method…

Pobrania
70
Polubienia
8
Ocena
5
P
PrintablesGörkem Kol

Caldigit ts3+ Laptop Holder

I designed a unit that can both hold a laptop and a compartment for TS3+. Design has holes for ventilation. The foot goes to the back part for heavier laptops.(With the help of a lighter it will melt its self down to the place)

Pobrania
62
Polubienia
6
Ocena
5
P
Printablescmsj

Underware mount for CalDigit TS4

This is an Underware mount for the CalDigit TS4, generated using Andy Levesque's Underware generator. I don't really claim any ownership of this, since I just put the dimensions into Andy's code and this is the file it produced. I've…

Pobrania
54
Polubienia
2
Ocena
0
P
PrintablesJens83

CalDigit SOHO dock mount

With this thing you can mount your CalDigit SOHO dock under your table. First attach the main mount with 2 wood screws, then insert the dock from the front. Attach the lid with 4x M3x10mm screws. There are holes and spaces for ventilation…

Pobrania
47
Polubienia
9
Ocena
5
P
Printablesfns720

Audioengine D1 mount for CalDigit TS3 Plus

A minimalist mount which locks the Audioengine D1 DAC on the top of CalDigit TS3 Plus dock.

Pobrania
46
Polubienia
7
Ocena
0
P
PrintablesGizmotoy

Riser for Caldigit TS3 Plus

I really like this dock, but it sits a bit too close to the desk and the cables that come out the back interfere with other stuff I have behind it. This riser fits into the grooves on the bottom of the dock and lifts it up about 15mm.…

Pobrania
45
Polubienia
5
Ocena
0
P
Printableskbedrich

Laptop Stand with Caldigit TS3/TS4 Slot

NOTE: This part has not been printed/tested yet. It might tip… I needed a clean-looking stand for my laptop and a spot to put my Caldigit TS4, so I created this laptop stand. The stand sits at a 20 degree angle, and I can easily adjust it…

Pobrania
36
Polubienia
3
Ocena
0
P
Printablesmint_dulip

CalDigit Element TB4 Mounting brackets

A quick bracket that allows for wall or under desk mounting of the CalDigit Elements TB4 hub. Prints well in PLA or PETG. Plenty string enought given the low weight and stresses on the hub. Print with on the ends with the cavities facing…

Pobrania
28
Polubienia
4
Ocena
4

CalDigit TS4 Cooler

Cool off that way-too-warm CalDigit TS4! Fits 2 40x10 fans! Before - 1 hour of heavy use: 51c measured TS4 enclosure temp After - 1 hour of heavy use: 34c measured TS4 enclosure temp BOM: Branding doesn't matter - this isn't meant to be…

Pobrania
27
Polubienia
3
Ocena
0
P
Printablesyapiodesign

Caldigit TS3 Dual SSD stand

Vertical stand to hold a Caldigit TS3 Plus dock and two external SSD drives

Pobrania
26
Polubienia
0
Ocena
0
P
Printablesstepan.rudenko

CalDigit SOHO mount for Multiboard

I have Multiboard grid mounted under the desk for cable management, so I've decided to attach the usb hub and CalDigit SOHO under the desk as well. Model should be printed aside with tree support (check attached image). I've used PETG for…

Pobrania
26
Polubienia
1
Ocena
0
P
PrintablesSomeZ3D

Caldigit ThunderBolt 4 Hub VESA Mount

Have a laptop that lives on a gas-mount VESA arm laptop mount (WALI universal adjustable laptop mount) that had the bottom 75/100 VESA mount holes available. Used those holes for this mount to hold my Caldigit Thunderbolt 4 hub. Attached…

Pobrania
24
Polubienia
1
Ocena
0
P
PrintablesBanan

Caldigit TS1 Wall / Desk Brackets

Caldigit TS1 Wall / Desk Brackets

Pobrania
23
Polubienia
2
Ocena
0
P
Printablesdoncoop

CalDigit USB C Pro Dock Bracket

Information Brackets for the more than capable but slightly older CalDigit Dock, the USB C Pro model. Attached are two versions, one for the now discontinued Alex add on unit (monitor shelf with drawers) so it can just be clipped…

Pobrania
22
Polubienia
1
Ocena
0
P
PrintablesTim Lauber

Caldigit Element Hub Mount for Slot Profile

A mount for the Caldigit Element Hub to 40mm slot profiles. Step file is included for modification. Additional hardware: M6x30mm screw (4) M6 T-nut for slot profile (4)

Pobrania
19
Polubienia
0
Ocena
0
P
Printableskevinrieger

CalDigit TS4 Docking Station – Under Desk Mount

A perfect-fit under desk mount for the CalDigit TS4 Thunderbolt docking station! Features Front of the dock stays clean. Great for front facing mounts Dock stays locked-in due to two small buttons that lock in the ribbed surface of the…

Pobrania
18
Polubienia
0
Ocena
0
P
PrintablesYoann

Caldigit TS3 Plus under-desk holder (no screws in your table top)

I designed this holder in a pinch. It is not the prettiest, but it is sturdy and fitting my needs. Namely: Does not require drilling any holes in my tabletop Hang on my under-desk cable tray ( model I use ) Hardware While the holder does…

Pobrania
17
Polubienia
0
Ocena
0
P
PrintablesDSD

Dual CalDigit TS3+ Stand

I'll admit this is pretty niche, but I have two CalDigit TS3+ units and they don't stay upright on my cluttered desk. So I made a small stand for them. Easy print, works well. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No…

Pobrania
13
Polubienia
0
Ocena
0
P
PrintablesFoobar54

CalDigit E5 - Under Desk Mount

This is an under desk mount for the CalDigit Elements5 hub. Recommend printing on the chamfered edge with a brim and using supports as shown in the picture.

Pobrania
12
Polubienia
3
Ocena
0
P
PrintablesDeDJ

CalDigit TS4 Table Mount

Table Mount for CalDigit, Category: Office

Pobrania
9
Polubienia
0
Ocena
0
P
Printablesgplawhorn

Caldigit T5 Plus wall bracket

Nothing fancy here. Feel free to spruce it up if you like. 4mm screw holes. Print two for the best results.

Pobrania
9
Polubienia
0
Ocena
0
P
PrintablesPhilip3d

CalDigit TS5 Plus Mount Case

Mount your CalDigit TS5 Plus directly to the Secretlab MAGNUS Desk Riser with this custom-designed PETG enclosure. This case is made to hang or attach securely onto the MAGNUS Desk Riser, keeping your Thunderbolt dock off your desk,…

Pobrania
7
Polubienia
0
Ocena
0
P
Printables

CalDigit USB C Pro Dock Bracket

Information Brackets for the more than capable but slightly older CalDigit Dock, the USB C Pro model. Attached are two versions, one for the now discontinued Alex add on unit (monitor shelf with drawers) so it can just be clipped…

P
Printables

CalDigit SOHO mount for Multiboard

I have Multiboard grid mounted under the desk for cable management, so I've decided to attach the usb hub and CalDigit SOHO under the desk as well. Model should be printed aside with tree support (check attached image). I've used PETG for…

P
Printables

Caldigit ts4 psu mount

Bracket for under-desk mounting of CalDigit TS4 power supply. Designed in Fusion 360.