Liczymy pasujące modele…
Ce support permet de recharger une montre Samsung Watch lorsque l'on a mis un bracelet qui ne s'ouvre pas en 2 parties
Wydruk około 5,22 €–6,38 € nettoWstępna wycena jednego wariantu
Hi! I use a simple IR-Remote to control some of my smart-home devices and automations using home assistant. I built this little IR-Receiver using an ESP32 (CH340) USB-C Board and a KY-022 IR-Receiver. Both very inexpensive components. I…
Wydruk około 1,44 €–1,76 € nettoWstępna wycena jednego wariantu
YJ board CH341A Serial/Memory Programmer Enclosure YJ board CH341A Pro Serial interface / Memory Programmer Case with exposure of ZIF socket and DuPont connectors. The enclosure holds the board snugly. Led Light pipes optional part but…
Razor holders for wall mounting in the bathroom. Glued to the wall using double-sided tape 58x58 mm.
top_* and base_* are original files from the upstream project. I added topholes.* with added holes for LEDs.
Enjoy... Print Settings Rafts: No Supports: No Resolution: 200 Infill: 5 Notes: no support or raft needed Category: Household
This design is based on Jimbo70's Mach3 Razor Travel Case with a few improvements. Changes include: - tighter tolerances (original was 1mm) → snap mechanism works better now - redesigned text (file without text available too) - rounded…
This is a (travel) case designed for the Gillette Mach3 razor. It has included vents allowing the razor to dry. I printed it in matte black PETG to withstand higher temperatures and to provide some impact resistance through flexibility.…
This remix supports Gillette Mach3 razors
I found this razor stand for Gillette Mach3 on Thingiverse, but did not find any on Printables. This upload should make it easier for others to find a suitable stand. I am not the original author. Please see the Thingiverse link for more…
Simple stand for holding a Mach3 razor. Will probably fit other disposable razors. Print it laying on it's back and you won't need supports.
A modified CH341 enclosure top cover with trimmed programmer connector clips in order to avoid stress on the enclosure.
I created this charging stand for my Samsung Watch3. I'm sure it will also work with a Samsung Galaxy Active2. Some double-sided tape is needed to keep the charger in the mount. Print Settings Printer: Hypercube Evolution Resolution: 200…
This is a snap fit box to store a Mach3 Razor. It is ideal for travel since it can hold 2 extra blades. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament: eSun PLA various…
A simple case for the cheap CH340 USB to TTL UART converters that are sold as bare boards. Allows access to the 5V/3.3V selection jumper and reading of all pin labels.
This compact and practical enclosure is designed to fit the CH341A Pro programmer perfectly. The enclosure should fit the CH347 programmer. It protects the device against accidental damage while maintaining full access to all ports and…
Remix from https://www.thingiverse.com/thing:2527773 Added locking tab so that no glue is needed. Tight fit. Increased windows for clearer view of pinout and voltage.
Made this enclosure for quick prototyping for CH340 Chip NodeMCUs. It has kinda snap to fit function but do not rely on that :) Hope it does help. Also attached step file so feel free to modify. Material eSun PLA+ Black Hotend Temp 215…
Traditional nutcrackers are so old-fashioned, now you can use the CR0NCH3R instead! CR0NCH3R is a little dude that chews as aggressively as you can press down on its lever or antenna. Made of many parts, it is easy to print and satisfying…
Holder for Gillette MACH3.
Case and cover to fit ESP-32-CAM-CH340 a.k.a ESP-32-CAM Integrated. Remixed from "Case with kodak thread for ESP32CAM + CH340" to suit "Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2". Category: Electronics
Most of the designs I could find here are way over-designed and bulky, so I designed this super simple cover for my Gillette Mach3 razor. Small lugs inside prevent it from sliding off. I vectorized an orthogonal photo so it fits snugly…
Adapter: https://de.aliexpress.com/item/32971337222.html Category: Electronics
This is a housing for a specific ch340 usb-serial converter. It is made for solfer connect a cable, but jumper wires still fit in. V1 - full closed this one needs to bend or replace the jumper pins (see pictures) V2 - jumper accessible…
A case/cover/shell for NodeMCU (ESP-12E) For v3 CH340
Made for this product: https://s.click.aliexpress.com/e/_c3GTTzlN This custom 3D-printed case is designed specifically for the CH341A USB BIOS Flash Programmer, providing protection while maintaining full access to all essential…
Clamp specifically designed for seamless integration with the SRAM AXS pod controller and the HOPE Tech3 lever. This clamp needs to be printed using carbon filament, ensuring superior torsional stiffness essential for maintaining…
the ESP32CAM is very popular, but I found a version with the CH340 and micro usb port included, so with this version no need to battery shield. this PCB is a little bit longer than the stadard one, so I had to create a new design to match…
This 3D-printable case is designed for a RS232 CH340G USB-to-TTL programmer . It protects the electronics, keeps the wires organized, and makes the device easier to handle during programming or debugging. Perfect for DIY electronics…
Din rail mount for Mach3 usb to 35mm rail.
This is a remix from @AlineBorges_1372677 with an upgraded hook gap
Mount bracket for the EGO Power 320W battery charger (model CH3200) which allows the charger to be mounted on a single stud instead of requiring something at least 4" wide. I tried to make this a quick print while still making it sturdy,…
CNC motherbord BSMCE04-PP box Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament: Plastika Trček PETG any Category: 3D Printing
This is a DIY laser oche for the Autodarts setup by GroMech3D , using a €4 line laser module. It’s not as bright as the Winmau Oche, but it’s definitely enough for a home setup. Assembly & Adjustment: The initial calibration requires a…
This enclosure is purpose-built for the ESP32-Dev CH340-C development board , offering a neat and protective housing for projects powered by WLED . Whether you're controlling addressable LEDs for ambient lighting or festive displays, this…
//italian //English //Italian In rete si trovano molti supporti di ricarica per orologi ma sono quasi tutti verticali. Il design di Kristjan ha invece il pregio di essere orizzontale con tutti i vantaggi che comporta: è facilmente…
It is a keychain of the print.tech3d logo
box for cheep ch340 prc usb2uart adapter CH340G RS232 Upgrade to USB TTL Auto Converter Adapter STC Brush Module Golden or any of the other "golden" adapters: ebay search: CH340G Module Golden no clips are designed to keep it as small as…
Quite simple yet relatively nice looking slide-in case for CH340E USB to TTL converter. Case sized at about 29*24*12 mm, designed with 0.2 mm tolerance in mind. CH340E PCB is 16*18 mm. Recommended to print in transparent or…
If you sensor has a pin/axel on the side then just use this part 2 instead of the original - you'll need the other parts from the original
CH340C ESP01 Two Socket USB Programmer Case with Caps. Resized the case to accommodate a modified lever from ESP32-WROOM-32 (USB-C) Box with Lid model for the reset button. Added thickness and three versions of an optional protective cap…
Adjusted this model in the slicer to be compatible with Mach 3 razors from Gilette. The angle of the original model was a bit too tight which meant that it wouldn't fit anything other than the Venus razors. Mach3 razors would angle too…
This hot end configuration was inspired by a prusa direct drive modification project with the Reach 3D Collaboration community. These parts were modeled from scratch using Fusion 360 and have been tested. As of right now there are only…
15mm, 16mm, 17mm inner diameter was made. You can choose what you want.
Filament : GST 3D. Pla+ White. / Petg Devil Design. Mint. Support : None.
A Lynx 2.1 catch3 and plunger spacer tweaked to constrain K25 and similar springs like SF25 and OOD 140mm tuning springs. Dan wanted to avoid customer support for people who receive/print this type of catch3 and get confused trying to fit…
https://learn.adafruit.com/ch32v203-eink-epaper-calendar-and-clock You will want to add supports for the display cutout.
Rain cover for some TTLock Door Access Controls: - TTLock CF3 - TTLock CH3 - TTLock HF3 - TTLock H3 Printed in PETG with 20% infill.
This is an adapter you can screw on the Ruhhy vacuum bag and clip the Bosh stick vacuum (the handheld part) to it to suck the air out of the bag. I printed with PLA and it works fine, but you need to be extra careful when removing…
A protective micro case for CH341A programmer to prevent bending of the USB-A plug connector. Also works perfectly in a tandem with a SOIC8 adapter soldered to the bottom of the programmer. Featured in this video:
My first design made for resin printing, the 1.5mm diameter pins will be a problem on a FDM printer. This was an experiment in designing for resin printing, learnt a lot. Hence the mssing side pieces and holes to allow drainage. I printed…
Chromalux Neopixel Lamp Cover for Nodemcu V3 CH340 ESP8266. Remake of the Cover to fit the Nodemcu V3 CH340 ESP8266. Fit for m3 en hole to still acces the reset button. Also abit tighter fit then normal. Print Settings Printer: HyperCube…
I didn’t have a key to disassemble my cutting head from my brush scraper, so I modeled one.
SKATCH3Dt coffee2go cup! The perfect opportunity to show off your printing skills to your colleagues at work, or to make a cool and useful present for family & friends! Material : The filament needs to be food safe, chemically tough and…
PTFE lined Lynx Catch3s with TPU and kury 36mm PT versions. Should reduce pump wobble in kury PT Lynxes without breaking quick spring swaps.
needed to replace my VTX with one that had no mounting holes. viola, now I got one. taller version has a deeper cutout for the antennae and an additional mm depth to house the VTX
v3 : Reinforcement housing screen
I tried to print the piece by orienting it differently, but it was causing problems in other places. I also tried to strengthen the most fragile parts, but as they were less flexible they became even more brittle:(. Which is completely…
basic Mach3 VTX holder that fits in place of the stock VTX tray. V2 is a rough draft of the same tray with an extension added to mount an SMA pigtail. Its not pretty, but it worksusing two 6mm M2 screws. Future mixes might try to…
This simple parametric razor holder has the following adjustable parameters: Printed out of Hatchbox Blue Gray PETG at 0.2mm layer height, 15% infill, 3 perimeters. With the default settings it uses 11.6g of filament. The default inside…
Mount for the CH340N USB-C module, ideal for securely fastening it inside a case. The header pins need to be removed, and the connections must be soldered using a wire. Required: 2x M3 min. 5mm long (to screw the top and bottom parts…
Made for this model: https://s.click.aliexpress.com/e/_c438pkd1 (150mil and 200mil-209mil Version Only! Each has it's enclosure) This 3D-printed custom enclosure provides a compact, protective and practical housing while keeping all the…
The Defy DCH 300 series fume hoods/extractor come with little aluminium tabs that are exactly 0.5mm thick, as a result they break off when you look at them funny. I designed little tabs that can be press-fit and printed in place for the…
PLEASE DO NOT MAKE PRINT PROFILES OR REMIXES! This is a mech model that moves.
Basic stand for gillette labs and mach 3 razors. Example is printed in TPU, but this should work with PLA if desired. Included freecad file in case remixes are attempted.
An improved E3Dv6 Mount including fan, and Inductive sensor holder for the Reach 3D printer. It will take a standard 40mm fan, and the the E3D dual fan and bed cooler part (printed in red) from here http://www.thingiverse.com/thing:839620…
This is a housing for the mini game console of wagiminator . It features the inexpensive ch32v003 processor. Someone on OSHWHub.com shrinked the design further to a keychain size. The case is for that board from OSHWHub.com, not the…
Clock in matchbox size with touch control (The CH32V003 is a new chip, if you prefer the Arduino Mini version, see https://www.thingiverse.com/thing:6302260 ) Binary clock, it has 16 pieces WS2812B arranged in a 4x4 matrix display showing…
Case for WeAct CH343P Category: Electronics
CH347 USB Programmer Caddy / Tray This caddy has been designed to protect the CH347 on the workbench Printed on 0.2mm PLA, no need for supports. Small strips of double side tape secure the device. I've included a Step file as well as the…
Hutschienenhalterung für eine Relaisplatine "RelGleich3.0" von https://www.nebenuhrsteuerung.de/Relais3.htm Es werden noch benötigt: 6x Mutter M3 2x Schraube M3x14 4x Schraube M3x10
CH341A USB Programmer Caddy / Tray This caddy has been designed to protect the CH341A on the workbench Printed on 0.2mm PLA, no need for supports. Small strips of double side tape secure the device. Also included is a version with the…
https://learn.adafruit.com/ch32v203-eink-epaper-calendar-and-clock You will want to add supports for the display cutout.
A Lynx 2.1 catch3 and plunger spacer tweaked to constrain K25 and similar springs like SF25 and OOD 140mm tuning springs. Dan wanted to avoid customer support for people who receive/print this type of catch3 and get confused trying to fit…
Rain cover for some TTLock Door Access Controls: - TTLock CF3 - TTLock CH3 - TTLock HF3 - TTLock H3 Printed in PETG with 20% infill.
SKATCH3Dt coffee2go cup! The perfect opportunity to show off your printing skills to your colleagues at work, or to make a cool and useful present for family & friends! Material : The filament needs to be food safe, chemically tough and…
This is a remix from @AlineBorges_1372677 with an upgraded hook gap
Introducing my custom-designed case for the kit, which includes an Arduino Leonardo, USB Host Shield, and CH340N USB-C. Engineered for commercial use, every component fits perfectly, making soldering effortless and ensuring a flawless,…
