61 526 modeli
Note: the coned center section design saves print time (prior design required individual deposition points for 12 tiny dots that often failed, but that are eliminated here) and provides the strength needed to eliminate the vertical links…
Get the latest version here → Charger Cable Organizer final edition -- THE CABLE WINDER II -- This design is an updated and improved version of my popular design “ Charger Cable Organizer ” Thanks to all that posted feedback and makes of…
i remixed this amazing flxible bone dragon/snake. i added a hole for your keys i did it in tinkercad. i did it with the 5 and 10 beacause the other ones are to big for your keys. sorry if you don't understand it i live in belgium. i'm a…
🔥 NEW 2025 DESIGN AVAILABLE: The official, newly improved version of the Dino-Clip is now available for download on Etsy ! It features an updated Dinosaur design, improved strength, and flawless break-away support removal. The new…
Santa Hat now available! Download it here! A base/diorama builder is now available for download for this mini figure model! ___________ IMPORTANT NOTE ON COMMERCIAL USE OF MY MODELS Please note that I am sharing my designs to any one to…
This is a perfect little gift for your loved one and it prints fast - in case you forgot to buy something, hit print… and you're welcome ;) Width: ~4 cm Height: ~3.5 cm Thickness: 1.6 cm Printed with 0.4 nozzle, 0.2 layer height, but you…
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! New thinner version for USB C: printables.com/model/1164721-charger-port-cleaning-tool-usb-c-optimized Keep your devices clean with the Dual-Sided Port…
WARNING: Contains small parts. Not intended for children below 3 years old. Santa Hat now available! Download it here! Printable assembly guide now available for download. A base/diorama builder is available for download for this mini…
TIP! Use lube in the bearing for optimal spinning :) NEW VERSION: https://www.printables.com/model/1345804-keychain-spinner
THIS IS A GCODE FILE. This is not an .stl file or .stp file. This is pre-sliced and ready to print. I have only been able to test this g-code file one a few Ender style 3D printers how ever it should work with most 3D printers. If you…
Flexi Rex with small additional keychain ring. I've printed this one with support below the keychain ring only and made the head lighter by printing with only 10% infill. The rest of the body i've printed with 50% infill for counterweight.
👇 Click the image below to explore my other 3D printable models. ✨ I prefer print with PETG filament. Z mount connection Z mount slepení Glue the two parts of the Z mount. The top edge must be lined up. Alternatively, you can sand it. To…
upd: new print profile (0.15mm) increases the print time but greatly improves reliability. It all started with the paracord keychain I had before I've got my hands on a 3d-printer. For the first several weeks after getting one I've been…
a spine chain cable for Ender 3 V3 SE Print Settings Printer Brand : Creality Printer : Ender 3 V3 SE Supports : No Layer Height : 0.2mm Infill : 10% Filament : PLA
6 cm tall. Easy printed with some small supports.
Just took delivery of my new Steamdeck and decided to design a storage tray to easily store your USB-C charger and MicroSD cards in the cavity on the bottom of the official Steamdeck carrying case that comes with the Steamdeck. The design…
Minimalistic Dock for Apple Watch - version 2. Suitable for both USB-A and USB-C type chargers. Model was tested with genuine Apple chargers: plastic and metal one. Both have similar diameter which is 27.8mm and 27.7 mm, with the depth of…
This cute bear figurine is perfect for a quick print, taking only 25 minutes to complete! Designed with smooth lines and simple shapes, it’s an ideal project for both beginners and seasoned makers. While minimal supports are needed for…
My son turned 16 and loves Mcgybeer's "Articulated Shark." So I made him a keychain version of the model. I scaled the design and added a loop to attach your keys to. I also attached the tail to the last body segment and made it so that…
TIP! Use lube in the bearing for optimal spinning :)
Würth keychain screwdriver Introducing the Würth keychain screwdriver - Your Go-To Tool on the Go! Are you tired of fumbling around for a screwdriver when you need it most? Say goodbye to the hassle of searching for the right tool with…
TIP! Use lube in the bearing for optimal spinning :)
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Tip is thinner, handle with care! Keep your charging ports spotless with the Port Cleaning Tool V2! This optimized version is specifically designed for…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Brim needed Scale it as you like :)
Do you need a quick give-away? Here you find over 1200 names, ready as keychain for printing. Customization To customize your own version (text, etc) use the makerworld online customizer or install OpenSCAD on your own computer and follow…
I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No Check my other Simon's Cat designs https://www.printables.com/model/1239416-simons-cat-you-are-purrfect-keychain…
License: Free for Personal use only For commercial license & exclusive models visit: https://www.patreon.com/FluffyTails (Instant access to 44+ models) Hey everyone! 🦊🍂✨ I’m so excited to share this adorable Flexi Baby Red Panda with you…
Author: Prusa Research (Vlado Turek)
Tried to adjust the Z-mount and the 90 degree extruder so that another chain can be attached in X-direction. Unfortunately I only had the STL files available, so there might be small errors in the mesh. Didn't want to re-model the model…
A useful tool for removing prints from the bed with interchangeable 3D printable blades for when one eventually wears out. You can print the body in either PLA or PETG, however for the blade PLA is highly reccomended. To install the…
As the already existing keychain models just offer a quite small eyelet for the keyring, I remixed the model from DrLex with a quite robust and thick ring at the tail of the dino.…
This cute chameleon is perfect to give some color to your shelves or just as a decorative piece for any room. We suggest to cut this model in three separate parts and then glue them. This allow you to scale the tail to fit perfectly to…
This is a fun model to print because it's quick (49 min), and multi-color makes it look 10 times more awesome! Change your filament color/ material at layers 26 and 30 to achieve this look. Make sure you turn supports ON, or else your…
This is a wall mount designed for LEGO F1 Speed Champions sets. The most popular commercially available mount for these sets (which this model was inspired by) requires the use of screws, which is not always an option for renters or if…
Print Settings: Printer:Any Rafts:No Supports:Yes Filament brand:Any (my Aurapol) Filament color:Any Brown Filament material:PLA Notes: 0.2 mm layer 0.4mm nozzle 3 perimeter 0% infill 1mm retraction 0.4 Z-hop 50 perimeters speed 215C temp…
With this spray can attachment, the chain can be evenly sprayed on all sides. The attachment can be mounted onto standard spray heads and extension tubes. Inside the attachment, the liquid is distributed through channels to 6 nozzles .…
The one in the photo is printed with CF PET-G from Prusa. When printed, just snap in the Airtag and its held snugly. Best printed with a 5mm brim with the flat top facing the print bed. When placed like this it doesn't require supports.
This is a keychain version of McGybeer 's Articulated Lizard V2. His models are great and I have been printing them for years. He is an excellent creator to support. This keychain only uses 4g of filament and is a great option for your…
18/12/2024: Well if you are into Mercedes trucks chances are you are not looking for a french car (!) But anyways you could give a look at my new model the Peugeot 3008 RC chassis and body . 17/02/2024 : I'm releasing a new shock absorber…
I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, organic If you like my work consider Buy me a coffee 😊
From original author description: It takes about 5h to print all parts at 60mm/s, uses only around 50g of filament at 20% infill, and can easily be printed on any 3D printer as the shapes are very simple, with no bridges and maximum 45°…
ALERT: If you use letter ‘g’ then change $fn=32 to $fn=15 This is a custom name tag / key ring charm generator using OpenSCAD with Barbie theme. These tags can be used for bags, phone charms, luggages, key chains, etc. Steps to Create a…
After seeing Neebick's genius addition of a stand into JordanK's Steamdeck USB-C Charger Cradle, I went about reimplementing my slightly larger tweak to that version. Once again, it is about 3mm taller to make it easier to get all of the…
The model includes three versions with color painting - 5T with ColorMix, and 4/8T version with solid colors. ColorMix version The five-tool version (red chameleon in the sample pictures) takes advantage of Prusa ColorMix, creating new…
J1772 Charger Holder. Slim profile - doesn't stick out from the wall too far. Mounting holes are aligned so that you can mount it to a single stud. Loop the extra cord over the top. No supports needed as long as you print it on its side…
Easy to make a cute Cat with Coffee keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
EDIT : I've added a tighter version of the grip. I'd recommend to try first with the normal version first as it is working perfectly for me and most users, but if you find the grip is too loose you can try the tighter version :) Hi !…
I'm making a master collection of all symbols of the car dashboard. I will upload now 50, and I will update overtime. I hope you like it. 1st pack (50): 10/07/2024 2nd pack (50): 12/07/2024 3rd pack (50): 16/07/2024 4th pack (50):…
Optimized for easy print. No additional parts or tools needed. No supports Printer setup: Nozzle diameter 0,4 Layer height 0.30mm 40% infill Perimeters - 2 Solid layers - 2/2
Update 2023-01-13: Addition of Hexa, Triangles, Circles, Plain patterns in addition to the original Voronoi Slight redesign of the overall assembly to limit the friction Other versions Regular charging cable : Same patterns, but for…
Model was found on ameede.net I removed the thin membrane on the first platform using the negative volume box in the Prusa slicer. Otherwise, it is an original model printed on a Prusa MINI with a 0.25 nozzle using Prusament Premium PLA…
Skull Pop Can Holder / Chalice.
PYC3D.ES SOCIAL MEDIA MEMBERSHIPS PYC3D SHOP DONATE UMBREON POKEMON KEYCHAIN Embrace the dark elegance of Pokémon with the 'Umbreon Pokémon Keyring'. This 3D model intricately captures Umbreon, the enigmatic Dark-type Eevee evolution, in…
Hello, this is my pen based on a bistable compliant mechnism. It is very thin (3 to 5 mm) and works with a standard BIC refill ( BIC Cristal). Its center of mass is located (approx.) on the first contact surface (seen from the actuating…
Printed with 0.2mm layer height.
Summary Get more than two dozens multicolor traffic cones in one print - or print them single. They also fit the 1:24 car models I have published. Sizes 1:18 = 30.5mm height 1:24 = 22.8mm height Print Print in 0.2mm layer height. No…
Also tested with other charging ports Inspired by the box openers
Keychain from game Minecraft Sword Axe ... - SketchUp 8 + stl + gcode (Ender 3 v2 Prusa Slicer)
Compliant mechanism clips and clamps for use or replacement in different projects. The clip will hold things like cables, pens, tools and many others you want to have attached. Changelog 2024-12-21 v1.6 fine tuned print settings for…
Easy to make a cute Otter keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
This is a remix of master chief John 117. It was printed with the following configuration: layer heith :0.2 support: Yes. Raft: No Filament: PLA + Filament Brand: GST. Nozzel temp : 205cº Bed temp: 60cº infill: 18% (variable in two steps)…
Easy to make a cute Cat keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Author: Dominik Cisar https://www.prusaprinters.org/social/7/prints The Man. The myth. The legend. Little Josef Prusa Character, designed at the occasion of the Original Prusa MULTI MATERIAL UPGRADE 2.0 release. The model consists of…
Hyundai car brand keychain, with a simple and easy design for a quick impression and low material cost. For daily use, it's better to modify the keychain scale to 70 or 80% to make it more comfortable and less bulky.
Changelog Honeycomb Wall Compliant Mechanism Clip Mount 2023-01-08 v1.2 Horizontal variant added 2022-12-11 v1.1 changed geometry and printing orientation for easy support removal and more reliable fit 2022-12-09 v1.0 initial public…
Because changing nozzles with the supplied multi-tool was too wobbly for me, I developed a simple tool to hold the hotend more stable. As can be seen in the CAD image in cross-section, the tool is designed in such a way that the hotend…
Information: The width of the adaptor where chain pass is around 10 mm. Print settings: Step: 0.3 Shell: 3 Infill: 30% Supports: No Filament: PLA
2026 Update: It looks like since the original launch of the Steam Deck some chargers might come with different length of cable now. My original release charger has 1.5m of cable and it is already a tough fit even when rolled up tightly.…
Object Description: It comes too late for the prusa design contest end of 2021, but here's my version of a bag clip. Advantages: - Stable hinges - Wobble-free hinge design - Easy to close - It clamps reliably even thin bags - Marble…
Blood Type Keychain with NFC Tag (v2) This is a remix of my blood type keychain (see here ). The design has been completely reworked and is now in the shape of a blood drop . The keychain has a size of about 30 mm x 42 mm x 3.6 mm. The…
*/update: I added two more versions. They are both smaller than the original and have one single solid hook. This makes it stronger and it can be printed without supports, and I never used the hooks individually on the original version.…
I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: No If you like my work consider Buy me a coffee 😊
I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, organic - Support from build plate only Seam: Rear/Back If you like my work consider Buy me a coffee 😊 Check ou my other cute keychain
This unique Print-in-Place keychain can hold your phone upright or sideways so you can watch videos on the go. Prints in under 40 minutes with no supports and is ready to use straight off the printer. The snap in design is satisfying and…
YubiKey 5C NFC Case/Keychain (USB C only) I needed something to protect my YubiKey from random bumps and scratches in my pocket. Printing in different colors to differentiate them. It is intended to use case cap as main holder of the key…
The pot is inspired by the structure of old fashioned crystal chandeliers. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…
1:10 RC chassis with adjustable wheelbase, and flexible suspension. How to build it See pictures and fusion 360 assembly drawing. There is color code bolts. Green - 8 mm bolts Yellow - 12 mm bolts Black - M3 nut Filament Prusament PLA -…
Hylian shield keychain from the Legend of Zelda! This one involves multiple filament color changes so I have added a gcode file or you can reference the photo.
Overspray protector as sold by my favourite motorcycle (and bicycle) care product manufacturer, O.K. Wack Chemie, under the name “SauberSepp” or “CleanBob”. Of course, mine is better :) I have added sides to the reservoir to keep the lube…
Update 27-Aug-2024 I've got feedback about Clearance is too big for some printers. So I reuploaded new stl file with tighter tolerance. I also upload Original Fusion 360 File for customization and tolerance adjust. Just need to modify…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
4mme base with 0.8mm lettering sticking out Strong keychain i Put 100% infil for better strength
Easy to make a cute Penguin keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
To All Our Friends & Fans here, we'd like to present a discount code to you all from Printables, get a free 1kg of filament + extra Prusa points by using our code @NightRaid at checkout or by using the links below. @NightRaid or if you…
Hello, this is an early version of a compliant gripper which allows you to hold small objects that you can't reach using only your hands. So far I made four versions: Small rings (Ø20 & Ø14 mm): Short version - its dimensions are approx.…
Solve MagicBand+ charging chaos with this MagicBand+ Charging Tower. Designed to hold up to four (4) MagicBand+ charging cradles and a 4-port USB hub to consolidate everything to a single USB cable that needs to be plugged-in to charge…
UPDATE! V2 now with fancy brick texture! 🎉 This self-loading dice tower can re-roll your dice by simply pressing the handle. Also works as a regular dice tower. Printing I used regular PLA for this print. No supports are needed, except…
Any feedback would be greatly appreciated . Nozzle: 0.4 Layer: 0.1-0.24(Recommended) Scale it as you like :)
A simple fillet radius gauge (1 to 10mm) you can have on you at-all-times. Especially useful for those emergencies when you're making a 3D-model and you need the exact fillet size in seconds. I've printed the model with 0.15 layer height…
Bedside charging station for your phone, Samsung Galaxy Watch 4. I have a Galaxy S9+ but it should work with most phones. This may work with other chargers also. The Watch charging base is 33.5mm wide x 9mm deep.
After creating some more complex models/containers with threaded attachments and supports, finally came up with this simple and less bulky design. The smaller cap goes into the larger portion. The larger part attaches to the top of the…
Perfect nut gauge for your toolbox You can print this in one or two colors.
2-colour Monster claw keychain.
The stand should fit the majority of the 8 wide speed champ cars. It's just wide enough to fit the McLaren Solus GT on the bottom and the Merc F1 is too long for the top to give you an idea for scale. The tabs on the ‘Car stacker plate’…
This is a keychain version of McGybeer 's Articulated Chameleon. His models are great and I have been printing them for years. He is an excellent creator to support. This keychain only uses 3g of filament and is a great option for your…
This practical keychain is an essential accessory for those who love to be always prepared. It transforms into a screwdriver when needed. Inside, you can insert two interchangeable tips: one flat and one cross, each 25 mm long, perfect…
A small welding helmet with a loop for a split ring. Made for the engineers at work. Scales down nicely if you want it a bit smaller to fit in your pocket. No supports required. If you would like your own company initials or simple logo…
A simple small print (takes about 10 minutes) of a small tool used to clean dirt and lint out of the charging port of your phone. If you're like me and keep your phone in your pocket, the charging port is inevitably going to catch some…
