Wyniki wyszukiwania: cheek

The cheeky & rude Ghosts (PAUL & TIM)

CHEEKY & RUDE PUMPKINS ARTICULATED / HALLOWEENDECOR

Cheeky Monkey

Wanted to have some fun sculpting facial expressions. Cheeky defiance was an enjoyable choice. Test print worked well enough without support, but the forearms at least would probably work nicer with support. Also, I would highly recommend…

Tikka T1x Cheek Riser

Tikka T1x Cheek Riser. Mount with 2 sided tape.

Cheeky Goat

Meet the Cheeky Goat 🐐😏 – a mischievous little goat full of personality! With its sly grin, detailed horns, and playful pose, this figure perfectly captures the attitude of a goat that knows it’s up to something. Great as a funny desk…

LongXshot (X-Shot Longshot Pro) Stock Lock & Cheek Rest (LEFTY & Righty)

I created this since there were not a lot, if any, cheek rests for LEFTYs... so i made my own!! My Stock Lock & Cheek Rest is a 2-Piece design. This allows for two things, (i) you can just use the Stock Lock by itself if you don't need…

Lego Compatible (10056.dat) Minifig Headgear Helmet Castle with Cheek and Neck Protection and Armor Panels with Ornaments Pattern (Gimli)

This model is compatible with the lego system.

X-Shot Longshot Cheek Rest

Cheek rest for your Longshot, as the stock cheek weld is terrible. Acts as a stock block too. Print both pieces, open Longshot stock to furthest position, put pieces in, secure with three toy screws- standard Nerf style. Mirror for lefties.

Sandy Cheeks

Sandy Cheeks From Sponge Bob Square Pants

Lego Compatible (48493.dat) Minifig Helmet Castle with Angled Cheek Protection

This model is compatible with the lego system.

Cupid's Cheeky Charmer Valentines day cookie cutter

Cheeky Ghost Statue - Playful Spirit Sculpture - Whimsical Halloween Decor

Buy the full version on Cults3D! Visit my store for paid models! https://cults3d.com/@1xmerch Playful ghost statue featuring a cheeky, humorous expression and whimsical pose. This friendly spirit sculpture offers a lighthearted take on…

AEA HP MAX Cheek riser

Print: Print it standing up. Don't use PLA That's it :) Install: Just slide it on (preferably from the front) When using PETG you can basically not break it while installing

Snowpeak AP900/ Air Venturi Alpha Cheek Riser

This is a printable version of the standard cheek riser to fit the Snowpeak AP900/ Air Venturi Alpha PCP. The factory hardware is used, so just print in your favourite filament and change up the appearance of your PCP! The model is…

Lego Compatible (5681.dat) Minifig Headgear Helmet with 5 Spikes SW Moff Gideon with Visor and Cheek Indents Pattern

This model is compatible with the lego system.

JMac Customs Cheek Riser

I'm in hopes some skilled cad chads can remix and upload new designs

CZ457 synthetic cheek riser

Close your eyes, rest your head comfortably on the stock in a shooting position and open your eyes. What do you see? Are you looking directly into the scope or from below? When properly adjusted the cheek riser you should be looking…

AR Buffer Tube Cheek Rest

AR Buffer Tube Cheek Rest - Tested to fit six and seven position mil-spec, carbine, buffer tubes. Attached using 1/4-20 x 1-1/4" Course Thread, Button Head Screws with ¾" Dia. Threaded Through-Hole Knurled Grip Knobs. Can optionally use a…

Cheekymandos - Missile Action Playset

Uploading my "back catalog" to Prusa Printers! Hope you enjoy this design from 2017: Spring-powered missiles for the win! Designed and built with a series in mind. The Missile Action Playset is perfectly sized for what my nearly…

Among Us Crewmate Keychain (Cheeked Up)

A dummy thicc keychain based on a popular game called among us. Easy to print. I personally print these whenever I switch filaments so as to not waste plastic purging the nozzle. I usually attach them to some cheap keyrings I got off of…

CZ 600 Ergo custom cheek riser

This cheek riser fo CZ 600 Ergo is designed to be used with more standard rubber butt plates used on wooden stocks. Cheek riser is possible to mount with original screw. There are several heights available so you can choose the right one…

Cheeky Baby Gorilla

This little tree-hugger has perfected the “I didn’t do it” grin. Perched in a relaxed sit, our baby gorilla makes a playful desk buddy, a cute planter guardian, or a mischievous shelf mascot. Prints as a single piece with crisp fur…

CZ 600 Ergo 5mm spacer with cheek riser

This 5mm spacer with cheek riser is designed for CZ 600 Ergo rifle. Installation instructions are included in pdf file. You can choose between different cheek riser heights - 10, 15, 20mm. 20mm version is skeletonized which means you can…

Magpul Zhukov stock cheek riser for red dot optics

This is a cheek riser that clips onto the Magpul Zhukov folding stock for AK pattern rifles. It is designed to put your eye in line with a micro red dot optic mounted on an RS Regulate mount. It holds up just fine with light use but I…

Adjustable cheek rest for Crosman stock (13xx, 22xx, ...)

Print Settings Printer brand: Creality Printer: Ender 3 Rafts: Yes Supports: No Resolution: 0,2mm layer hight; 0,4 nozzle Infill: 15% Filament brand: FilamentPM Filament color: black Filament material: PETG Notes: 1x: body 1x: riser 2x:…

CZ457 Pro-Varmint Cheek Riser (Boyd Stock)

Since I had medium scope rings available after grabbing my Pro Varmint I needed a little more height for a cheek weld. So I played around and designed this model. The original model “Cheek22mm” is what I went with for my comfort. In turn…

MDT-like Carbine Buttstock Cheekrest - Simplified

I liked the Juice cheek rest design and changed it up to be a bit smaller and support free. I printed mine with 10 walls of PA-CF but other materials are probably fine. The CF gives it a nice texture. Hardware list from original: 1x 80mm…

Cheeky Thinking Monkey

Meet the Cheeky Thinking Monkey, a playful little figurine caught deep in thought — or maybe just plotting its next prank! With a sly grin, raised eyebrow, and finger resting on its chin, this clever monkey captures a mix of mischief and…

Lego Compatible (6889.dat) Minifig Headgear Helmet with Cheek Protection and Large Pixelated Crest with Frame Pattern

This model is compatible with the lego system.

Lynx blaster "cheek grater" cheek riser

Lynx cheek rest 'Cheek grater' remix of the 10mm cheek rest by EnderSavesTheDay https://www.thingiverse.com/thing:4629645 Print standing up on the 'back' side with a brim should print fine that way Category: Toy & Game Accessories

Lego Compatible (67037.dat) Minifig Helmet with Cheek Guard and Neck Protector

This model is compatible with the lego system.

Airsoft Stock V1 - Ambidextrous cheek rest

Airsoft Buffer Tube Insert Stock Mount (PLA+) -.4 nozzle .2mm quality 100% infill -Insert 3mm brass insert in hole Airsoft Stock V1 (PLA+) -.4 nozzle .2mm quality 25% infill -Insert 3mm brass insert in 2 holes AirSoft Stock Pad V1 (TPU…

SPA Snowpeak (Artemis) P35 Lower cheek piece

Lower cheekpiece for the Snowpeak P35 air-rifle. 35.42mm (1.39") vs 40mm of the original. You can use regular high weaver scope rings instead of ultra high or risers. Printing: Print with top on bed with no supports with a tough material…

Sandy Cheeks

Sandy Cheeks Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the tab…

MDT-like Carbine Buttstock Cheekrest

I needed a height adjustable MDT style cheekrest that would fit an AR buffertube to go along with the printed “MDT-like buttstock for Savage B22 Precision” Aquilo created. I used and remixed/resized the thumbwheel they had made to fit the…

P35 Lower cheek rest

Improved version of my lower cheek rest for the Snowpeak (Artemis) P35 air-rifle. Allows to drop the height to 35.42mm (1.39") vs 40mm of the original so you can use regular high weaver scope rings instead of ultra high rings or risers.…

Basic No Cheek Indent Mando Helmet

At the request of a follower These are two basic mando style helmets (one kind of like a praetorian guard) No cheek indents.... kind of gives them medieval vibes. I've not cut them up .. i'll leave that to you .. no cheek indents means…

Red Ryder adjustable Cheek pad

Adjustable cheek pad for red ryder. youll have to drill holes in the stock. I believe i used m5x30mm bolts with washers to fix it to the stock.

CZ 600 Alpha custom cheek riser

This cheek riser fo CZ 600 Alpha is designed to be used with more standard rubber butt plates used on wooden stocks. Cheek riser is possible to mount with original screw. There are several heights available so you can choose the right one…

MDT oryx oversize cheek riser

Added 30mm of length and 10mm width for a mor confortable fit. Printed in matte PETG-CF (my favorite filament). as is with supports. .015 layer height. walls count:4 top- bottom:6 infill: 35% Uses the original rods and screws from the…

Savage MKll MKii Mark 2 Cheek Rest

Print in the upright position with tree supports(they are a lot easier to remove and leave less scaring) on the build plate only for the back of the riser. I used Cura 5.4 and used a support blocker on the openings for the stock butt pad…

Sir Feathers - the cheeky parrot

This playful parrot figurine brings a dose of charm with its cheeky wink and relaxed pose. With finely detailed feathers, expressive eyes, and a mischievous little smirk, it’s the perfect piece to add character and humor to any…

CZ 457 Varmint MTR Cheek Riser

The goal was to create a screw-free cheek riser, designed for benchrest-style shooting. The press-fit design may not hold up for more tactical oriented shooting. The main insert was printed in ASA and fitted with M3 threaded inserts. A…

Tikka T3X Tac A1 Cheek Riser

Drop-in cheek riser replacement for Tikka Tac A1. Dimensionally very close to the original, with minor design improvements. Elongated cutout for easier bolt removal. Separate files for right-handed (RH) and left-handed (LH) users. Printed…

Lego Compatible (10054.dat) Minifig Helmet Castle Rohan with Cheek Protection & Comb

This model is compatible with the lego system.

Sako TRG cheek piece packer

This packer allows you to raise the cheek piece on the any Sako TRG rifle by 3 mm. The TRG 42 cheek piece can be raise by 2 of these before the cheek piece interferes with the action of the bolt. No idea if the problem occurs in the TRG…

Cheeky Bathroom Signs

Custom model roughly based on a design I saw here: https://www.architecturendesign.net/most-creative-bathroom-signs/

Sandy Rocks (Sandy Cheeks + The Rock)

Just a fun mashup I slung together. Supports are needed for this model. Remixed from these two files: https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson & https://www.thingiverse.com/thing:4507187 If you would…

Carbon 13 Type M Pelvis no cheeks

idk

Scouts Cheek Clapper Handstop Riser

This part is to be used in conjunction with Booligan Shooting Sport's Cheek Clapper kit: https://odysee.com/@BooliganCustomGunworks:f/CP33-Cheek-Clapper-Kit Instead of needing to have a riser to attach to the low pic rail of the original…

"Dragoon" Square cheek Post imperial helmet

Another thing i've cooked up on request from Facebook One has T braces and to be wearable The other doesn't have the braces and the visor is combined for figures I've left the ear spaces open for people to either just leave blank or…

Walther LG400 Economy cheek piece

A simple cheek piece for Walther LG400 economy. The cheek piece is really comfortable. The adapter plate is simple, but it serves its purpose. You will have to print two spacer sleeves. For the 20mm spacer sleeves, you will have to use…

adjustable pad/cheek rest for airsoft G36c (still foldable)

Adjustable upgrade for G36 stock (doesn't affect foldability). I put some foam between the mounts and the stock to reduce the clearance. Use M3 nuts and screws. my designs: flash hider: https://www.thingiverse.com/thing:2364355 short…

Cheeky Beaver Buddy

This charming beaver is full of personality, with its cheeky grin and relaxed sitting pose. Perfect as a cute decorative piece, collectible, or as a fun gift for animal lovers. This beaver captures playful details like its little paws,…

Cheeky Controller

If you've seen the new “Cheeky Controller” but didn't think you could find one in stock. Look no further. Print your very own Deadpool Derriere! .2 Nozzle Recommended* .4 Nozzle Looks a bit like sweater texture Tree Supports*

Carbon 13 Type M Pelvis No Buttcheeks

Carbon 13 pelvis with no buttcheeks

Cheekymandos - TechMech

Maybe fight for freedom with a piloted robot mech suit! See it (and all of the Series 1 Cheekymandos vehicles) in action: https://youtu.be/s86NG01DO_k Missile Launcher files found here:…

RTI Mora Cheek Rest - Final Version

I've released the finished model. Latest model is RTI Mora Cheek Rest V3.3. Fixed a size mistake between the slot and edge of the left side. Added RTI Logo to the face for fanciness. Reduced thickness to 4mm Fixed the reinforcement not…

T6 Stock Cheek Rest

Stuck with the generic T6 stock for now so decided to design a cheek rest for it. Three versions with varying heights: 5mm, 10mm & 15mm. Prototype seen in images is smaller length than STL's, Render is new length. Update 03/03/2022: Added…

Green Cheek Conure Replica Skull

Replica Green Cheek Conure skull model. Sculpted the model in Zbrush and scaled the file in Blender. The files are scaled to the actual size of a green cheek conure skull. Files should fit on most 3D printers. I recommend printing at a…

Dental Cheek Retractor - C-Shaped

I made a cheek retractor. Can be used as the device for the "Watch Ya' Mouth" game. If this size is too big, use your slicer to scale it in the X & Y direction. It's 2mm thick and if too thin, it may fail. Category: Games

RTI Arms priest cheek rest

I used PETG for a softer and warmer feeling, printed standing on back side

Cheekymandos - MiniVamp

Uploading my "back catalog" to Prusa Printers! Hope you enjoy this design from 2017: Inspired by the 1982 GI-Joe VAMP. Print one to add to all your playsets and toys! See it in action: https://www.youtube.com/watch?v=s86NG01DO_k Use the…

S&W M&P 15/22 Cheek Riser

This helps line your eye to the optic or sight when shooting from positions such as those in the Appleseed events. Install by removing your collapsible butt stock and sliding over the “Buffer Tube”. The fit can be snug. Re-install your…

Cheeky Car Phone Holder

This is a mobile phone holder for smart phones for the car, once the phone is placed in the holder the lower part of the phone triggers the the upper arms to grab the phone and hold it in place. The depth of the pegs can be adjusted…

Rifle cheek riser

Cheek riser for Traditions Buckstalker. Needed for high rings and scope. I used black PLA. fits on other stocks and guns. weaved holes with twine, needed to put some foam between at some places to make it slide less.

Adjustable stock/cheek rest (MHP-Vulture)

an easily adjustable stock modification for MHPs Vulture blaster (use the quick change spring pin to adjust it) Posting makes is appreciated and feel free to ask questions :)

Lego Compatible (19114.dat) Minifig Headgear Helmet SW Imperial Agent with Cheek and Neck Protection (Agent Kallus)

This model is compatible with the lego system.

Jam door accessible righty cheek rest

I added a notch so you can open the jam door with the cheek rest attached. I also added a center hole for a m3x16 cap screw so you can remove the cheek rest and replace it if it gets damaged or to make removing the stock block easier. I…

ko II 2 ep 133 teenage engineering technic cheeks

Simple cheeks for the 133. Nice to add a splash of color to this sampler. these are 240mm long. this is very large for a 3d printer. my printer tops out at 180mm so dimensional accuracy is hard to verify. Technic pins are difficult to…

Longshot cheek rest for jam door

This is a modified cheek rest that allows for the jam door to be opened. This design only includes a modified right side cheek rest due to the jam door not being covered on the left cheek rest.

Walther LG400 Cheekpiece spacers

You will also need 2 flathead M5 30mm screws and 2 Μ5 washers Category: Sport & Outdoors

CZ457 Victor Titan Cheek Rest Spacer

5/8 Cheek Rest Spacer Fits Victor Titan Universal Cheek Pieces. Made to specifically fit a CZ 457 Pro Varmint stock.

CZ 600 Alpha 20mm spacer with cheek riser

This 20mm spacer with cheek riser is designed for CZ 600 Alpha rifle. For instalation a new 5x140mm wood screw is necessary. Installation instructions are included in txt file. You can choose between different cheek riser heights - 10,…

Bergera B-14 HMR cheek rest spacer.

In order to clean my precision rifle I need to remove the cheek rest, but then it's slightly annoying to get the height perfect again. I banged this up real quick. Made specifically for the Bergara B-14 HMR, but might fit others if their…

Cheeky Crocodile – The Smiling Buddy

This cheerful crocodile brings a big smile wherever he goes! With his playful wave and happy expression, he’s the perfect little buddy to brighten up your day. Great as a decoration, gift, or to add some fun to your collection

Lego Compatible (11538.dat) Minifig Helmet with Cheek Protectors and Communicator

This model is compatible with the lego system.

Lefty Cheek Piece. FX Impact

This is an easy to print attractive cheek piece for the FX impact. I have a MKII, but I think it fits the other versions as well. The steepest overhangs are 45deg the lack of top, bottom and side surfaces, when printed as shown, make the…

Demoncheeks

Husqvarna Carl Gustav 30-06 cheek riser

My rifle didn't have a cheek riser when I got it, so I made one. It is a little short but that is to make sure you can remove the bolt without removing the riser. I've attached the freecad file so you can change the height, you'll…

CZ 600 Alpha 5mm spacer with cheek riser

This 5mm spacer with cheek riser is designed for CZ 600 Alpha rifle. Installation instructions are included in pdf file. You can choose between different cheek riser heights - 10, 15, 20, 25 and 30mm. 20, 25 and 30mm versions are…

FX Dreamline / Dreampup Cheek Rest +5,5mm

This cheek rest for the FX Dreamline Bullpup increases the height by 5,5mm. Use the little rubber ball and set screw from the original to secure this version.

KRG Bravo Cheek Piece Spacers

If you like my models and feel inclined, I could always use more filament for test prints. https://ko-fi.com/plaid_brad The KRG Bravo rifle chassis has an adjustable cheek piece, but there are no index marks or detents like on other…

Cheeky Ghost Maiden Sculpture – Playful Halloween Spirit – Flirty & Feminine Ghost Statue

Buy the full version on Cults3D! Visit my store for paid models! https://cults3d.com/@1xmerch

Articulated Snowman - Rosy Cheeks

Cheekymandos - ShockHawk

Uploading my "back catalog" to Prusa Printers! Hope you enjoy this design from 2017: Very loose interpretation of the 1984 GI-Joe Sky Hawk. Print one and fly your troops into battle! See it in action:…

Magpull STR cheekweld

A cheekriser that will keep my beard from getting caught in the cracks in the STR when shooting... Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0,16 Infill: 25% Filament: Prusament ASA black…

Cheeky Hyena – Safari Buddy

This cheeky hyena brings playful mischief and safari vibes to your collection! With its sly grin and quirky details, it’s the perfect figure for anyone who loves animals with a bit of attitude. Great as a fun desk companion, gift, or as…

Cheekymandos - Blue Laser Tank (B.L.T.)

Uploading my "back catalog" to Prusa Printers! Hope you enjoy this design from 2018: The Cheekymandos are back in Series 2: Rise of Blue Laser! Download the files to make your very own B.L.T. Full parts list and DIY instructions at…

Dragoon Square Cheek RF

So Mando Mercs wouldn't classify my helmet as post imperial until it had an RF. Well here you go ... an RF version .. Same as before but with an Ear cap. A butterfly nut can be used on inside of helmet to keep pressure for RF movement.…

Cheeky Santa

FX Wildcat MK3 - cheek rest for left handed

FX Wildcat MK3 is not lefty friendly To make a comfortable cheek weld you need one of these WARNING!!! This cheek rest does work with original magazine, you will need to buy smaller one FX MINI Magazine Print Settings Printer: Artillery…

SLAB Cheek Riser - One Piece (easy assembly)

This is a remix of the cheek riser designed by shoelesshistorian. I found the original design somewhat difficult to assemble and slightly unstable. This remix prints the cheek riser as one piece, making it easier to print and assemble…

Sako Quad 5mm cheek riser

A quick & dirty modification from very well modeled and good fit to Sako Quad original synthetic stock https://www.thingiverse.com/thing:4642224 by Krung. Krung's version suits very tall scope mounts. I have 23mm cleareance from rail to…

Airsoft M249 Mk46 Cheekrest Riser

These are snap on cheek rest risers for the A&K M249 Mk46 airsoft LMG. The stock AEG doesn't have a sufficiently high cheek rest for any type of optic or sight, so I came up with 2 designs that snap on. The 15mm version has a much tighter…

Ruger Precision Rimfire Cheekrest.

Custom cheek rest for a Ruger precision rimfire rifle. Requires some supports where the sliding bolt indexes with the part. made for 0.2 layers but works down to 0.1 and up to anything you want. Fitment worked best with 0.2 for me. I…

Keltec KS7 Cheek Riser

Cheek riser/spacer for keltec KS7. Attach with 3M double sided tape.

Cheeky Armadillo

This adorable armadillo comes with a cheeky grin and a playful attitude. Perfect as a desk buddy, display piece, or part of a fantasy creature collection, it captures both cuteness and character in one compact design.

Pineapple of Mischief, Cheeky Nod to the Lifestyle

Bring a splash of tropical fun — and a wink of playful mystery — into your home decor with this vibrant pineapple ornament. Bright, bold, and unmistakably eye-catching, it’s perfect for anyone who enjoys a little humor and a subtle…

Cheek-Pad with clips. For the Duplex Stock/Brace.

I've combined the cheek-rest pad and cheek-rest clips into one STL, so that they can print in one piece. This eliminated the need to glue these parts together.