P
PrintablesB0L1V3R
Chisel holder
The mounts were printed with a layer height of 0.3. in PETG. No supports are required.it is intended for 4 chisels.
- Pobrania
- 892
- Polubienia
- 84
- Ocena
- 4,88
Wyniki wyszukiwania: chisel
320 modeli
P
PrintablesPeter H
WOODWORKING CHISEL SHEATH (PARAMETRIC)
I described this as"scalable" rather than “parametric” - the clear opening dimension of the model is 25.5mm x 4.4mm and it's a very easy calculation to measure the size of your chisel and scale the relevant dimension in PrusaSlicer. Link…
- Pobrania
- 721
- Polubienia
- 228
- Ocena
- 5
P
PrintablesSleepyhead
Chisel Holder
The original was a little to large for my meager cheap chisels, so I have reduced the inner whole to 19mm and also increased the entance gap by a couple of mill to. My rusty chisels I will try to save after finding my kids trying to break…
- Pobrania
- 320
- Polubienia
- 36
- Ocena
- 4,67
P
Printablescrashkg
Angle Setter for Chisels and Plane Blades
This a parametric model of a Angle Setting Block for chisels and plane blades. It is important to have consistent bevels on your blades and this setup block keeps your angles correct every time. Just line up the chisel or plane blade with…
- Pobrania
- 70
- Polubienia
- 14
- Ocena
- 0
P
PrintablesNate
Metal Chisel / Punch Toolbox Holders
Custom holder for metal punch and chisels, stops items moving every time you open and shut tool box draws. Can be re scaled if you want larger/ smaller trays. Set up for single fed printer, two colours, I printed on Prusa mark 3s, for…
- Pobrania
- 6
- Polubienia
- 2
- Ocena
- 0
P
PrintablesGarageTimeWithDavid
Compact Chisel Sharpening Jig
UPDATE: I created a new, simpler chisel sharpening jig: https://www.printables.com/model/520488-better-chisel-sharpening-jig ORIGINAL POST: My chisel set was pretty dull when I bought them, and they needed sharpening after a couple of…
- Pobrania
- 3107
- Polubienia
- 1423
- Ocena
- 5
P
PrintablesJohnMartin
Honing Guide for Chisels and Plane Irons No Bearings and Less Moreness
Low profile chisel and plane iron honing guide. No bearings are required. Assembly Screw both jaws all the way to the center (they should align), then attach the knob. The right side is reverse threaded, and the jaws will only go one way.…
- Pobrania
- 2232
- Polubienia
- 1115
- Ocena
- 4,71
P
PrintablesGarageTimeWithDavid
Better Chisel Sharpening Jig
This is a chisel sharpening jig. It accommodates chisels as small as 0.25 inch and as wide as 2.25 inch. There are 2 holding positions which I'll call the lower vise and the upper vise. Place the chisel into the vise so that its flat side…
- Pobrania
- 1242
- Polubienia
- 241
- Ocena
- 4,75
P
PrintablesEadubs
Eclipse Style Chisel and Plane Iron Sharpening and Honing Guide
This guide is used to get the right chisel and plane projection lengths when using an eclipse style sharpening system. Its pretty similar to the original that it's remixed from except I added a lip to use it on the edge of the bench and I…
- Pobrania
- 1175
- Polubienia
- 239
- Ocena
- 5
P
Printablesjcjames_13009
Wood chisel sharpening guide
I wanted to made my own sharpening guide getting inspiration form the ones available on the market, several designs I found on internet and the one I built some years ago with pieces of wood and furniture rolls that wasn't so accurate I…
- Pobrania
- 663
- Polubienia
- 178
- Ocena
- 5
P
PrintablesMacman1010
Kirschen Chisel Holder for Honeycomb Storage Wall (HSW)
I have created chisel holders in 3 different sizes for Kirschen chisels. These fit the different handle sizes respectively diameters of the metal ring. 17 mm for size 6 and 10 (and every other size with 16.3 mm metal ring) 18.5 mm for…
- Pobrania
- 659
- Polubienia
- 161
- Ocena
- 5
P
Printablesnmumphrey
Chisel Caps
Got sick of my Freshly sharpen chisels getting knicked...so I made these. I have ¾", ½", and 1" caps. Please keep in mind…these are made to fit my chisel sets…might need to change scale for your chisels.
- Pobrania
- 543
- Polubienia
- 65
- Ocena
- 4,75
P
PrintablesLeading Edge
Knife, Scissors, Chisel & Razor Sharpener - Leading Edge System
This is my "Leading Edge" Sharpening System. NOTE - The LATEST (Major upgraded) version of my system will soon be available as a ready-to-assemble kit from https://www.gritomatic.com . I will not be updating this version on Thingiverse…
- Pobrania
- 482
- Polubienia
- 133
- Ocena
- 5
P
PrintablesBoss_Hoss990
Knife Sharpener (+ Scissors and Chisels) - Chonk Edition
After using the “Leading Edge” system for a bit, I identified several improvements and features that I thought would improve ease of use and overall outcome; the platform felt too flimsy for me, and the old style threaded inserts were too…
- Pobrania
- 415
- Polubienia
- 276
- Ocena
- 5
P
PrintablesJohnMartin
Honing Guide for Chisels and Plane Irons
This experiment was to see if I could make a mechanism that securely held chisels and plane irons without too much flex. It works well, but shorter chisels like the Dewalt one in the photos won't do much more than a micro bevel because…
- Pobrania
- 379
- Polubienia
- 128
- Ocena
- 5
P
Printablesenergeticinterpretation44
Better Chisel Sharpening Jig (Metric Remix)
Fully Metric Remix of "Better Chisel Sharpening Jig" by @GarageTimeDavid_3790 Changes: Adjusted hex holes from ¼" (11.1125 mm) to 10 mm to fit M6 bolts Adjusted round holes from 8.4 mm / 6.4 mm to 8.0 mm / 6.0 mm respectively
- Pobrania
- 341
- Polubienia
- 46
- Ocena
- 4,8
P
PrintablesJohnMartin
Chisel Router Plane 1/2-inch (12mm) v2 - Hand Tool Boogaloo
This is the next iteration of a 3d printable chisel router plane. The original was not great ( Chisel Router Plane 1/2-inch (12mm) by JohnMartin | Download free STL model | Printables.com ) but it worked okay. I had to resolve some…
- Pobrania
- 334
- Polubienia
- 146
- Ocena
- 0
P
PrintablesSebastianDruckt
Best sharpening / honing jig for chisels, knifes, planers below 20 bucks
I always failed in correctly sharpening my chisels, so i thought of a method to always sharpen correctly without spending > 100 bucks for veritas tool. I came up with this solution. You need: Diamond Stone / Wetstone I took the SHARPAL…
- Pobrania
- 319
- Polubienia
- 235
- Ocena
- 5
P
Printablesjcjames_13009
Adjustable chisel width upgrade for wood chisel sharpening guide
When I published the 1st version of the Wood chisel sharpening guide I was already thinking about a way to adjust the guide to chisel width without 3D printing and replacing the removable spacers (in orange in the picture below) Design So…
- Pobrania
- 318
- Polubienia
- 82
- Ocena
- 5
P
PrintablesJohnMartin
Chisel Router Plane 1/2-inch (12mm) -Old Version
Newer more betterful version Chisel Router Plane 1/2-inch (12mm) v2 - Hand Tool Boogaloo by JohnMartin | Download free STL model | Printables.com I went through several iterations of this before I came up with a design that worked. This…
- Pobrania
- 289
- Polubienia
- 174
- Ocena
- 0
P
PrintablesConceivablyEngineering
Parametric Chisel Cap
This is a parametric chisel cap/protector. It is a simple but effective design. Theoretically, you should be able to use this with the thingiverse customizer. You simply enter your chisel's dimensions, choose material thickness and cap…
- Pobrania
- 285
- Polubienia
- 42
- Ocena
- 5
P
Printableshmoldenhauer
Ikea Skadis Chisel and File Holders
The Skadis Chisel and File Holders are an addition to the Skadis Universal hook collection by CSD Salzburg . In order to use it, two Universal Hooks need to be printed as well. I added a version for 5mm diameters (e.g. small files), 10mm…
- Pobrania
- 284
- Polubienia
- 33
- Ocena
- 5
P
PrintablesEchteTim
BAHCO chisel holder 6pcs
BAHCO brand chisel set holder for your workshop to easily gain acces to all chisels. Fits the 6 pcs chisel set. Printing settings layer height is not critical, I used 0.20 mm Printed on X1 Carbon at 100% speed (normal) no supports needed…
- Pobrania
- 281
- Polubienia
- 29
- Ocena
- 5
P
PrintablesAndreas Gohr
Better Chisel Sharpening Jig (Metric, Adjusted)
This is a remix of the metric remix by @energeticinterpretation44 of the original model by @GarageTimeDavid_3790 All I did here is to enlarge the M6 holes slightly so that M6 bolts have proper clearance. All kudos to the original makers.
- Pobrania
- 261
- Polubienia
- 25
- Ocena
- 5
P
PrintablesBarras 3D
Sorby Proedge drill guides and chisels
Print as per the 3mf file Text upwards and you should not need any supports Take them off the print bed and remove any burrs Then get a tealight candle and remove it from the tin and rub it over the bottom of the guide to make it slide…
- Pobrania
- 251
- Polubienia
- 27
- Ocena
- 5
P
PrintablesAsa2361
Protective Chisel Caps (Assorted Sizes)
I needed a large number of chisel caps for an assortment of chisels with varying thickness of steel. Designed these after not finding what I was looking for in existing models. Prints quick and does not require supports. The compliant…
- Pobrania
- 244
- Polubienia
- 96
- Ocena
- 5
P
PrintablesDonKeulito
Chisel Sharpener Remix for 608 Ball Bearing + 50/25/20/10mm clamps / Winkelschärfer/ Messerschärfer
Original model worked great, but I don't have 606ZZ ball bearings and needed metrical clamps. So here is a remix working with two 608 bearings (print the Roll.stl twice and glue them together). Additionally I made some versions of the…
- Pobrania
- 243
- Polubienia
- 35
- Ocena
- 0
P
PrintablesFlash72
The Ultimate Chisel Holder
The ultimate chisel holder can be used to hang all your chisels so they are always at hand when you need them. Available in five different sizes for all your chisel needs (five was the biggest I could print on my Prusa i3 MK3S+). The…
- Pobrania
- 237
- Polubienia
- 32
- Ocena
- 5
P
PrintablesHWA
Magnetic holder for Expo Eraser, chisel tip markers and fine tip markers
Uploaded files do not include the logo shown in the photos--feel free to add your own! Print with the back surface down and insert a pause to insert magnets. I used these magnets.
- Pobrania
- 236
- Polubienia
- 51
- Ocena
- 4
P
PrintablesStarstreak Designs
Winged Chisel Plow - 26 Shank 30ft - 1:16th Scale
***Updated March 2026*** Winged Chisel Plow - 26 Shank 30ft - 1:16th Scale Uses M2 Screw. There are holes that need to be drilled out. These spots are indicated with indents. Remember when loading into your slicer to select the option to…
- Pobrania
- 235
- Polubienia
- 21
- Ocena
- 0
P
PrintablesSean Riley
Individual Chisel Holder HSW
I needed something to hold my Presch Chisels on my newly created Honeycomb Storage Wall . The hole/holder part is tapered like the neck and the chisels sit really comfortably. You can see the spacing I used in one of the pictures and even…
- Pobrania
- 230
- Polubienia
- 24
- Ocena
- 5
P
Printablesradicalreel
Chisel holder Workzone ALDI
https://paypal.me/radicalreel The reinforced version is not tested... but should work too. You have to print it on the reinforced side though.
- Pobrania
- 215
- Polubienia
- 26
- Ocena
- 5
P
PrintablesFrantišek Celler
Chisel protection
It is good to push the protection on the chisel for support, not by hand. PLA Nozzle - 0.4 Layer - 0.3 Brim
- Pobrania
- 207
- Polubienia
- 31
- Ocena
- 4
P
Printablesandrewwillis
Pegboard holder for Narex chisels
This is a pegboard holder for the standard Narex chisel set .
- Pobrania
- 206
- Polubienia
- 13
- Ocena
- 5
P
PrintablesStarstreak Designs
Chisel Plow - 14 Shank - Style 1 - 1:16th Scale
Chisel Plow - 14 Shank - Style 1 - 1:16th Scale Uses M2 Screws Recommended to resin print shanks and hydraulic cylinder Hydraulic cylinder uses a 3mm x 21mm rivet 1.75mm TPU used for hydraulic hoses
- Pobrania
- 201
- Polubienia
- 22
- Ocena
- 0
P
PrintablesMeganoodle
3d print chisel
Remove stubborn 3d prints with the chisel, can be used with the pencil mallet in my profile. Sometimes even when you wait for the bed to cool , some prints still dont seem to want to let go, so I made this and the trusty pencil mallet, to…
- Pobrania
- 200
- Polubienia
- 16
- Ocena
- 5
P
PrintablesPavel
IKEA SKADIS chisel holder / držák sady dlát
Chisel set holder (or any other tool that fits) Print with 2-3 perimeters, 15% infill,0.4-0.6mm nozzle, 0.2-0.3mm layer, any material will do. No supports needed, print as shown on picture. 2 hooks needed for attachment to the board,…
- Pobrania
- 200
- Polubienia
- 19
- Ocena
- 5
P
Printablestham
Gridfinity Chisel Set Holder
Gridfinity Chisel Set Holder
- Pobrania
- 199
- Polubienia
- 26
- Ocena
- 5
P
PrintablesChris_300m
Holder for Narex chisels (Honeycomb storage wall)
This is a holder for the standard Narex chisel set ( 8630-10 + 8631-10)
- Pobrania
- 193
- Polubienia
- 41
- Ocena
- 5
P
Printableskatthulu
Parametric Chisel Cover
I needed a cover to protect my chisels and I didn't see the sized I wanted. These can be adjusted in Fusion 360 under modify > change parameters. They can be customized to length, height, and chisel width. I created a version for both…
- Pobrania
- 176
- Polubienia
- 31
- Ocena
- 0
P
PrintablesZekko
Planer blade clamp for compact chisel sharpening jig
Made using the blank clamp template STEP file from the original model. It fits 42mm planer blades. The slot is 1.4mm deep, so it should fit blades of that thickness or thicker. Since I only had 608 bearings instead of the 606 bearing…
- Pobrania
- 176
- Polubienia
- 45
- Ocena
- 0
P
PrintablesDrAl
Tormek Skewed Chisel Sharpening Jig
Note that this is for skewed chisels (as used by woodworkers for cleaning out dovetail sockets etc), not skew chisels (as used by woodturners). Skewed chisels ( like these ones ) have a single bevel at a steep angle and make it much…
- Pobrania
- 172
- Polubienia
- 45
- Ocena
- 0
P
PrintablesJon
Chisel Guard with Built in Spring Retention
Tired of cutting yourself on your chisel when you dig for something in your toolbag? Or sick of finding out that the chisel you just sharpened has been dinged by another tool in the drawer? Fear no more, these guards are easy to print,…
- Pobrania
- 169
- Polubienia
- 34
- Ocena
- 5
P
PrintablesLuke Rantanen
Chisel Honing guide
The goal of the project was to make a fully print-in-place tool so no hardware is required but clamping the chisel was never sturdy enough. Not sure one the exact size of the screws used, when the outer diameter of the threads was…
- Pobrania
- 160
- Polubienia
- 31
- Ocena
- 0
P
PrintablesH3dSprint
Adjustable chamfer tool for chisel
The chamfer tool is printed with PETG and do not need supports. To assemble the chamfer tool, use cylinder screws M3x15 (2x) and hexagon nuts M3 (2x). Adjust the tool on your chisel to get the required size of the chamfer.
- Pobrania
- 156
- Polubienia
- 60
- Ocena
- 5
P
Printablesharbormaster
Chisel / Block Plane Blade Honing and Sharpening Guide
Since it can be tricky to accurately hold a block plane’s blade or a chisel correctly for sharpening, this honing guide is designed to help. A chisel should start with one bevel, which is formed on the blade, usually by grinding it at a…
- Pobrania
- 156
- Polubienia
- 27
- Ocena
- 5
P
PrintablesMauri_F
HW 8un chisel knife holder
Holder for 8 chisel carving knifes from aliexpress. stl ready to print orientation.
- Pobrania
- 151
- Polubienia
- 42
- Ocena
- 5
P
Printableswoelpi
Chisel rack for Skadis
This is a chisel rack that is designed around the Chisels from Dictum. It might work also with other chisels that have a similar tapered neck. The is also a version for a non tapered neck (in this case the file). I included the fusion…
- Pobrania
- 150
- Polubienia
- 18
- Ocena
- 5
P
PrintablesGieljan
Chisel and punch holder
Holder for various chisels and punches
- Pobrania
- 148
- Polubienia
- 17
- Ocena
- 5
P
PrintablesSleepyhead
6 chisel Holder
Remix on My previous changes to hold one more chisel
- Pobrania
- 136
- Polubienia
- 13
- Ocena
- 5
P
PrintablesGxrkensalat
TPU Chisel Protection
TPU Protection for wooden chisel Print Settings Printer Brand: Creality Printer: Ender-3 S1 Pro Rafts: No Supports: No Resolution: 0.2 mm Infill: 100 % Filament: Polymaker Polyflex TPU 95 A Black Category: Hand Tools
- Pobrania
- 131
- Polubienia
- 27
- Ocena
- 0
P
PrintablesMSG56
Chisel Holder
This chisel holder is for the Wood River six piece set that I purchased from Woodcraft. I wanted it to provide easy access to the chisels. It includes a blade safety box at the tip of each unit. It also has the size of each highly visible…
- Pobrania
- 130
- Polubienia
- 26
- Ocena
- 0
P
PrintablesPending Progress
Chisel Holder - Jorgensen
This is an updated version of the chisel holder I made for Jorgensen branded chisels. The interface is a bit tighter, it uses less plastic, but more importantly - it's much nicer to use. The older version would catch when you try to put…
- Pobrania
- 126
- Polubienia
- 17
- Ocena
- 4
P
PrintablesAaron Kelley
Stanley 3-Piece Wood Chisel Set 1/4" Inch Pegboard Wall Mount
This is a pegboard wall mount for a 3-piece Stanley Wood Chisel set . The mount has holes used with rivets for standard 1/4" holes 1" spaced pegboard, or it can be mounted using screws. The rivets use a small piece of standard 1.75…
- Pobrania
- 126
- Polubienia
- 18
- Ocena
- 0
P
PrintablesAtom's Lab
Chisel Holder (KSEIBI)
A wall mountable chisel holder. Use two screws to secure it to a wall or object. Two versions are available, one with markings indicating 1", ¾", ½" and ¼" chisels; the other has no markings. Designed specifically for KSEIBI chisels, but…
- Pobrania
- 124
- Polubienia
- 11
- Ocena
- 5
P
Printablescurioustech
Alternate Size Chisel Channel for Router Plane
agmcmll created this amazing router plane: Ajustable Router Plane by agmcmll . It's designed to easily accommodate different chisel sizes--so I'm sharing the channels I had to create for my own tools. I have a Narex ¼" and an ancient…
- Pobrania
- 122
- Polubienia
- 26
- Ocena
- 5
P
PrintablesTaylorsMake
Stanley Chisel Set Holder
A neat holder that keeps all your stanley chisels together in order in your tool drawer or on the work bench. Can be super glued down or stuck down with double sided tape. Simple to print with no supports at 0.30 mm layer height and 25%…
- Pobrania
- 120
- Polubienia
- 23
- Ocena
- 5
P
PrintablesStarstreak Designs
Chisel Plow - 10 Shank - 1:16th Scale
Chisel Plow - 10 Shank - 1:16th Scale Uses M2 Screws Recommended to resin print shanks and hydraulic cylinder Hydraulic cylinder uses a 3mm x 21mm rivet 1.75mm TPU used for hydraulic hoses
- Pobrania
- 118
- Polubienia
- 15
- Ocena
- 0
P
Printableskjs
Honing guide. Chisel and planer blade sharpening jig
As I never got the results I wanted with the usual Chinese or the other homemade sharpening jigs I was searching for a better solution and low and behold, I found it . Unfortunately the price was rather steep (but justified) and I thought…
- Pobrania
- 116
- Polubienia
- 21
- Ocena
- 0
P
Printablesblackjackbender
Chisel & Punch Holder - Wall Mounted
Basic wall mounted chisel holder. This was design around the Harbor Freight 12 piece chisel and punch set. More of a utilitarian design without worry too much about filament usage. If I remember correctly one of the lowest tier left hole…
- Pobrania
- 116
- Polubienia
- 12
- Ocena
- 0
P
PrintablestheLuchs
chisel sharpening tool for all angles
This is a tool, that helps you sharpen a chisle with a very consistant angle. The angle can be chosen, by how far forward you put the chisle in the tool. All print files can be printed with PLA, but I advise you to print the “wheels” with…
- Pobrania
- 116
- Polubienia
- 27
- Ocena
- 0
P
PrintablesKx
Sharpening Jig for Chisels and plane irons
Jig for sharpening of chisels, plane irons and similar. Print instructions: Material: PETG (PA, PC might be a good fit too) Layer height: 0.2 (0.15 should work fine too) Baseplate: Infill: 15% - 20% Honeycomb Perimeter: 3 Top: Infill: 70%…
- Pobrania
- 115
- Polubienia
- 31
- Ocena
- 0
P
PrintablesPending Progress
Irwin Chisels Holder
I designed this as a wall mounting bracket to hold a set of 4 Irwin brand chisels. I have it set up on a French Cleat wall but it can be mounted directly to a wall or onto a tool cabinet or table. This is one of many shop tool holders I…
- Pobrania
- 115
- Polubienia
- 30
- Ocena
- 5
P
PrintablesDarrens Workshop
Chisel Racks for Narex and Marples chisels
One rack pair holds a set of three Marples chisels, the second rack pair holds a set of four Narex chisels. See the video here: https://youtu.be/ztdbiVzUNpE
- Pobrania
- 114
- Polubienia
- 19
- Ocena
- 0
P
PrintablesStarstreak Designs
Chisel Plow - 12 Shank - 1:16th Scale
Chisel Plow - 12 Shank - 1:16th Scale Uses M2 Screws Recommended to resin print shanks and hydraulic cylinder Hydraulic cylinder uses a 3mm x 21mm rivet 1.75mm TPU used for hydraulic hoses
- Pobrania
- 112
- Polubienia
- 16
- Ocena
- 0
P
Printablesinfinityloop
Pegboard Chisel Holder (With Sy's Peglock)
Holds 5 chisels using Sy's peglock mounting system. Fitted for Narex Richters and mortising chisels but should fit other chisels as well V2 Is thicker since V1 seems to be bending after long term use
- Pobrania
- 112
- Polubienia
- 9
- Ocena
- 0
P
PrintablesNickG-S
Stanley Chisel Holder for Sy's Peglock System
Print with supports for the holder overhang.
- Pobrania
- 108
- Polubienia
- 12
- Ocena
- 5
P
Printablesartsef
Chisel/ File Handle - Bulb-Style End
Fillowing on from my original File Handle and the Hex Key long axis mount, here is a remix between the two, i.e. a similar profile to the bulb shape at the back of the hex key handle ( https://www.thingiverse.com/thing:3605461 ), applied…
- Pobrania
- 106
- Polubienia
- 17
- Ocena
- 3,5
P
PrintablesWIESEMANN 1893
Chisel Set 4pcs holder 064 I for screws or peg board
Tool holder for 4 pcs chisel set. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 206mm W - 60mm H - 53mm We design all…
- Pobrania
- 105
- Polubienia
- 11
- Ocena
- 0
P
PrintablesHabber
Skadis Mitsutomo Chisel Set Holder - IKEA Skadis Compatible Universal Hook
Maximize your workspace organization with this custom-designed chisel holder, perfectly tailored to fit the IKEA Skadis pegboard system. This 3D-printable model offers a snug and secure fit for your Mitsutomo chisels, ensuring that your…
- Pobrania
- 105
- Polubienia
- 10
- Ocena
- 0
P
Printablesyandre
Gridfinity holder for Stanley chisels
A gridfinity holder for 3 Stanley chisels (½"/13mm, ¾"/19mm and 1"/25mm). Fits in a 6x2 gridfinity slot and slim enough for a tool chest.
- Pobrania
- 103
- Polubienia
- 9
- Ocena
- 0
P
Printablesjiggersplat
Chisel Tip Sharpie Holder
Holds 16 Chisel Tip Sharpies Print instructions Category: Art Tools Summary Holds 16 Chisel Tip Sharpies
- Pobrania
- 103
- Polubienia
- 14
- Ocena
- 5
P
PrintablesCary
Narex chisel protective caps
Here are 13 different size chisel caps to protect the sharp end from damage. I printed mine in TPU. They may fit other chisels, but the taper and thickness may be different. You can scale them in in a slicer program to get different fits.…
- Pobrania
- 101
- Polubienia
- 18
- Ocena
- 5
P
PrintablesJohnRbk
Lie Nielsen Bevel Edge Chisel Guards
Chisel guards for the following chisel widths: 1" .75" .5" .25" 1/8"
- Pobrania
- 101
- Polubienia
- 16
- Ocena
- 5
P
PrintablesLU_technic
WOOD CHISELS HOLDER STANLEY BAILEY
Wood chisels holder for Stanley Bailey chisels
- Pobrania
- 99
- Polubienia
- 12
- Ocena
- 0
P
PrintablesErl
Chisel sharpening jig
Simple jig. Use M3 screws on top, and an M8 screw and 608Z (or similar) bearings.
- Pobrania
- 98
- Polubienia
- 20
- Ocena
- 0
P
Printablespoprhythm
Irwin Chisel Set - Wall Control mount
This uses the DDD Printable Wall Control System ( github ) to mount the chisels and mallet. Use the Angle or L-Brackets for the sides - I used 2x1 L Bracket Flat Left and Right for the chisels and 2x2 Angle Bracket Flat Left and Right .…
- Pobrania
- 94
- Polubienia
- 15
- Ocena
- 5
P
Printablesfluxwood
Pfeil Chisel Snap Case
Pfeil chisel case Chisels snap into place Case is designed to fit into IKEA KLÄMMEMACKA desk organizer IkeaCase.stl has the cutouts/slots to fit with the wooden box. PfeilCase.stl does not and is just a tray. Video of it here:…
- Pobrania
- 93
- Polubienia
- 27
- Ocena
- 5
P
Printablesbasti315
Wood Chisel Sharpening Guide - Ball Bearing Upgrade
Upgraded version of jcjames_13009 sharpening jig to use two 608 ball bearings for a smoother experience. Use the roll and main body with the rest of the original parts. Press the bearings into the roll and mount with a sufficiently long…
- Pobrania
- 92
- Polubienia
- 11
- Ocena
- 0
P
Printablesdelooper
Parametric chisel protector
This is a parametric chisel protector. So you can customize to fit most chisels. I find I lose mine once and a while, and can't find replacements anywhere. Similarities to: https://www.thingiverse.com/thing:389283 When printing, you will…
- Pobrania
- 85
- Polubienia
- 9
- Ocena
- 5
P
PrintablesAJWhaleStorm
Chisel Holder
IMPORTANT: I made the part with silly units, so it looks super small. Scale it by 2540% and it should be the correct size. (Inch to mm conversion, silly me) Holds six chisels, up to 1 inch (25 mm) blade size. Has pegs on the back meant to…
- Pobrania
- 82
- Polubienia
- 6
- Ocena
- 5
P
Printablesray of sunshine
Narex Chisel Handles
I saw these unhandled chisels on a YouTube channel that I follow (StumpyNubs): https://taytools.com/collections/brands-narex-chisels/products/narex-6-piece-unhandled-bevel-edge-set I picked up a set as a fun multi-media project. The…
- Pobrania
- 82
- Polubienia
- 10
- Ocena
- 0
P
PrintablesCinema3D
Gridfinity 1x1 Chisel Tip Sharpie Holder x2
Printed with 0.4mm nozzle with 0.20mm layer height . Infill @ 15% with grid pattern . Standard Orange Overture PLA No supports needed No magnet hole cutouts
- Pobrania
- 82
- Polubienia
- 6
- Ocena
- 5
P
Printablesbs85
Harbor Freight Windsor Chisel Tray Organizer
10% infill, no supports. Fits Harbor freight 6 piece chisel set.
- Pobrania
- 81
- Polubienia
- 15
- Ocena
- 0
P
PrintablesJorg
Chisel Sharpener
I have seen many styles of sharpeners in videos and I decided I needed one. You will need 2 skateboard bearings, (8x22x7), 2 M6x20 screws, and 2 M6x15 screws. I use nylon socket-head screws. Printed screws would likely split on the layer…
- Pobrania
- 81
- Polubienia
- 30
- Ocena
- 0
P
PrintablesGunplaMark
Gridfinity Holder for Scribing Chisels
A 1x1 gridfinity block that holds 4 scribing chisels, of the BMC/SAB style with their standard plastic handles.
- Pobrania
- 81
- Polubienia
- 10
- Ocena
- 0
P
PrintablesTaptic Digital
Minecraft Chiseled Sandstone
Two easily printable Chiseled Sandstone blocks! These are sized at 200mm³ to be easily scaled to your liking. 10% scale will make a “normal” 20x20x20 block much like a little calibration cube. Recommend using Fuzzy Skin and tweak it to…
- Pobrania
- 81
- Polubienia
- 16
- Ocena
- 5
P
PrintablesA Printed World
Wall control Pegboard Chisel Holder
Simple 3 Wood Chisel Organizer for use in a Wall Control pegboard.
- Pobrania
- 80
- Polubienia
- 16
- Ocena
- 1
P
PrintablesSupernan17
Chisel holder
A chisel wallmount. Contains spots for 3 straight and 4 rounded chisels.
- Pobrania
- 78
- Polubienia
- 9
- Ocena
- 0
P
PrintablesPointNemo
Bench Grinder Chisel Holder
Printing parameters: Material: PLA Resolution: 0.2 mm Perimeters: 3 Infill: 50% Brim and organic supports for Chisel Holder.stl only Tips: Roughen the contact surfaces to the chisel with 120 grit sandpaper Related models: Bench Grinder…
- Pobrania
- 78
- Polubienia
- 25
- Ocena
- 5
P
PrintablesBLOK ATELIER
wood chisel protection cap / capuchon de protection pour ciseaux à bois
Les tranchants des ciseaux à bois sont fragiles et risquent de se détériorer facilement s'ils sont en contact avec d'autres outils lors du stockage ou du transport. Si le tranchant est endommagé, il faudra du temps pour re-affûter la lame…
- Pobrania
- 77
- Polubienia
- 8
- Ocena
- 0
P
Printablessprior
Wall holder for Narex Richter chisels set of 4
I designed this wall holder for my Narex Richter chisels by measuring and modeling the chisels themselves and then subtracting them from a holder body. They model the taper and don't rest on the leather they sit entirely on the metal with…
- Pobrania
- 76
- Polubienia
- 12
- Ocena
- 0
P
Printablessandigity
Stanley Chisel French Cleat
This is a french cleat accessory designed for 1/2in, 3/4in, and 1in Stanley chisels. Printed in PLA laying on its top.
- Pobrania
- 72
- Polubienia
- 12
- Ocena
- 5
P
PrintablesRobertCowanDIY
Peggit - Narex Richter Chisel Holder
Introduction The Peggit system is a simple way to attach holders and organizers to your pegboard using simple automotive rivets. The clip easily attaches to standard pegboard with 1" spacing using 15mm x 12mm x 6mm automotive push rivets.…
- Pobrania
- 71
- Polubienia
- 16
- Ocena
- 0
P
PrintablesIvar van Hartingsveldt
Narex basic 4 chisel set holder
Remix of the existing Narex chisel mount, but for mounting to the wall instead of a peg board.
- Pobrania
- 67
- Polubienia
- 7
- Ocena
- 5
P
PrintablesDampfy
Ikea Skadis SDS Plus Drill / Chisel Mount
sorry but you have to use supports, just juse organic supports. The Toleranzes are perfekt for printing on an XL whit .6 Nozzle.
- Pobrania
- 66
- Polubienia
- 9
- Ocena
- 5
P
PrintablesDavid Österberg
Skadis Chisel holder (max 40mm)
Chisel holder for the IKEA Skådis peg-board system. This holder support up to 40 mm chisels. And will hold the chisel center line 20 mm from the board. Printed with my Mk3S+, the hooks fit snug with the board (press fit). Unlikely to fall…
- Pobrania
- 64
- Polubienia
- 6
- Ocena
- 5
P
Printablespkn
Halter / holder für / for Stechbeitel / chisel BAHCO 424P-S6
Halter / holder für / for Stechbeitel / chisel BAHCO 424P-S6 Ein Halter für das 6-teilige Stechbeitel-Set von Bahco. Die Stechbeitel stecken leicht schräg im Halter und können so leicht entnommen werden. Die Monatge des Halters erfolgt…
- Pobrania
- 64
- Polubienia
- 4
- Ocena
- 0