32 modeli
My device is also physically sold at the FI7 shop Liège www.fissette.com A Simple Neutrik XLR / TRS Jack 6.3 / RCA solder Support For those who, like me, sometimes have to solder dozens of XLRs a day... This bracket will make your life…
RCA connector dust cover. Stays on great but comes of easy with the little groove in the top. I printed 32 now for my home cinema set. :) Just a 10min print @ 0.15mm PETG and only uses 0,2 meters of filament. :)
Quick and easy print to keep your trash bags from getting sucked into your trash can. Print it out and stick it to an outside wall of your trash can with some double sided tape, place your trash bag into the trash can, feed the edge of…
Needed a simple cinch to hold paracord (550 cord) easily so I didn't have to tie the paracord for cloth masks. (ran out of elastic) This has enough friction to easily slide up against the back of the head and then hold in place. For…
Cover the cinch jacks on your devices to protect them from filth. FreeCAD file included if you need to adapt the distance of the jacks in the double cover. Printed in PLA, 0.4 mm nozzle, 0.2 mm layer height, 4 perimeters, no supports.
this is an existing item that i bought from a fishing store. i was inspired by the design to make my own equivalent. very useful for bundling up your fishing rod and other stuff. you can use any elastic cord you only have to adjust the…
Inspired by the Cinch Pick 2.0 by ShivWorks designed by Craig Douglas In no way is it a replacement or equal of the original. I made this because I live on the opposite side of the world where the Cinch Pick is made, plus the knife laws…
Three sizes included, or use the SCAD file to customize with Openscad. Print with snug supports. PETG is recommended for elasticity. Not a remix, but I was aware that jackw01 already made a similar one.
Our adjustable belt combines style and functionality to provide maximum comfort for any occasion. Made from high-quality materials, this belt is durable and stylish, perfect for complementing your everyday wardrobe or special occasions.…
I had a very tight RaceFace Cinch chainring to get off, so I made this. Printed in ASA with 5 walls, it got the ring off. I printed mine at 100% infill, but I'm sure 80% would be fine. The teeth are fairly fine and a 0.6 mm nozzle still…
Cinch buckle with open hook for 15mm webbing.
An RCA Y-adapter for stereo to mono downmixing to connect subwoofers with a single RCA input to sources with stereo RCA outputs. The box design is simple and not very fancy. The circuit is inspired by multiple sources [ 1 , 2 ] and should…
This is a bracket for securing plastic tubs, milk crates, or other containers with 1" ratchet strap. There are two STL files - the bracket itself, and a backplate that can be used for milk crates, or other containers that don't have a…
A small nylon string bag cinch. Super simple but effective. Print time 1-3 mins Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: 3D Solutech PLA White Category: Household
Simple print - I used 3 perimeters to zero out the infil on the wearer's right. Default .2 SPEED settings otherwise.
The original model had a tag that featured flat spots. Redesigned the tag so that it's a perfect oval. Left the original tag on the plate in Prusa Slicer for comparison. It's a minimal improvement; thanks to the original designer — he did…
A cleated rope cinch designed for 3/8" braided rope that can be used as an aid in lifting or securing loads or as a an alternative to ratchet straps for tie-downs. Basic assembly requires four (4) 3/8"x1" bolts and accompany hex nuts and…
Additional version with hook to keep on cable when in use Part of bigger collection: https://www.printables.com/@MichaMietlins_755343/collections/3185389
Use the preinstalled black screw to secure the printed adapter.
Have a draw string? Need a way to keep it cinched? Well, I've got just the thing for you! A simple draw string cincher, powered by a humble ball point pen spring. Print instructions Unassociated tags: ballpoint pen, draw string…
It might be a great inspiration for someone to change to their needs and other cable types. Remixes appreciated. The white PETG-Version can easily be marked on with a permanent marker.
Overview One of my Nintendo Switch Joy-Con strap's locking button broke a while back, and I couldn't find an appropriate replacement part to print, so I designed one. The cinch uses friction to hold onto the strap string, instead of the…
I created this for the Pinshape Men's fashion contest. Cinch is a simple, 3D printable belt that with standard belt buckles designed for webbing. Instructions Print using flexible materials like Nijaflex or Nylon. Cut to length Attach…
Do what it shows. Hold up to 9 sockets, 3 6 RCA and 3 minijack (female)
I received a package in the mail. And it came bundled with these amazingly-strong straps. It seemed like a shame to waste them and just throw them away. So I made these reusable clamps to upcycle them into zip ties. Except they are…
I recently became a soccer referee, and got a wrist lanyard for my whistle. It was too long and could slip out easily, so I designed this to cinch it to my wrist. It can be scaled for larger ropes like paracord 550 or nylon drawstrings…
Two mounts to attach the lock in the bike frame It's an elegant solution to attach the Ottolock Cinch Lock to your bike. It's not the safest lock, but since all locks can be picked, cut or destroyed anyways… Don't forget to attach your…
I was having trouble cinching down the fittings correctly and originally printed a “collar” (green in the image) that held the ring in place to be cinched. Unfortunately, in tight spaces it isn't easy to use it. So, I created a clip…
This design requires flexible filament to permit strap installation into the cincher, i.e., the center posts are bent to work the strap into the device. Designed for a folded yoga strap that is 18mm wide and approx. 5mm thick. Optional:…
I wanted to try using a cinch for the drawstring on a pair of casual pants; the drawstring in this case being cloth approximately 1/2" (12/5cm) wide by 3/32" (2.3mm) thick. After experimenting with several different version, I ended up…
Base reforzada y atornillable para cinchos (sujetacables), diseñada para una instalación rápida usando tornillos pija broca (autorroscantes). Ideal para organizar cableado, fijar mangueras o colgar luces de exterior e interior de forma…
