6044 modeli
Hi everyone, the Controller is designed to be printed standing up without supports. There is a bit of postprocessing required to remove the custom supports for the Trigger button flexure. Enjoy printing
Wydruk około 4,85 €–5,93 € nettoWstępna wycena jednego wariantu
IMPORTANT: This is just a model shell grip for a VR controller. NOTE: This is for the Oculus Quest 2/3 controllers. If you are looking for the Quest 1 version, see here . NOTE2: This will fit a Quest 3 controller, but it may be slightly…
Wydruk około 0,98 €–1,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Nice stand for game controllers. This stand is suited for xbox one and series x/s and ps5 controllers. It is inspired on Darth Vader from starwars. If you don't own a 3d printer or just want to buy it. You can buy it on my shop ←
Wydruk około 4,22 €–5,15 € nettoWstępna wycena jednego wariantu
I had a friend ask me to design a small controller stand, and this was my result! The design works great with all the controllers I have personally, including; Xbox One Playstation 4 Playstation 5 Very easy to print on its side, although…
Wydruk około 5,95 €–7,28 € nettoWstępna wycena jednego wariantu
About The Minimalistic Xbox Controller Stand by @agepbiz is quite nice. It offers a nice positive placement feel of the controller into the stand. It's also super minimalistic and perfect for modification. I was able to add slots for six…
Wydruk około 5,71 €–6,98 € nettoWstępna wycena jednego wariantu
Wall mountable xbox controller and headset stand, xbox logo on top part. Category: Video Games
Wydruk około 6,09 €–7,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a simple wall mount for a PS5 official controller and headphones. Just print everything out of PETG (I used Prusament PETG) and glue it together with superglue. To fix it on a wall, use Mamut Glue or similar one-component glue.…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed a toy for my son for when I'm playing on my PS5 so he can “join”, without endangering my real controllers, so I designed this easily printable little controller toy. Just look at this happy customer: Attention and disclaimer: If…
Wydruk około 4,64 €–5,67 € nettoWstępna wycena jednego wariantu
Update 12-06-2025: Added V2 of the controller holder. Removed tiny overhangs from the front pattern, that pushed through the bottom surface. Bottom surface should lay completely flat now! ---------- We bought our Nintendo Switch in the…
Wydruk około 2,96 €–3,62 € nettoWstępna wycena jednego wariantu
After building /u/GermanDarkness 's Remix of /u/isrussell 's model I had a ton of new ideas to implement! I rebuilt pretty much everything but still used his strum bar and face buttons in this iteration. The end product is primarily made…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
Manabun design is very accurate. I made quick remix for non-slip pads that I have at home. Dimensions 18 x 5 mm. Pads are very tight in holes. Print with 3 perimeters and 15 % lightning infill.
Wydruk około 3,77 €–4,61 € nettoWstępna wycena jednego wariantu
A very sturdy and clean design i made of a holder that clips on to my Xbox Series X to hold the Controller and Headset. The X infill is a seperate file and can (ofcause) be printed in various colors to match your style. You might have to…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hi! I didn't find any perfect fit low profil controller mount for my SKADIS pegboard so I did one myself. I designed it around a controller 3D scans so that it can be perfectly ajusted while remaining as discreet as possible. Controller…
Wydruk około 0,56 €–0,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a quick a dirty version of the Honeycomb Wall PS5 Controller Mount. Got a hold of a Dualsense Edge controller and wanted to make a new mount that would allow owners of these controllers to still use the Honeycomb wall. Works with…
Wydruk około 1,85 €–2,26 € nettoWstępna wycena jednego wariantu
Students will design a functional elevator model controlled by the Arduino system that will transport material (cylinder) to the given floors in the warehouse.
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
DualShock 4 (PlayStation 4 Controller) Holder for the IKEA SKADIS pegboard system based on the wonderful Xbox Controller Holder made by @LayerCake who helpfully shared their Fusion 360 source files. Thanks to Andreas on GrabCAD for…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
Hey there! Check out my website to see the latest products I've designed—now available for you! Don't miss out, hit the link and explore what's new! My Shop: https://buymeacoffee.com/cc3dprojects/extras My Website:…
Wydruk około 7,53 €–9,20 € nettoWstępna wycena jednego wariantu
8BitDo Pro 2 Controller Holder for the IKEA SKADIS pegboard system based on the wonderful Xbox Controller Holder made by @LayerCake who helpfully shared their Fusion 360 source files. A huge thanks also to @lowsc0re for the creation of…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
A simple stand for the (now old) Dualshock3 controllers from the PS3 era. I kept tolerances on the larger side, so it is more forgiving regarding exact placement on the stand for the price of a looser fit. I have only checked controller…
Wydruk około 1,24 €–1,51 € nettoWstępna wycena jednego wariantu
This is a 30.5mm to 20mm FC adapter. The 20mm mounting uses 2mm screws and can be tapped as is. Fits my Xrotor nano stack perfectly! Category: R/C Vehicles
Wydruk około 0,21 €–0,25 € nettoWstępna wycena jednego wariantu
Hello friends, This is a 3d print for everyone getting in to the fpv hobby on a budget if you have the ps5 controller ofc. it prints very fast and makes your accuracy a million times better. i suggest printing it at 19.5 mm for x/y
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
Organize your headphones, controller and charging cables with this unique stand featuring a built-in drawer for a clutter-free experience. Make sure to check out my matching stand for PS5 games:…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
Stadia Controller Holder for the IKEA SKADIS pegboard system based on the wonderful Xbox Controller Holder made by @LayerCake who helpfully shared their Fusion 360 source files. A huge thanks also to Coopey for its contour sketch of the…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
Some Oculus Quest games require you to make gestures with your fingers. This can be awkward, since you also need to hold the controllers at the same time. This attachment makes sure the controller will stay attached to your hands (unless…
Wydruk około 4,04 €–4,94 € nettoWstępna wycena jednego wariantu
Hello, Welcome to my profile, full of models and miniatures :-) I have a Playstation 4, PS4 controller stand for you. The controller fits beautifully into it and is an ornament to any collection of games and video games. The material I…
Wydruk około 2,56 €–3,13 € nettoWstępna wycena jednego wariantu
I like my controller to be stored out of sight, but still reachable from my chair. I recently discovered a model that would hang the controller by the joysticks. However, there is speculation that this will induce drift into the sticks…
Wydruk około 1,79 €–2,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A useless box that uses a single moving arm to press multiple switches. Partslist and build instructions: https://blog.hirnschall.net/diy-useless-box/ Video of the box in action: Print using a medium quality preset (0.2mm layer height).…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This file is a more rigid servo arm for the Rancher. The Rancher itself is NOT part of this assembly! If you want to print the Rancher, you will need files from third party as well. Files can be found at 3dsets.com. The Rancher has 4x4…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Introducing the Wire Lock Block for Xbox One S controllers. A simple 3D printed battery pack and cover that prevents the USB cable from being accidentally disconnected mid-game. Optionally the battery pack has a screw hole so that it can…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
Modifier File to add fuzzy skin to the handles only. Not perfect but works quite well. The world coordinates for the modifier are X: 0, Y: 4.30 and Z: 8.39. Takes some time getting it into the right place so make sure it looks like the…
Wydruk około 6,00 €–7,33 € nettoWstępna wycena jednego wariantu
Akai Professional Fire Stand (a snap on stand for the FL Studio hardware controller by Akai). Connect one side of the stand (Front or rear) to the Fire and then lightly pull and snap the opposite side into place. Originally printed using…
Wydruk około 2,02 €–2,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of the other model, incorporating splined inserts and matching splined halves to allow for 45 degree incremental rotation. No threads, assemble with #10-24x2.25" socket cap screw and nut. Version 2: Has deeper socket cap…
Wydruk około 4,63 €–5,66 € nettoWstępna wycena jednego wariantu
wall mount for quest 3 controller
Wydruk około 4,62 €–5,64 € nettoWstępna wycena jednego wariantu
Check out new version V3 on PrusaPrinters or GitLab
Wydruk około 4,91 €–6,00 € nettoWstępna wycena jednego wariantu
I created this design after losing my battery cover on a rough trail and finding that a replacement was out of stock everywhere. Even SRAM couldn't point me to an online shop with one available! If you take a close look, you might notice…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
SNES controllers are inherently stackable, so this holder takes that feature to the logical conclusion and makes it possible to store the controllers neatly as a single stack.
Wydruk około 3,40 €–4,15 € nettoWstępna wycena jednego wariantu
Please click if you appreciate my work :) A holder designed specifically for mounting on the Qube 540 PC case, allowing you to conveniently keep your gamepad within easy reach. 🔩 Design The model consists of two parts that fit together –…
Wydruk około 3,80 €–4,65 € nettoWstępna wycena jednego wariantu
I've created this ps5 controller stand because I wanted to place my ps5 controller at the top of the console when I'm not playing with it. It is a simple and target-oriented design. It consists of two parts. One is the bottom part which…
Wydruk około 1,45 €–1,78 € nettoWstępna wycena jednego wariantu
Double PowerA Nintendo Switch controller stand
Wydruk około 3,18 €–3,88 € nettoWstępna wycena jednego wariantu
There is a large list of radiator fan mounting models Alvomane's Radiator Booster UppsalaHenrik's 2x92mm fan ducts for radiator djtifosi' Radiator Blower Fan with magnetic holder simlrh's Radiator Fan schranzistor's Radiator amplifier…
Wydruk około 2,98 €–3,64 € nettoWstępna wycena jednego wariantu
This case was made to fit 4 of 8BitDo's Lite 2 controllers together with their charging cables. The dimensions of this case are: 19.3 x 10.5 x 7.4 cm (L x W x H) All parts of this model are single color prints which are glued together. I…
Wydruk około 0,92 €–1,12 € nettoWstępna wycena jednego wariantu
A stand for the easysmx x20 controller and its receiver. Basically like the original . I just added a cutout in the back of the stand to safely store the receiver of the controller, when not in use. I printed mine on a CoreOne. The sides…
Wydruk około 1,99 €–2,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
After remixing the pro controller holder for the first time with a Zelda - Tears of the Kingdom look (find this one here: https://www.printables.com/de/model/826335-nintendo-switch-pro-controller-stand-zelda-totk-re) I decided to do some…
Wydruk około 2,42 €–2,96 € nettoWstępna wycena jednego wariantu
It is a keychain for DJ or others
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
If you need to mount a GoPro (or any other camera) on your Traxxas TQi controller get that model and print it out! The camera mount is at 30° angle to let you navigate your RC model freely. I've tested it with GoPro 11 and 11 mini - at…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A version without the logo is included. Printing info: Requires support material. Brim recommended!
Wydruk około 1,19 €–1,46 € nettoWstępna wycena jednego wariantu
I needed a box for an PWM Controller for my conveyor, so I designed this simple Box in “Electricity Box Style” :) There is an hole on top, so you can fix the control dial up there. I printed my own, but you can use whatever you like there…
Wydruk około 1,60 €–1,95 € nettoWstępna wycena jednego wariantu
Xbox Controller mod for gamers missing a hand The Idea: For gamers missing a hand, the analog stick and front facing buttons can usually be manipulated using the stump. However controlling the triggers presents a challenge as there is no…
Wydruk około 0,39 €–0,47 € nettoWstępna wycena jednego wariantu
Small remix of a nice model for a PWM motor controller. The capacitator is a littlebit bigger for the case so I edited it a bit. Print settings Nothing special, I printed with 0,2 mm layer hight, should be fine with 0, 35 mm. Printed with…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena jednego wariantu
Mount for L298 Dual H Bridge Motor Speed Controller https://amzn.to/3wRm0ml
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
For PrusaBox modular front panel. Originally designed for the w1219 controller, but adapted for the Noctua NA-FC1 controller. Includes 10mm hole for a switch to control Pi. Retaining backplate also included. Also see…
Wydruk około 5,05 €–6,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The holder is for Remotes like this one: Trio Lighting for you or One Remote Control The holder should have a clearance of half a millimetre on all sides. For the Samsung Remote control I did not check the dimensions, please measure it…
Wydruk około 1,65 €–2,02 € nettoWstępna wycena jednego wariantu
Kombinace s logem
Wydruk około 3,42 €–4,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
With these extensions, you are able to use the switch controllers in PC FPV/drone simulators (like LiftOff). This increases the precision of the movements. In addition, a small part named shifter rises the right hand side controller to…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple two-piece case for small motor speed controller (see pictures) Layer high: 0.15 or lower Supports: No
Wydruk około 0,28 €–0,35 € nettoWstępna wycena jednego wariantu
A simple housing for the ESTLCAM USB CNC-controller. Additional components: - 4x M3x20mm screws - 4x M3 hex nuts Assembly should be self-explanatory. Supports for the inserts of the nuts and screw heads may be required.
Wydruk około 5,65 €–6,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This simply holds your controller and takes up very little space. It is very different from most stands. It will hold your controller via the type c connector. I have made a stronger version which I strongly recommend you use. I haven't…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
Fernbedienungsablage/TV Remote Controll Shelf - IKEA Bed
Wydruk około 4,57 €–5,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
“When using a wireless battery pack, you can plug this into the USB C port on the controller to block the bright LED light when playing in the dark. On my controller, I still get a very dim halo showing under the controller's plastic so I…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
This is a multi-part remix with new additions of other FC Mounts. This should fit into the HeeWing Ranger T1 Nicely and mount the buzzer/USB board nicely behind the FC. I am still wanting to test fit with the PDB and will do that soon, i…
Wydruk około 0,31 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Kresleno v PTC
Wydruk około 3,85 €–4,70 € nettoWstępna wycena jednego wariantu
Minimalisitc cover for the DJI Mavic Smart Controller
Wydruk około 2,72 €–3,33 € nettoWstępna wycena jednego wariantu
Thoughts: I initially started this project with a different thought process. I took the PS2 controller and started to remodel it to get a nice match. I also started to design different grip shapes. The problem?.. : The system would only…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The TC420 and TC421 are very nice and relatively cheap LED controllers for fish tank / aquarium lights. However, there is no cover at the connections, so I created a two-piece cover. The lower part will be screwed in permanently. The…
Wydruk około 1,62 €–1,98 € nettoWstępna wycena jednego wariantu
Check out the Alpakka controller, its a really nice project, and it works like charm, since I built mine, this is the only controller I am using for PC gaming. I made the joystick cap out of TPU and gave it a fuzzy skin in the slicer…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
Experimenting with using a PS5 Dualsense controller as a steeringwheel for driving-games. Model uses my snapon mount for the controller, you might need to add something between controller and mount to add extra friction so that the…
Wydruk około 7,31 €–8,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Part List Part Quantity Link 6x2mm 48 Amazon This is a gridfinity holder for the Dragonframe Bluetooth/USB Controller. Includes spots for two extra AA batteries as well as the USB cable. Gridfinity is the ultimate organizer for your whole…
Wydruk około 13,28 €–16,23 € nettoWstępna wycena jednego wariantu
This is a 3 piece model for the EC Buying YR1001 Fan control board. Available thru Amazon, AliExpress, Alibaba, etc for just a few dollars. I used PETG, you can print it without supports but the faceplate will turn out slightly better if…
Wydruk około 1,00 €–1,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Since i have only one hand working after a stroke, i need a holder for my rc controller. On this I mount the LifThor quick release and uses velcro to fasten in on my leg. With this my remote is stable while i fly my Mavic 3 drone using…
Wydruk około 8,46 €–10,34 € nettoWstępna wycena jednego wariantu
If you use modern LED ring lights on a microscope there is the control unit. With this base plate you can mount the photonic LED controller on a Zeiss Microscope with cable ties. The connectors on the backside are supported too and also…
Wydruk około 4,10 €–5,02 € nettoWstępna wycena jednego wariantu
Bracket to mount the controller on my Spark 3D SP1 at 90 degree to Machine. this is more suited to my desk setup as I have my printer sideways. No extra bolts needed. use the existing M5 bolts. the smaller holes are 4.5mm. either tap at…
Wydruk około 1,11 €–1,36 € nettoWstępna wycena jednego wariantu
Drehknopf für Hercules Pult in weihnachtlichen Stil. Knob for hercules controller (x-mas look)
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
Schnelle und einfach zu druckende Handy Halterung für den DJI N3 Controller. Es wurde so konstruiert das auch Handyhüllen funktionieren welche die weit herausragenden Kameras schützen. Für den Druck habe ich PETG bevorzugt genommen für…
Wydruk około 0,75 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
＜概要＞ PS5の純正DualSense 充電スタンド(CFI-ZDS1J)用の収納ケースです。 コントローラーを２個収納出来ます。 収納したまま充電も出来ます。 ＜組み立て方＞ body、top、baseの３パーツ構成です。 滑り止めが必要な方向けに、baseの裏面には滑り止めクッションを貼る場所が４箇所あります。 クッション穴は3M社の8×2mmのクッション「CS-102」に合う形状になっています。 STEP1…
Wydruk około 3,05 €–3,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a cradle of the Losmandy Gemini II hand controller for the Berlebach uni tripod.
Wydruk około 2,45 €–2,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
sorry for low effort pic
Wydruk około 1,22 €–1,49 € nettoWstępna wycena jednego wariantu
Im Rahmen des „ PrintClosure-Projekts “ habe ich diesen regelbaren Radiallüfter in das Gehäuse eingebaut. Zur Montage der Steuerung dient dieses Modell. Es kann direkt mit den im Gehäuse vorhandenen Bohrungen befestigt werden. Das…
Wydruk około 3,96 €–4,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
An MQTT-based, Home Assistant integrated GPIO control system for controlling legos. The Brickmaster RC supports one or two relays for 9v output, good for driving Lego motors or using as a replacement for a battery box. Can be used with my…
Wydruk około 0,68 €–0,83 € nettoWstępna wycena jednego wariantu
Simple and clean looking Xbox Controller Stand fits 8x3mm anti slip rubber pads (optional) Commercial license Do you want to sell prints of this model? You can purchase commercial licensing for this model by joining the Commercial license…
Stand for your Xbox controllers. Available with and without the Xbox logo. MMU2S version has the logo embedded in the STL. Use the split to parts button in PrusaSlicer to separate or load the 3MF file. Can be printed in the orientation…
The best Xbox controller stand is minimal and nearly invisible — keeping the focus on your controller, not the stand (🇦🇷 Designed in Argentina by @impuestito_org ) – THIS IS THE ORIGINAL DESIGN ✅ Minimal design. No supports needed. Weighs…
Xbox Stealth Controller Stand that displays your controller as if they are floating on your desk. The stand is sturdy and tries to stay hidden behind the controller itself. Printed with tree supports, brim, and 20% infill on an Ender 3 in…
I've tested this design with PS5 controllers, but it should work with many different controllers. If your console controllers fit, please let me know what you have so that I may update the model listing. 😃 This model prints on its side…
Simple scan of a ps5 controller I took so I could model some stuff. Thought others might find it useful.
PS5 Stealth Controller Stand that displays your controller as if they are floating on your desk. The stand is sturdy and tries to stay hidden behind the controller itself. Printed with tree supports, brim, and 20% infill on an Ender 3 in…
*The file was exported in inches. If it shows up tiny in your slicer, scale it up 25.4x I bought two used xbox controllers that didn't have the battery covers on them, and none of the designs I found online fit very well, so I went ahead…
Designed for Xbox Series X and S Controllers. I think it's compatible other Xbox controllers except those that use a battery pack. Note: The Xbox logo may require sanding to get it in place. Or you can paint the logo hole.
Inspired by agepbiz's Xbox Minimalist Controller Stand(https://www.printables.com/model/449970-minimalistic-xbox-controller-stand), and not being able to find one for the PS5, I decided to learn some new skills and create my own. I have…
Stable stand for Microsoft Xbox One/Series controller.
I remixed agepbiz’s XBOX Controller Stand because it was amazing, while respecting the design to make it suitable for a Nintendo Switch Pro Controller. The remix source is here.…
I redesigned the v2 version to be more rounded and sleek. Product Introduction: Hello everyone! I'm excited to share with you my 3D printed stand design for the PS5 controller. This stand is perfect for storing and displaying your PS5…
Rack and pinion steering for your xbox controller. 100 degrees of rotation. Enjoy finer control in racing games. Get the remastered version: https://www.printables.com/model/271330-xbox-one-mini-wheel-evolution What you need: 608 bearing,…
A 3D stand divided into two parts: the base and the tower. Specifically designed for controllers and headphones, the tower features arms with adjustable angles at 45, 66, and 90 degrees. This allows you to customize the stand for placing…
PS5 Dualsense Controller Stand
Rack and pinion steering for your PS5 controller. 100 degrees of rotation. Get finer control in racing games. What you need: 608 bearing, 22mm diameter, 7mm thick, 8mm center. Get one from that dusty fidget spinner you have laying…
Simple, easy and quick to print (around a hour) mount. Not a perfect design, might revisit later but works fine. Print instructions Category: Organization Print Settings Printer Brand: Prusa Printer: Mk2.5s Rafts: No Resolution: 0.2…
Rack and pinion steering for your xbox series X [S] controller. 100 degrees of rotation. Enjoy finer control in racing games. What you need: 608 bearing, 22mm diameter, 7mm thick, 8mm center. Get one from that dusty fidget spinner you…
Super simple model that I made by hacking together two other models from Thingiverse namely this PS5 controller stand and this Skadis hook . Aside from bodging the two together in Tinkercad I flattened the sides so that the model can…
Update 2023-04-30 Now updated to not require any screws everything just snaps together. Old version still available if you prefer it. Original Description Remix of my Xbox One controller holder for use with IKEA Skadis pegboard with an…
![Xbox series X [S] controller mini wheel](https://media.printables.com/media/prints/157078/images/1468543_a9941f77-2739-4f1c-a938-4d727942ca80/large_display_xs_wheel_fs_start_157078.jpg)
