2745 modeli
Make your dreams come true by building your own Enyaq Coupé. What makes this all-electric SUV so popular with a broad customer demographic is its sleek and timeless design, outstandingly efficient aerodynamics, and cutting-edge…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
Impressed by the new Škoda Enyaq and want to find out more about it? Visit our official website https://www.skoda-auto.com/models/range/new-enyaq-coupe The digital files for models of Škoda vehicles and the 3D-printed versions of Škoda…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
I really like the design of the magnetic PFTE couplers and I wanted to use it for a drybox. However I don't have MMU, only one tube is used at a time. So I designed a terminator to dock the tubes when not in use. To be used with M4 screws…
Wydruk około 0,15 €–0,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Use PA (nylon), PC or some other temperature-resistant filament. Do not use PLA, or carbon-infused filament, as it is likely to heat up because of its conductivity. Printed at 0.20m QUALITY settings with 40% infill.
Wydruk około 0,42 €–0,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I redesigned my 40° coupler from the ground up! The Fusion360 design is now more parametric, so if you want to mess with the angle, get the source here! https://a360.co/2BwCLdH It's also shorter, and has a smaller footprint in general. It…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a replacement coupling hook&spring for Playmobil wagons. Printed in ABS the spring is stiffer than the original Playmobil piece, but that also means the wagons are less likely to accidently uncouple. The uncouple-lever was left…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
Designed at the request of my college, it's a functional replacement for the original Kuplung. Due to the size and complexity of the model, it's a bit tricky to print. I can share my experience, but you will probably need to find your…
Wydruk około 0,77 €–0,95 € nettoWstępna wycena jednego wariantu
I measured this from some connectors I had in use, print solid for strongest results. I have used some cheap PLA to produce these and I've tested the pressure up to 8.5Bar, but YMMV and I take no responsibility for injury caused by using…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
This Keychain is 45mm in Diameter and a 4mm Base with 0.7mm letters going in (4 layers). the hole is 6 mm. 100%infill for the best strength.
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
Please enjoy this original design of a cuddling snow couple. There are three versions to choose from : Easiest, Whole Model Couple (Prints in single colour) Easy, Model with separate caps (caps & pompoms printed individually and glued…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
To be used between CoreOne and your drybox. Easy to install, easy to use. Just few grams of filament and few minutes to print. Instal with bigger chamfer towards the printer. Check internal opening for smooth filament movement in and out…
Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu
Very nice and classy Mercedes C123 Coupé Wall Art.size can be customized as wanted Accept suggestions for my next models
Wydruk około 1,88 €–2,30 € nettoWstępna wycena jednego wariantu
If you have purchased a Philips Sonicare toothbrush set for two people, you probably, like me, only have one charger base. My model quickly, easily, and inexpensively solves this problem. Just remember to switch your toothbrushes on the…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena jednego wariantu
Current conducting coupler for modeltrain are expensive. So both hobbyists and commercial vendors came up with the idea of a magnetic, current conducting coupler. This is my take on the that concept. What you need per car, so for two…
Wydruk około 0,25 €–0,30 € nettoWstępna wycena jednego wariantu
The original model had the PTFE tube feed directly into the print, which works fine, but I wanted one that supported PTFE couplers. I have not tested it yet, but I modelled them so they should fit. There is a version for the M10 coupler…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This Keychain is 45mm in Diameter and a 4mm Base with 0.7mm letters going in (4 layers). the hole is 6 mm. 100%infill for the best strength.
Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu
Odolná hadicová rychlospojka z ¾" na ½" (nebo opačně) s těsněním. Model je tisknut z materiálu PETG s podpěrami a skloněn pod úhlem 45° z důvodu odolnosti tlaku uvnitř rychlospojky. Soubor 3MF obsahuje též malou podpěru pro zvednutí.…
Wydruk około 2,95 €–3,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Se requiere un tornillo de 1 mm, similar al utilizado en reparación de lentes.
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
This is the core of a variometer (also called a vario coupler) used in radios from crystal type to the early vacuum tube radios. I strongly recommend using a filament with no pigment, as many pigments interfere with RF signals. Print…
Wydruk około 0,69 €–0,84 € nettoWstępna wycena jednego wariantu
When Talbot presented the Coupé for the first time during the Paris Motor Show in 1937, the visitors were impressed immediately.This very quickly gave rise to the terms “goutte d’eau” (drop of water) and “teardrop coupé”, which were never…
Wydruk około 5,66 €–6,91 € nettoWstępna wycena jednego wariantu
Should be printed în PETG (PLA is too britle). You can buy cheap UM2 collets pack (10 pcs - $2) here https://s.click.aliexpress.com/e/_oBiPN3h Also checkout the model with PC4-M6 Pneumatic Connector…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dvoudveřová varianta - coupe.
Wydruk około 3,91 €–4,78 € nettoWstępna wycena jednego wariantu
A friend of mine needed new Face Mask Couplings for his Laerdal CPR Doll. So i re-create this piece for Home printing.
Wydruk około 7,36 €–9,00 € nettoWstępna wycena jednego wariantu
This is a basic box to mount an ESP32 Max v1.0 Development board and four single MAX6675 modules (spi bus) that are compatible with K-Type thermocouples and a local display (i2c bus). The intent of this project was to be able to remotely…
Wydruk około 6,89 €–8,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
doporučuji tisknout z pevnějších materialů jako je ABS, PETG, PC,…. podpěry nejsou třeba pokud se vetší díl tiskne pod úhlem (na skosenou plochu) ----------------- I recommend printing from stronger materials such as ABS, PETG, PC,….…
Wydruk około 1,79 €–2,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This coupler connects the inner diameter of a 100mm vent pipe making a tight friction fit. The other side connects a vent cover from the outer wall. The outer part allows some flexibility of the commercial cover so it can be screwed into…
Wydruk około 7,31 €–8,94 € nettoWstępna wycena jednego wariantu
I've created a magnetic connector and coupler to simplify speaker wiring. Printing: The plug is designed in two parts (split in PrusaSlicer) Easy2Print, 0,2mm PETG without supports Coupler Easy2Print 0,2mm PETG with supports from base…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It always bothered me that I couldn't get the last bit of soap out of Method hand soap dispensers apart from rinsing out the bottle and washing it all down the drain - this seemed wasteful and unnecessary. Using this coupling, I can now…
Wydruk około 1,03 €–1,25 € nettoWstępna wycena jednego wariantu
This design is used to increase pressure of PC fans to get air pass through HEPA filters. Based on Noctua fans webpage.
Wydruk około 1,45 €–1,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
BMW 503 1956-1959 Coupe
Wydruk około 4,98 €–6,08 € nettoWstępna wycena jednego wariantu
A imprimer verticalement. Le poussoir et constitué d'un morceau de filament chauffé aux 2 extrémités. Attention celui de l'intérieur doit être assez petit pour rentrer dans le trou prévu à cet effet.…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
An example 3D printing can be useful also for mechanical parts manufacturing. Maybe someone find this model useful. My original coupler of Grain mill Bosch MUZ5GM1 has broken. It is made of some plastic material. So I decided to design a…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
The Rotrics DexArm / Hexbot robot arm combines with an optional safety enclosure box for laser engraving, with a built-in fan. However, there is no obvious way to attach a pipe or tube to guide the fumes outside. I designed a coupling…
Wydruk około 2,62 €–3,20 € nettoWstępna wycena jednego wariantu
This is a very simple coupling clip that can fasten two MatterHackers 1KG spools together. Installing these are difficult due to the small spaces involved and the sharp unfinished spool's inner walls. So do take care. Caveat: Due to…
Wydruk około 0,25 €–0,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted a non-destructive way to attach two MatterHackers 1KG spool together after finding inconsistencies with the inner structure of various spent spools I've accumulated over the years. I want to be clear, this is ridiculous for the…
Wydruk około 4,46 €–5,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The same model as the original, but with a 5x2mm version instead. My modifications were all done in Prusaslicer. The 3mf file contains all my (nonsense) changes with cylinders and negative cylinders, as I don't know CAD. If it's stupid…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
Jednoúčelová spojka pre spojenie pevnej rúry KG160 a flexi hadice D150 , použité pre odsávanie pilín na pojazdovej píle. Na strane flexi hadice je vytvorený jemný závit pre bezpečnejšie kotvenie hadice, preto je potrebné ju natočiť na…
Wydruk około 12,70 €–15,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Modeltrain_HO_1-87_LIMA_coupling. Need a 0,25mm nozzle for printing 0,05 mm layer.
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
Hose Couplings for Air ¼'' male fitting threads into bottom use clay, playdough, or rubber gasket around edge contacting boat use thread tape on print between air fitting apply soapy water to boat or welds in question apply printed nozzle…
Wydruk około 5,46 €–6,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Summary This is a model of a BMW M3 Coupé (E36) in a kit card style. Some characteristic details can be discovered. Equipped with separate exhaust ;-) After printing, the model can be assembled with the help of integrated connectors. The…
Romantic Couple Decor . Feel free to scale it as desired. Fast and easy print. Printed with Fuzzy Skin effect. Fuzzy Skin: All walls Fuzzy Skin Point Distance: 0.4 Fuzzy Skin thickness: 0.2 Happy printing! With more and more questions…
This is a 2024 AMG-GT 63 Coupe inspired 1/10 scale RC Car / Display Model. You can find detailed info and assembly process in the video below. Body is divided to 38 parts depending on the color and requires little to no painting. Pieces…
A couple garden gnome figures. Patreon, for license: https://www.patreon.com/c/Stigern
This is one of three options I've made available for Bowden PTFE Coupler C-Clip for the Adventurer (AD5M) Runout Sensor. OPTION 1 of 3 — Clone of the stock factory clip PLA. Print as oriented. I used 0.2 mm layer height on 0.4 mm nozzle.…
designed in fussion there are holes to hang them on keychain, pendant or everywhere else. I include 3 profiles. 3 colors, 2 colors, single color. The multicolor prints are printed in one plate with by object print sequence. The single…
A free kisses coupon inspired by Šimino 's model on printables Perfect for a gift for a significant other for valentines or any other occasion ;) Designed to be printed in multicolor without AMS, MMU, or similar When printing with 0.16…
Summary This is a model of a Dodge Viper GTS Coupé (SR II) in a kit card style. Some characteristic details can be discovered. Equipped with seperate exhausts ;-) After printing, the model can be assembled with the help of integrated…
AutoCoupler Cutaway educational model of an automatic coupler designed for 3D printed model trains. The coupling can be disengaged with very little force. Original Auto Coupler Check out the Dragon Railway ecosystem! Join our : Discord If…
selection of fittings for garden hose and drip watering hose... 1/2 inch (13-16mm)
The coupon has been remade! I made it slightly bigger, so the letters are 2 lines thick and 2 layers tall. There should be no more problems with printing this. Also, I added the Inventor project file if you want to edit. Simple coupon you…
This is a very simple coupler for joining 4mm ptfe tubes using PC4-M10 pneumatic couplers. I use these to quick connect tubes from my repbox straight to my printer or MMU2S. Category: 3D Printer Accessories
Simple garden hose quick release coupler. The O-Ring can also be found in my other models.
If you download the model, please don't forget to leave a like. Thank you! <3 Capture a moment of affection with this low poly 3D print, depicting a couple walking and holding hands. This minimalist design renders the scene in sharp,…
It's not a precise nor detailed model. It has simply 4 parts to show you the basic principle of a Janney coupler. Print in the position I posted. It's basically support-free if you print it small. Will need to add some support with the…
Keychain shape heart. Print 2 hearts, keep one for yourself and give the other to anyone you want. There are 3 files: “Heart two parts”: print two hearts at once, you can change the color of the filament above 2.0 mm. “Heart 1” and “heart…
Valentine’s Day is approaching fast, so of course Deltaprints couldn’t miss the chance to release another new design 💕 This time it’s a table decoration featuring a couple standing under a tree, designed as an elegant silhouette 🌳👩❤👨 The…
This is a high-poly replica of a red 1966 Ford Mustang modeled in Blender 2.8 and optimized for 3d printing. Enjoy!
NOTE: garden hose connections require a rubber washer to seal, unlike plumbing threads, the thread is not designed to make a seal. The GHT “standard” is weird, here's where I got help getting it into fusion360.…
Modern Couple statue, perfect for wedding decoration. Husband and Wife are printed seperately and can be pushed together to make the statue complete. The statue shows the unbreakable bond between partners. The model is 140 mm tall and can…
3D Scan of a Wedding couple Height: 15cm --------------------------------- 3D-Scan einen Brautpaares Höhe: 15cm
This Keychains can Join together and be used as one or by you and your friend or couple. We hope you like it!
Build Mod Hack 5mm to 8mm Coupler This is intended to fit a 5mm shaft of a stepper motor that has a D shaft and a 8mm lead screw Dimensions: D = 20mm H = 25mm Printing: Nozzle 0.4mm Layer 0.2mm Infill 35% Min. Hardware: Screws: 2 - 3mm x…
AutoCoupler - Dragon Railway 1/64 Scale Automatic coupler designed for 3D printed model trains. The coupling can be disengaged with very little force. Assembly Manual: Google docs Hardware required: M2 4mm screw per each coupler Used by:…
Remixed version of my dancing bride and groom. I sticked them together so that they are printable as dancing couple. Bride: https://www.printables.com/model/80591-bride-187-scale-h0 Groom:…
Elegant sclupture that captures the essence of love and unity in its purest form. Carved smoothly, it depicts twho figures gently leaning toward one another, making a heart with their bodies. Feel free to scale it as desired! Love is a…
Summary Slim RJ45 Ethernet Cap / Coupler that will save your ethernet cables and especially the plastic retaining tabs on your ethernet cables in bags cluttered with other cables. There is one open ended file to customize to your…
This is Coupon for a free 3D Print Inspired by Free 3D Print coupon by Ocelotzlasu It is slightly bigger and thicker and thought has a quality feel to it Settings recommended and tested: PLA 0.4mm Nozzle 0.2mm Layer height Arachne Wall…
This replaces the tube coupling on the back of the K2 Plus to allow connection of the side spool holder and the CFS at the same time. Can also be used with a drybox. Can be used with CFS buffer mounted on the printer or on the CFS.…
Remix of original Duplo/Brio Car from timqui - train wagons compatible with Lego Duplo bricks and can run on all basic wooden (Brio) tracks. In the original model, I missed the possibility to connect wagons to each other - so I decided to…
Sometimes you will lose or break a connector in your window blind chain. This simple project will fix it so you can enjoy a working blind chain again. It is designed for chains made of balls with diameter of 3,0-3,5mm.
Adorn your home with festive cheer using these two adorable Christmas gnomes, ideal for holiday decorations. Perfect for displaying on window shelves or welcoming guests at your entrance. Features: Design : Detailed, charming gnomes that…
Magnetized dust collection couplings are not my original idea, but I was tired of searching for a model that fit the many unusually sized dust-ports in my shop, so I made this one parametric. Assembly involves gluing your magnets into the…
I needed a simple nut for the PC4-M10 PTFE coupling when making a drybox. Nothing fancy, created in OpenSCAD with “Nuts and Bolts v1.9.6 OpenSCAD library” by biomushroom that you can find here: https://www.thingiverse.com/thing:965737…
Easy, quick printed way to help your Bowden couplers stay tight and strong. Print without supports, as oriented, using your slicer's finest “super quality” setting. Three (3) varied thicknesses of clips are provided: 1.00mm, 1.25mm, and…
Showcase the pinnacle of modern German performance with this 3D printable STL model of the BMW M4. This sleek performance coupe model is perfect for automotive enthusiasts looking to display cutting-edge design and exhilarating driving…
According to Prusa support, adding a little grease to the couplers on the XL Nextruder will help with the tool changer and also reduce the chance of layer shift and banding. The file was not made by me but by Prusa, but they don't have it…
After a few tries, we finally got it! A lil screw converter for toothpaste tubes. Don't print with supports. Update 3.16.23: I was informed by u/MillennialGeezer on reddit here that this design only works with Crest, that it needs to be…
Zip-Tie Garden Hose Coupler | 16mm Water Line Connector This simple yet effective 3D printed connector lets you quickly join two 16mm diameter garden hoses without specialized tools or fittings. Perfect for extending your watering reach…
Bring a sprinkle of enchantment to your garden, shelf, or 3D print collection with this adorable gnome couple! This lovingly detailed pair features: 🧙♂ A bearded gnome proudly holding a heart-decorated watering can, perfect for any garden…
Standard gardena / garden hose Y coupler. The required O-Ring can also be found with my other models. Happy watering :)
Standard gardena / garden hose T coupler. The required O-Ring can also be found with my other models. Happy watering :)
This is a bowden/PTFE tube coupler that fits an ECAS04 on each end. I've printed mine with PETG, but it should also work fine with other filaments like PLA, ABS or even TPU. I'd recommend cutting a chamfer inside each bowden/PTFE tubes…
Print with 30% infill, 0.1 layer height, 4 walls and 8 top layers. Sand mating surfaces of the middle part with 80 and then 200 grit. The top and bottom parts should print smooth enough to make sanding unnecessary. They should be able to…
Full set of couplers to add an additional lack table to the original lack enclosure. Print instructions Printer Brand: Prusa Printer: I3 MK3S Infill: 15% Filament: Prusa PETG
Working progress, will do some prints to bring it as low as possible. Remixed the Hochul Magazine Extensions File by @nnicclaascoupler to make the coupler, he did a great job, so the connection fits perfectly. Beware, if you connect two…
v2.0: Updated to be more like the design I did for the Polydryer. The updated design includes a 3d printed nut for stronger attachment. I noticed after a while the 1.0 version in PLA would get loose when heating ABS and ASA. It's…
This model has only been tested with the flat Sunlu resin bottles as displayed in the included photos. Hope you find it useful and please upload your makes! :D No Supports should be needed when printing in the tip up orientation. No…
Replaces the rotating coupler with a fixed one - if you intend to mount you spool holder on the side of the printer, you might be printing the Side Filament Guide Arm for P1P instead BOM 2 x original screws for PTFE coupler 2 x PC4-M10…
This is one of three options I've made available for Bowden PTFE Coupler C-Clip for the Adventurer (AD5M) Runout Sensor. OPTION 2 of 3 — EXTENDED HANDLE — Easier to use, both for removal and installation, because of having more to grab…
spare parts for LGB model train couplings LGB model train spare parts can be quite expensive, especially if you want to build your own waggons and need a lot of them. I redesigned the original coupling mechanism, including a softer and a…
Each part is about 21cm so it can be printed on almost every printer, rotated 45º. Just print it and glue it with some clips like in the picture. I've used T-Rex but I don't know if it is the right choice. A more detailed Instructable is…
My Gauge 2 Nederlandse Spoorwegen Fccpps wagon required European style coupling hooks. This is my attempt to design them in both 1:32 and 1:22,5. The printed items are screwed together with little M2 bolts for Gauge II. M1.6 bolts are…
AutoCoupler - Dragon Railway 1/64 Scale Automatic coupler designed for 3D printed model trains. The coupling can be disengaged with very little force. Assembly Manual: Google docs Hardware required: M2 4mm screw per each coupler Used by:…
Well....my daughter somehow lost her key to "start" her Little Tikes Cozy Coupe. As a parent I could not find it if my life depended on it, she hide it well. @_@ Any who I whipped up two different version in Fusion 360 based off some…
Here you have nuzzling swans, which will build if you print them twice, together one heart. There are two versions, the normal stylzed version and a lowpoly version. You will need supports for the especially for the beaks, mine was too…
Jedná se o zjednodušenou napodobeninu spřáhla ROCO.
Remix of my Free 3D print coupon. Add text and print with filament change or just print and write something with a marker. Enjoy!
cat key chain for couples. two pieces of matching cats for your keys
![New Angled Coupler for PTFE Tubing [PC4-M10]](https://media.printables.com/media/prints/37394/images/369595_474b669c-2177-4d92-bb73-0382863ed5f2/img_3225.jpg)
![[Option 1 of 3] Flashforge Adventurer (AD5M) Runout Sensor - Bowden PTFE Coupler C-Clip](https://media.printables.com/media/prints/1135017/images/8564847_4f16d96d-bbb0-4e30-b512-e6cbef000ca4_6b610305-5426-469c-81a4-ef02564ed108/2025-01-04-img_9970-ad5m-bowden-ptfe-coupler-c-clip-cropped-w-labels-printables-thumbnail.jpg)
![[Option 2 of 3] Flashforge Adventurer (AD5M) Runout Sensor - Bowden PTFE Coupler C-Clip with EXTENDED HANDLE](https://media.printables.com/media/prints/1137278/images/8582109_08a5091e-d6fd-4b16-aede-06f1f3f273cc_a863e0eb-efc0-4315-8953-1c3240258fd2/2025-01-06-ad5m-bowden-ptfe-coupler-c-clip-option-2-of-3-printables-thumbnail.jpg)
