581 modeli
This is for Zach Freedman's Gridfinity. It can hold 22 CR2032 or 44 CR2016 batteries, 12 357/303/SR44 batteries, and 2 A23 batteries (commonly used in garage door openers). The A23 slots can hold AAA batteries, but the holder will no…
Wydruk około 2,25 €–2,75 € nettoWstępna wycena jednego wariantu
Combined stackable beer crate for AA, AAA, 9V Block, CR2032 and a empty crate for batterys. The crate needs a support geometry at the bottom.
Wydruk około 1,71 €–2,10 € nettoWstępna wycena jednego wariantu
Gridfinity battery bins for CR2032-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 8 batteries. A 1x2x4 bin that fits 16 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…
Wydruk około 0,84 €–1,03 € nettoWstępna wycena jednego wariantu
Gridfinity battery bins for CR2450-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 5 batteries. A 1x2x4 bin that fits 10 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…
Wydruk około 0,83 €–1,01 € nettoWstępna wycena jednego wariantu
CR2025 and CR2032 box
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
Gridfinity battery bins for CR2025-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 10 batteries. A 1x2x4 bin that fits 20 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
Based on bambula's model, I just made some minor changes to permit the use of 1mm core cable & improved cable routing. This adapter allows you to use wires and a combination of AA, AAA or another 3V power source instead of the CR2450…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A battery holder/storage for 10 CR2477 batteries.
Wydruk około 0,87 €–1,07 € nettoWstępna wycena jednego wariantu
You can find both lid with “CR20XX” text or version with no embossed text. Magnets used are 5x2 mm. You do not need them to glue (you can) but you can just press them in with force. 20pcs version Lid: 125,5x33,5x11,5 (mm) Base:…
Wydruk około 2,36 €–2,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted a battery holder that I could place in a storage box and not worry that the batteries would fall out if the storage box tipped. I designed this simple holder with spring loaded sides holding each battery.
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
These are storage trays for different common batteries designed for the Gridfinity organization system by ZackFreedman These were all made using the Gridfinity Rebuilt project. I also increased the detail of the models beyond the default…
Update on Jan 25, 2026: Partial Height Bins are now available for CR2 & CR123A batteries. AA and AAA bins have also been revised to have an additional compartment. High-capacity bins have also been added. Gridfinity Stackable Storage for…
Remixed a caliper holder by Klave (linked) for the honeycomb storage wall. Hexagon's (connector) faces was offset by -0.15 for snap fit into the blank insert needed for the wall storage. The blank insert can be downloaded at…
Hallo Freunde, ich biete euch hier einen Batterie Organizer in Getränkekasten form zum download an. Ihr findet hier Kästen für AA, AAA und 9V Batterien. Ich hoffe sie gefallen euch.
Simple but sturdy storage for 10 CR2032 coin cell batteries. MK3 has a few minor improvements over the original/MK2: Lip to hold the top on Thicker dividers to make them stronger Slightly more clearance to make coin cells easier to remove…
Holder for a CR2032 coin cell batteries. Battery is securely held in place Single (3V), double (6V) and triple (9V) versions Designed for use with breadboard jumper/dupont wires or bare wire Total holder thickness is 7.3mm for the single…
Based on the block template i designed some gridfinity battery holders i couldn't find online (at least not in this dense packing). Fusion files and STLs included for these batteries 40x LR44 8x/11x/14x CR123(A) 20x CR2032 12x CR1632 Note…
Find out everything you need to know about the battery box on my blog: https://nerd-corner.com/3d-printed-battery-container-for-cr2032/ or https://nerd-corner.com/de/3d-gedruckter-batteriebehaelter-fuer-cr2032/
A half height beer crate to store 14x2 (28 total) CR2032 (or thinner) coin cells. Fully compatible with the original battery beer crate design. The gluable bottom part from the original also fits. Stacking two of these half height crates…
This is a remix of Tabb's Button Cell Battery Box from Thingiverse. It's a box for CR2032 and LR44 batteries. I have added four places where 4x1,5mm magnets can be fitted. This is a remix of this object:…
Minor redesign of jbergmans' 2032 battery storage. Can hold up to 8 batteries of types CR2032 and CR2025. Also see my model for CR1225 batteries: https://www.printables.com/fr/model/874743-cr1225-battery-holder Very easy to print, small…
This is a remix of the great battery holder by @dhiltonp . I've moved the slots and adjusted them to be 2 slots for CR20XX batteries and 2 slots for LR44/SR44/other 11.5mm diameter batteries. Gridfinity is a project by Zack Freedman ,…
This holder can contain 8 individual cr2032 batteries. Printed on a Prusa Mini in Orange Prusa PLA (Not Prusament) Part of the Gridfinity storage solution. What is that you say?
I love the beer crates for storage! My button cells needed a new home, so I remixed again :-) This is a remix of 2 things, the famous battery beer crates and and a similar model found on thingiverse. I made some changes to the original…
First of all, thank you for downloading my model :D Amount of batteries in configs: 2x1 CR2032 x 16pcs LR44 x 12pcs 1x1 CR2032 x 8pcs LR44 x 6pcs Print settings: Speed: any (depends on printer) Infill: 10-100% Number of walls: 3-infinite…
A small holder for a 5 mm LED and a CR2032 coin cell. Snap the pieces together to make a simple, battery-powered tea light. No glue or soldering needed. Print it upside down, no support needed. TIP: flickering LEDs are available and would…
CR2032 Battery Holder 1x 2x 2x2
Diese Box dient der Aufbewahrung von bis zu 20 Stück Batterien CD2032. Sie besteht aus einem Unterteil und einem Deckel. Der Deckel ist so gearbeitet, dass er gut auf dem Unterteil hält. Die Abstimmung von Haftung und Lösbarkeit habe ich…
I created this battery adaptor for my aqara motion sensor as I had plenty of CR2032 batteries but no CR2450. Version 2 is 4mm thick that fitted perfectly with the motion sensor. I have included the 5mm version for other applications.
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Pre-colored .3mf file included. Best to be printed in wall…
Since there is a battery holder design contest going on, I thought it may be useful to have a reference model of a CR2032 battery for which holder can be created. The model is measured from an Energizer CR2032 battery. Model can be…
Simple but sturdy storage for 10 CR2025 coin cell batteries. This is based on my CR2032 coin cell holder design, but the following User Parameters changed: cell_diameter = 20mm cell_thickness = 2.5mm See the original model under “This…
Holder for digital / vernier caliper. Relies on the “insert-empty” hex part (or similar x2 x4 joiner parts) used in the HoneyComb Wall. Further types of insert-empty can be found here (reduced friction) and here (rotated position). Hex…
Storage Box for AA/AAA/CR2032/9V Battery or /SD/Micro SD/or small parts 3 Type of lid type 1 full closed no stakable option no inscription type 2 for stakable option no inscription type 3 for stakable option with inscription infill 10 %
Printed with Prusament PETG Jetblack 0.3mm no rafts or supports required.
Find out everything you need to know about the battery box on my blog: https://nerd-corner.com/3d-printed-battery-container-for-cr2032/ or https://nerd-corner.com/de/3d-gedruckter-batteriebehaelter-fuer-cr2032/
Update 20240531: Fusion 360 file uploaded for customization. Battery name text could also be changed in PrusaSlicer by cutting the old text away and using PrusaSlicer's text command. Storage case for CR2032 batteries. Sliding lid allows a…
Simple CR2032 coin battery container.
Remix of container for CR2032 batteries.
This is an expanded version of Jason D Modular Battery Holder. I've made several changes to clean up all the “remixes” out there, make the modules truly standardised and “OCD friendly”. I was basically annoyed how different remixes…
Just a simple 2032 battery holder, holds 10 batteries
This is a remix of dhiltonp's battery holder that fits CR2450 and CR1620 batteries
I've always wanted to use this kind of coin cell battery holder for a project, and finally the time has come.. I am sharing only the battery part since my top secret project is on its early development stages. Hope you'll find the battery…
Simple 1x1 size Gridfinity container to store 8x CR2032 and 3x CR2430 Batteries Printed with: 0.6mm Nozzle 0.30mm Layer height 15% Infill
Added CR2032 Text works also with CR2025
Inspired by this design by arcaneoctopuslab: https://www.thingiverse.com/thing:4907153 I really liked the simplicity, but his design assumed LED's with longer connectors than the ones I use, so I made my own version that could support…
A remix of CAD-Guy's stackable beer crates that holds CR2032s. It's shorter than the standard crate, but I left enough vertical space to support the “hand holds” such that I could still fit a finger through. Another CR2032 remix was made…
Print the empty Bierkiste and this insert. Two of them stack on top of each other and fit inside the Bierkiste. Holds up to 20 pieces of CR2032 or smaller (CR2025 etc) coin cell batteries. Not very print-optimized yet: the walls could be…
Design description This is a gridfinity holder for 10 CR2025 Coin cell batteries. Block area is 1x1, and has a height of ⅔, stackable. Gridfinity description Maker-favorite screwdriver storage blocks for the Gridfinity modular workshop…
I needed a simple and small led light base for the small prints and models I have. The easiest way for me was to modify a cheap cr2032 coincell battery operated tealight design. So I did it.. It requires soldering some cables to the LED…
Holds 5 CR2032 coin batteries in a 1x1 Gridfinity container
CR2032 holder good for small led lamp or for other projects with battery CR2032.
Deutsch: Inspiriert durch das Design von Marzochi ( https://www.thingiverse.com/thing:5389119 ) habe ich meinen eigenen Bateriehalter gemacht. Er ist stabiler und auch stapelbar. Eine einheitliche Grösse macht es möglich auch AA, AAA…
The tray holds a total of 16 AA batteries, 16 AAA batteries and 4 CR2032 batteries. Print instructions The tray should be printed upside down to get a fine top side. Glue the bottom plate into the holder with some glue.
Best results came from being printed in PETG.
Half-height beer crate style containers for CR2032 and CR2477 coin cell batteries. Can be used separately or stacked after gluing the stacking piece to the bottom. The CR2032 container can fit 28 batteries while the other one should fit…
I have bought a couple of sonoff zigbee sensor (SONOFF SNZB-02) after some aqara sensor start failing, but differently from the latest they use the CR2450 batteries instead of the more common CR2032 I search printables and thangs for a…
Simple but sturdy storage for 10 CR2016 coin cell batteries. This is based on my CR2032 coin cell holder design, but the following User Parameters changed: cell_diameter = 20mm cell_thickness = 1.6mm See the original model under “This…
This is a small clip I designed to hold one CR2032 battery and one LED. I was designed to make lighting tabletop gaming terrain easy and fun. Please consider supporting me and my work at patreon.com/augustmcdaniel
This CR2032 holder was designed around two interlocking half-twist hex helices to provide an interesting look for this functional print. The inner tray slots hold twelve CR2032 batteries securely preventing the batteries from falling out,…
I created two models, each specifically designed for CR2032 batteries, with gridfinity dimensions of 1x1x3 and 2x1x3.
This CR2032 Battery Holder is a safe way to store coin cell batteries. The batteries snap into the holder but can be easily removed by pressing on the battery from the bottom of the holder to pop it out. There is a version that holds 10…
Stützen auf dem Druckbett aktivieren!
A remix of the CR2025 holder with more width to fit the slightly larger 2032 cells.
Scaled up a notch to ease up the tolerances and get the cells out easier
Holder for a single CR2450 coin cell battery. Battery is securely held in place Designed for use with breadboard jumper wires or bare wire Total thickness is 9.1mm Support free print Also check out my CR2032 holder .
the battery-box is based on brass_ring 's model. the main difference is that this consists of 2 parts and can be easily assembled with 2 clicks.
This is a Remix of Print-in-Place, Customizable Cases for Button-type Batteries made by fuchsr that will fit 10 CR2450 Coin-Cell Batteries. Please refer to the original model and its detailed documentation regarding Print Settings etc. :)
This is a fake/dummy battery that allows you to use any larger battery (eg AA or AAA) instead of the low-capacity CR2032 You will need 3D print "part +" 3D print "part -" copper washer (used as "+ contact") M14x20x1 -…
UPDATE 2025/01/19: It seems my model got messed up prior to uploading to Printables. I have uploaded now a fixed model with a battery gap of 3.75mm (on paper, which is the loose fit) and will also recreate the tight fit model (3.45mm…
This organizer holds 60 AA, 65 AAA, 9 9V and 22 CR2032 batteries. I used two colours because the filament ran out during print. I printed it in PLA, using lightning infill. No support needed.
This is a custom made battery box organizer for 20xAA, 20xAAA, 2x9V and 4xCR2032. Print Settings Material: PLA Layer height: 0.2 mm Perimeters: 3 (you can use 2 but the sides flex a little when you push) Top layers: 4 layers Infill: 15%…
About: I usually use CR2032 and small button batteries (such as LR44) only, and could not find anything small that would suit my needs. Can be used with 6x2mm round magnets used in gridfinity sets. Big hole diameters - the one on the top…
This is a 1x3 Gridfinity bin that holds 15x CR2450 coin cell batteries. If you'd like it in a different size, let me know!
Battery case for 10 CR2450 coin cell batteries. Premade Remix from customizable Print in Place.
Remix of MilStrata Manufacturing's CR2032 battery holder to hold CR2450 batteries. Thanks to RetroGameRevival for the Fusion360 wrangling.
Don't want your coin cells to flip around in their slot when adding or removing batteries? Want an even easier way to efficiently use this functional and space saving design? can hold these coin cells/batteries (2 slots for each group):…
Gridfinity model for 10x CR2450 coin cells
As I wanted a removable battery driven crystal light with an integrated switch, I redesigned the bottom half to fit my needs. (Original: https://www.thingiverse.com/thing:2461569 ) The base of the crystal is designed specifically for the…
This is a portable CR2032 case that measures just ~6mm thick with a top that snaps close. The button cells are held by clips. The positive and negative marking holes serve to suggest the most secure orientation to place the batteries, and…
Successfully printed using the PLA PM Metallic Green. Printer: Prusa Mini Layer Height: 0.15mm Infill: 15% Supports: None Other batteries holder having the same design: https://www.printables.com/cs/model/31365-aaa-battery-holder…
This is for Zach Freedman's Gridfinity System. It's a 1x1 CR2025 Battery Holder. Holds 9 batteries. With magnet holes. This is a remix of the Gridfinity battery holders by HusHageHobby.no who has holders for CR2032, C, D and other types…
Gridfinity holder for CR2450 batteries.
This model is a remix of tony 's " CR2032 battery holder " I have modified tony's original model to have text on the front that states the battery name, making it a bit easier to quickly grab and identify if you have multiple sizes of…
Find out everything you need to know about the battery box on my blog: https://nerd-corner.com/3d-printed-battery-container-for-cr2032/ or https://nerd-corner.com/de/3d-gedruckter-batteriebehaelter-fuer-cr2032/
Sturdy case for CR2032/CR2025/LIR2032/LR44/SR44 coin batteries with screw attached lid
1x1x3 size CR2 Battery holder for Gridfinity system
Remixed the Parametric Rugged Box to be smaller and have slots to hold up to 12 CR2032 batteries. Requires 6 M3x30mm screws to assemble. The design is intended to have some EVA foam installed on the top side for a snug fit and to deaden…
Added “cr2_dim” to scad file to generate a 2x2 battery case! Thanks to kpreid!! https://www.prusaprinters.org/de/social/8504-kpreid/prints
MOE AAA & CR2032 Grip Insert by Qwerm An insert for a Magpul MOE grip that holds one CR2032 and three AAA batteries. Print Orientation: Print everything on it's flat side (facing up for the base, facing down for the cap). Settings used:…
Storage for 16 CR2032 batteries. Also usable for CR2025.
I hate this coin cells / button cells don't know what's the exact description is for this batteries in english. These cells have 3V so, it's the same as two AA in series (2times 1.5V) Just solder the wires of the AA-Battery Holder (Or…
Large Battery Organizer Tray. Holds 40 AA, 40 AAA, 6 9v, and 9 CR2032 batteries.
This is supposed to be used on a Skadis IKEA wall together with T-nuts . You could also mount it directly to a wall or a cupboard. Print with support!
A remix of JABB - Just Another Battery Box . This version has a thicker clasp to help prevent it from breaking too easily. Recommend printing with 3-4 perimeters to give the clasp even more strength.
cr2032 battery holder for tiny remote control I make it 0.08 layer height
I was heavily inspired by this CR2430 Adapter to Wire Pigtail . However, I needed to replace a 2032 battery, so I quickly created this adapter. (I used an AA Makeshift Battery Holder as a battery case.)
I actually never expected to own more than a few CR2032 batteries, but here we are. The model requires well tuned support interfaces for a clean print. The dimensions are ~32×32×42 mm or ~32×32×61 mm for the larger version. Update: 2-part…
remixed to fit my 5x2,6mm magnets
![[gridfinity] Coin Cell Battery Box: EASY REMOVAL/ADDING with finger or wedge (CR2032/CR2016, 357/303/SR44, A23/MN21/AAA)](https://media.printables.com/media/prints/734837/images/5755001_03a129d4-d179-43cf-959a-eef3b9b9bc27_df25febc-8afd-4e3f-82dc-74820d28b85c/coin-battery-box-000-overview.jpg)
