443 modeli
*** Assembly Videos At bottom of this page*** Are you new to Black Crow Prints? All the STL files are here free on Printables.com. A non printed parts list is below along with easy step by step assembly videos. Help is available, usually…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
RC crawler obstacle for your Axial SCX24 or Traxxas TRX-4M! Designed to fit just on a print bed for a MK3s. Wide enough for both an Axial SCX24 and a Traxxas TRX-4M. I printed this in PETG (but PLA works as well) using fuzzy skin to help…
Wydruk około 18,71 €–22,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
RC Crawler Obstacle #5 - the Chevron Bounce. Designed with the Monster Truck chevron pattern in mind, and trying to really upset the suspension of the crawler. I printed with PLA and turned fuzzy skin on to help with traction. You can see…
Wydruk około 16,16 €–19,75 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 8,90 €–10,88 € nettoWstępna wycena jednego wariantu
A small 1:10 tool box for workshops, as a decoration for crawlers or similar. Be careful when assembling, do not tighten the screws too tightly, otherwise the bars on the lid and hinges may break. The last picture shows where which screws…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Spielende Personen / Playing People als 1:10 Verkehrsschild. Die Rohre einfach auf der Rückseite aufkleben! Druckeinstellungen: Düse 0.4 Schichthöhe 0.1 Material: PLA schwarz blau weiß Farbwechsel bei: 0.6mm 2.1mm viel Spaß dabei!!! Edit…
Wydruk około 0,79 €–0,96 € nettoWstępna wycena jednego wariantu
All of the course sections were developed for my 1/30th scale Axial SCX30 Chevrolet K10 pickup but they are probably suitable for other 1/30th scale crawlers. This video shows the course being driven. Everything was designed using Fusion…
Wydruk około 0,28 €–0,35 € nettoWstępna wycena jednego wariantu
Hey guys! I hope you enjoy making this lure. Check out my video where I share my process of making the lure: Tungsten weights https://a.co/d/fr5lhML Crawler wing kit https://www.sugartitcustomlures.com/p... Hook rings…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
1.10 rc crawler tavan sepeti.
Wydruk około 6,01 €–7,35 € nettoWstępna wycena jednego wariantu
🎃 Spooky, fun, and articulated! These mini Jack o' Lanterns are perfect for Halloween decorations and play. 👻 Printing Instructions Profile: Use your standard 0.2mm profile for printing. Seam: For the pumpkins, set the seam line position…
First attempt at building a modular course. made it free for anyone else looking to build one on a budget. Should work great for 24 and 18 scale crawlers. I printed mine without supports and 0 infill to speed up the printing time and save…
Morrigan Rock Bouncer 1:8 Scale: __________________________________________________________________________________________________________________ Are you new to Black Crow Prints? All the STL files are here free on Printables.com. A non…
************************************************************************************************** These transmissions are intended for use with “Thumper” and “Morrigan” 1:8 scale models. Thumper -…
Crawler Obstacle #1: Simple mountain. Exactly as it sounds - a typical mountain climb for an RC crawler. Scaled to fit exactly on a MK3 print bed, and width right for an SCX24 or TRX4M. I printed with PLA, turned fuzzy texture on to help…
RC Crawler Obstacle #3: Flex Twist. An obstacle designed to test the flex and twist of your Axial SCX24 or Traxxas TRX4M! As created, it will just fit on a MK3 printbed. Printed in PLA with fuzzy skin to help with traction. You can see it…
Persian Cat inspired from the book Dungeons Crawler Carl. We made it as a present for our friend :) How we put the glasses onto the cat: We put magnets on the 3D model inside the cat's eyes and on the back of the glasses. We have a store…
RC SCALE EXPEDITION OFFROAD CAMPER I recommend following the Build Guide when assembling. The list of necessary hardware is in the Build Guide. Please contact me in case of questions or any confusion. If you like it, you can [buy me a…
RC Crawler Obstacle #2: Complex mountain. Made from some simple geometric shapes, this obstacle really can be challenging! Designed to fit directly on the MK3 print bed, and fit the track width of an Axial SCX24 or Traxxas TRX-4M.…
Axle stands to display your 1/10 scale RC crawler without worrying about getting flat spots on your tires. Keeping the load on the suspension instead of the center skid plate helps to keep the normal ride height - it just looks cooler.…
This is the customizable bridge for 1/18th and 1/24th scale crawlers, like the TRX4M and SCX24. There are 3 bridge support sizes, 50mm,100mm, and 150mm. Each bridge support comes in 2 variants, flared base, and stackable. The stackable…
This 3D-printable model draws heavy inspiration from other 1:12 and 1:16 scale models. Every component was designed from the ground up specifically for 3D printing. Not much into RC's? Check out this flexible rolling chassis instead!…
I made a low poly version of my Princess Donut model! You can use it either as a Persian Cat model or just as Donut. NOT AI. Modelled in Zbrush / Blender. Rendered with Nomad Sculpt. I made this model as a gift for my friend who is a huge…
Inspired by my son - after he took my “wave” crawler obstacle and turned it upside down! Seriously! A simple print - that when turned upside down becomes a simple teeter-toter or balance-bridge for your rc truck. Can you get it to…
This is a 1:60 scale version of the NASA Crawler that transported the Saturn V and LUT, space shuttle and now the Artemis from the Vehicle Assembly Building to the launch pad. You can build the simpler Saturn V version or the newer space…
You need 4x 6700 bearings; 15x10x4 screws): 1x M3x25 12x M3x16 16x M3x20 2x M4x30 2x M4x8 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0,2 Infill: 20% Filament: Nebula PLA Category: R/C Vehicles
Access pre-supported files & more by supporting me on Patreon!
************************************************************************************************* Dec 10-2023 Thumper axles have been updated for strength. The assembly videos for the old axles are still available in the description of…
Combined and rearranged some rocks into a larger pile
UPDATE 15/03/25 : added a v2 with bigger outer zone to fill with gyroid pattern. I printed it with 3% infill to have a really soft insert. Print with TPU, no support, no top and bottom layers. Gyroid infill, like 3%. You can experiment…
This design is a CRAWLER Gearbox that can replace the stock 2 speed automatic GBX in my UNIMOG RC Chassis (model U5023) . It is smaller and looks more like a gearbox ! The idea is to make the truck more of a crawler type with a lot of…
I remixed it to include a void in the middle, to save some time and filament when printing. I also fixed a missing layer under the main arch that would cause the print to fail. I would strongly recommend not to print the original without…
Boxes - it looks simple - but you better go through it just right! Get it wrong, and your axle will get hung on them! Inspired by the flood of Amazon boxes that happen in my house… Printed in PLA Check out my other obstacles as well!…
Not my model, but cannot find original source to credit the designer. I believe it was taken down but if I find it reuploaded I will credit the author. Regardless, love this design and had to share it with Pintable's community :) .2mm…
This is one of the trucks on the Apollo crawler that transported the Saturn V and the Launch-Umbilical Tower from the Vehicle Assembly Building to the launch pad. Each truck was driven by four electric motors. This model is based on a…
I recommend following the Build Guide when assembling. Please contact me in case of questions or any confusion. The model is provided as is. The necessary tools must be available for assembly. If you like it, you can [buy me a coffee] .…
Hello all, I always wanted to build a Trailer to tow my Rallye or Touring Cars. This my 4th version … For Assemby i only used M3 Hardware and for the axles i used Tamiya M-chassis freeweheeling Axles on 8 1150 ballbearings. For Attachment…
Traffic cone 1/24 scale, RC crawler gates
This is a wall mount for 1/10 scale RC rock crawlers. I wanted to get my 2 crawlers off the desk. It was designed based on Element Sendero SE and Element Ecto. The idea is that the transmission mount will sit in the recess and the rails…
Star Wars Sandcrawler. Updated 1/14/2026 Amazing Sketchfab model by tegnemaskin Fixed for 3d Printing. Added overall .4mm No UV details needed.
There are three ways to print this. As single piece :- Please download STL file but there wont be any movements. Multiple Pieces :- Download 3mf file with Full_dismantled.3mf. BEST QUALITY OUTPUT . Please use the 3mf file for assembly…
3D MODEL DESCRIPTION It is the funny bluetooth car, that overcomes small paper boxes. You need just 3D printer, Arduino, phone, 5V power bank and 4 ballpoint pen! Step-By-Step user guides: EN: here CZ: zde Parts list: here Main…
MRC24 is a m icro RC R ock C rawler in approx. 1/ 24 scale using small hub motors to directly drive all wheels. It's a fun toy to climb slowly rocks and terrain. All main parts are 3d printed: chassis, front and rear axle. However, you…
Neeeeeew Achievement!!!! Some weird guy spent weeks sculpting a grown man in their underwear, paying painstakingly close attention to detail…all the way down to his tastefully placed toe rings on his little tootsies. This was all due to…
This is a set of small bridge "planks" that can be printed to make a bridge any size you want. All of the planks are wide enough for a 1/18th scale crawler and smaller. They have a 4mm passthrough hole for the "rope" sized to fit standard…
The Wave! This one is challenging - you better have good tires and good weight distribution. The “waves” are spaced right about the wheelbase of the smaller crawlers. Your truck will have to pull up both front and rear tires. Printed in…
HP Robot Otto Crawler bulldozer Similar model to my previous one, the change is in the bulldozer tracks The original model of the Otto is not changed , I only added accessories- Rims, Tracks, Blade, Lights, Scraper. Attach the discs to…
1/24 Scale 1996 Ford F250 for Axial Crawler Body
Because of the availability issues of the original Traxxas part TRX9776R i've decided to recreate those exact gears to print on my resin printer. Print everything with supports to avoid the elephants foot, and orient all gears as shown in…
General description I was looking for a simple, flexible and affordable chassis for my many scale crawler projects. Nothing was optimal and I developed something myself. The chassis is based on the TFL-Racing carbon rails for the SCX10…
Signage for the Desperado Club from the book series Dungeon Crawler Carl. Color layers in the slicer at .2mm 0 - 13 (2.6mm) - White (I'd try black or a darker color, too many shadows on light color) 14 - 19 (3.8mm) - Red 20 - 37 (7.4mm) -…
Very basic and simple stand to lift the tires off the shelf to keep them from getting a flat spot. Use as stand alone or join with 3/16" dowel. Lay on it's side to print. Do two at once and you have a set. Print Settings Printer Brand:…
Simple print to test the sidehill of your mini rc crawler! Print a few of these and put them together in different orientations. Each way creates a new path and challenge. I printed in PLA.
This mod only works with the [Cheater B540C transmission] included here. [B] is the gear ratio [540] is the motor mount, [C] stands for Clearance. If you are serious about crawling a Thumper model, this transmission and frame setup…
This is part of the Apollo Crawler Transporter. The arms attach to the side of the main structure and hold the trucks. Four arms are required. Note: The FlagDecal and NASASymbolDecal png files are used to print on vinyl transfer paper to…
I made this just for fun. The pins will be improved, but they work quite well. Youre print-settings are pretty much irrelevant. But make sure you print the spacer part in .15 layer height.
Jack stand - Chandelle pour RC Crawler. Hauteur de 45mm à 75mm. 1 Chandelle 1 Rallonge 1 Bride
The structural end detail contains a fuel tank, two radiators, flooring and various support columns. The parts list is for one end structure, two are required. Note: The FuelTankDecals and HazardDecals files can be printed on a vinyl…
General Description: For my many scale crawlers I was looking for a solution to change the battery quickly and easily. I've uploaded several battery boxes here. Check out the pictures. Use them for example for RC4WD Chevy K10, Mojave II,…
This is the center structure details of the Apollo Crawler. Note that the two sides are not identical. One of the sides has a control room and the other side has radiator vents. Note that the Side 2 Skin is the same for Side 4 as well.…
This is a model of the cabs on the Apollo crawler. There are two seats and a console that need to be painted something other than the light grey. There is also an A/C window unit on the back wall that should have the rear and side panels…
This is a hitch assembly I designed for a 1/16th scale RC car. The exact car and trailer I have are: RGT 136161 1/16 2.4G 4WD Rock Crawler:…
Designed to hold my TRX4M as a stand or to see how much flex I'm getting. The small stand I think looks better. But the taller stand you can tilt the rig on the ramp itself, as the diff catches the ridges on the ramp. Otherwise it's a…
A Crawling Claw. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/minishev Patrons have access to all my files in one…
I designed this to work with an rc plane motor I had lying around (a Flite Test 2218) but I never got around to actually printing and building the entire thing. I was able to build and test one of the axles, but that's as far as I got. It…
This is part of the Apollo Crawler that transports the Saturn V. The walkways go all the way around the crawler. Below the walkways is a two tier cable tray. Notice that between the two cable trays I added some small black wire. Note:…
Here is a set of Crawler Course Gates that can be used in your scale RC crawler course builds. The gates included in this set number Gate 1, through Gate 15. Each of the numbered course gates, are a pair. Meaning each pair includes the…
1/200 Crawler for Kmobrain Space Shuttle model !!! Main Structure Assembly Instructions !!! 1. Stick the white plate first on the main top structure. 2. Stick the side parts on the main structure. 3. Stick the bottom on the structure. 4.…
**********UPDATE 8/19/25***************** I just added the Power Bank files below. I forgot to upload them the first time. Sorry. If you already downloaded the files, just get the files in the Power Bank folder.…
This is a remix version of the Si1verEag1e's 1.9 Crawler Tire Inserts specifically design for the JConcepts Raptures. Though Si1verEag1e have a 120mm x 40mm I have made adjustments in the inner ring diameter from 48.26mm to 55mm to…
I'm incredibly proud to introduce you to my newest design, the Crystal Crawler ! This adorable, articulated little crawler is ready to steal hearts! Designed with love and attention to detail , this dragon is covered in countless…
This is the 4x4 Crawler Exclusive Edition set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the…
Mercedes Sprinter van model shell. Hollowed out remix with extra reinforcements for the side view mirrors. Built around a 133.5mm crawler chassis. Printed upright with internal supports but could save a lot of print time and material by…
THIS PROJECT IS STILL ON PROGRESS, WILL BE UPDATED PERIODICALLY. This is the design of a Competition RC Rock Crawler for the Super Class competition category. This kind of RC cars are not designed for speed they are designed to climb over…
Chassis stand for the Axial SCX24 micro crawlers Designed fairly generic so it should fit most crawlers.
Snake Crawling out of Mouth of Skull. The back is flat. (add your own screw mount) Test #2 with new Displacement technique. Works pretty good. This took less than 30 minutes from start to finish to create. AI + Depthmap + Blender.
A wall plaque of the magnificent princess Donut from the book series Dungeon Crawler Carl written by Matt Dinniman ( https://www.goodreads.com/series/309211-dungeon-crawler-carl ). Printed with PLA and 3 color swaps. Phosphorescent green…
Start/Finish gates intended to be used with the SCX24 - Cone To finish off the Crawler Course you will surely need Start/Finish Line gates. Multi-Color Gates can be achieved by a simple filament swap to achieve the Black-White checked…
My 3D printing started with a buddy who gave me his old Ender 3 after he couldn't get into the hobby. After 6 months of obsessing with the Ender, it was time to pay him back with a custom RC trailer for his Traxxas bronco! Lots of M4…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
I made this model because the existing ones usually had issues when reversing. There are two major changes in my design: The skis are symmetrical so reversing shouldn't be an issue The skis are higher to avoid compatibility issues. To use…
This is a small hobby grade 1/43 crawler, that i named "Smawler". Say welcome to desktop/couch crawling, everywhere. UPDATE 03/06/2026 : Open Sourcing the model. Feel free to clone/modify/share the model. Please give credits if sharing.…
Made some new shoes for my SCX10. 3 piece, used 10mm m3 screws to hold them together.
Modeled literally off of a set of deep dish slots for MOPAR/Ford. Print these in the shiniest silver filament you can find. I use YOUSU off of Amazon (https://www.amazon.com/gp/product/B0854KYS6F) It will only work with hubs that support…
You can choose to use it as two ramps or connect them with middle_piece.STL and endcap.STL to make an bridge. To connect you will also need 2x 10mm M10 screws. You need an 200x250mm bed to to print the bridge in full length
You need: 8x 20mm M3 screws 4x part1.STL 4x part2.STL 2x part3.STL 2x part4.STL 2x part5.STL or part5_short_version.STL 4x support.STL (needs to be glued on) Glue
I bought some crawler Wheels, but wanted to design some of my own, since i cant buy some of the same kind. If you really want to use them, you should print them in TPU and fill them with Donut shaped foam. There is also a Second split…
Decorate your crawler-track with this small finish line banner Consist of 5 part: banner.stl foot_small.stl (you need 2) pillar.stl (you need 2) No supports / rafts needed Maybe you have to glue the parts together
Roof rack for Crawlertrailer from thingiverse. The railing must print twice. https://www.thingiverse.com/thing:3543490
Servo Mount Stand for RC Crawler 1/10. PETG or PC recommended for strength and durability. The file CrawlerServoHolder.stl should be cloned and mirrored, as per the print orientation image. Use support and check option for support only on…
Versions: v1 - prototype version, without threads and tightly fitted
This 3D-printed body is designed to work with the [CYOBrain] custom PCB and 8 servos. It's part of the CYOBot family, an open-source robotic kit help folks learn about robotics that we launched on Kickstarter . CYO actually stands for…
Test your flex, hold up your rig, store some tires. A no frills, simple, scaleable flex ramp.
This is the solution if you want to store your favorite RC model crawler without having flat tires First version (v2) was a bit too flexible, so I made the second one (v5), which is more stiff. I added a photo of my favorite jeep wrangler
Axelstand for your rc crawler more specific Axial SCX10 III portal axels AR45P (AX1232022, AX232023). Can be used on front and back. Hardware 2x M3 x 8mm Cup screw 2x M3 nut For more info in swedish Buttyboys.se…
Hi, I desgined these Beadlock rim for my 1:12 scale project KamaZ 5350. To get a scale optic I decided to use the screws from the inside. The outher ring are 15x M2x16mm. The inner 10 srews ar more or less for the scale optic. 10x…
The Carrion Crawler is so cute and derpy in 1st Ed AD&D If you want to help me keep making free models or to tell me what I should make next please check out my Patreon Category: Games
🤖 Comet Crawler – A DIY Walking Robot Designed by Jorvon Moss (aka Odd-Jayy) , the V1 Comet Crawler is a fun and approachable introduction to walking robotics. Inspired by the Kame robot, this design focuses on simplicity, affordability,…
