5574 modeli
This is a tool that does an excellent job at cleaning your rod. It clamps snugly on the 8mm 3D printer or CNC leadscrew, you can remove your hands and let the printer do the rest of the work. This is meant to be used on any printer with a…
Wydruk około 0,80 €–0,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
For this build, you will only need 6mm wide foam tape. Different foam thickness files are available. I recommend to use at least a 2mm foam. With less than that, it will be hard to have enough compression for a good seal. PLA should be…
Wydruk około 1,63 €–2,00 € nettoWstępna wycena jednego wariantu
A small holding case of the standard tools provided with most entry level printers (EG: Creality Ender series). Good for on-the-go storage for quick simple maintenance on most 3D printers. Side 1 holds: Clippers Screw driver 4x spare…
Wydruk około 7,14 €–8,73 € nettoWstępna wycena jednego wariantu
I designed those for two reasons. First, it's a pain to handle the bottom panel with the fan cable still attached to the motherboard. And second, when printing ABS, I was astonished to feel how hot the frame was. And I didn't like the…
Wydruk około 0,75 €–0,91 € nettoWstępna wycena jednego wariantu
Creality Space Pi is a nice filament dryer. However, there is one major flaw (similar to some other dryers, like Sunlu S2) - it does not vent out the humid air. This traps humid air inside the dryer, making it hard if not impossible to…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
OUTDATED VERSION This version is no longer maintained. Please use the current Duender Project: Printables: https://www.printables.com/model/1798903-duender-project-ender-3-to-corexy-conversion https://irbis3d.xyz/ GitHub:…
Wydruk około 7,47 €–9,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Ender dog (SDcard gcode) without base or if you prefer Niko the puppy without dog house. (see the image, the Creality gcode clearly has the Makerbot imprint there so i refer to the original ) I've attached the gcode (with base) too,…
Wydruk około 3,86 €–4,72 € nettoWstępna wycena jednego wariantu
The best Filament warmer and dryer in one can now be placed on TOP of the Prusa Core One! The cross bar is only if wanted (Hexagon long stick) for more stability, and 5mm will also do in thickness at the back, but I recommend two times…
Wydruk około 1,83 €–2,24 € nettoWstępna wycena jednego wariantu
Mounting a E3D Revo Micro on Creality Ender 3 , CR10 , Sunlu S8 and many more printers. Bowden-Setup and Direct-Extruder with Annex Engineering Sherpa Mini ! Silent Setup with 5015 Blower and 40x40 axial Fans. Detailed build instruction…
Wydruk około 4,02 €–4,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remixed from ‘Creality Ender 3 Pro - Raspberry Pi 2/3/4 + LCD Enclosure’ by eoyilmaz, specifically v042 for Pi 2/3. Note: This remix only works for Pi 2/3 , not 4. When mounting it to the LCD panel, you should use only 3 of the original…
Wydruk około 5,91 €–7,23 € nettoWstępna wycena jednego wariantu
Basically took a Satsana duct for a 5015 fan, modfied it to be able to hold a BLTouch + BMG Direct drive extruder on top, aswell works with most Creality machines, I designed it for a CR10 This version is for the mellow mosquito hotend,…
Wydruk około 7,43 €–9,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Creality single-gear extruders, especially the metal ones, come with a very stiff spring and sometimes can, even on their minimum design (screw all the way loose) and true minimum (cap removed) settings, badly deform softer filament,…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Creality Ender 3 S1 Pro/Plus Filament holder adapter 2-3kg bearings or use without bearings (cylinder name “tubus 2-3kg use without bearings” ) It is designed so that the coil easily unwinds from the holder and does not tend to get stuck.…
Wydruk około 9,53 €–11,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This fits under the filament run-out detector on the CR5. The PTFE tube runs from the dry box and connects to a PC4-M10 connector attached to the feed end. Screw the connector onto the feed end and then use 12mm M3 button head bolts with…
Wydruk około 0,48 €–0,58 € nettoWstępna wycena jednego wariantu
The LED list uses the two Z stepper motors as Attachments. The list are pressed in place around the motors. You need a printer with (X or Y) of at least 340mm to print the list. Use PETG because of the heat from the LED. PLA will…
Wydruk około 1,74 €–2,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
“When using a wireless battery pack, you can plug this into the USB C port on the controller to block the bright LED light when playing in the dark. On my controller, I still get a very dim halo showing under the controller's plastic so I…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
Magnet holder to place on top of 'lid open' safety sensor to enable laser operation with open lid. USE AT YOUR OWN RISK!!!! Printed with transparent PLA to see LED underneath. Use 10mm x 2 mm magnet. Remember to check magnet polarity…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
Soporte para un termómetro/higrómetro comprado en aliexpres muy barato, se ajusta perfectamente en cualquier parte de la barra superior de la impresora creality ender 3 v3 se. es muy útil y practico y no se queda suelto ni nada, encaja a…
Wydruk około 1,71 €–2,09 € nettoWstępna wycena jednego wariantu
Šuplík pro trisky. (Creality ender 3 s1/pro/max).
Wydruk około 2,69 €–3,29 € nettoWstępna wycena jednego wariantu
Creality CR-M4 sprite extruder plate. During shipping of my printer from a friend, the plate got damaged and bent. Since I can't find where to just buy it, I made it taking into consideration the original one. Left space for airflow. Can…
Wydruk około 0,91 €–1,12 € nettoWstępna wycena jednego wariantu
Designed for creality 500x500 honeycomb with rubber corners. This version centers the honeycomb within the mechanical axes, it has four unique feet for the Right Front, Left Front, Right Rear, Left Rear. 500x500mm is larger than the…
Wydruk około 1,54 €–1,88 € nettoWstępna wycena jednego wariantu
Description Creality K1 and other printers. Belt tension meter to adjust belts at same and correct tension. If you print it right, when the needle is in the middle, the belts tension should be at 110hz. Settings: Nozzle: 0.4 Line height:…
I'd recommend printing the full set Print from ABS/ASA/PETG - I don't recommend PLA USE the thinnest LH possible for your printer After install, recalibrate your printer and redo input shaping.
This is my profile for the K1 Max in OrcaSlicer. It contains the printer config, 2 printing profiles and a material profile for the included HyperPLA. Also included are a model for the build plate along with the texture image, see below…
Why you need this: This is a beautiful print in place set of hinges that will enable your door to open completely. The geared hinge is better design choice because the two pivot points can hug the chamfered frame with a tighter profile.…
For people who own this printer, they are familiar with the weak vertical construction. Because of the shaking the printing quality is suffer. So I made this to prevent the problem. After mounting it, the better surface finish was…
Please give it a 💖 if you like it 🥰 Edit 2024-07-28 : Flavor updated Edit 2024-07-13 : Added a “Quality Profile” Added the thumbnails to preview models on the printer 👉 Link to my Ender 3 V3 SE Profile 👉 Link to my Ender 3 V3 Profile 👉 My…
UPDATE: New rear Betweener! Creality K1 Lid Riser. I didn't really care for any of the other lid risers out there. They were frequently huge and had sharp angles that needed supports, so I set out to design a modular lid riser system. It…
Please give it a 💖 if you like it 🥰 Edit 2024-08-31 : The profiles for the K1 “without blower” are compatible with the K1 SE. Edit 2024-08-31 : Made 2 versions for Cura profiles : If you create a new printer as described below use the…
This is the full kit to raise the Creality K1C lid to minimise/ eliminate the issue of cable chain bumping onto the lid when printing at the left edge (when viewing the Creality K1C from the front). It also eliminates the issue of…
Updates 2023-07-26 - Adjusted z-Height of Betweeners, all level with floor now. 2023-07-20 - Rear Betweener Added! Introducing the JC K1 Lid Riser now with hinges! Keep your lid attached and stop having to find a place for it when you get…
Taurus V5 Final Release Part of this release in the display case for Klipper WiFi connected TFT displays, please check it out: https://www.printables.com/model/624504 We're sorry this took so long, but the V5 changes were quite drastic,…
Why might you need this? Following my design of a top-mounted spool holder to allow my Creality K1 Max to print TPU more reliably I received several requests for a similar model to work with the K1 and here it is! This will allow the…
Basic Toolbox – Creality Ender 3 V3 SE This toolbox has been adapted for the basic tools that come with the Creality Ender 3 V3 SE 3D printer model
This riser don't need any screw or other to be fixed. Once the 4 corner installed, put the bar. All will be firmly fixed on the printer Lot of people asked me to create a K1 version. With help of @Smaug_353550 , i made it. /!\ - i don't…
This is a remix of Henlor model available here to support Creality K1 Max. The only thing needed is foam tape, I recommend using 2mm thick and 6mm wide tape.
[5 Dec 2023 short update] Known Issues: A.) This is designed for K1, I don't own K1 max, not sure if it will fit, there are K1 max version 270 hinges done by others also available on Printables. B.) PLA will work, but recommend PETG or…
Disclaimer: Due to duct tips having close vicinity to the nozzle, use at your own risk of failed print depositing globs covering/melting the ducts. Low-profile part-cooling duct for stock Creality Sprite Sprite-Pro extruder 40x40 part…
👉 Link to my Ender 3 V3 KE Profile 👉 Link to my Ender 3 V3 Profile 👉 My other Slicer Profiles & Models Please leave a comment if you have any possible improvements to make to these profiles 😉👍 Print speeds? Benchy : about 32 minutes…
My custom designed lid raiser for the Creality K1 Max. I wanted a simple version which required no additional components but allowed me to open and close the vents on the fly. Lid raisers for the K1 Max help improve the clearance between…
Tool tray for mounting around the left front rubber foot of the printer (48mm). Pull the handle to rotate the tray for easy access. Designed to hold all K1/K1C tools that came with the printer (except glue and grease). external height…
PTFE Guide for K1 extruder No supports needed. Improves filament guidance to the extruder Other mods for Creality K1 You can buy me a coffee with a donation. Me puedes invitar a un café haciendo una donación Click to danate
Please give it a 💖 if you like it 🥰 Edit 2024-08-29 : Import error of the Ender 3 V3 Plus for Cura solved Edit 2024-07-28 : Added a “Quality Profile” Added the Ender 3 V3 Plus 👉 Link to my Ender 3 V3 KE Profile 👉 Link to my Ender 3 V3 SE…
I love the design of the Creality K1 printers. The unibody frame with the beveled edges and corners is just awesome. There are already a lot of risers for this printer out there, but this one extends the original frame of the K1 / K1C.…
Hello everyone. This is another take on mounting both the spool holder and filament sensor on the side of the Creality K1. To assemble the sensor and PFTE fitting on the bracket the stock screws can be used. Do not tighten them too mutch.…
This plate allows you to mount the Filament runout sensor on the right hand side of the Creality K1 making it easier to use a filament roll on the side of the printer instead of the rear. This plate uses the two screws that secure the…
NO software modification are required if you have a K1C Just print, glue up the original silicone brush and screw the bracket in place reusing the 2 carriage screws. Now you can use whatever plate you want. I have included a brush mold…
Why might you need this? I designed this top-mounted spool holder to allow my Creality K1 Max to print TPU more reliably. This allows the filament to be fed directly to the extruder, thus removing the friction that occurs when feeding via…
This is a riser for the Creality K1, inspired by the speed and noise of the K1, I decided to call it Nu-K. The riser is printer upright and with tree support for the grids. The grids for the ventilation are with M3 screws and 12mm large.…
UPDATE: Added 1.1 and 1.2mm shims UPDATE: New version with markings. It doesn't require to destroy the top level of bed to install, like some modifications i've seen before. It's designed, so you can put it from the side and rotate into…
This mount is designed to hold the cable from the Creality Sprite Extruder Pro kit. The model referenced in the documentation fit poorly, had sharp edges, and looked bad. This design is cleaner and fits better, while holding the cable…
Update: Added a new version that is compatible with both the K1 and K1 max. The cooling performance is unchanged and the old versions are still there if you prefer those. The changes are: Updated appearance - Like me, it looks better in…
FIND ALL MY DESIGNS HERE : https://cults3d.com/en/users/Zuff/creations Do you like my work? Can you support me with a ☕ or maybe a 🍺? It all depends on the time 😄 --- Model widened on several sides. More rounded corners to better…
I was looking for a silencer and a protective grille for my K1 side fan. There is a wide range on offer here, but any grille in the airflow can increase or decrease the noise. As I didn't want to test everything, I constructed my own. My…
If you like my work, don't hesitate to support me by paying me a ☕. Thank you 🙂 https://ko-fi.com/vinis
This guide holds the filament tube vertical as it enters the top of the extruder. It is a remix of a design by Way2Do. I strongly suggest adding a riser to your printer to provide extra clearance above the extruder. I had to replace the…
This is a poop chute for the K2 Plus that I've designed. It attaches with the two screws on either side of the waste chute. There's also an additional retainer bracket that utilizes (2) of the rear panel screws and it supports the end of…
I redesigned the handle to be more in line with the rest of the printer look. I centered it on the height of the door unlike the original which is centered on the height minus the cutout for the screen. I also added a version where you…
This mod allows you to use a side spool holder or print directly from a filament dryer, even from the back or side of the printer. There is no need to change the filament sensor cable or make any other mechanical changes. You will need…
This upgrade goal is the prevent the tensioner form tilting by containing it more on the Z and X axes. This will prevent the belt to wear unevenly and increase its life spend. Recommended Print Settings : Material : ASA/ABS Nozzle : 0.4…
Update 01/07/24 (07/01/24 for the rest of the world): “Wrench” model fixed to have looser tolerances so that there isn't any issues fitting over the knobs. K1 Max SCREWS_TILT_CALCULATE config added, screw locations courtesy of…
The camera on my k1c was not perfectly centered so I redesigned the bracket with an angle of 10 degrees. It replaces the original one, just unmount the whole camera (1 screw) disassembly and replace the original bracket with printed one…
Description: Creality K1 XY axes alignment tool. Update: Added alignment tools for K1 Max. It will help keeping the axes perpendicular while adjusting the belts. Also it will keep the X gantry at 150mm from front pulleys so you can adjust…
Hexagon plates for K1/K1C Unibody Riser Frame . It is a two parts print that should be gluwed together. The plate has clips so you do not need to glue it onto the Unibody Ricer frame. Update 2024-09-28 : I made it easier for you to create…
**SPECIAL NOTE: I've installed this only on my printer, if your printer is different, let me know and I will see if I can find a way to help. Watch the video, if you're just looking for the install, skip to that part. Print from…
The stock part cooling fan and duct only cool the part from one side. This is my take on part cooling fan duct that directs air from three sides. I printed mine out of Prusament ASA. I print flat with tree supports 06/12/2023 Update:…
Desiccant box for the K2 Plus CFS system with optional custom lid which snaps into place like the original. If you prefer the original, it's compatible. Print in provided orientation, no supports needed. Turned out great with Creality…
One of the biggest annoying issues with the Creality K1 is the sagging cable chain. Several people have already proposed different solutions, but so far no one has tried to correct the chain itself, which is the source of the problem. But…
Tool tray for mounting around the left front rubber foot of the printer (48mm). Pull the handle to rotate the tray for easy access. Designed to hold all K1/K1C tools that came with the printer (except glue and grease), plus room for the…
Update V2 +V3! You can get the new version with alot of improvements on Cults. https://cults3d.com/en/3d-model/various/creality-ender-3-v2-fan-cover-duct cheers! THE FREE MODEL YOU CAN DOWNLOAD HERE MIGHT NOT FIT SINCE IT WAS A FIRST TEST…
This desiccant container fits inside the Creality Space Pi (single-spool) filament dryer. It is designed for standard 3-5mm silica beads, but it can also be filled with silica desiccant packets. If you are looking for a double-spool…
Build plate models and textures to customise the bed plate in your slicer. ❤ Enjoy this model? Your support means the world to me! If you love what I do, remember to like and rate the model. You can also follow me to get the latest…
Y'all know that FDM printers are not ideal for printing minis but hey, it's possible, and you can get pretty damn good prints if you tune it correctly. Main things I've noticed made a difference were : Layer Height, of course The printing…
This is a quick-to-print guard for the Creality K1's side fan, a 120mm radial fan that blows a massive amount of cooling onto the print. Someone complained of having their failed part fall into and break the fan, which inspired me to…
This will hopefully, one day be a complete model of the Creality Ender 3 S1 printer. It is currently still a work in progress. I modeled everything off of my own Ender 3 S1, so I cannot guarantee that yours will be identical. Please note…
My configuration for PrusaSlicer. I will gradually edit the profiles. Printer: Creality Ender-3 V3 KE Print Setting: 0.10mm and 0.2mm | SLOW, NORMAL and SPEED Filament: PLA, PETG, TPU (SPEED has disable auto cooling) 🆕 for all nozzles on…
Air duct for the rear fan of the Creality K1 printer. Protects the fan from damage and takes air closer to the print head. Attaches with standard screws. Prints without supports. The model has been replaced by a version with a reduced…
Creality Sonic Pad top mount for Ender3 S1 or S1 Pro (it could fit other printers too, feel free to remix if needed). It still allows the screen to be tilted for you to have it properly in front of you. Depending on your installation you…
Lid raisers for the K1 Max help improve the clearance between the drag chain / filament tube and the glass top as Creality have designed it very very tight. The vents allow you to help prevent the temperature becoming too high inside the…
I recently came across another Creality owner that had noticed his gantry was off axis, this will off course cause some serious layer shifting on bigger prints. Upon checking myself (I used the PEI sheet that comes along with the printer…
Advantages : Better support for the foot extension. Foot extension will never fall off again. You will never lose the foot screw. 2 versions : with or without the bottom panel Recommended Print Settings : Nozzle : 0.4 Layer height : 0.2…
Recommended slicer settings: Layer height: 0.1 Initial Layer height: 0.1 Infill: 100% Print material: Preferably ABS+ or ASA, although I've printed it using PLA and it's holding up well. Tutorial: A good tutorial on how to use the shims…
Creality K1 Assembly CAD model (non-official - reversed engineered) This model is a work in progress. It's still containing some inaccuracies and is missing some features. I don't recommend to print any part of this model as is. They are…
A print in place rotating clip for the K1 series bowden tube, easy to print, easy to use.
Prusa Slicer Profiles for Creality K1 and K1 max The model is just there, cause I needed one to upload the Profiles. Can ignore it. There are two config files. load both Included : - PLA high flow Material Profile (Custom Gcode Added for…
This is the filament runout detection roller guide for the Creality Ender 3 S1 printer as seen in the following video: What you will need: ► QTY (1): M4 socket head screw, anywhere from 6-10mm long will work ► QTY (1): M3 brass heated…
I have been having trouble printing TPU filament properly with K1 Max. TPU filament is soft and sticky, which causes filament feeding flow to be inconsistent. Building upon the “ Creality K1 Max Riser ", I made a spool holder that feeds…
What is this? mini Satsana is a remixed version of the very popular Satsana fan duct, which aims to reduce unnecessary weight and size. No supports are required, and there's clearance for the Micro Swiss Direct Drive kit. Print settings…
A poop chute for the K2 Plus for those of us with rear access to the printer. Included a little basket because my wife wanted her Christmas container back. Designed to be printed without supports and using the standard screws that are…
Hinges option for Creality K1 / K1C Unibody Riser https://www.printables.com/model/891616-creality-k1-k1c-unibody-riser Uodate 2024-10-20: Redesigned hinges for new version of the frame. Update 2023-07-14: I have updated this model.…
This is just like the glue stick holder for the k1 but this holds the clippers and the spatula on the back and has the same indent for double sided tape. needs supports.
Tray mounts around left front rubber foot of printer. Pull handle to rotate tray to gain access. Setup to hold all K1 Max tools that came with printer.
K1 Riser to prevent the reverse Bowden tube from scraping on the cover. I made 2 versions, short version with open vents; some users prefer this for PLA printing. Enclosed version for printing ABS / ASA For the short version, you will…
See video above for installation on the Ender 3 V3 KE, the same method can be used to install on the Ender 3 V3 SE. Replace your top mount spool holder with this PTFE tube guide to remove the heavy spool from the top of your frame which…
This desiccant container fits inside the Creality Space Pi Plus (double-spool) filament dryer. It is designed for standard 3-5mm silica beads, but it can also be filled with silica desiccant packets. If you are looking for a single-spool…
Designed this for my Creality Ender 2 pro. It can be printed on every printer. Update 12.12.2022: New version V2 with engraved L/R added. Check out the other ender2pro upgrades I have designed! Cover, Creality Ender 2 pro by eSeL |…
Drawers mounted on the underside of Creality K1. It consists of a front drawer and a right-side drawer, and does not block the ventilation at the bottom.
Is the cable chain dragging across the rods of the K1 Max. This simple add-on will raise the cable up about 5 mm. Simply remove the screw from the extruder, add the part and screw it down with a M3x20 screw. Needed: M3x20 screw Note: It…
The Latest D3vil Burner for Knomi V2 !! Introduction D3vil Design Burner for Knomi V2 , this model is made with lower colling ducts ( i will try to update it with a higher version later. Features - Drop in replacement for the Creality K1…
These are the files provided on the storage that comes with Sonic Pad. In case you deleted them or if you want to print the bracket that matches your printer before you receive it. Edit: I've added more file available from Creality…
