2859 modeli
A NEW VERSION OF THE CASE A V2 is Available HERE : https://www.printables.com/model/1120097-flipper-zero-case-v2 SnapBumber for WifiModule : https://www.printables.com/model/392270-flipper-wifimodule-snap-bumper-v10 i'm learning 3d…
Universal pen adapter for the Cricut maker 3. Includes pen distance tool. works with anything up to the thickness of a sharpie. Pen distance tool rest/snaps on to the rail allowing you set a 3mm distance.
Resized to fit the Sylvania family bunnies this sofa chair prints well, looks soft, and adds a ‘lived in’ look.
Das ist ein Halter für die Matten von meinem Plotter. In der Mitte befindet sich ein Loch um es mit einer Schraube zu befestigen. Ich habe das PLA+ mit 205 Grad und 65 Grad gedruckt. Die Ecken sind abgerundet und passen sich super an.
Small scribing block with most common heights for woodworking. 9 - 12 - 15 - 18 - 19 - 22 mm Three models: 7,5 with “springs” inside for better hold pencil 7,5 - 9,5 simple straight holes STEP file included, to make you own custom block.…
Hey there! After I noticed release of the contest, “Contour Duplication Tools” was released, I spent a few days creating a simple, yet effective design. I present to you a very simple, customizable, fully 3D printed compass & wood…
Ornament hanger for cristmastree
Noisy Cricket From Men in Black.
A small crib that was designed to hold KUMATY bears but can be scaled to needed size Organic supports work well if you don't support the begs of the bed, my setings are in the 3mf file.
Cristiano Ronaldo Portugal National Team.
A quickly made holder to store Cricut cutting mats under a table surface. Holds the standard sized 36mm x 33mm mats. I'm sure there is room for improvement (especially the centre joint), so included the STEP files for you to play with.…
Needed to write with a pilot G2 instead of the Cricut Pens. Hope this comes in handy for someone. You need to cut the grip off for it to fit.
Un organizador con cajones para mantener un poco mas ordenado tu escritorio
A table with chairs for ‘critters’ with tails. Our dollhouse is inhabited by Sylvania Family-sized bunnies and this set was built for them. Around a 1:16 scale, the chairs print with minimal supports. The design allows the critters to sit…
The Crimson Firehawk appears prominently in Star Wars: Young Jedi Adventures . This model has versions for its appearances in Season 1 and 2. On the Season 2 version, the engines can rotate, the wings can fold up and down, and the nozzles…
Pretty basic adapter to fit Posca pens in the cricut pen holders.
I didn't want to use the screw that the original mount requires. My crib wall is ~19mm thick so I cut small chunk out of the original model such that the gap was ~20mm. While it makes the model less versatile, it is a little more…
This is a Hollow Knight wall art piece. Any printer that can read M600 gcode commands can read my provided gcode file. NO MULTI-COLOR PRINTER REQUIRED, the different colors are at different heights, making it so any printer can print this…
Organizador de escritorio
This is a small numbered tag that can be used as indicators for various things, for example key rings or marking transitions in knitting. I originally printed as all black in PETG (since they were going to be used in yarn dyeing and need…
Disposable Grip designed to fit the CRITICAL TORQUE PEN MACHINE . See article below for sanitization recommendations: https://help.prusa3d.com/article/prusa-face-shield-disinfection_125457 Recommended Print Settings: PETG 0.2mm layers 3…
This mHct microhematocrit carrier is designed to hold 75mm capillary tubes for use in a centrifuge accommodating standard 15mL tubes. It's an improvement on the design included with the USA E8 Combination Centrifuge (whose original…
Mountable vinyl roll holder that was designed for our Cricut Maker 3 vinyl rolls
Luthen Rael Monologue : What do I Sacrifice : Andor : Starwars Use Monoraelfixg.ojb or .3mf. Ill update the gcode as soon as more eye find faults with how the letters got garbled when I Decimated it.
I wanted to make a quick disconnect cable for my MK4 in the original enclosure, but since the ribbon cable comes pre-split from Prusa making my own seemed like a good idea with some more standard IDC connectors at the midpoint. Micromatch…
I purchased the tool for my xLDC Quick Release to make it easier to crimp the ribbon cables. This is because more connectors have to be crimped with the xLCD than with the quick release of the MK3S+. You need a quick release if you want…
This is a "lock" which means you can tell at a glance (just poke your head in the room) if the cage doors are completely closed. It's for piece of mind since otherwise to know the cage is fully closed you must physically tug on each door,…
cercavo un porta tubetti per i miei acrilici di the army painter, il modello originale non mi lasciava vedere le etichette dei colori
Kufic Script Serving Tray or Plate *Roughly translates to “Eat More Peaches” *No it does not. I have no idea what it says… so if you know how to read Arabic Kufic then please let me know if it is NOT COOL. For those interested this…
IMPORTANT UPDATE There is a newer version of the phone mount for VanMoof, which includes cradles for multiple phones and will be updated in the future. This version here will not see any updates in the future. You can find the newer…
The Noisy Cricket (Mini Gaming Keyboard) A minimal keyboard with just the basic keys for gaming on the go. Mostly targeted at FPS games with a focus on W A S D . The layout can be customized via the QMK firmware. The default layout looks…
I designed this secrid wallet case after I lost my secrid wallet abroad and luckily found it again between the seat of the car. Print this with support as in the picture and I recommend to use PETG. The case fits exactly so it won't come…
This is a scale replica of a cricket bat. Can be used in outdoor cricket games, although it will break if you use it with a real ball. Recommended use with plastic ball. Print with detail, and sanding and paint are recommended for a…
Feineinstellung für Lee Matrizen Ich verwende sie in der Hornady mit Schnellwechselsystem. So kann die Einstellung einfach und genau vorgenommen werden. Beim Drehknopf einfach einen 3mm O-Ring mit einlegen damit eine Klemmung stattfindet.…
I would recommend printing on the flat face, with organic supports.
I love the Kalita Wave 155 dripper for pour-over coffee, but I want to use commonly available basket filters, like these for instance. This little tool will re-shape a larger filter to fit correctly inside the dripper. Print directions |…
So why is this supposed to be a tool? You can't do anything with it or can you? You can. Imagine this: A: “Have you repaired the lawn mower?” B: “No, I haven't got around to it.” A: “You haven't got a round TUIT you say?” B: “Yeah.” A:…
A Treelight Repair from a Missing Bell on a lightstrip There is a Fast Raff only 2 layers at 40mm/sek under to stabelise the Translucent prints at 11min while the Gold is at 7min with 150% speed linewidth is ,6mm and layer at 0,3mm
Easy to print. Glue it on the wall or you may drill holes into it and use some screws.
Easy to print. Glue it on the wall or you may drill holes into it and use some screws.
Inscription: LOVE (two colours) 20 cm, 10 cm, 5 cm, pendant
Improvements in the 3D Cricket Key Design: Advanced Bit Locking : Instead of the bit passing through the wheel, I have redesigned the wheel with a wider central space and a separator. This allows the bit to snugly fit and lock from both…
Well... added a hole for my convenience I post my file it can help someone else
Easy to print. Glue it on the wall or you may drill holes into it and use some screws.
The latest preliminary Prusa Slicer release 2.6 allows you to add embossed and engraved text to your entity. So you place your telephone number and the dogs name on the front and back of the tag in the slicer. The slicer also allows you…
This is a mount for holding a Molex Hand Crimp Tool on the IKEA Skadis board. It uses the Skadis T-Nuts mounting system from 6d6178 . You will need two nuts and the M2.5 hardware to attach them. I use M2.5x16 screws. No supports are…
Easy to print. Glue it on the wall or you may drill holes into it and use some screws.
A stack of prisms where the circumradius of each is the inradius of the prism below it. Prism heights are all the same.
Permet le rangement des couvercles de casseroles de marque Cristel, mais certainement d'autres aussi. Diamètre 20cm et 16cm Se fixe sur l'intérieur de la porte de l'élément de cuisine. Je joins le fichier Fusion pour qui voudrait…
I couldn't find these for sale online, and the existing nubs we had on our saw were all chewed up. Modeled after one of the pieces that came with the saw. 2 types of files available, one as a single piece and one with 9 on the printer bed…
Easy to print. Glue it on the wall or you may drill holes into it and use some screws.
really cool!! edit it for yourself and just like and download the model for prusameters, i have 1500 so i need some more to get a 3-d printer lol…
As the Xmas nears all the Time things go missing or Broken so i decided to start to repair EVEN translucent Glass like things as here the LED-Defusor of a Christmas Star Top so it looks great as from 1m as you normally look at your tree…
A tower of prisms where the circumradius of each is the inradius of the prism below it. Prism heights are equal to the edges of the decagon at the bottom.
um pequeno recipiente que da para peneirar o bicho da mosca pra limpar par pescar
100x160mm sign, reading “No Crime, 8a to 6p” with art of a chalk outline of a victim. Inspired by a popular meme . Best with color switch above 1mm, as with included gcode file. Also see the Shadowbox Frames , into which this and the rest…
With my Ender 5 i had the problem, that retracting a lot on one spot of the filament, led to grinding down the filament or rolling it flat, which results in a failed print, because the extruder can't extrude filament anymore. If you have…
I built this to keep track of my daily meds, but it also got put to work holding all the spare fasteners that I had left over after building my Prusa MK4, MMU3 and the Prusa enclosure (and stuff in the spare parts kit too). Each unit has…
Mollette pour vanne de cric
replace of one part which we lost.
Hey, wall hoes with lettering field were urgently needed in our company because otherwise we are looking for the keys. printed with a 0.4mm nozzle on 0.20 structural with organic supports Have fun Hey, Wandhacken mit Beschriftungsfeld war…
100x160mm sign. Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my signs.
Now also Avaidable as Damascus Steel and Slaughter . Crimson Web version of the Butterfly from Counter-Strike. To assemble it, you have to glue the ornaments on the Handle, or print the multi material version. The separator and the pin…
Tool organizer for Cricut Maker Print instructions Tool organizer for Cricut Maker. Store your cutting tips inside your Cricut Maker. Printed in silk pink PLA. There is also a split version of the model for printers with smaller beds. No…
All of us have at least once seen our towel flying because of the wind, well with these clips the beach towel will remain where you left it, I hope you like the idea and the design inspired by waypoints, the design is designed to be as…
This is an insert for the Cricut Maker tray that helps you organize your tools.
NEW DESIGN: https://www.printables.com/model/264994-brembo-brake-disc-v2 Just a Brembo Brake design. It had textures too but Fusion didn't let me export the textured file. Please comment if you have printed it and let me know for any…
U-scribe jig set for for all common thicknesses. Metric: 12 - 14 - 16 - 18 - 19 - 20 - 22 - 24 Inch: 1/2 - 5/8 - 11/16 - 3/4 Added STP file for your own customization ! 10.9.2024 Added 19mm on demand.
Had to print using 2mm raft to stick on build plate. Print with thicker side of the model upward shown in photo, no supports needed. May require some strands to be cleaned up when done printing. You can find adapters on Amazon but why not…
Prints PETG in 0.2mm layer height with no supports, a 5mm brim around adapter helps with bed adhesion. This is suitable for use with Sharpie fine point pens. Print upright with thin part of the adapter touching the build plate. No…
Mat Extension for the Cricut Explore Air 2 which can be disassembled and stashed in the right hand drawer. The handle itself should be rotated by 90° up when inserting it into the door recess and then by 90° down again so that it sticks…
Updates 2020-01-01: Several people have asked for smaller versions of this which will fit on slightly smaller print beds. I have uploaded two additional "mid size" versions. One has no cup on the end, the other has one less tool slot. The…
I designed this to fit onto the door of my wifes Cricut maker so the mat doesnt flex when moving in and out. This is designed for the 12x12" mat, but i also have a design for the 12x24" mat also. i printed mine with split colours so its…
A sample of my upcoming paid pack of climbing holds There are 8 sample holds for you to try which has been brought to you by my generous holiday spirit :) Sample Crimp 1 A medium size crimp with a moderate amount of incut but a small edge…
This is an extension to clip onto the front of the Cricut Maker to add support for the longer 24" mat. Category: Parts
Imagen de representación de Jesús en la cruz. Image representation of Jesus on the cross
I had a novel idea - a font composed entirely of 45-degree angles at maximum. This led to the birth of NoBridgeScript, currently in its first draft. I foresee numerous tweaks and refinements ahead, but the vision is clear: a font where…
I made the design myself in Fusion 360 and sent to print yesterday afternoon. 4 hours in PLA+. And it prints in place with the hinge and it worked great! It's great for burritos, pizza, breakfast sandwiches, ham and cheese melts,…
Keinen Bock slebst zu drucken? Kauf ihn hier in PETG! - bei Etsy….
Prints PETG in 0.2mm layer height with no supports, a 5mm brim around adapter helps with bed adhesion. This is suitable for use with Stabilo 0.4mm fine pens. Print upright with thin part of the adapter touching the build plate. No…
Celebrate one of football’s greatest icons with this smooth, stylized bust of Cristiano Ronaldo. Designed with clean contours and simplified detail for optimal 3D printing, this piece captures Ronaldo’s signature look — sharp jawline,…
Needed a way to hold the small Cricut vinyl rolls. Expand as big as needed.
I've redesigned this model and release it exclusively on MakerWorld: https://makerworld.com/en/models/207490-ams-wall-mounts-v2-0-fits-all-ams-versions#profileId-227597 This design is heavily inspired by the Wallmount for Bambu AMS model…
This folding cribbage board houses a standard deck of cards and has a compartment to hold pegs. Print with 0.2mm layer height. Add color changes as needed, and add a pause to insert the magnets. Any material will do - I used PETG so it…
Jiminy Cricket, the Walt Disney version of the "Talking Cricket", a fictional character created by Italian writer Carlo Collodi for his 1883 children's book The Adventures of Pinocchio. Jiminy was originally an unnamed, minor character in…
Printed with Flsun Q5, 0.4 nozzle, 0.2mm layer height, 4 perimeters So have fun printing and please leave a like!
Printed it upside-down for a good top finish. Had to use supports and do quite some sanding for the bracket to be smooth. Recommending PLA as it is easy to post-process.
iCiao a tutti! Data l'ultima challenge sul modello delle Air Jordan ho pensato di creare una lampada remix. Ecco poche semplice istruzioni per montarlo. STEP 0. Cosa ci serve??? Innanzitutto direi di partire da tutto l'occorrente per…
Update 2026 : Added v2 mount with minor fixes Update 2024 : Added M12 screw with hex head ---------------------------- I've designed this support for Tapo camera C200 / C210 / C220 to be mounted on various baby cribs. Print specs: 0.2…
This is based on the official Cricut scraping tool, however I didn't like the design so I made something more fitting for a guy. The edge is chamfered to ensure that it touches the surface evenly. The size of the model is 3.5"L x 3.5"H,…
I've messed around with a new cad/modelling software and just ended up with a pistol somehow… Hardware needed: A bit of 4mm bungee and maybe some tape for the bungee where it interfaces with the lever to avoid too much flex Assembly, put…
My wife asked me for an organizer for all of her Cricut tools. So I made this in Tinkercad and then cleaned it up a little in Blender. V1 is the original file from Tinkercad V2 is after cleaned it up and beveled the edges in Blender.…
Some time ago I printed a box for crimping tool and ferrules - functional, but rather simple. However, I wanted something more stable and so I turned the idea into a case based on the Frog Box v2.0 . The box has a compartment for the…
I adapted Heleplanchiste's Trayextension to make a roll holder for Cricut Smart Vinyl. It is printed in two parts - left side and right side. If you flip the model onto its end, it can be printed without supports. Printed in PLA at .20…
This is a simple Volkswagen Script Badge. Usually seen on old VW bugs. In comes in quite small on the print bed. I traced it off of an image. The cover image is an example of what it could become. You will need to scale it up by 5x to…
Added Three Layer STL's of each letter which can be joined in slicer or Tinkercad - the UPPER CASE letters are in a separate post There are two(2) postings of this font face: Lower Case - Letters that can be attached 2. Cap Letters to be…
These include a taper that fits best with 1/8" (3.175mm) holes. Print multiple slowly with flat faces down and good cooling for best results.
Hi everyone! This is my first published model and it is a V1. My wife wanted something to hold her cups and tumblers while applying vinyl or etching. There are some commercial options but they are expensive and then the other 3D models I…
![Phone Mount for VanMoof S2/S3 [Legacy, newer version linked in description]](https://media.printables.com/media/prints/41892/images/418608_27bb6a0e-767c-4f68-becf-206b6da75dc2/vanmoof_s2_smartphone_mount_2020-oct-02_09-28-49a.png)
