Liczymy pasujące modele…
WASD, Shift, Ctrl keycaps with hexagon tops print with the top of the keys facing up use supports on the bottom of the keys
Wydruk około 2,52 €–3,08 € nettoWstępna wycena jednego wariantu
Part of the 5 O’Clock Buddies Series Something goes wrong. You panic. And without thinking, your hand moves— CTRL+Z. But this time… it didn’t work. Just a routine cleanup. Until the file was Human_DNA_Final_V3.sys. And the cosmos started…
Wydruk około 2,17 €–2,65 € nettoWstępna wycena jednego wariantu
CTRL Keycap for Corsair STRAFE mechanical keyboard . My wife's CTRL key busted after playing too hard, so I made this using the Parametric Mechanical Keycap Library . There are two versions. The rounded version has a round mount similar…
Lässt sich mit der Picatinny-Halterung nach unten mit etwas Support einwandfrei drucken. Update 14.02.2024: Der Griff ist als Anbau an eine Adderini zu schwach. Beim Spannen der Adderini über den Griff ist die Picatinny Aufnahme des…
Dustcover for the winwing URSA MINOR 32 Throttle Metal, 32 PAC Metal and 32 AGP Metal. Printed in TPU 95A to avoid scratches
I remade and printed my control button cause it broke, it turned out pretty good. Print Settings Printer: Ender 5 Rafts: No Supports: Yes Resolution: .16 Infill: 100% Filament: Generic PLA Black Notes: Print with supports as shown in…
Romer G “CTRL” keycap with strong clip. It does not use the standard Romer G switch clips instead it uses the empty space inside the switch to attach. Text could be added in slicer directly.
You can purchase the Board at: https://www.nodo-shop.nl/en/our-products/228-espac-wifi-mitsubishi-heavy-industries-interface.html
Screen cover for the Winwing / WINCTRL MCDU – protects the display from scratches, dust, and sunlight. Designed for a perfect fit with secure hold and easy installation. Printed in flexible TPU with a hardness of 95A. Do not use PETG or…
This is a reupload of my older model, which i did because it went way further than being only a Logitech G13 derivate. This is a HOTAS (hands on throttle and stick) setup, which i completely designed from scratch in Fusion 360, over the…
This is a modified version of the quest 3 elite strap cable clip, intended for pointCTRL users: a second hole is built in the clip so that the USB cord of the pointCTRL HMS finds its way through the clip.
This A320 Glarewing is designed to be connected to the Winwing/WinCtrl EFIS-L and programmed with Mobiflight. When attaching to the EFIS-L, the bottom left screw of the EFIS can be removed, but the top must stay connected (There is a…
Printed upside down with supports with an Ender 3 on super quality settings. Replacement key for low profile ctrl. Category: 3D Printing
screen cover for the Winwing / WINCTRL PFP 3N – protects the display from scratches, dust, and sunlight. Designed for a perfect fit with secure hold and easy installation. Printed in flexible TPU with a hardness of 95A. Do not use PETG or…
Since we have cats that like to play with small cables, I designed this cable cover that can simply be clipped onto the sides of the 32 PAC Metal. It effectively protects the small connection cable. There are two versions: because I…
This is a modified cable clip for the Hp Reverb G2 VR headset, specifically designed for PointCTRL users. It's a remix from https://www.thingiverse.com/thing:4723188 and inspired by https://www.thingiverse.com/thing:4886190 . While…
improved version LED light shines through
Inspirational sign. I saw this saying on sticker and thought I would recreate it. Color change can be done by pausing at the various layer heights built into the model.
Winwing / WINCTRL Mounting Bracket Stand for PAP3, FCU / Tab A9+ or other 11″ Tablets – 3D Printable Model This 3D-printed mounting bracket is designed to hold two 11″ tablets - such as the Samsung Galaxy Tab A9+ shown in the images -…
This keycap is designed to fit on the right control of the corsair k65 rgb mini. And to be printed on a multi material printer. It might fit other keyboards, i dunno. In printables, right click the object and split to parts and assign…
Remixed from https://www.thingiverse.com/thing:2766924 I just scaled the width by 1.38 to get the CTRL key width. Fits perfectly. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 **Rafts:** Doesn't Matter Supports: No **Filament:**…
DIY Controller for any shortcut (MIDI, DMX, Photoshop, Premiere, Keyboard, etc). It's designed to hold an Arduino Pro Micro and one rotary encoder. [PT] Controle para qualquer atalho (MIDI, DMX, Photoshop, Premiere, teclado, etc). Foi…
This is the stand alone CTRLDock Classic enclosure to use with the Heber CTRLDock classic gaming and retro controller DE9 and DA15 - for example Amiga/Atari and NeoGeo style control joysticks and pads.
2CH Relay DIN Rail Mount v3 for auto-ctrl.com 3v Relay v2
DIY Controller for any shortcut (MIDI, DMX, Photoshop, Premiere, Keyboard, etc). It's designed to hold an Arduino Pro Micro, one 10k rotary pot and one 10k slider pot. [PT] Controle para qualquer atalho (MIDI, DMX, Photoshop, Premiere,…
El imán se añade durante la impresión, haciendo una pausa o cambio de filamento, para que quede integrado. Se puede echar un poco pegamento para asegurar que no se mueva.
Love my BunkerKings CTRL loader for paintball, but spacing between the button on the shell and the board made it harder to press. I designed this small spacer to fit inside the shell membrane and it activates the board power much easier.
I love my DROP ALT keyboard, but i found it a tad too flat, so i designed a pair of feet that raises and inclines it a bit more. They reuse the screws and magnets of the original feet from the DROP ALT keyboard model MDX-22176, and the…
Nodo-Shop ESPAC MHI-AC-Ctrl Case with improved cover holding.
I bought the PDC panel for my Boeing PAP3, and while mounting it, I noticed that the entire panel tips forward after installation. To fix this, I designed these small extensions for the original Winwing feet. The panels simply clip onto…
This is the stand alone Super CTRLDock enclosure to use with the Heber Super CTRLDock gaming and retro controller classic Nintendo (NES & SNES) gamepads, sticks, mouse and multitap interfaces. Further details can be found here along with…
I made this tall stand so that a 10" screen can fit underneath showing my gauges that I pull out from MSFS 2024. Category: Hobby
a version for people using the Winwing/ WinCTRL throttle mount (like myself)
Wanna show off that you are a digital maker? This cute ctrl z pin is a perfect way to add some spice to your backpack!
Caps for 10k potentiometers. [PT] Botões para potenciometros de 10k. Print Settings Printer Brand: Anycubic Printer: Kossel Rafts: No Supports: No Resolution: 0.2mm Infill: 18% Filament: Material 3D PLA Any Category: Gadgets
These files were created and distributed by WinCtrl over on Github, I am simply posting them here with a detailed BOM and notes from my experience alongside the step files being exported separately from the original file. Text from the…
a dustover for the WINWING / WINCTRL URSA MINOR THROTTLE METAL, that utilizes the "screw(holes)" on the engine panel. Also easy to remove Printed in: 60% infill, grid, fast (0.3mm) Disclaimer: It maybe wont work with your printer, since…
DIY Controller for any shortcut (MIDI, DMX, Photoshop, Premiere, Keyboard, etc). It's designed to hold an Arduino Pro Micro and one rotary encoder. [PT] Controle para qualquer atalho (MIDI, DMX, Photoshop, Premiere, teclado, etc). Foi…
UPDATE 8-11-2023: Uploaded a few slightly different STLs. One with RAISED Lettering and on with connections to keep the inside of the P's, A's, and D's on the prints. work at a public computer lab. I put these up in front of the computers…
/////////////////////////////////////// ENGLISH /////////////////////////////////////// Most important keys for decorate geek room/office/desk. Easy print without supports. Contrast letters was painted by permanent fix.…
CTRL SHIFT EJECT It looks like an ordinary shifter knob for the Thrustmaster TH8S, complete with a 7-speed shift pattern on top. Flip open the lid and you'll find a big red button. It's a battery-powered Bluetooth keyboard key, so it can…
This shroud slides over the CTRL-AX Ultrasonic cutter and provides storage space for the included torque wrench as well as the spare blades and screws. IMPORTANT: print the test shroud first! It's supposed to be flush with the top surface…
Replacement magnetic foot/stabilizers for Drop CTRL/SHIFT/ALT keyboards. Use super glue to stick D5x2 or D5x3 round magnets into the slots. Examples: https://us.store.bambulab.com/products/round-magnet?id=42424856346760…
The quest 3 is a quite compact VR device, especially for those coming from a Reverb G2 like me. For those who use it to fly in DCS World with pointCTRL (the infrared finger mouse system - https://pointctrl.com/pointctrl-kits-2/ ), it can…
This is a modified version of Mark Ayton’s excellent EFIS Knob. The back has been lengthened to make the knob easier to rotate. The mounting hole on the bottom has also been resized to fit the Engine Mode Selector post on the throttle…
I wanted my keyboard to be even more low profile, so i replaced the light diffuser and bottom case with a 3D printed version. Might fit on the high profile case but haven't checked since i dont own one. Covers the entire lower bottom of…
These panels are an evolution of my other A320 button box but sized for WinCtrl pedestal products and used with Mobiflight. I found that when printing the text with the Prusa XL, its have the text be printed before the rest of the layer…
MHI AC CTRL ATOM S3 Version Two versions back plates. One for connector on the back soldered One for connector on the front soldered More information this github link: fonske/MHI-AC-Ctrl-ESPHome at atom
My magnet popped out of my load and I lost it. I made this as a replacement to the magnet. This print uses the threads built into the loader. I have used this part the whole summer and it never once broke. I used PETG with the default…
RP2040-ZERO Keyboard (CTRL+C+V) Copy-Paste #include <Keyboard.h> #define SW1 3 // Кнопка CTRL #define SW2 1 // Кнопка C #define SW3 2 // Кнопка V void setup() { pinMode(SW1, INPUT_PULLDOWN); pinMode(SW2, INPUT_PULLDOWN); pinMode(SW3,…
Two part bracket to attach the Miniflight MiniFCU and MiniEFIS to the Honeycomb Bravo. You'll require: Two M3x25 bolts and nuts, to attach the two parts. Four M4x8 to attach the bracket to the Miniflight parts Also Added a Second Support…
This support can be attached to the Winwing\Winctrl Throttle Desk Mount5 but can work with any 2040 profile. Printed used PLA with a Creality K1C 2025. Infill does not matter, but use at least 3 wall loops to have a bit of stiffness.
These are simple additions for the knobs on your WINCTRL Transponder to make them easier to turn. Unlike some of the other adaptive knobs I’ve designed, the construction of this particular panel does not allow for the knobs to be…
Simple bracket to mount your mcdu to Winctrl's narrow desk mount. There are also matching brackets for the RMP and TCAS available. Works well printed in PLA. Printed on Prusa Core 1+ without issues.
Rudimentary, no frills bracket to go on the back of a WinCtrl FCU to mount to a Fanatec DD. Handy if you're trying to combine racing and flying on one sim rig. Has cutouts for USB connection but needs to be a straight connector and not…
Simple bracket to mount your TCAS to Winctrl's narrow desk mount. There are also matching brackets for the RMP and MCDU available. Works well printed in PLA. Printed on Prusa Core 1+ without issues.
Simple bracket to mount your RMP to Winctrl's narrow desk mount. There are also matching brackets for the MCDU and TCAS available. Works well printed in PLA. Printed on Prusa Core 1+ without issues.
This is a dad joke that also functions as a fidget button using a basic keyboard key switch. I did find it hard to get the switch to stay in place with just glue but I'm sure there is an easy way I just am not trying. I used a 3d pen to…
There are two different replacement knobs included because the shaft for the heading knob on the MCP is slightly different from those used for the course, speed, and altitude knobs. I found that Bambu Basic PLA Light Gray matches the…
This is a simple set of covers for the knobs on the WinCtrl Boeing 737 EFIS that make them easier to turn for those with limited hand function. These are designed to slide on with a friction fit, no glue or fasteners required. I found…
Flat 2 mm templates for checking the mounting holes on a WinWing MCDU-32 or FCU before you print a stand or drill a panel. MCDU: two templates, one for the 136 x 95 mm hole pair (A/B and B rows) and one for 136 x 105 mm (A and A/B rows).…
A clamp for the left end of the Logitech MX Mechanical with two sliding wedges. Push a slider in and it holds Ctrl or Shift down. Pull it out to release. No second hand needed for Ctrl+C, Ctrl+V, Ctrl+Z, capitals or symbols. The need:…
Physical latches that hold Shift and the three modifier keys left of the space bar down, so you can type shortcuts with one hand. No software, works on every device you pair. Who it helps People who type with one hand (amputation, stroke,…
I bought WINCTRL 32 and ran into a problem — there wasn’t enough space on the table to place them conveniently. In the end, I made a few mounts for installation. The first thing I made was a monitor stand that raises the monitor above the…
KDxGP PMPCTRL Check out my socials and other things at https://linktr.ee/KDxGP Like my creations? Consider buying me a coffee ☕ at https://www.buymeacoffee.com/KDxGP. Thank you! Documentation Visit https://www.kdxgp.com/pmpctrl to view…
I made this tall stand so that a 10" screen can fit underneath showing my gauges that I pull out from MSFS 2024. Category: Hobby
KDxGP PMPCTRL Check out my socials and other things at https://linktr.ee/KDxGP Like my creations? Consider buying me a coffee ☕ at https://www.buymeacoffee.com/KDxGP. Thank you! Documentation Visit https://www.kdxgp.com/pmpctrl to view…
Jig for soldering thru-hole components onto the Ctrl-m keyboard controller. Controller outlined here Available from original designer here (outside the USA) Available from ClickyKeyboards (in the USA)
I just created a CtrlAX security cap as I have kids around and don't want an accident to happen. It fits tight so kids cannot easily remove the cap. To remove it you'll have to twist it a bit back and forth. There's an inner space for…
