Cymbal Sleeve
I printed mine in PLA+. Probably better off in PETG, nylon or ABS but 🤷
- Pobrania
- 623
- Polubienia
- 59
- Ocena
- 5
Liczymy pasujące modele…
I printed mine in PLA+. Probably better off in PETG, nylon or ABS but 🤷
A set of skull-decorated cymbal mount nuts for a drumset (designed for Roland e-drum mounts, but will sure work for others too). The skulls were remixed from a wonderful design by bugman_140 (…
I created a cymbal nut with printed threading for backup needs.
These finger cymbals are also called zills. It is a suitable choice if you are an oriental-style dancer and want to practice without making too much noise. You need to print them in pairs and add elastic bands for your fingers.
This is a printable made of this model: https://sketchfab.com/3d-models/cymbal-monkey-22d1626853964fc995cda04814792ae5 I also made a new cymbals. It will require support for the arms. Category: Toy & Game Accessories
I made this model as a replacement for the guitar hero drum set nut and washer set. I used PLA at 0.20 layer height, no supports.
I have DW cymbal arms on my drum rack and needed to mount Roland Crash cymbals. This is a simple fix to allow that to work. Just remove the bottom cymbal threaded washer and replace with this part. The cymbal stand thread is m8x1. I…
Replacements for lost or broken nylon cymbal stand bushings on Pearl 900 Series-compatible stands. Modeled closely on the originals, with a few design changes for 3D printing. They work the same way and accept the original screw. Fits:…
This is a Cymbal Sizzle Chain made from PLA I used a Makerbot Replicator + with the following settings… No Raft Layer Height (mm)0.24mm Infill Density: 10% Number of Shells: 3 Supports: Breakaway material Edit: I've added a few options to…
Just a drum cymbal sleeve I had to make for someone from a use one. Work fine from the people who asked me to make it.
Parametric M6 and M8 Cymbal Nuts for Drum Set This is just a simple cymbal nut for a drum set. I have included versions for a captive M6 and M8 nut, but I have also included the parametric fusion file in case you need a taller or shorter…
Replacement elbow for the Guitar Hero World Tour drum set may fit other sets but I don't have them to test.
My drum kit doesn't get out much so I decided to mount a couple of cymbals on the wall. I wanted the mounts to look a bit better than blocks on the wall so I threw these together. I used the same model ands called the Z to cater for…
Use a nut on the base to secure Post-Printing Category: Music
The little plastic sleeve used to place a crash/ride cymbal in a drum kit, needed to find one of these for my studio but I figured it would be quicker to model one. I printed a couple using PLA and they've held up decently well. Here's…
Designed for a Tama Classic series stand, you could easily spec it up by throwing a cylinder the size you need on it. Prints well enough without support for the hole.
Summary This is a headphone holder which clamps to cymbal or drum stands. I designed this so I could hang my headphones off my Hi-Hat stand so they are always in the right spot when I sit down to practice. This model was designed to fit…
I printed it in concentric pattern, scale it as big as you want :)
I have DW cymbal arms on my drum rack and needed to mount an alesis ride cymbal. This is a simple fix to allow that to work. Just remove the bottom cymbal threaded washer and replace with this part. The cymbal thread is m8x1. I modeled…
I remixed this so I could use Roland V-Drum cymbals on my Alesis cymbal stand mounts. This replaces the plastic pivot and reuses the screw that was holding it to the post. There are two screw holes: One is locked rotation and the other is…
If you have a Pearl 900 series cymbal stand and this piece broke for you, I got you covered. I designed this because mine broke back in 2018 and I was on a hurry. 7 years onwards and its still working perfectly ! If you don't want to…
I needed a clamps to mount a condenser mic under a cymbals on their stand (or any other stand). It needs a M6*40 (in my case) machine bolt and screw (and some spacers). PLA, 65% Infill.
Replacement screw / nut for the SKB Cymbal case (I have the SKB-CV8 but it also works for other SKB cymbal cases maybe). I lost my nut and needed a replacement for it. You will need a 5/16 " UNC nut which you have to insert into the…
Produces old school sizzle sounds on your ride, crash, or effects cymbal with no effort; it instantly changes your cymbal feel, live or in the studio. Print it in two pieces, add your 3 mm metallic ball chain, glue the two printed parts…
If you want to mount an electric drum clamp to a cymbal stand, print out some of these shims and it'll provide a nice simple adapter between the two. Really, this is a nice starting point for any sort of radius-to-radius adaptation. As…
I created this to replace the symbol sleeves on my Alesis electric drum kit. They do not make them anymore. I created the hole for the anti-rotation to use a piece of a metal coat hanger. Easy Print, No supports
I made this one after my cymbal sleeve of DW3000 series stand worn out. This one should also fit with DW Pacific (PDP) cymbal stands.
I couldn't find any roland CYM-10 cymbal lock at a reasonnable price so i decided to design my own version. It works with an m6 nut and a regular m6 screw or drum screw. Best to print with a lot of infill and in PETG for strength.
Print the model with support on th ebuildplate enabeled Remove supports and pressfit a 608 skateboard ball bearing in place switch your standard bolt cover underneath your bottom cymbal felt for the new assembly and your good to go Give…
The rubber hub in one of my Rock Band 2 cymbals ripped so I created a printable replacement. Print Settings Printer: Anycubic i3 Mega Rafts: No Supports: No Resolution: 0.2 Infill: 50% Notes: I printed with Cheetah TPU and 50% infill and…
adapt an unused cymbal stand (with either an M6 or M8 thread) for mounting a microphone with a 5/8 thread
Be sure to print with supports for a more coarse undersurface. Scale to your needs. Edit160223: Added a V2 for jumping cymbal stand feet. Printer Brand: Elegoo Printer: Neptune 3 Pro Nozzle: 0.4 Rafts: No Supports: YES! Resolution: 0.2 mm
Wanted a colored wing nut for my kid's drum set. Couldn't find anything so I made one. Had to be "chunky" so it wouldn't be obliterated by being hit with a stick.
Parametric Drum Throne Stool or Cymbal Stand TPU Foot If you're a drummer, you know that you are always losing or cracking the feet on the bottom of your drum throne and cymbal stands. This mildly parametric model (you'll have to mess…
Extremly simple and quickly designed holder for a cymbal to use it as a ceiling lamp. The lock is glued in to fix the cymbal. It's not the prettiest but works fine. I'm using it for a 20" cymbal without problems. The holder itself…
Designed and tested for Pintech TC series cymbals (14", 16", 18"), but will likely work for the PC series as well. These are a decent solution to prevent the cymbal from rotating while playing, which I found to be a big issue with these…
Male and female wingnuts with the black plastic handle, in the style of vintage Ludwig wingnuts. These parts are partly 3D printed: the male uses a metal threaded rod secured into the printed handle with epoxy, and the female uses a…
I got a car crash cymbal from https://carcrashmusic.com but my Tesla doesn't have a regular air vent to mount it. I purchased the flat mount but that also wouldn't work since I don't have a good flat surface near my steering wheel. I made…
A 3-piece mount for your headphones and phone. Designed to fit snugly on your crash cymbal support. NOTE: This is a model for a cymbal rod with a diameter of ~16 mm. You will have to scale up/down as necessary to match diameter of your…
FR/ Mousse de cymbale de Batterie relativement basique. EN/ Simple (yet functionnal) cymbal pad TPU : 1% infill - 1 wall Other model made with a voronoi pattern available :…
Remix of https://www.thingiverse.com/thing:5226080 The original ones broke with the slightest of pressure while tightening. I made these a lot more durable. I added a grove into the clamp to secure onto the drum kit lip. I printed with…
I needed a practical way to lock the cymbals on my daughter’s custom drum set, so I designed this model. The manufacturer didn’t include any locking mechanism because the kit is meant to be portable and disassembled after each use. In our…
If you are a drummer beginner, it can be really hard to learn all the cymbals and pads names. While the pads are just snare and Tom 1-3, the cymbal names are really complicated to learn. And that is exactly when this model comes in handy.…
TPU - 5% infill Adjust infill for stiffness Not the prettiest but works really well. Full enclosed cymbal pad available here : https://www.printables.com/model/1431968-cymbal-pad-mousse-de-cymbale
A replacement for lost or broken feet on single-braced Yamaha-compatible cymbal stands from the 1980s. Modeled from scratch using an original foot for reference. The original was part rubber. Fits: Single-braced Yamaha-compatible cymbal…
Fits 8 pairs of marching cymbals but the Design can be tweaked to fit more. Took me about 15 hours of work to build. Materials Needed x6-7 2x4x8 3.5” screws 4.5” screws X4 rubber skids Optional wood filler wood stain
Cheap & durable cymbal accessories At semi-professional concerts, the drummers of different bands often share a basic drum kit, but bring their own precious cymbals. Mounting these onto an unknown drum kit can be tricky because of…
Tried to make this a perfect fit, not wobly. It will fit ordinary drums stand M8 screws. I printed in PETG for durability. Slice at 0.1 and 20% infill. For best results you can use the provided 3mf file which includes a dummy cylinder…
so the vision is easy, you put cymbal on the stand and than you will put some soft stuff on top of the cymbal than comes this mount. mount goes to the pin and then you can put some soft stuff on top or u just leave it as it is and put the…
My band director kept spilling his coffee so I made this. It may be a bit small for some cups but it does have some room to be scaled or better yet remixed.
Easy to print, put on top of your cymbal and done!
The Quick Release Nut is designed for 8mm thread Cymbal stands Press and insert the Quick Release Nut up to the desired height in your cymbal stack Press and release to remove Turn to tighten/untighten if desired Remains Locked and will…
Store-bought quick release wing nuts are about $20–30 each. Buy this once and print one for every stand. Both wings up: locked One wing down: spin to adjust Both wings down: slides on and off I use the M8 no sleeve version on my kit.…
my first published model. I know it's horrible as I made it with orca slicer, I'm too old and slow to learn cad any faster . but it will work. Will probably work for all simmons titan versions but I only have the 50 to verify. I used my…
so the vision is easy, you put cymbal on the stand and than you will put some soft stuff on top of the cymbal than comes this mount. mount goes to the pin and then you can put some soft stuff on top or u just leave it as it is and put the…
Parametric Drum Throne Stool or Cymbal Stand TPU Foot If you're a drummer, you know that you are always losing or cracking the feet on the bottom of your drum throne and cymbal stands. This mildly parametric model (you'll have to mess…
This is a printable made of this model: https://sketchfab.com/3d-models/cymbal-monkey-22d1626853964fc995cda04814792ae5 I also made a new cymbals. It will require support for the arms. Category: Toy & Game Accessories
There are two different models that fit to two different diameter rods, 8mm or 12mm. Both models are compatible with Simmons and Roland e-cymbals. You'll need to get some M6 nuts and thumb screws. Instead of thumb screw you can use drum…