Wyniki wyszukiwania: dc

Makita Battery Charger DC18RC Wall Mount

Thanks to blueOcean for making this tool mount. I traced it in OnShape and removed the french cleats and added some screws. The charger fits perfectly. Don't mind the multiple colors, I ran out of filament in the middle of the print.…

WordClock 16x16 LED matrix

BIG news on 11.07.2026: WordClock 16X16 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them please read this list and have a look…

Rohs Step Motor 28BYJ-48 5V DC

Model for use in checking fit, as accurate as it could be using only a mm transparent flat ruler STEP, STL and IPT included Wires extruded 8mm to do fit without bending but are flexible enough to be maybe 2mm clearance on the real model…

WordClock 16x8 LED matrix (2023-V2)

BIG news on 18.07.2026: Software version V5.0.0 available! WordClock 16x8 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them…

Dewalt DCS391 Circular Saw Holder/Hanger

i made a hanger/holder for my dewalt DCS391 circular saw it has 15% infill and 4 perimeters just retract the blade up as high as it goes and place it in the hanger whilst pulling the guard back

WordClock 16x8 LED matrix (2023-V3)

BIG news on 18.07.2026: Software version V5.0.0 available! WordClock 16x8 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them…

Bucket Lift - Modular Marble Machine - Handcranked

We are soon launching a KICKSTARTER ! Assembly documentation can be found here: https://outofmarbles.com/pages/docs This is the hand-cranked version of our bucket lift. Check our other models for motorized version. You will also need to…

Adjustable Pillory Handcuff for Padlocks and Ropes | Verschiebbare Pranger-Handschelle für Vorhängeschlösser und Seile

EN: This is a toy pillory handcuff whose locking piece can be moved and then secured with a rope, a padlock, a carabiner or simply a bolt and nut. At the request of the youngsters, the wrist holes are designed to be rather narrow at…

Shackles, handcuffs, chains

Wortuhr Wordclock lasercut

This is an Open Source Version of the famous & expensive “Qlocktwo” clock. It works with any ESP8266 and WS2812 LEDs The entire project is meant to be made with a laser cutter. You need the following materials: 4 mm Plywood for the frame,…

WordClock 16x8 - 2024

WordClock 16x8 - 2024 BIG news on 18.07.2026: Software version V5.0.0 available! WordClock 16x8 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To…

Fully printed Quadcopter/Drone Frame for 9" propellers

This is a fully printed quadcopter frame, which can be flown acrobatically and has mounting points for a lot of different components. I designed it as a testing platform and made it as modular as possible. The arms went through multiple…

Jawa Sandcrawler with Interior

Star Wars Sandcrawler. Updated 1/14/2026 Amazing Sketchfab model by tegnemaskin Fixed for 3d Printing. Added overall .4mm No UV details needed.

Dewalt DCBL722 Leaf Blower Wall Mount

Here's a model to help mount the Dewalt DCBL722 Leaf Blower, wrapping around the handle for a secure mount. I've also included Fusion 360 and Step source files if you want to customize (includes a model of the handle itself). Bill of…

Folding Pillory Handcuff for Padlocks | Klappbare Pranger Handschelle für Vorhängeschlösser

EN: This is a folding toy pillory handcuff that can be locked with a padlock, a carabiner or simply a screw and nut. At the request of the youngsters, the wrist holes only have a diameter of 48 mm. For ‘adult use’, you can simply scale…

Mic stand for podcasts or video calls

3D-Printable Microphone Stand for Shure SM7B, SM7dB or many others. Elevate your audio setup with this custom-designed, 3D-printable microphone stand, specifically tailored for the Shure SM7B and SM7dB microphones. Whether you’re…

40mm Aluminium Profile Endcap

Endcaps for 40mm aluminium profiles. 40x40 40x80 40x120 40x160 80x80 80x120 If you like the print profiles, please consider rating them. Thanks :-)

Sandcrawler - Star Wars Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)

EDC Battery Holder

*** VASE MODE ***, 0.3mm, 2 Bottom Solid Layers. Tested with Prusa i3 MK3S+, PrusaSlicer v2.4, Generic PETG, 0.3mm Draft Mode. EDC Battery Holders for 2~4ea of AAA and AA batteries. Light and Compact. Flat to fit Trouser Pockets & EDC…

WordClock 16x8 LED matrix (2023-V1)

BIG news on 18.07.2026: Software version V5.0.0 available! WordClock 16x8 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them…

EDC Micro Screwdriver - Keychain for Hex Shank

EDC Micro Series. Compatible with each other. See also: EDC Micro Knife - Keychain (Scalpel) EDC Micro Pill Capsule - Keychain EDC Micro Tools I EDC Micro Tools II EDC Series Box Continuation of the series. EDC Micro. The same capsule or…

Brad Nailer Non-Marring Tip, For Dewalt DCN680

Simple non-marring tip to keep the metal from indenting on the wood. Once printed need to give it a couple of whacks to push the plastic piece on to the metal tip. Print settings I used: 0.2 mm, Prusament PETG, 0.4 nozzle, 15% infill, 3…

DC Shelf for Kinderjoy Funko Pop

here I have put together a wall mount for the Funko Pops figures from Kinder Joy there are 2 files once the house and once the 3 zack, which you have to print individually depending on which side you put the 3 zack on, you have to support…

RAD Power Radcity Ebike Battery holder for Rack or Wall

I bought Sue a second battery for her Rad Power Radcity Step-thru 3 (2021) eBike. I needed some way to attach it to the bike. I designed and 3D printed an adapter that mounts to the rear bike rack to hold the battery. You can lock the…

Dewalt Nail Gun DCN692N Hanger

This hanger will hold the Dewalt DCN692N 1st fix framing nail gun printed in PLA can be done with PETG, Nylon, Carbon fibre ect.. depends on your preference with 50% infill and the perimeters at 4

Collar Stiffener Card (x6) - EDC Kit

A 'collar stiffener only' version of my EDC (Emergency Debonair Card) I had a few requests to make just the collar stiffeners, so I made a credit-card sized version that holds 6 collar stiffeners. There's also a mini x2 version here. Key…

IDC 10 pin Male Box Header Frame 2x5 pin Connector

This 3D-printed IDC box header frame is designed to convert a regular 2-row pin header into an IDC box header. This is a useful solution for those who need to replace an IDC box header but cannot find one in stock, or for those who want…

EDC Valet Tray | Every Day Carry

Everyday Carry Valet Tray Room for your phone, card wallet, and keys. The trays are laced with a TPU inlay to make them softer and somewhat grippy. There are two options with either room for a charger cable for your phone or a wireless…

Ski boot dryer with 12VDC FAN 92x92mm

During winter fun in the snow, shoes often get wet. That's why I designed and built a 3D printer dryer for two pair of shoes with 12VDC fan 92x92mm and flexible corrugated hose diameter 32mm. Can be used in a car or caravan with 12VDC…

EDC Utility Knife with Paracord Handle

EDC Utility Knife with Paracord Handle The handle is wrapped using a shoelace or paracord. Hardware Required: 4pcs M3x5 screws At least 130cm Shoelace or Paracord Paracord Handle Tutorial: You can find a step-by-step guide on how to wrap…

WordClock 2024/2025 desk holder/stand (16x8 & 16x16)

Desk holder/stand for all WordClock 2024/2025 ( 16x8 and 16x16 ) models in case you want to lean your WordClock 2024/2025 a little bit back on your desk, sideboard or low board. =) With the shown big printed screw you can adjust the angle…

DIY USB-C Power Delivery module PDC004-PD housing

Cable Connector Housing for USB-C Power Delivery Module PDC004-PD This 3D model is designed for a custom cable connector housing, specifically for the USB-C Power Delivery module PDC004-PD. It is used to create a charger adapter for the…

Dewalt DCN660N Nail Gun Hanger

This hanger will hold the Dewalt DCN660N 2nd fix finishing nail gun printed in PLA can be done with PETG Nylon, Carbon fibre ect… depends on your preference with 50% infill and the perimeters at 4

DCC-EX Case for EX-Motorshield8874

I liked @Nebbish's DCC-EX case, but it didn't fit my hardware, since I'm using the EX-Motorshield8874, not the Arduino Motorshield. This adjusts the side ports to fit the 8874. I also found the fit of the microcontroller a bit too loose…

Dyson DC07 vacuum bag attachment

My Dyson DC07 hose has an arch on it and did not allow me to suck the air out of my vacuum bags. This attachment will snap into your Dyson hose and allow you to get all the air out. Printed with PLA but PETG will work as well.

EDC SwissCard wallet

I was looking for an alternative to the Victorinox Secrid wallets because none of them included the cash compartment option along with the SwissCard. I've put together the remixes of Rioes and Brandon Shelton. I simply did a resize,…

Srdce přívěsek

Srdce přívěsek na klíče

Collar Stiffener Card (x2) - EDC Kit

A 'collar stiffener only' version of my EDC (Emergency Debonair Card) I had a few requests to make just the collar stiffeners, so I made a mini version that holds 2 collar stiffeners. There's also a larger credit card sized x6 version…

Every Day Dice Carry (EDDC) Box "d20"

Have your dice always with you. This is the Every Day Dice Carry. Keep your dice save and organized with a magnetic box in a slim format. You can add felt, leather or EVA foam to the inside (up to 2mm thick). With one insert, the lid can…

DC Comics Keychain

The Keychain is 50mm in diameter with a 6mm key hole I did 100% Infill for better strength.

PolarPup – Magnetic EDC Razor Knife

🐾 PolarPup Version 2.0 is out! Check out the new version here: https://www.printables.com/model/1802893-polarpup-v20-magnetic-edc-razor-knife ⚙ Version 2 Enhancements The PolarPup v2 was literally designed from the ground up (because I…

Wallmount for Makita DCG180ZX

For a complet set you need 1 Wall mount for caulking gun 3 tube holder 1 wallmount for push knobs 3 wallmount for nozles Happy printing :D

EDC Beads elastic cords for Pocket Rack EDC Tool Organizer

Adjustable beads for cord locks elastic drawstring

Micromatch IDC crimper Adapter

I wanted to make a quick disconnect cable for my MK4 in the original enclosure, but since the ribbon cable comes pre-split from Prusa making my own seemed like a good idea with some more standard IDC connectors at the midpoint. Micromatch…

Crimping Tool Adapter for IDC Connectors

I purchased the tool for my xLDC Quick Release to make it easier to crimp the ribbon cables. This is because more connectors have to be crimped with the xLCD than with the quick release of the MK3S+. You need a quick release if you want…

Deek-Robot DC Volt Ampere Power Meter Case

Case for Deek Robot Power Meter. Print settings: Material: PETG Nozzle: 0.4mm Layer: 0.2mm Infill: 100% Support: YES (like last picture) What you need: 4x 3mm threaded insert 4x M3 screw 4x 4mm banana socket 1x switch (d=6mm) 1x 9V…

Dreamcast power supply port to DC plug adapter for picoPSU

Adapter for attaching a DC plug to the Dreamcast power supply port, e.g. for use with picoPSU. I designed this from scratch in Fusion 360, but it's based on collingall's work. My main goal was to create a model that prints well without…

DIN rail side mount endcap (now with version for Ikea Platsa)

DIN rail endcap to mount it between two parallel surfaces. I intended to use to mount a DIN rail with some power supplies and relays between to legs of a modified Ikea Lack enclosure. Update 2024-04-25: Added v5 with modified 50mm hole…

Mikrofonhalter HyperX QuadCast

Gedruckt mit Ender 3 V2 Nozzel: 210 Bed: 60 Speed: 50mm/s Infill: 40% Gyroid Material: Geetch PLA

Dyson DC19/DC20 stair tool (nozzle, brush)

Original Dyson part number 906960-11 Does it differ from the original? Yes, although it's functionally the same. I haven't added those weird ovals around the outlet. I don't think they add much to structural strength. Underside brush is…

DC PWM motor controller case lid

Small remix of a nice model for a PWM motor controller. The capacitator is a littlebit bigger for the case so I edited it a bit. Print settings Nothing special, I printed with 0,2 mm layer hight, should be fine with 0, 35 mm. Printed with…

Enclosure for RMHV2.1 - DDCSV2.1 - RMHV3.1 - DDCSV3.1 - CNC Router Controller

I designed this enclosure to mount it to my MechaPlus ProBasic 06-05 CNC Router . But it can be used for any CNC Machine. I deliberately left out the Stepper drivers which are in a separate enclosure that came with the machine. It is…

EDC Series Box

EDC Micro Series. Compatible with each other. See also: EDC Micro Knife - Keychain (Scalpel) EDC Micro Pill Capsule - Keychain EDC Micro Screwdriver EDC Micro Tools I EDC Micro Tools II Continuation of the series. EDC Micro. Properties 10…

Asus PG42UQ / HyperX QuadCast mount

Simple mount for attaching the HyperX QuadCast to a Asus PG420UQ monitor.

Feet risers for microwave Candy EGO-G25DCS

These are some simple feet risers to rise your Candy EGO-G25DCS microwave oven. Print instructions Material PLA Resolution 150 Supports No Brim No

Football Worldcup Trophy beerglas

The FIFA Worldcup 2022 in Qatar is mere hours away, as I'm uploading the last files of this project. This worldcup is the first of its kind to take place in autumn, when the temperatures in most of the western football watching world…

Srdcovka, srdcová lopata (Heartshovel)

Přítelkyně mě požádala o lopatku pro dávkování krmení jejím milovaným hlodavcům a tak mne napadl, když se blíží ten Valentýn, tento motiv. My girlfried asked me for a feeding shovel she could feed her beloved pets with and because is the…

Case with cover for mXion CV-Programmer (used for DCC model trains)

See also the new version with air vents . As I didn't really liked the original housing of the CV-Programmer by mXion, I just created an alternative. To prevent the electronic board from moving inside, I suggest to add a small…

Dyson DC19 holder

This holder works well when printed in PLA+ or PETG. There are two screw holes M4 to mount the holder to your wall.

Dream Chaser DC200

The Spacecraft The Dreamchser DC200 is a proposed crewed version for the Dreamchaser cargo spacecraft developed by Sirra Space Printing, Assembly tips Components, epechally tail fins have loose fit, use of glue is adviced Supports for…

WordClock 16x8 LED matrix (2023-V3) - Closed Front

This contains only the German version of the Word Clock but with a closed front, but it's adaptable for other languages if you take a look how I stacked the different colours. I used a darker bronze gold (from Redline Filament) for the…

Dyson DC07 Angle Attachment

This attachment snaps into a Dyson DC07 Hose. Printed with PLA but PETG works as well.

fallkniven dc4 whetstone holder

This is a simple holder for fallkniven DC4 whetstone, but will fit similar whetstones of similar size. Could be scaled to fit whatever size you have. I printed it in PLA and TPU, both work great. If you need a similar holder for any other…

Hardcase for sunglasses with easy access / Glasses Case

Hardcase for sunglasses (easy access) This case was orignally designed for an Oakley Ejector inside its protective pouch . Other glasses should also fit, as long they do not exceed the following dimensions: 142 mm (W) x 44 mm (H) x 36 mm…

Lino/Woodcut Tool Rack Turntable Holder

Original by MOJOBOBHOOCHYMAN https://cults3d.com/en/3d-model/art/lino-woodcut-tool-rack No supports required and works with 3d printed 608 bearings, i recommend the one by @AdaCohen https://www.printables.com/model/410574-fast-608-bearing…

Dyson DC25 upright vacuum wand cap, part number: 914114-01

Dyson DC25 upright vacuum wand cap, part number: 914114-01 modified from original design to fit the larger dc25 including cutout/alignment tab. Print tested at .8 nozzle with .4mm height. (.4 nozzle with .2mm provided as well). I like the…

3Dconnexion box

Please split the file into its two components an align them properly using the tools in PrusaSlicer. Supports are not required, I recommend to use separate layer heights for each part, as the lid may be difficult to open and close when…

Prusa XL Buddy3DCam Sidemount

This Buddycam mount can just be clicked over the left or right top extrusion endings and has 4 screwholes for mounting the twist locking disk onto it. Apparently also compatible with Google Nest 2nd Gen indoor camera's, they have the same…

Redcat RDS ESC Mount above Battery

I needed a different location to mount my ESC while putting on a custom chassis and moving the battery rewards on my Redcat RDS….so I created this little table that bolts directly on top of the battery mount! Easy! I printed in PLA,…

Adjustable height endcap for table tenis, DECHATLON PPT 130 OUTDOOR

Adjustable height endcap for table tenis, DECHATLON PPT 130 OUTDOOR

Storage adapter for Dyson DC26

With this adapter you can store the Dyson Musclehead floor tool in the storage clip of a Dyson DC26 vacuum cleaner. You might also like this Dyson hose adapter: https://www.prusaprinters.org/prints/19902

Bror Magnetic LedClip

Magnetic LedClip for the Bror Ikea table. Magnet : Ø 4mm, 2.7mm height

Battery case Black & Decker BDCB12B Akku (12V 1,5 Ah)

This case is meant to hold the battery “BDCB12B” (12V 18Wh) for Black & Decker Tools . The battery holder can be attached to the wall (using adhesive tape) and the battery can be charged via USB while sitting in the case. The charging…

Drive Nitro Rollator Walker 28.55mm endcap

End caps for the frame for Drive Nitro Rollator Walker, these caps fit right above the frame where the wheels are at. I printed mine in ABS

LRS-100 Case (Includes mounting point for Hf105f-4 24VDC relay)

Now, I'm lazy. And I don't like wasting power from devices being on when they don't need to. I also wanted to be able to power the lighting for my Prusa enclosure AND have capacity to upgrade to more powerful ventilation fans without…

Top plate for ACEdc Fortune Cookie

A replacement for the ACEdc Fortune Cookie top plate. Its light weight makes it spin faster and the magnets can hold the plate down better, no more flicking off the top plate during play. The plate only weights 6.8g with the magnets. The…

Dyson DC41 cyclone catch

Canister fall off when emptying it? Maybe your missing this part on your Dyson DC41 . Print out this part, cut a ballpoint pen spring in half put under the button holding down while sliding in and viola' - you have fixed your waste…

Quick access EDC third hand holder

This 3D model is a compact EDC Quick-Access Third-Hand Holder , designed to temporarily secure everyday objects during tasks that normally require more than two hands. It acts as a reliable “third hand,” enabling efficient, controlled,…

Last Podcast on the Left Plaque

Just paying homage to the boys. Haven't seen anything 3D printable related to them so I decided to make it myself

Cardcase

Recommended to print upright to ensure that no difficult to remove supports are made.

Doomsday Bust - DC Comics Figures

Any feedback would be greatly appreciated . Perfect for miniature projects, modeling, dioramas, etc. Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed

Vana DC 90 Remote Wallmount

This wall mount can be used to put the Vana DC90 remote into. The remote can also be used when it is at the holder. Print Instructions: Print standing upwords, not laying on the ground. This way, no support is need and the print quality…

EDC third hand holder

This 3D model is a compact EDC Quick-Access Third-Hand Holder , designed to temporarily secure everyday objects during tasks that normally require more than two hands. It acts as a reliable “third hand,” enabling efficient, controlled,…

Halterung Schild für FoodCube

Eine kleine Halterung für ein Schild an unserem FoodCube

BM1 Home made Detector for Train DCC 1N4001

(French follows) Lenz was the creator of this diode bridge for detecting the presence of trains on the rails. This home made model features both a case and a soldering aid for the 5 1N4001 diodes. The case is designed to be screwed…

Potkaars (podcast logo)

Logo of a dutch Podcast, printed in multiple color. Color changes are done at specific z-height, all are at 1 mm intervals. Print instructions It's printed in multiple colors. Switch colors at specific layer heights. Every color-switch is…

Gardenchair Endcap

I designed this for a friends old Gardenchair. The old Endcaps was worn out and need to replaced. He told me that it need 2 soft hammerstrokes to fit. Printed in PETG, 0.3mm, 0.4 Nozzle

protikus k západce

normální základní tisk.jde i bez podpor.

Srdcové piškvorky

Srdíčka vytvořená v TinkerCad - jedna verze z kruhu a trojúhelníku, další ze základního tvaru srdce. Piškvorky.

cDc Sign

100x160mm sign, with a tribute to the BBS days. Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my signs . If you enjoy these,…

NAS ITX PC Case with stackable expansions [MODCASE MASS]

The Modular Attached Storage Stack ( link ) is a compact 3D printed NAS enclosure with expandable bays support up to 8x 3.5" + 3x 2.5" drives. 👉For the premium version of MASS with additional features, please see MASS Premium Page here .…

Modular Display Stand for LEGO Star Wars / DC / City [Main Project]

Before you go further! This project is for personal use only. Any commercial use is forbidden Follow me on Instagram @StawiamKlocki.pl to keep up with latest designs Go to Google Sheets to get files list for your LEGO models Watch General…

EDC Container Box Capsule + O Ring

--- latest Update: Salt & Pepper Insert! --- Since the camping season is starting again I designed Inserts to use the Container for Salt & Pepper or sth. like that. Also I did minor improvements to all parts. --– Printed O-Rings (TPU) ---…

V3 Tri-Loop or Tri-Blade Toroidal Propellers for FPV Drone Quadcopter Cinewhoop

This is my WIP third generation tri-loop or tri-blade design which improves upon the second by following more traditional rules of propeller blade design whilst also reducing weight at the outer edge, (hopefully) improving prop response.…

Toy Handcuffs with Key (print-in-place)

These print-in-place locking handcuffs print without supports. I put in a comfortable number chain links to make them suitable for casual wear. That is, you could wear them at a party and still, say, eat and drink. And most importantly,…

PocketDriver - EDC Hex Bit Screwdriver w/ Storage

The PocketDriver is a sleek and practical EDC bit driver designed to hold up to 4 bits within its body. Help me create more FREE models! If you like the stuff I create, consider joining my printables club as a supporter. It makes a world…

Midcentury Planter

Midcentury planter with legs, available in two sizes with opening of 114 mm and 71 mm for a smaller pot. Leg section has a fairly tight fit so does not really need superglue but you can also glue it if desired. If you want to support me…

Nordic Knurled EDC Capsule

Keep your small essentials organized, safe, and stylish. This 3D printed EDC (Everyday Carry) container is designed with a focus on tactile feel and rugged utility. The detailed knurled texture not only provides an excellent grip—even…

KeyCarry - EDC Key Organizer (M3 screw compatible!)

Why carry your keys as a jingling mess if you can carry them on a beautiful organizer?# Help me create more FREE models! If you like the stuff I create, consider joining my printables club as a supporter. It makes a world of difference to…

EDC Rugged BOX

There are two versions of the box, one with a carrying ring and one without. All the printable parts files are already correctly orientated for convenient printing in STEP & STL & 3DM files. 1. EDC BOX BODY 2. EDC BOX LID 3. HINGE ( with…