Liczymy pasujące modele…
Original Dyson part number 906960-11 Does it differ from the original? Yes, although it's functionally the same. I haven't added those weird ovals around the outlet. I don't think they add much to structural strength. Underside brush is…
Wydruk około 3,07 €–3,75 € nettoWstępna wycena jednego wariantu
The Spacecraft The Dreamchser DC200 is a proposed crewed version for the Dreamchaser cargo spacecraft developed by Sirra Space Printing, Assembly tips Components, epechally tail fins have loose fit, use of glue is adviced Supports for…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Dyson DC25 upright vacuum wand cap, part number: 914114-01 modified from original design to fit the larger dc25 including cutout/alignment tab. Print tested at .8 nozzle with .4mm height. (.4 nozzle with .2mm provided as well). I like the…
Wydruk około 0,57 €–0,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
With this adapter you can store the Dyson Musclehead floor tool in the storage clip of a Dyson DC26 vacuum cleaner. You might also like this Dyson hose adapter: https://www.prusaprinters.org/prints/19902
Wydruk około 0,62 €–0,75 € nettoWstępna wycena jednego wariantu
Description This is a replacement part for the Dyson DC26 left wheel. I accidentally broke the Dyson DC26 left wheel but couldn't find any replacement part, so I designed this. This replacement model has a different shape than the…
Wydruk około 1,64 €–2,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I had to make an connector for @Sembazuru's original model it to connect to our Dyson. My connector broke the other day so I have copied the original but reworked the nozzle to fit our DC25. It may connect to other Dysons of a similar…
Wydruk około 2,86 €–3,50 € nettoWstępna wycena jednego wariantu
Summary This is a model of a Honda Integra Type R DC2 (JDM) in a kit / gift card style. Some characteristic details can be discovered. Equipped with separate spoiler and big exhaust :) After printing, the model can be assembled with the…
UPDATE 3/20/2023: I've updated the design a bit so that it fits better inside the vacuum. It now resembles the original part a bit more. V2 Changes: - The underside now has a hollow cone shape. - The part is shorter so it fits better -…
Eclosure for WX-2412 24V power supply board. It was designed with 3D printing mentality. No supports needed. CAD files included. Features: -The 40mm air intake fan -XT60 connector for DC output -IEC320 C14 socket for AC input -Easy…
Wanted to use a cheap indoor home automation PTZ camera to ‘spy’ on our new puppy. Most of the surfaces nearby were too close and too high, so quickly designed and printed this angle mount to all the camera to be mounted at an angle so we…
Dyson DC08 and DC20 Handle. This is a reupload of the original “Griff_V1.11.stl” model by Murkur11 which I found on Thingiverse. I haven't actually make any changes except for bringing the original file into Blender to fix the “Error 202…
NiteCore EDC27 RIS Adapter This adapter allows you to mount your EDC27 flashlight to any RIS you have, making it in instant an tactical light. You can use clips to secure it on no recoil/low recoil devices, or use 2x M3 DIN912 screws to…
This is the large beater brush gear for a Dyson DC25 vacuum. It may fit other models as well. The factory part is designed to fail because the belt is cogged and there is no other way for it to fail other than burn up the motor. Dyson…
Print settings: 0.6 Nozzle TPU Wall loops: 2 Infill density: 100% Infill pattern: Rectilinear Support: True Type: Tree If you need the STEP file, please contact me.
Tailswitch guard for Nitecore EDC27. It replaces the original plastic that goes together with the clip. As I didn't find any "ready available" tailswitch guard model for the EDC27, I made one myself and wanted to share it here. There are…
This is a replacement for the catch that secures the hand-held tube to the flexible hose Category: Replacement Parts
My DC21 motorized head brushbar motor stopped working. It turned out the center gear inside my DC21 motor head brushbar motor was completely stripped. Dyson doesn't sell or fix these anymore and recommended I buy a whole new Dyson vacuum.…
It's a replacement cap for DC24 wand upper handle. Print it out with the flat part (top) against the plate, and pop it on.
Replacement part for Dyson DC25 - Power Cord Hook/Holder/Wrap/Toggle/etc Based as closely on what is left of my broken part as possible; the height of the hook is a total guess as I don't have an original to measure. edited 2022 11 18:…
May need to be sliced in half to fit print bed 100% infil
The brush of the Dyson DC24 was broken because of the end ca. I remodelled it and also added a handle for easier removal
Just a holster for the EDC25 flashlight. As far as I know, there is nothing like this so now there is I should get around to printing it soon… Please check out my other models.
There are two versions of the lid: one small version and a bigger version which offers enough space for a protective cloth.
Replacement for the keyboardclip of a Cherry DC2000. No Brim. No Supports. Printed in PLA with 0.4 Nozzle @ 0.1 Layerheight. Low layerheight recommended for best fitting. Model in the picture was printed with brim, that's why it's a bit…
This fixes a common fault on Dysons DC24 where the ball becoming loose and clunky and gets significant play up and down on the left side of the ball if you look at it from the front. This play can cause the ball to catch on the HEPA…
This is a case for the BTT PI 1.2 with the DC input exposed in case you need to power with the printer's psu.
v2: after some use I noticed that the old version is a bit hard to pull the flashlight out of. So I increased the offending clearence and added a bit of a rough surface where the part meets the fabric and it improved a lot. Just a simple…
Why spend $12 on a set of 2 from AMAZON LINK : https://amzn.to/4hey1bJ #ad …when you just need 1 and can 3Dprint it from TPU for a fraction of the cost and less than 2 hours in time. This is a brand new foam seal gasket for the cyclone on…
Brush gear cog thingy for a Dyson DC25 vacuum cleaner - see photos... print solid spare part The original one broke in my vacuum cleaner but this should work fine…
A connector I made to connect my shop vac to an old Dyson handle. https://cad.onshape.com/documents/bb065367784afe362052641f/w/1ce387ac47612747f635b1da/e/b03ccf163bbf6e89a01e2eec Use support for the outer indent. Set maximum overhang to…
Mit diesem Adapter kann ein alter Dyson DC29 ... an die Shaper Origin Gen 2 angeschlossen werden
Eclosure for DC2412 24V power supply board. It was designed with 3D printing mentality. No supports needed. For XT60H.
Dc2.1 panel jack to cable adapter small print to use the DC 2.1 x 5.5mm panel jack (like the one in the picture) as a cable end jack... Print 2x Half.stl with supports Print 1x Ring.stl (you may need to adjust the ring size depending on…
Print in PETG / 0,2mm Layer Height / 40% Infill
The letters should snap fit to the base, no glue needed. ⚠ The STL files are scalled up 400% in the preview pictures. The 3MF file already includes the upscaled version.
A simple action tracker for DC20, originally designed by Crafter64. I just filled in the negative space on the symbols, and added them as separate pieces in the .3mf files, for easy MMU printing. Designed for the DC 20 TTRPG by The…
Holds the Nitecore EDC23 flashlight, with some play in the container. Could be a bit more snug, but I didn't want to print it a second time.
This is a replacement part for Dyson DC26 left wheel. I accidentally broke the Dyson DC26 left wheel, but I couldn't find any replacement part, so I designed this. The model of this replacement part has a different shape than the…
This is a collar that fits behind the suction cup of the Halfords HDC200 dashcam. Over time the cup will lose suction power, so I designed this thin collar (1.2mm in thickness) to go behind it, so it will raise the borders creating a bit…
ABOUT THIS SCAN This is a raw 3D scan of an original Honda Integra DC2 headlight. The headlight was scanned in multiple sections and aligned to preserve the original dimensions and surface curvature as accurately as possible. The purpose…
A simple cover for the IDC20 to DB19 adapter board that comes with the FloppyEMU. I saw one in a project over at https://github.com/ThorstenBr/FloppyEmuDiskIIEnclosure and it inspired me to make one that suited my own tastes. You'll want…
I needed a mountingplate for the LANTRO JS IDC26P-B adapter ( https://www.amazon.de/gp/product/B0946ZFHB8/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 ), so i designed this one. I used M3x4x5 threaded inserts and M3 screws for it and…
This is my design of a replacement part for the Dyson DC29 vacuum cleaner tube holder. I just sanded down the old broken part and glued on (hot glue) the printed replacement. Update 2026-06-05: Updated the model, so it slips further in
This remix consists of: Place holder for CyberBrick module and ESC https://www.aliexpress.com/item/1005011760641733.html?spm=a2g0o.order_list.order_list_main.21.398b1802CfGKXQ Larger chassis to fit battery Bigger motor mount to fit DC 280…
Wer kenn das Problem nicht der Original Ring für den Canon EVF-DC2 Digitalsucher ist weg. Canon bietet diesen Ring nicht als Ersatzteil an oder ruft Preise auf die nicht realistisch sind, Hier ist die Lösung Material TPU 1x Ring für…
The DB-19 connector on the Atari ST family hard disk (ACSI) port has not been manufactured for years. At the same time, most current ACSI devices moved to the more available 2x10 IDC-20 header. This is an enclosure for the SidecarTridge…
Simplifed Terminal Block HL-IDC20-TB-SP Made in Solidworks 2024 SLDPRT file included Mesurments taken on a real Terminal Block HL-IDC20-TB-SP Bornier Simplfiié HL-IDC20-TB-SP Fait dans Solidworks 2024 Fichier SLDPRT inclus Cotations…
Place on the Back and printing should work without support(worked for me).
ecu plate to mount an aftermarket ecu. second version has the Haltech S2 mounting holes, also uploaded in thingiverse if you would like to see pictures of it mounted in the car.
I went to give my DC29 vacuum a good cleaning and found the OEM gasket for the cyclone container to be pretty much gone. I modeled this to print a replacement gasket for myself and it fit perfect. I printed mine in foaming TPU (TPU AIR)…
CZ - Kingdom Come: Deliverance II (KCD2) je realistické akční RPG z pohledu první osoby od českého vývojářského týmu Warhorse Studios vedeného Danielem Vávrou . Hra vyšla 4. února 2025 na PC, PlayStation 5 a Xbox Series X/S. Nabízí…
This is my design of a replacement part for the Dyson DC29 vacuum cleaner tube holder. I just sanded down the old broken part and glued on (hot glue) the printed replacement. Update 2026-06-05: Updated the model, so it slips further in
Print settings: 0.6 Nozzle TPU Wall loops: 2 Infill density: 100% Infill pattern: Rectilinear Support: True Type: Tree If you need the STEP file, please contact me.
