Liczymy pasujące modele…
Are you also tired of guessing which side of the USB stick has to go which way into the printer? Here is the solution: a housing for you default PrusaMini USB flash drive. The fun thing is, you might test some new technics: printing with…
Wydruk około 0,20 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Just an stl of the neko cat that is default in the ender 3 sd card. I just made it an stl
Its side and corner pieces for the default honey comb wall
After downloading the files from the original post, I was missing the side part, so I made it. Thanks to the author!
With special thanks to the original RostaP's https://www.printables.com/model/152592-honeycomb-storage-wall and along with Christian Long's https://www.printables.com/model/558180-honeycomb-wall-large-panel-format-edge-corners In order…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Are your parts not fitting…
You will need to order the unassembled or LP version, and desolder the USB connector from the amp board if you don't order unassembled. You will also need to solder the wires from the USB cable directly to the amp board. This uses 3.8mm…
I made and tested it for my Ender-3 V2 Neo, but should work with all Neo Models as they use the same hotend setup. In my case, it increased airflow and decreased some noise too. The weight is also drastically decreased over the default…
De: Dient dazu, den Stecker des Defa MiniPlug Anschlusskabels sicher zu verstauen, während er nicht benötigt wird. Zusammenbau: Wird mit vier M4x16mm Zylinderkopfschrauben ans Kabel geklemmt Druckeinstellung: 0.4 Nozzle 0.2mm Layer Height…
Edited the model from the game to be printed in multiple pieces, support might be needed for the blade. My print did'nt work out that way but if you have good tolerances you might be able to friction fit the whole thing.
An additional spool tube for a default Anycibic mount (Maybe others too). Check step or f3d for dimensions and compare to yours. Just in case.
Why 0.3 Nm? source: The right Torque for your Prusa XL Nextruder Nozzle by INVESTEGATE Printing open the PrusaSlicer file as project print the objects using PETG (DON'T throw the purge, may it is needed later). Object torque-case-B is…
My attempt at printing a fellow Redditor's creation. The STL needed to be cut on top and bottom to ensure they are flat, and the print settings have been modified from preset. See the .3mf file I printed. Print instructions Setting:…
This is a dummy 13 default pickaxe from Fortnite that I made using my dummy 13 accessory grip which you can find here: https://www.printables.com/model/1289048-dummy-13-accessory-grip Pictures coming Enjoy!
DEFA-Stecker Halter für Einsatzfahrzeuge (RTW, KTW, KdoW, uvm.) Ideal um z.B. am eigenen Kabel zu befestigen. Bei uns z.B. haben wir um das Kabel noch Schaumstoff, damit die Fahrzeuge nicht zekratzt werden. Hier war es mit der…
I needed a simple case for bluetooth proxies. As I have poor signals, I wanted to place the antenna as far from the noisy/interfering electronics as possible. I do not need any of the pins, so they are not exposed. The case is snap-fit,…
Floor stand for Defa Termini II 1400w car heater. Needed one for this winter and my car doesn't have fixed mount possibility for it. Local shop asked 18eur for piece of plastic, so I designed it myself and made it even better than the OEM…
Roblox Pls Donate booth
Support permettant de recevoir les cartes d'équipement, ainsi que celles des zombies. Pioche & défausse. /!\ Ne fonctionne pas lorsque les cartes sont dans des sleeves /!\
Our own development is based on a remix of the original Prusa mask, which is a bit narrower and has an optimized hexagonal cutout. Our own adjustments / improvements are: Stackable version without support material fits on Prusa Mini print…
Halter der per Kabelbinder am eigenen Kabel befestigt werden kann
This is models for many common inner barrel sizes. In addition to the standard round barrel options, options with a lower and upper bar are made. And also add option to use this outerr barrel with top ris and my TDC hop up module…
This is my take to fit an Afterburner on the Ender 5. This mod doesn't require to get a new hotend or even move the hotend from its original position. I used VORON's official STEP files and modified some parts and also added my own…
Diseño conceptual Esta figura esculpida está inspirada en el personaje Kanami Girl Strinova, destacando un diseño estilizado y dinámico que combina elementos futuristas y elegantes. Uso Ideal para coleccionistas de figuras y aficionados a…
Diseño conceptual Esta figura representa a una chica guerrera en posición de ataque, lista para enfrentar cualquier desafío con un armamento considerable. Su vestimenta y pose transmiten una imagen de fuerza y determinación. Utilidad…
the well known infamous glove from slap battles is now usable in real life and you can play sb in real life now! (not made by me btw)
Diseño conceptual Flavia Strinova es una figura detallada y estilizada, diseñada para capturar la imaginación de los entusiastas de los modelos 3D y los coleccionistas. Su postura dinámica y los detalles en la vestimenta aportan un toque…
Beschreibung Stiftehalter im Gewindefahrwerk-Design – 3D-gedruckt Dieser außergewöhnliche Stiftehalter in Form eines Gewindefahrwerks ist das perfekte Accessoire für alle Auto- und Tuning-Liebhaber! Präzise im 3D-Druckverfahren…
CT side default knife. Prints great in PLA. Model is scale to size of in game model, may need rescaling for your printer :D works from scales of 20%-300%!
I developed this rearcover by scanning-measuring. Just because the original one start to develop some cracks after some time. Unfortunately, installing this rearcover you will lose the NFC antenna, which is glued on the original…
This is the standard fan duct (Bottom Horns, as mentioned on the EVA site) with mounting holes for the Beacon Eddy Current Surface Scanner Rev H. Updated the height of the mounting platform to allow for the recommended 2.6 mm clearance…
Diseño conceptual Esta figura representa a Chiyo, equipada con un rifle y vestimenta táctica, reflejando una mezcla de moda moderna y temática de videojuegos. Uso Perfecto para coleccionistas de figuras y entusiastas de los videojuegos y…
Diseño conceptual Esta figura representa a una chica guerrera en un estilo moderno y futurista, capturando un armamento y vestuario detallado e intrincado. Uso Esta figura está pensada para coleccionistas y aficionados de modelos 3D que…
A crosshair laser guide holder for two 12mm line lasers for a drill press from Parkside PBTM 500 A1 with 46mm pipe diameter but it is easy customizable by the spreadsheet in the attached FreeCAD file for other diameters and lengths. The…
Printable Mount for T1 Redot (China clones) in 3 different sizes. With a Paintball Mask I use the Highest one. Print Settings Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Herz PLA Category: Sport &…
Holds defa cable away from ground/snow and covers contacts. Also zip tie installation to poles. I don't know if calix cable fits. Please make a comment if it fits also.
Diseño concept El diseño de este modelo 3D se centra en un personaje de apariencia elegante y futurista armada con un rifle. Sus detalles intrincados y su postura dinámica destacan la calidad estilística, lo que la convierte en una pieza…
Default T Side knife from CSGO. Prints great in PLA. Model is scale to size of in game model, may need rescaling for your printer :D works from scales of 20%-300%! Any issues, drop me a message!
I wanted a custom 9V battery holder so I developed a parameterized container generator in OpenSCAD. The program is generic and is useful for other sized containers (such as to accommodate other types of batteries or for organizing beads,…
If you want to make me happy and you have Discord, join my server ;) https://discord.com/channels/974098819379777566/1053870875444785163
This Newtonian Telescope is fully parameterized, the default values are main mirror 200mmxf1200 and secondary 40mm. It is more compact to print and more stable when mounted than other projects, easier also to colimate. ps.: It is a…
The 3d model of the default knife in the video game Valorant. If you like the design please check out my YT channel (it's in Portuguese) https://www.youtube.com/c/zidergaming Category: Video Games
Fits inside the 8.5" cradle - Available at - https://www.thingiverse.com/thing:3766352 Designed for A4 paper folded to A5. Has spacing for awl positioned every 20mm with a border of 15mm at each end. I am using this where I cut 5mm off of…
lightweight 3D printable RC wheel rim design, weighing in at just under 27 grams. These rims are designed for TL-01, But they're versatile and fit most RC cars equipped with the standard 12mm hexnut. Key Features: Lightweight…
I recomend you to print version V2 it has fixed problems. I have wanted lens hood for my Panasonic Lumix GX880 with default lens H-FS12032. It is really hard to get them and they are not cheap, so I designed it and 3D printed it. If you…
Blower fans often come with a duct fitting, and I'm very surprised no one's made a replica of them for printing. The included .stl is around the right size for a 9733 blower fan to fit a 19mm CPAP tube, and I've included the .scad file…
These sample plates allow you to quickly compare the different BumpMesh default patterns in three different sizes, helping you determine the best choice for your own designs. BumpMesh.com is an awesome free tool created by the YouTuber…
this is for defa charging cable to mount on the wall
literally a default cube...
Meaning no disrespect whatsoever, I didn't want the face of some dead guy I never met on my printer, regardless of whether or not it is in a place that will show in the finished product. So I went into the stepfile and removed that…
Very similar to https://www.thingiverse.com/thing:5752277 , but I made it fusion so it is editable. Mostly a byproduct of the double slab project but without the “widening” that is required for that one. The fusion file is a copy of the…
This is the print cooling duct that came default with your Tronxy Crux1's gcode turned into stl. Smaller layer heights is recommended and also a filament that withstands higher temperatures + wear and tear since you will be screwing into…
A simple charging station design with an opening below. By default, the opening is designed for PinePower or something smaller than its size, but you can customize the dimensions by downloading the OpenSCAD source. You can also adjust the…
Nothing special here. Just print this using conventional TPU-filament.
A pedestal for a 1:50 scale model of Blender default cube (a 40x40x40mm cube). Cube STL also included :).
These magnetic soft jaws are designed to protect delicate workpieces in a drill press vice, improving grip while preventing damage. They snap firmly into place using embedded magnets for quick install and removal. There is one jaw face…
DEFA Wandmontage Kabelhalter
Easy print with no support needed.
This is designed for the Knomi V2. there is a spot to run a usb cable to the knomi but will will have to be right angled and very thin to fit. I used the 5v and GND from the old display ports that i am no longer using
Slight remix to a design i found on youtube by user DCL. Made to fit standard OR upgraded metal dual gear extruder like mine.
Default model is 26mm outer, 10mm inner. SRC file is included, adjust the parameters to your needs. Height can be adjusted manually. You basically want them to be a bit smaller than your bearing so that it fits tight.
I got sick of waiting for @NotValve to release the cad files so I scanned the head strap. Scanning the actual compute module is much more difficult due to it being made of shiny, black, smooth, featureless, ir transparent plastic. Also…
this is for defa charging/heating cable to mount on 60mm pipe
This is a custom mount for installing the BTT Eddy probe on the Elegoo Neptune 4 Pro in the same location as the stock bed probe. Other available mounts I tried either reduced the probe’s usable scanning area or clashed with Elegoo’s…
Bracket to mount a DEFA car heater with a single bolt, e.g. to a steel grid. Fits the DEFA bracket with wood screws and a 8mm bolt in the center hole. I mounted it to a steel grid in the back of my wifes pickup with a 50mm square shim and…
For use with 25.4mm tubing version of LowRider2 CNC router This is nearly identical to DNA's awesome remix found here: https://www.thingiverse.com/thing:5236620 of Ryan's (of V1 Engineering) XZ design with the exception that I reverted…
Car heater cord holder for a 60mm pole. Should work with Defa and Calix cords. In the picture i am using a calix cord. Printed with white ABS, which shrunk a bit but the fit was still pretty good. I used some random screws and bolts with…
Nearly ‘invisible’ cover to make the ugly default feet of the Ikea Besta line of furniture dissapear. The height worked for all my uses but you might have to cut it down abit incase you have turned the feet down all the way.
I needed an xLCD for my CORE One Mini Project to visualize properly in CAD - the original injection-molded cover in the official CAD model did not have any patterns or writing on it, so i've recreated this. While doing so, i figured: why…
onshape model Please download here as well so I get credit prusameter even though it's mostly through onshape Instructions: 1) open onshape model and make a copy of the workspace 2) open the “name” part studio a) double click on the…
Ever wondered what would happen if two Blender icons—“The Default Cube” and “Suzanne the Monkey”—had a baby? Probably not… But I bet it would look a lot like The Simia Creativa—a creative pixel pal with a handy monkey tail 🐒 that can hold…
Universal Cap D.19mm default dimension TH.0.6mm. designed to cap the Floor coat hanger metal ends you can scale to use it in multiple scenario, and if you print it in TPU 70A, you can use as end protection
Forword: I am really bad at 3D modeling. That spaghetti-tree of garbage you're about to witness if you're good at FreeCAD? It works. That's all I can say. I did a lot of redundant things I'll get better at later. The main goal of this…
Hello guys, I would like to introduce to you my new model. It is Default_Roblox_Character. I hope you will enjoy it. Support needed, as you can see in the picture. If you will have any trouble, write me and maybe i will figure it out :D.…
The Utopia Bike I purchased came with four hex wrenches: 2.5mm, 3mm, 5mm, and 6mm . To keep these tools organized, I designed a simple holder for them. After adding a water bottle cage , a rear rack , and some different pedals, I created…
Different sizes of supports and forms for plants that uses a ⦰1cm rod. The clamp system and the opening in the front allows to easily install the support to the plant. The clamps are designed to be stackable. This allows to have multiple…
This is for the default internal spool mount in the prusa enclosure kit to prevent the spool from sliding and possibly colliding with the extruder assembly It can be split and glued together or it can be printed as is and then inserted by…
This plug will insulate three AC connectors in the DEFA plug.
Robot Vac Skirt Extender For Model: Hoover Performer Plus Author: Brian Khuu 2019 This ensures it doesn't go over carpets or doorstops if needed. This is mounted via M4 screws in the Hoover Performer Plus Print instructions Category:…
Box for MIDI Thru 2input -> 10out splitter PCB Diagonal oriented fits MK4S print area 250 x 210 mm https://deftaudio.com/store/tproduct/823081731212-midi-thru-2input-gt-10out-splitter-pcb-o
My printer was built around 10 mm steel thick frame. So the standard spool holder is insufficient and I had it printed already. So I designed this to accomodate the spool holder for standard 6 mm thick holder. Snaps on the frame and then…
Since I couldn't find the correct direct extruder drive file for the stock Ender parts, I had to create it myself. This fixed the threading issue for me. The previous models I found were slightly offset, causing the connectors to be…
Ein Gegengewicht für Defa-Stecker Halter Montage: Zwei Kabelbinder (max. 4mm breite) durch die Schlitze stecken und mit dem Defa-Stecker verklemmen. Anwendungsbeispiel: Aufhängen des Defa-Steckers an einem Seil
so this was made by chatGPT with this photo i borrowed off reddit . the photo is for what its supposed to look like
Takes around 9-10 rolls on my settings which is around $100 if you get 10packs on amazon. My goal is to get this ramp mass produced to be able to sell it for what a hq 4s battery cost. Thanks in advance for your support. Any questions…
the well known infamous glove from slap battles is now usable in real life and you can play sb in real life now! (not made by me btw)
My printer was built around 10 mm steel thick frame. So the standard spool holder is insufficient and I had it printed already. So I designed this to accomodate the spool holder for standard 6 mm thick holder. Snaps on the frame and then…
This is the standard fan duct (Bottom Horns, as mentioned on the EVA site) with mounting holes for the Beacon Eddy Current Surface Scanner Rev H. Updated the height of the mounting platform to allow for the recommended 2.6 mm clearance…
This is the print cooling duct that came default with your Tronxy Crux1's gcode turned into stl. Smaller layer heights is recommended and also a filament that withstands higher temperatures + wear and tear since you will be screwing into…
Takes around 9-10 rolls on my settings which is around $100 if you get 10packs on amazon. My goal is to get this ramp mass produced to be able to sell it for what a hq 4s battery cost. Thanks in advance for your support. Any questions…
![Fairphone 4 Rearcover [default]](https://media.printables.com/media/prints/564339/images/4520460_dbca6ec0-fc2f-4951-9e65-fc25b66dcd1d/2023-08-26_17-34-31.jpg)
![[UPDATED] Camera Hood for Panasonic Lumix micro 4/3 default lens H-FS12032](https://media.printables.com/media/prints/43365/images/431083_7c6d97a4-327e-417d-b5ff-e75166a1d827/large_display_camerahood12-32_g2_v2_43365.png)
