Liczymy pasujące modele…
A detailed dice tower that can serve as a decorative diorama on its own. Prints completely support free. Happy printing! :) You're welcome to visit our shop at https://arsmoriendi3d.com/ Print instructions Print with your preferred…
Wydruk około 18,73 €–22,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)
Wydruk około 6,74 €–8,24 € nettoWstępna wycena jednego wariantu
Hinge for the Audio-Technica ATH-M40x. I tried out the version from thingiverse ( https://www.thingiverse.com/thing:2823187 ), but I thought it didn't fit well so I recreated one myself. I think it works well! Made a left and right version.
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
Standard DIN - Car Radio Dash pocket. Fusion 360 files for your customization/modification, as many cars and trucks dash varies. Print with PETG or ABS to handle summer car interior heat.
Wydruk około 11,98 €–14,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
With these holders, the wall of a mini photo studio flows smoothly to the bottom. Suitable for A4 to A0 paper, thin cardboard. The left and right holder are the same. 1 screen holder is 17 cm high, 17 cm wide and 2 cm thick, making it…
Wydruk około 6,97 €–8,52 € nettoWstępna wycena jednego wariantu
Woman | Girl | Fitness | Runner | Architectural figurines | People | Model Woman with long hair in sport clothes. She is suitable for 3D models of nature, spring, summer and autumn city. Printable for the most common scales (with girl…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
For all kinds of sheets. Also thicker ones.
Wydruk około 2,49 €–3,04 € nettoWstępna wycena jednego wariantu
I wanted a simple solution for a photo studio lightbox that could be stored with minimal space. Had the idea of using 3mm K-Line sheets and printing some parts to keep them together in a square. Printing All the pieces were printed in…
Wydruk około 4,55 €–5,57 € nettoWstępna wycena jednego wariantu
Miniature woman for your diorama, architectural miniature or as a figurine. Woman | Girl | Tourist | Architectural figurines | People | Model Woman with long hair wearing jacket, pants, hiking boots and backpack. She is suitable for 3D…
Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu
Man | Businessman | Architectural figurines | People | Person The businessman is suitable for 3D models of city or architectural diorama. Printable for the most common scales (with photographer height 185 cm): 1/12 scale: 154.2 mm 1/24…
Wydruk około 1,01 €–1,24 € nettoWstępna wycena jednego wariantu
Print lying on back with front upwards.
Wydruk około 2,26 €–2,76 € nettoWstępna wycena jednego wariantu
Cockpit Kit: Freewing Models R/C 90mm EDF F-18c Hornet This is a 1/11th scale cockpit kit designed for the 90mm EDF Freewing F-18C Hornet Fighter Jet. Included are the STL Files, a printed parts list, detail photos for painting, assembly…
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
Miniature girl for your diorama, architectural miniature or as a figurine. Woman | Girl | Student | Tourist | Architectural figurines | People | Model Girl with long hair wearing jacket, pants with pockets, hiking boots and backpack. She…
Wydruk około 0,93 €–1,14 € nettoWstępna wycena jednego wariantu
These are shrunk-down files of a brick wall to 1/10 scale. These were used for the outside of a scale diorama garage. The parts interlock, so you can extend the shape to fit any project. Easy to cut as well. I used Hatchbox “brick” PLA.…
Wydruk około 3,61 €–4,42 € nettoWstępna wycena jednego wariantu
The housing was made for the AI-Thinker ESP32 Audio Kit V2.2 A405 (but should fit for the other variants of the V2.2 kit too). SD slot, USB connectors, audio jacks, both MICs, the LEDs and all pushbuttons are accessible. The RESET and…
Wydruk około 2,47 €–3,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Miniature woman for your diorama, architectural miniature or as a figurine. Woman | Girl | Tourist | Soldier | Architectural figurines | People | Model Woman with long hair wearing jacket, pants, hiking boots and backpack. She is suitable…
Wydruk około 0,91 €–1,12 € nettoWstępna wycena jednego wariantu
Change Log V3 Lower light bolt hole moved forward to allow for greater range of motion for lower light Reinforced the slot in the frame that interfaces with the lower headlight mount of the headlight mask. V2 Overhangs improved for more…
Wydruk około 9,61 €–11,74 € nettoWstępna wycena jednego wariantu
Protection For Radiomaster BOXER Controller Gimbals
Wydruk około 2,61 €–3,19 € nettoWstępna wycena jednego wariantu
Minimalistic replacement for the tiny piece of plastic that holds each earcup of Audio Technica ATH-M50X headphones in place. Note: it's more rigid than the original solution, so headphones are not going to fold as nicely anymore. What…
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
Radioactive Nuclear symbol Fallout. Diameter : 98 mm. 1 mm for the yellow part, 1 mm for the black part.
Wydruk około 1,40 €–1,71 € nettoWstępna wycena jednego wariantu
Audio cassette box. (Obal na běžnou audiokazetu.) Print instructions =EN======== Audio cassette box. Like the original box. Used thicker walls for better coherence. If you want an original size, print 99% size. I think, nozzle 0.4 is…
Wydruk około 2,73 €–3,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This tiny housing for the seed studio xiao esp32 s3 sense is TINY! I didn't find a mounting option I liked, so I made my own. Features: Magnetic base: Use a 14mm round magnet to attach the foot anywhere on your printer SD card is easily…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a fixed belt clip for the Baofeng UV-9R radio that is compatible with MOLLE/PALS webbing. The original clip is a rotating design that isn't suitable for some applications . This clip snaps over the lanyard attachment on top and…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Miniature accessory | Miniature | Diorama | Miniature Scene Customize the dimensions for your miniatures. I look forward to seeing your work with them. Have a happy printing time 💛
Wydruk około 0,51 €–0,62 € nettoWstępna wycena jednego wariantu
Handy holder for a portable radio. Suitable for older cars where you are not afraid to screw.
Wydruk około 2,00 €–2,45 € nettoWstępna wycena jednego wariantu
The xBloom Studio has a groove on top that allows for holding a phone. I found that it didn't quite hold my case-less iPhone securely enough. The phone would frequently slip out and fall flat, especially when using the grinder. This phone…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu
This is a remake of the MattHub mount for the Bigscreen Beyond audio strap. The mount backplate is nearly identical to the one bundled with the hub, but my remake features 1.85mm holes instead of 2mm for a stronger fit with undersized…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
This is remix of Stamos fantastic Hifiberry Case . The original model was modified as follows dimensions were adjusted to IQaudio DAC Pro High-Fidelity-Audio-Output-HAT the case was extended in height to allow using the GPIO pins a hole…
Wydruk około 5,66 €–6,92 € nettoWstępna wycena jednego wariantu
As a holiday gift the family is going to Universal Studios, but I needed a token to give them. Hence, this print of the Universal Studios logo. There were a couple up already but none I saw that worked for multicolor. This was made from a…
Wydruk około 6,44 €–7,87 € nettoWstępna wycena jednego wariantu
This file is a more rigid servo arm for the Rancher. The Rancher itself is NOT part of this assembly! If you want to print the Rancher, you will need files from third party as well. Files can be found at 3dsets.com. The Rancher has 4x4…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Description Riser for Apple Studio Display with extra storage space under. Highlights: Height adjustment on the Studio Display is very expensive, save some money with this riser. I've included different heights to fit your needs. Print…
Wydruk około 12,61 €–15,41 € nettoWstępna wycena jednego wariantu
This 3D enclosure is designed to securely house the Seed Studio XIAO ESP32S3 Sense, providing both protection and easy access to key components. The compact case ensures a snug fit while leaving essential ports and sensors exposed for…
Wydruk około 0,52 €–0,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The UV-5R Radio is a fun item to have around… but it always seems to be falling over. This stand will help keep it upright and stable. The pocket has ribs that engage the battery slots nicely to hold it snugly. You can use 2-sided tape if…
Wydruk około 3,21 €–3,92 € nettoWstępna wycena jednego wariantu
These are footswitch topper for your Fractal Audio Modeller. They provide a tight fit and make it much more convenient to use your device barefoot or to switch presets with your hands. ---- Did you like my print? If yes please rate it ❤️…
Wydruk około 0,76 €–0,93 € nettoWstępna wycena jednego wariantu
Their are 2mm holes for glueing a 2mm wire at the back of the welding machine and in each tool lead. Use a 2mm metal wire into the hole for the electrode. Print welding leads upright with a brim (see gcode file).
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
I made these brackets for the xtrons PX7439BL radio because the supplied radio brackets did not fit very well. Printed from ASA for heat resistance and strength. No need to buy additional screws or nuts, just the original BMW radio screws…
Wydruk około 1,74 €–2,13 € nettoWstępna wycena jednego wariantu
Perfect for turning a tab-out cassette into a tab-in cassette for recording purposes. These tabs easily click in and click out and can be used over and over again.
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
Another Audioengine A2+ Speaker Stand. This one features options for multiple angles for optimal listening experience. Print on the side for a nicer surface. Includes insets on the bottom for anti-slip rubber feet with a diameter of 10mm.
Wydruk około 5,46 €–6,67 € nettoWstępna wycena jednego wariantu
Hi everyone! I was very underwhelmed from the default Quest 3 Audio. Firstly I went with the DAS Mod, but found the strap to be uncomfortable, especially with glasses. I decided to modify my KOSS Porta Pro headphones and make them fit to…
Wydruk około 0,37 €–0,46 € nettoWstępna wycena jednego wariantu
Designed a 3D model of the ATH-M40x/50x Earcups in Fusion 360 to be printed and allows you to customize your headphones. In my design, I have removed the locking mechanism for the 2.5mm cable as the cable holds very tightly even without…
Wydruk około 8,95 €–10,94 € nettoWstępna wycena jednego wariantu
Manufacturing instructions: Material: PETG 3D Printer: FDM 3D printer, average print time 1h 45m (input shaper enabled on MK4). Slicer settings: 0.2mm layer height, 5 perimeters Post processing instructions: Clean stringing, install in…
Wydruk około 2,10 €–2,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I need a place to mount my HT and speaker mic and had a ram mount system I could use.
Wydruk około 0,58 €–0,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Relive the nostalgia of the iconic Pokémon battle that started it all with this detailed diorama of Nidorino vs. Gengar! Capturing the intense face-off from the legendary Pokémon Red & Blue intro, this piece brings the battle to life with…
Wydruk około 1,66 €–2,02 € nettoWstępna wycena jednego wariantu
I havce modified the Rames The Generic XIAO Sense Case (Seeed Studio XIAO ESP32S3 Sense, Camera) mount to be compatable with Michal Fanta 's Articulated arm.
Wydruk około 0,40 €–0,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Credit to original creator: https://www.thingiverse.com/thing:5206053
Wydruk około 2,42 €–2,95 € nettoWstępna wycena jednego wariantu
Easy to make a cute Cat with Radio keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
printed in PLA, probably could be printed in TPU as well. Try printing without support.
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed No Brim needed Scale it as you like :)
Wydruk około 7,92 €–9,68 € nettoWstępna wycena jednego wariantu
Radiomaster Zorro 18650 addon backplate holster mod. 2s2p 18650 to add your zorro battery capacity. Radiomaster Zorro lacks battery capacity. This helps a lot. You can glue the JST connector to this and make short balance lead.
Wydruk około 2,26 €–2,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Design These are designed to be compatible with the official Kato N gauge diorama kits 28-889 Kato UniTrack Diorama R183 & 28-888 Kato UniTrack Diorama S124 Straight Kit As used in the Kato Dioramacircus. These models offer support for…
Wydruk około 2,96 €–3,62 € nettoWstępna wycena jednego wariantu
I had a heck of a time trying to find an extruder indicator that will work with my new V3 SE. The few that were out there did not give me what I wanted. So, I took the good work of Toni H and updated it to work with the new extruders that…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
I wanted to make a small case that protected the Xiao while also making things look a little cleaner. This is the smallest possible case I'm personally able to design and it snaps together pretty easily (though it is a tight fit). I…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hello, I have the Perfect Family for your diorama or model railway. The figures are now in 1:15 scale. Here is the conversion for model railways, so you know how to adjust the scale: Scale Reduction Approximate height of the figure (cm) G…
Wydruk około 9,09 €–11,11 € nettoWstępna wycena jednego wariantu
Für den Bau des Radios werden folgende Komponenten benötigt: Raspberry Pi Raspberry Touchscreen Rotary Encoder ( https://www.amazon.de/dp/B07T3672VK?ref=ppx_pop_mob_ap_share) Lautsprecher…
Wydruk około 4,83 €–5,91 € nettoWstępna wycena jednego wariantu
A magnetic mount to adapt Peak Design's Mobile Case to an Apple Studio Display for use with Reincubate Camo or macOS Ventura's forthcoming Continuity Camera feature. Requires 4x 10mm x 3mm refrigerator magnets and a suitable pause at the…
Wydruk około 3,01 €–3,67 € nettoWstępna wycena jednego wariantu
I designed a low profile mic stand for the Audio Technica AT2020 microphone which can easily be placed somewhere else when not in use. This was specifically made for the Ikea Bekant desk, with a thickness of 17mm. The STEP file for the…
Wydruk około 3,57 €–4,37 € nettoWstępna wycena jednego wariantu
Stand for Withings Body Cardio Scale and BODY+ (upright position) For reasons I needed an upright stand for my Withings Body Cardio (and BODY+) in the bathroom. With this stand I safely can stow the scale in an upright position when not…
Wydruk około 7,95 €–9,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made a mobile phone holder for the CD slot for the original KIA radio, the holder is equipped with a 17mm ball to install any holder that supports this system. the back of the holder itself should be covered with self-adhesive…
Wydruk około 1,29 €–1,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
3 versions du support : Simple Avec attaches câble et encoches format USB type C Avec attaches câble et encoches format USB type C bicolor 2 coussins différents. Le coussin est à imprimer en FLEX/TPU/TPE de préférence Le mors de la vis de…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
This is the core of a variometer (also called a vario coupler) used in radios from crystal type to the early vacuum tube radios. I strongly recommend using a filament with no pigment, as many pigments interfere with RF signals. Print…
Wydruk około 0,69 €–0,84 € nettoWstępna wycena jednego wariantu
For it to work you will need: 4x segment display max7219 4x ec11 encoder arduino Uno or Mega a pair of wires
Wydruk około 1,08 €–1,32 € nettoWstępna wycena jednego wariantu
Stützen sind erforderlich. Supports are required.
Wydruk około 3,06 €–3,74 € nettoWstępna wycena jednego wariantu
PETG was used since this will be exposed to the weather. No supports are needed, and a color change is included in the .gcode file. The FreeCAD 1.1 file is included if other fonts or wording changes are desired.
Wydruk około 0,87 €–1,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Bulkhead inlet mount for 2 SO-239 Connectors with the flanges. making this for a friend who was putting his HF radio into one of those black plastic Harbor Freight Tools brand protective carry suitcase.…
Wydruk około 1,01 €–1,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Openframe.stl is frame only (~2 hrs to print). You just cut cardboard back the outersize of frame and glue to frame. You can then paste your license print to the cardboard and there you have it using minimal filament (pla) hamlicense…
Wydruk około 4,96 €–6,07 € nettoWstępna wycena jednego wariantu
A simple wire former for building inductors such as those used in a T-match antenna tuner
Wydruk około 3,63 €–4,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A protector for the apple lightning to headphone jack dongle. Current versions are designed to fit iPhone 8 plus with OtterBox SYMMETRY case, and iPhone 8 plus without case. May need redesign for different phones and cases. Print…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
Needed a mounting bracket for a friends car mobile radio so made in onshape. M4 screws for everything I printed in PetG, Polymake PolyLite. Print it on its face.
Wydruk około 0,90 €–1,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model represents a realistic H0 scale parking bollard / car park barrier , designed for use on model railway layouts, urban scenes, parking areas, streets and dioramas . The shape and proportions are inspired by common European…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
This is designed to fit this frame: And fit over my GPS mount rev 2
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
This is a control knob for attachment to a control spindle. It carries a pointer on an outer skirt. The back of the knob is recessed to allow for a thin control fixing nut so that the skirt can be very close to the panel. The knob is…
Wydruk około 0,56 €–0,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Made for tealight with a diameter of 3.95mm. Suitable for LED tealights as well as real candles. Print one of the “lower” and one of the “upper” They fit quite nicely together. The lampshade has to be rotated 180 degrees. So the smaller…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena jednego wariantu
The Elecraft KH1 HF radio comes with a 2600mAh battery which is huge capacity for that radio that would for four or five activations easily with that QRP radio. If you are only going out for a single activation or two a smaller battery is…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ho maggiorato a mio piacimento il modello originale secondo l'utilizzo
Wydruk około 13,75 €–16,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Show off your custom Marvel Studios logo if your name is Brian. color swaps out at 3.2mm The custom Gcode includes the color change and adds mouse ears to keep the sign adhered to the bed.
Wydruk około 4,46 €–5,45 € nettoWstępna wycena jednego wariantu
support - yes infill - 15% build plate adhesion - not necessary
Wydruk około 1,65 €–2,02 € nettoWstępna wycena jednego wariantu
Another holder for remote control Download -> Share -> Print -> Rate -> Donate -> Enjoy -> Thank you Created for printing without supports Print instructions Model is created for ELKO - LARA radio/intercom REMOTE CONTROL .gcode is created…
Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu
Maximize your receiver setup with a one-of-a-kind 3D print. Engineered for precision and flair, The Audio Mount Pro is a must-try print for enthusiasts! Introducing the Audio Mount Pro, a remarkable 3D printed solution for mounting up to…
Wydruk około 3,32 €–4,05 € nettoWstępna wycena jednego wariantu
To get the structure on the print I used the fuzzy print setting in Prusa Slicer with its default setting.
Wydruk około 0,42 €–0,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dieser kompakte Tag dient zur schnellen und eindeutigen Kennzeichnung von Motorola MTP3550 Funkgeräten. Er wird einfach über die Antenne geschoben und am Clip-Halter fixiert. Ideal für Feuerwehren, Rettungsdienste und Hilfsorganisationen,…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
I printed Diogenes in TPU and the hammer head in PLA. I used a wood dowel rod to make the hammer handle. With some modification, I'm sure you could also print everything in PLA. The model was painted with acrylic paint.
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
Summary: This is a model of a mountain climber climbing a mountain. The model is print-in-place with no assembly. Print Settings: Layer height: .20mm Supports: Organic supports are needed only on the build plate Skirt, Brim, Raft: No…
Wydruk około 3,05 €–3,73 € nettoWstępna wycena jednego wariantu
Achtung Akkugröße!! nur für 1950mAh Akkus !!NICHT für 2200mAH Akkus!! Dieses Modell ermöglicht es, das Motorola MTP3550 (und baugleiche Modelle) sicher und griffbereit im Auto zu verstauen. Der Adapter nutzt den vorhandenen Getränkehalter…
Wydruk około 2,25 €–2,74 € nettoWstępna wycena jednego wariantu
This is a extremely simple Shiit wallmount specially for the new Rekkr AMP, but since the Shiit Modi and many other devices have nearly the exact same measurements they should fit also. As this one was specially made for the Rekkr it is…
Wydruk około 4,67 €–5,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hallo, mein erstes Modell (über FreeCAD) hier. Es ist entstanden aus der Notwendigkeit heraus, nach einem unglücklichen Zwischenfall, einen der seitlichen Griffe vom ION Audio Block Rocker M5 Bluetooth zu reparieren. Zumindest schien mir…
Wydruk około 8,34 €–10,20 € nettoWstępna wycena jednego wariantu
Printed on a XL, but could be divided into two parts and be printed separately. I sliced it with 0.15mm. I glued the strips on the laptop with strong double sided sticker tape (for phone screens).
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
black PLA was used base at bottom is squared off for attachment to RC
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Did you break a battery cover? Do you have a 3D printer, some time and hate to use a PVC tape to hold the batteries? You see where I'm going with this. Sorry but no picture, as I already sold the radios.…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
I've been using the Seeed Studio ATX PSU breakout board for a while now and nearly had an incident by leaving the board floating around the desk with lots of metal bits around. I decided to make a simple cover for the bottom to prevent…
Wydruk około 1,84 €–2,25 € nettoWstępna wycena jednego wariantu
Built in camera of display is not covered. I used the slicer to make an additional slot for buttons on the left side of the phone. See images.
Wydruk około 1,58 €–1,93 € nettoWstępna wycena jednego wariantu
This is a mount designed for the Hamamatsu C10508-01 Avalanche Photodiode (APD) module . The purpose of the mount is twofold: 1) to enable the integration of the APD module into optomechanical setups; and 2) to provide a protective cover…
Wydruk około 2,20 €–2,68 € nettoWstępna wycena jednego wariantu
Reportážní/studiová kamera na stativu v měřítku 1/10. Slouží jako doplněk třeba k RC závodům. Model je rozdělen na tři díly (kamera, spojka, 3x noha) nohy se přidělávají šrouby M3*9mm. Kamera a spojka mají spoj určený k lepení.
Wydruk około 3,25 €–3,97 € nettoWstępna wycena jednego wariantu
The best way to mount up to 2 URX-P40 Sony audio receivers both facing the cameraman, very useful to monitor the battery and audio levels.
Wydruk około 1,85 €–2,26 € nettoWstępna wycena jednego wariantu
The Eurochron EFBU811 radio controlled clock from Conrad Electronic is usually attached to smooth surfaces with a suction cup on its backside. The plastic screw broke so I decided to make a self standing housing. The clock can be just…
Wydruk około 2,86 €–3,50 € nettoWstępna wycena jednego wariantu
Seeed Studio ESP32C6 + HiLetgo MAX98357 + CQRobot Speaker Case Dimensions: Speaker - https://mans.io/item/cqrobot/cqrlb4o3w-b Amplifier - https://www.adafruit.com/product/3006 ESP32C6 - https://www.espboards.dev/esp32/xiao-esp32c6/ No…
Wydruk około 0,92 €–1,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Una solución sencilla para repetir redondeos de esquina en piezas de madera utilizando una plantilla impresa en 3D. La HF-CT-005 incluye 9 plantillas, cada una con un radio diferente: 10 / 20 / 25 / 30 / 35 / 40 / 50 / 60 / 75 mm La…
Wydruk około 3,21 €–3,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This stand is specifically crafted to hold your Mark Twain Radio securely, keeping it elevated and easily accessible in any room.
Wydruk około 7,73 €–9,45 € nettoWstępna wycena jednego wariantu
Radio Flyer Folding Trike Compatible Rear Tire (Right Hand Side, mirrorable) Specs: ID: 7/16" OD: 6.5" Print Settings: Walls: 5 Infill: 15% Cubic
Wydruk około 24,19 €–29,56 € nettoWstępna wycena jednego wariantu
Here is gathered Hyrule’s bloody history of greed and hatred. From the... honestly, messed up location in The Legend of Zelda: Ocarina of Time , here is childhood trauma originator: The Shadow Temple 💀 🟪 This is the first MiniWorld3D…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Cover for Shiit Valhalla Tubes Protect your tubes from dust or against damage Advice: Use only when tubes are cold Designed in Autodesk Fuson 360 Print instructions For print used PM Black PETG Advice use PETG, ASA, ABS or PC as Tubes…
Wydruk około 3,21 €–3,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
