342 modeli
Under table cradle for Dell WD15 docking station - we needed a way to mount it near the cable opening in the meeting room so that the cable is maximally long. This screws in right beside it with easy access to the plugs for cables. Use…
It is a MagSafe docking for iPhone 12(all series) and Apple Watch. Need M3 x 6mm (4pcs) or M3 x 8mm (4pcs) for connect the upper and lower parts.
I customized the base of the original model by @Rocky00780 from MakerWorld to fit the base of the OLED-Switch.
Created a mount to have the HP docking station mounted under a desk. As HP have several products called “HP G4”, this model is for the HP G4 Thunderbolt dock. The dimensions of the dock are 98 x 98 x 68 mm I printed this with PLA as I…
Docking/Charging station for Galaxy Watch 7 chargers with USB-C cable. This stand allows you to charge your watch with the band closed—simply place it on the dock, and charging starts automatically. No need to remove or adjust the…
Update 2022-01-16 Making Of Video with FX: Parts for my Death Star Bay 327 Diorama. I build this to show my Star Wars Spaceship Models in the right place. The base case is made from 10mm waterproof plywood. Lighted Spacedoor ring i cut…
For those who have the HP G5 docking station and want to clean up your work area a little, this is the perfect print for you! The VESA pattern is for 75 and 100 mm spacing. I used a spacing plate from Icy Box to mount the dock directly…
Just a simple Steamdeck stand. Behind fits a Anker 8in1 hub . Printed with Ender5 plus und it works just fine. No Support . Gcode ist for Ender5 with PLA and 0.20
Print in place, no supports needed. Settings: 0.2mm layers, 2 perimeters, 10% infill(Higher if you want it to be a bit heavier. Seems to the back for a cleaner look. The wire slot is made specifically for the included cable and may not…
This model is specifically for the DELL WD19, WD22, K20A USB-C Thunderbolt Docking Stations (all have the same 9cm deep x 2.9cm height case) and allows the dock to be clamped to the edge of a desk and hide all the associated cables. I…
i wanted a holder for my Xiaomi Mi vacuum cleaner Mini where i can not only store the device an the nozzles but also charge it. I found some good designs here but not the one that combine all these features in one single holder. So i came…
Here it is y’all the 3D printed Nintendo Switch Docking Case MKII You will need a 3D Printer capable of printing a part that is 270x136x105mm You will need the following supplies: - 0.5 x 4 x 15mm Compression Springs (QTY.5) - Music Wire…
This a toothbrush holder, with a clip-on cup for your toothpaste or other dental care items! https://www.youtube.com/watch?v=1_B7hOsRv6M 4 different sizes, each holding 1-4 brushes and you can choose between the wall mounted option, or…
English below / Englisch unten Diese stylische Dockingstation ist speziell für das iPhone 17 Pro Max konzipiert und passt perfekt auch mit der RhinoShield MagSafe Mod NX Hülle. Der hintere Bereich ist so gestaltet, dass deine Apple Watch…
The charger supplied with the Samsung Galaxy Watch 4 is a simple one. So I decided to create an elegant stand to support it. For the best result use a layer height of ≤ 0.12mm. Two version of the stand are provided : Single : One piece,…
Here it is, the 3D printed Nintendo Switch Docking Case MKIII. In this update I cut the base into separate pieces so the whole case can be printed on smaller format printers. All parts are printable on Prusa i3 and ender3 sized printers.…
A personal laptop stand that can stand upright or lie flat . I found it useful and wanted to share it with everyone. Desks are often cluttered by computers, and when this stand is used vertically, it can make your desk tidier and free up…
This mount attaches to the USB C connector of a Dell docking station. It keeps the connector a specific height which relieve stress on laptop USB C port caused by bending of the connector. This is designed for Dell WD19 docking station.…
SENA Docking Station for 50S & 30k. Others could work but I'm not sure Fot the 30k you have to put in a micro USB cable for the 50S you need a USB C cable.
A little bench / Docking station for your Flipper Zero, with build in space for your USB cable to charge it Print on its side, so you don't need support, infill is not needed
A quick model i did for a friend, a dual watch 5/6 and phone stand. They insisted on using a cable instead of a wireless charger, so here it is.
Howdy everyone! This is a basic little mount to attach your Dell Docking station to the bottom of your desk. Basically, screw the mount using your screws of choice (I prefer #6 - ¾"), use 2.5mm x 12mm screws to mount the locking tabs to…
International Docking System Standard (IDSS) Interface Definition Document (IDD) Rev E establishes a standard docking interface to enable on-orbit crew rescue operations and joint collaborative endeavors utilizing different spacecraft.…
i print this in PLA you can print this with any materiel will need supports when printing i did 25% infill
I added countersunk holes for the VESA mounting screws. Also a 10mm 2.5M screw are needed for mounting the dock.
Wall-Mounted Laptop Docking Station (Slide-In) Upgrade your desk setup with this space-saving, wall-mounted laptop holder. Designed for seamless docking, it features a side-loading track that guides your laptop straight into place. Once…
Sturdy stand for Amazfit T-Rex v1 smartwatch or watch with similar charger type. Use supports only under cable guide, preferably organic
!!!ATTENTION!!! XD if you want a nearly Life size Version with better proportions, please look here . I create a small Sonic Screwdriver Stand wich look like the Data Port aka Docking Port from the TARDIS. This is a small Version of the…
You can hide the Lenovo docking station under the desk with these mounts and remove it again in no time. The two triangular brackets are screwed under the table near the edge, using 3mm screws. The two holders are slid over the docking…
Say hello to our latest HB0609! The HB0609 will be shipped together with a DOCK BASE compatible with ROG Ally X, ROG Ally, Steam Deck, Steam Deck OLED, and Legion Go handhelds. The HB0609 features a replaceable acrylic sheet where you can…
Designed for WD MyPassport 2.5 External Harddisk, Hold up to 7x for storage OR 4x for hdd farming. Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: Esun ABS Red Category: Computer
Clip to mount a Dell docking station on the underside of a desk. Fits WD19DCS and models with the same form factor.
Should print with no supports. See remixed changes below.
If you have a Razer Viper Ultimate with the docking station you probably have or had this issue where the mouse just won't charge properly. The mouse always shifts a tiny bit down which prevents the mouse from charging most of the time. I…
While im created the Sonic Screwdriver Stand i thought by me "i need it in Life size!" and here it is ;) As references i used i lot of Pictures, in different views, from various Episode...to create a "So acurate looking as possible"…
This model is used to hold the Transformers Titan Nemesis horizontally in ship mode without needing to split the bottom fin. I designed it to allow the base with symbol to be printed with separate colors in layers, or to have the symbol…
Other mounting solutions I found did not fit mine. Probably Dell changes dimensions frequently. Better measure dimensions of your docking station before printing this. 😉
Special thanks for CWempe for modelling the docking station itself. Link to their version of the bracket Under table cradle for Dell WD15 docking station - we needed a way to stick it near the cable opening in the meeting room so that the…
About This design allows you to mount a Dell docking station (WD15, WD19 or WD22) to a Dell P3421W monitor. You can either use no additional hardware or the official Dell Docking Station Mounting Kit to do so. BOM (Always) For the…
The ASUS ROG Ally is a bit too thick to fit securely in a Steam Deck Docking Station. This adapter fits around dock, so that it has a larger front edge to comfortably hold on to the ROG Ally. A Steam Deck will still fit into the dock as…
DEUTSCH: Das ist eine Docking Station, ein Kapselaufbewahrerhalter und eine Befüll Station für die Dosierkapseln für den Norddampf Relict Vaporizer entwickelt. Die Befüll Station kann jedoch mit jeder Dosierkapsel mit dem Durchmesser von…
This model allows you to place your notebook on top of the docking station. Fits perfectly on the Dell K20A, maybe other. All ports are available and the air vents of the docking station as well as of the notebook are completely free. The…
This is a support block for a Dell USB-C docking cable with a Dell Precision 5540 laptop. Tested with Dell WD19 and K17A USB-C docking stations. The block prevents downward strain on the USB-C cable, reducing stress on the USB-C port in…
ZigZag Apple Watch Charging Dock With Wider USB Hole & Removal Hole Print Settings Printer: Flsun QQ-S Pro Rafts: No Supports: No Infill: 35-60 Filament: PLA
I created this thing to have my Dell WD 19 DC Docking station removed from my desk to free up some space. The vertical mount allows you to adhere the dock in a vertical position to basically everything. In my case my desks cabinet. You…
Model for the dock can be found here: Dell WD19 Docking Station STEP The dock can be mounted in any orientation. Be careful, the holder halves are mirrored and you cannot simply 3D print the same file twice. Credit: docking station Dell…
Using a wavlink dual display docking station? Messy cables from the dual display, keyboard, mouse, ethernet, power supply cramping your style? Need a quick solution and don't want to spend time designing simple stuff? Then please feel…
Designed for Philips OneBlade QP1924, other "first shave" or "intimate" models should also fit. Cable goes in tight but it does, also it doesn't come out. (make sure its the right direction)
Bracket for fixing the Xiaomi Mi Robot Vacuum Mop Pro Docking Station to the wall. When the Xiaomi vacuum cleaner does its job, sometimes it moves the docking station. This bracket holds the docking station in place. It can be fixed to…
Der Fix, wird einfach in die linke Fahrspur geklemmt. Er erhöht die Spur um ca. 2mm, so das der kleine Seitenmob nicht mehr an der Wanne hängen bleibt und der Roboter problemlos andocken kann. Es kann sein, dass je nachdem wie genau euer…
The model consists of two parts: right foot holding the docking station and the ThinkPad left foot which attaches to the thinkpad only The right foot has a hole to access the power botton. The Lock for the key and the Kensington Lock is…
OnShape source: https://cad.onshape.com/documents/d7e86030572b435333e6eb01/w/3a33073424f9de48ffc5a7ec/e/f06d50deb0a5f89e806c2d42?renderMode=0&uiState=64e0b62e7949c81d65b75c98
This is a support block for a Dell USB-C docking cable with a Dell Latitude 7410 laptop. Tested with Dell WD19 and K17A USB-C docking stations. The block prevents downward strain on the USB-C cable, reducing stress on the USB-C port in…
UPDATE 18.08.2022 Added a slider compatible with the Steam deck TPU cover, with it the deck fits so nicely in the dock that no clamp or guidance clamp is needed. Check Pictures and video below to see what type of tpu case/sleeve is neede.…
For some time I wanted to remove the docking arm of my Bowers and Wilkens Zeppelin Air, because I am not using the old 30pin connector for Ipods. Instead of that I am using Apple Airplay or the AUX connector. If you remove the arm, you…
A colleague asked me to design a space-saving mount for his new docking station (Dell Business Dock WD15 ). I made a model that can be simple put on the monitor stand (Dell 24 Monitor, P2419H) and does not limit the vertical movement of…
The dell Precision 7750 have a quite vunerable usb-c docking. This is a tpu support to release the strain of the connection.
A holder for Legion Go 2, which can include a 90-degree USB-C adapter, to connect Legion Go 2 to a docking station via the bottom port. USB-C adapter used: USB C 90 Degree Adapter USB-C 4.0 40Gbps PD 100W 8K 60Hz Male to USB-C Female…
Modular Steam Deck Docking Station This is a Docking Station for the Steam Deck. On back side are grooves which allow you to create your on mounts for 3rd-party docking stations from Amazon, Banggood, etc. Just print the docking station…
Overview This is a custom-fit mounting rack designed specifically for the Dell WD25 Pro Dock . The design is optimized for vertical printing and doesn't required any support. To limit wrapping during the print, I added a slot on the back…
I made my own version of the original model. This is without the watch charging stand. I use it for my OnePlus Nord 3.
It's a holder for the HP G5 dockingstation. It includes a small clip that lets you easily remove the docking station without screws. just press down on the clip to release it. The holder keeps your HP G5 secure while allowing for quick…
This docking station is made for the 3rd party multicharger for DJI Mavic 3 batteries. You can find it on amazon: Lyongtech multicharger for DJI Mavic 3 You can charge 4 batteries same time. But I didn't like the loose cables, so I…
AYN Thor Console Style USB-C Docking Station — Version 3 (ACASIS 6-in-1 Hub Integrated) This is the latest Version 3 of the AYN Thor console-style desktop dock, designed to integrate the ACASIS 6-in-1 10Gbps USB-C Hub with 4K 60Hz HDMI…
The docking station for newer dell notebooks uses two usb-c cables to connect to the notebook. this connection is a little instable. it loses the connection when you touch the cable or the usb plug. This cable support helps a lot to…
To protect the robot from damage caused by sharp furniture legs, I designed a protective ring. The ring is sturdy enough to shield the top and slim enough not to interfere with either the laser sensors or the bump sensors. The rear tabs…
I didn't know how to store this trimmer in my bathroom, so I designed this docking station; I printed mine in PLA 1 year ago.
An help to stand up the Lenovo ThinkPad USB-C docking station - Inside dimensions → 81mm x 31mm - Outside dimensions → 120mm x 35mm I don't know if this works with every Lenovo ThinkPad USB-C docking station. I test it with the Gen2 Type…
This is an under-desk mount for the Anker 778 Thunderbolt 4 Docking Station . Print it on its front to orient the layers for strength when mounted; no supports are needed. The holes are sized for M3 wood screws, or you could use Command…
I needed a place to store that ugly docking station. So I made one for the Thinkpad USBc dock. You can mount it under your desk, with double sided tape, Gorilla-tape will work fine. There are two options, one with a full cover, and one…
Recommend using a little hot glue to secure the cable. Is meant for use with offical ROG Ally Docking Cable.
The sissy bar backrest side plate mounting grommet for Harley-Davidson Softail 2018-2024. Please print at least in PETG. ASA or ABS would be better.
Had this Cenxaki dock from when I had an AYANEO Air. The GPD WIN 4 was too thick to fit in the dock but I didn't think it would make sense to buy another dock. Whipped up a rough adapter and it works. Might go back and streamline it but…
Holder for a Dell docking station (D6000). The bracket can be screwed or glued. The docking station can then simply be slid in.
Docking station for iqos (lil solid)
Wall Mount for Dell docking station. Use 2.5M (10mm max) screws for docking station interface. Standard wood screws for wall. Mount to docking station orientation can be rotated 90deg
A nice little mount for securing your Anker USB-C Docking Station under your desk. I used double sided 3M tape to secure
My girlfriend received a dell XPS 13 and a WD19TB dock from her job. The laptop is basically always tucked behind her monitor sitting on its box, connected to her monitors so i made this simple dock to keep both the laptop and the WD19TB…
Nice and clean stand/charging dock for the AMAZFIT GTS. Charging connector is just glued in the stand.
A dockingstation for the Switch lite using the standard switch loading cable and a 90°-USB-C adapter. You need a 90°-USB-C adapter like this. https://www.amazon.de/dp/B0BRCQM9T4?psc=1&ref=ppx_yo2ov_dt_b_product_details (not affiliated )…
Simple and stable docking station. Compatible with Steamdeck, Nintendo Switch and all sorts of tablets. 3D PRINTING SETTINGS Printed sideways, 0.3 layer 10% infill, 2 perimeters. No spupports needed.
I didn't want to throw away IKEA Livboj charger so I made a remix with Magsafe charger and Livboj charger together. Originally from Gary Chan (https://www.printables.com/cs/model/46451-iphone-12-magsafe-docking) You will need upper part…
Tired to plug in two Type-C cables every time to connect the monitor to the docking station? Try this auto-docking hanger, simply slides the MacBook down, and done. Compatible with 2022 MacBook Pro 16", other models may need to change the…
Introduction The new Insta360 Luna Ultra is a fabulous camera with one outstanding feature (other than 33MB stills and 8k video), a detachable screen/remote control pad! To achieve something like drone shots (where there are frequent bans…
The WD My Passport 5TB drives are thicker then the usual 2TB ones. This HDD tray I made for my home DIY NAS project.
Simple docking station for the HP Elitebook 840 G8 14" mounted in a IKEA Kallax. Splitted in multiple parts to fit in my Bambu X1 and better printability. I used this calbe to connect to an USB-C Hub. https://www.amazon.de/dp/B09J8TRLNX
Ready to print, maybe need small clearancing since USB-C cables have tolerances. USB-C Cable to use: UGREEN USB C https://www.amazon.de/gp/product/B07PHQGW6P/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Others may also work but no…
A no-supports needed print to hold your docking station & laptop vertically. This is designed to perfectly fit the dell WD19TB thunderbolt 4 dock, keeping all I/O & air vents clear. It can also support a laptop that's at maximum 23mm…
This is a dockingstation for the iPhone 7 with build in sound amplifyer. The station can be used with oder without a case! Enjoy! Print Settings Printer: anycubic delta kossel plus Rafts: No Supports: No Resolution: 0.3mm Infill: 10%…
I needed a laptop stand with three slots: one for a Dell power brick, a Dell WD22TB4 docking station, and the last slot for a Dell laptop. Printed several of these for my “workstation image bench” to tidy things up and allow for more…
Stand for older Dell docking station WD15
Dockingstation Informations: Width: 80 mm Height: 31 mm Model No. of DS: DUD9011D1
Hi, just a quick design it was in mind for my Samsung note 20 ultra and my fossil watch, but will fit other phones its designed to be a wireless charger which i just dismantled an old wireless car charger and it is just glue gunned into…
You can easily mount IVANKY under a desk or on its side.
for toolchanger Anthead toolhead with more magnets - might have to use a little super glue but works better in my opinion keeps the tools in more stables
AYN Thor "PRO" Mount for UGREEN 6-in-1 USB-C Dock (Custom Fit Console-Style Stand) Turn your UGREEN 6-in-1 Dock into a specially designed docking mount for the AYN Thor PRO with this 3D printed attachment mount. It locks the dock into…
The Otto robot gets a completely new job with this remix: becoming your personal desk assistant. With the Otto DeskBot , the well-known robot turns into a practical smartphone stand and desktop organizer that fits perfectly on any desk.…
In the software world, efficiency comes in the form of saving the user clicks; In the physical product world, efficiency comes in the form of saving the user actions . When it comes to work, I strive to be as efficient as possible.…
Best with 30% infill, latches can be fit into the small space on the top. Messurements are 160,7 mm /76,5 mm/30,3 mm (l/w/h) so could be used for other dockingstation adapters.
