Wyniki wyszukiwania: dreame

Sortowanie

178 modeli

P
Printableszeropt

Hollow Knight Dreamers Clips

These are small printable masks of Monomon, Lurien, and Herrah from the game Hollow Knight. They were designed to clip onto straps like those on backpacks. Each mask is a two-piece print. I printed the masks in white and the clips in…

Pobrania
1115
Polubienia
305
Ocena
4,67
P
PrintablesBastian

Xiaomi Dreame XR / V10 Accessory Holder

The Dreame comes with more accessories the base station can fit - these screwable holders allows to store all of it.

Pobrania
460
Polubienia
56
Ocena
5
P
PrintablesTruepaint

Mova/Dreame reusable dust bin (No filters needed)

Upgrade your Mova P10 Pro Ultra with this custom 3D-printed dust bin , designed for enhanced durability and a perfect fit. This innovative bin eliminates the need for disposable bags , offering a more sustainable and cost-effective…

Pobrania
457
Polubienia
117
Ocena
5
P
PrintablesD.Ebi

Wall Mount for Xiaomi Dreame Accessories

Most Dreame vacuum cleaner come with 4-6 accessories. To tide up the cabinet I designed a 3 slot wall mount. This can mounted using screws or double sided tape. It can be extended to get 6 slots. Its possible to place it next to each…

Pobrania
394
Polubienia
41
Ocena
4
P
Printableshvdzasaur

Xiaomi Dreame D10+ Robot Vacuum Reusable Dustbin

The Xiaomi Dreame D10Plus has an auto-empty base-station which uses one-time use, throwaway dustbags. I didn't like this because it feels wasteful. Instead I designed a re-usable dustbin that slots in a spare HEPA filter from the vacuum…

Pobrania
336
Polubienia
73
Ocena
4,33
P
PrintablesZorin

Xiaomi Dreame Vaccum Accessory Holder

This is an accessory (additional brushes) etc. holder for the Xiaomi Dreame V9 vaccum cleaner. (It possibly also fits to V9P and V10, but I cannot verify). As I think the original charging cradle does not provide enough slots, I designed…

Pobrania
311
Polubienia
22
Ocena
4,33
P
PrintablesDmK

FlashForge Dreamer: OmniStand Stands and Locks. Part 1 of 2.

Part 1 - Stands and Locks. For Part 2 - Rods and Spacers, see: https://www.printables.com/model/328943 These are my improvements for the ingenuous OmniStand v1.36 by Baron Williams - the replacement stands and rods for the FlashForge…

Pobrania
287
Polubienia
15
Ocena
0
P
PrintablesVincent Cordier

Funnel for Dreame l10s ultra

can be printed in PLA or PETG with 0.2mm layer height profile 2 or 3 perimeters. Make sure you use soap for robot cleaners. Follow the instructions in the pictures. I used my finger nail to remove the cap only the first time is difficult.…

Pobrania
285
Polubienia
50
Ocena
5
P
PrintablesJack

Dreame vacuum cleaner wall mount

Original holder was shitty for our needs so designed version that holds vacuum cleaner hanging in wall. Also designed holders for nozzles for easy access

Pobrania
273
Polubienia
25
Ocena
0
P
PrintablesDmK

FlashForge Dreamer: Upgrades and Ideas

“The known is known to few…” Sit down, my children, and listen to a story from an old, old 3D maker, who lived at the time when Makerbot printers were open source and abundant, and Thingiverse was a website made by the people who loved…

Pobrania
265
Polubienia
24
Ocena
0
P
PrintablesLami

Dreame A1 A1 Pro A2 Mähteller Hex / disc blade hex (Mova 600 Mova 1000)

Deutsche Version Mir waren die drei Messer des Mähroboters sowohl zu wenig als auch zu teuer. Daher habe ich dieses Bauteil entworfen. Nach mehreren Testdrucken ist der Mähteller nun fertig und passt Plug & Play, ganz ohne Anpassungen.…

Pobrania
233
Polubienia
24
Ocena
5
P
PrintablesDmK

FlashForge Dreamer: OmniStand Rods and Spacers. Part 2 of 2.

Part 2 - Rods and Spacers. For Part 1, see: https://www.printables.com/model/328497 These are my improvements for the ingenuous OmniStand v1.36 by Baron Williams - the replacement stands and rods for the FlashForge Dreamer printer. Think…

Pobrania
196
Polubienia
10
Ocena
0
P
PrintablesLukasz Filipski

Dreame V12 Multibrush Extended Tube Wall-mounted Holder

Since the original docking station doesn't have enough space for all tools supplied with Dreame V12 cordless vacuum, I designed a small wall mounted bracket to hold the extended tube with the multibrush attached to it. Mounting to the…

Pobrania
187
Polubienia
31
Ocena
5
P
Printablesmystydog

Give your Robot Vacuum or Mop a Name Label. For any make, Dreame, Roomba, iRobot ect. 12 Names

My Dreame Vacuum is called Meryl Sweep. What do you want to call your's? Dustbin Timberlake, Dusty Bin, Dirt Vader? My Dreame Vacuum is called Meryl Sweep. What do you want to call your's? The names that I have made so far are below. If…

Pobrania
181
Polubienia
108
Ocena
5

Flashforge Dreamer - Side loader Filament Spool Holder (third party spools)

We use a lot of different filaments when printing with our Flashforge Dreamer machines, and so does you probable, otherwise you wouldn't search for this? I created this holder to help me solve the issue of other filament spools not really…

Pobrania
177
Polubienia
6
Ocena
0
P
PrintablesCarlos Oliveira

Robot Vacuum Aroma Holder (Dreame)

Upgrade your robot vacuum with this simple but effective 3D printed add-on! This holder was designed to attach easily and carry a small aroma bottle, leaving your home not only clean but also pleasantly scented while the vacuum does its…

Pobrania
176
Polubienia
170
Ocena
0
P
PrintablesByzuch

Dreame T10 Multi-Brush Clip

Spare clip for T10 brush

Pobrania
171
Polubienia
17
Ocena
0
P
Printables3D Galaxy

Multiplicateur Accesoires Dreame V12

Multiplicateur d'accessoires pour support mural Dreame V12 ou modèle ultérieur, permet d'ajouter des emplacement supplémentaires de rangement au support original

Pobrania
168
Polubienia
11
Ocena
4,33
P
PrintablesReudiga

Dreame Abflussschlauch an Siphon Geräteanschluss

Dieser Aufsatz passt auf den Geräteabfluss/Anschluss an einem Handelsüblichen Siphon. Der Abflussschlauch vom Dreame, für den Festwasseranschluss, passt exakt in die Öffnung. Mit etwas kraft reindrücken, aber aufpassen das man den…

Pobrania
166
Polubienia
19
Ocena
0

Пылесос Dreame T10 и подобные, ремонт шарнира щетки.

Какое то время мучился с этим шарниром. Сначала начали выпадать маленькие внешние заглушки, пытался их клеить и суперклеем и на двухкомпонентный poxipol, всё равно всё вылетало, терлось. В итоге выломались и внутренние части шарнира и…

Pobrania
165
Polubienia
20
Ocena
5
P
PrintablesFubuki Lab

Flashforge Dreamer 80mm fan mount and Exhaust vent to 100mm vent adapter

80mm fan can mount on the outside of the Flashforge Dreamer and can connect to the 100mm vent. Flashforge Dreamerの外側に80㎜ファンを取り付けることができます。 内蔵ファンを取り外し、内側からM4ねじで固定してください。 Print Settings Printer Brand: FlashForge Printer: Dreamer Rafts: No…

Pobrania
165
Polubienia
35
Ocena
0
P
PrintablesMax Mustermann

Dreame R20 Wallmount

Needed some additional wallmounts for the accessories. Does klick in, just like the original ones.

Pobrania
155
Polubienia
16
Ocena
0
P
PrintablesTomasz
Pobrania
146
Polubienia
13
Ocena
5
P
PrintablesStadi

Messerteller / Disc Blade für Dreame A1 pro

Da mir die originalen drei Messer zu wenig waren habe ich diesen Messerteller entworfen. Als Messer finden die gängigen Messer für Husqvarna/Gardena Verwendung. Der Teller hat im komplett bestücktem Zustand ein Gewicht von 116g und ist…

Pobrania
143
Polubienia
12
Ocena
5
P
Printablesfelixmxr

Parabolic antenna reflector for Potensic Dreamer

Parabolic antenna reflector for the remote of the potensic dreamer pro. I dont think it works for the potensic dreamer 4k, which uses the phone's wifi. I use sticky spray and aluminum foil as seen in the picture. I reached the 2000m…

Pobrania
133
Polubienia
15
Ocena
5
P
Printablesdonpanic

Dreame R20 Vacuum Cleaner Clip

The pipe clip is oversize to accommodate a rubber liner to avoid slipping along the pipe.

Pobrania
128
Polubienia
25
Ocena
0
P
PrintablesA.D.Chonka

Dreame Z30 Top-Holder for accessoires

This is a simple accessoires-holder for the Dreame Z30. Screw it under some shelf or something similar.

Pobrania
126
Polubienia
12
Ocena
5
P
PrintablesRi3del

dreame tool mount (DUAL & SINGLE)

The wall mount for my Dreame XR has not enough place for all tools ... so I made this Thing here. Hope you like it. It can be mounted upside down, too. Please share a photo of your print! :) P.S.: 30mm between the screw holes Die…

Pobrania
124
Polubienia
20
Ocena
4
P
PrintablesBigBoyBob

Dreamer NX Spool Holder

External spool holder/mount for the FlashForge Dreamer (and Dreamer NX) and Dremel 3D20.The clips will fit in any of the vents on the sides or back and holds just about any spool. I only tested 1Kg spools, but it is plenty strong enough…

Pobrania
121
Polubienia
4
Ocena
0
P
PrintablesTekti

Xiaomi dreame broom holder

Additional Xiaomi dreame broom holder when there is no space to mount it normally

Pobrania
120
Polubienia
18
Ocena
5
P
PrintablesDreptschar Lp

Dreame Vacuum Bag Emptying Adapter

A simple adapter that lets you empty Dreame auto-empty vacuum bags using a normal household vacuum cleaner. Just clip the flat side into the bag’s connector and attach your vacuum to the round port. Turn it on, empty the bag, and reuse…

Pobrania
110
Polubienia
28
Ocena
0
P
PrintablesLaird Popkin

Minion Dreamers

What do Minions dream of? Print these 'Crackers' and find out. Instructions Print these at 0.3 mm layers. The default 'low (faster)' setting in MakerWare works fine. After they're printed, you can crack them open at their belt line. If…

Pobrania
110
Polubienia
5
Ocena
0
P
PrintablesBastian

Xiaomi Dreame XR / V10 Accessory Lock Clip

The lock clip of on of my Dreamy accessories broke, so I designed and printed a replacement part. For better stability I used PETG instead of PLA. Enabled “Support on build plate only” when slicing with PrusaSlicer. I used “0,2mm Quality”…

Pobrania
105
Polubienia
10
Ocena
5
P
PrintablesTwinForce

Dreame X40/L40 - protection ring sensor/docking compatible | Schutzing Sensor/Docking Kompatibel

To protect the robot from damage caused by sharp furniture legs, I designed a protective ring. The ring is sturdy enough to shield the top and slim enough not to interfere with either the laser sensors or the bump sensors. The rear tabs…

Pobrania
102
Polubienia
29
Ocena
0
P
PrintablesLukaskun

Dreame L10s Ultra heat Gen 2 tools storage

This tools storage allow you to store a brush, an empty bag, the cleaning tool and an other place for accessories as the tricut spare brush. To fix it, i used 3M Strips to avoid to drill holes in the vacuum station. Print it upside down…

Pobrania
102
Polubienia
50
Ocena
5
P
PrintablesJura Švébiš

Dreamer Fox

Dreamer Fox

Pobrania
92
Polubienia
21
Ocena
0
P
PrintablesMarcinLfr

Dreame T20 adapter for nasal aspirator

This is a simple adapter made for Dreame vaccum cleaner with internal diameter of 30mm. It was made so that my kid's nasal aspirator can be connected to it.

Pobrania
92
Polubienia
6
Ocena
5
P
PrintablesRi3del

Dreame XR HEPA Filter Cap

Unfortunately, most replacement filters are supplied without lids. Here is the replacement for it. Die meisten Ersatzfilter werden leider ohne Deckel geliefert. Hier ist der Ersatz dafür.

Pobrania
91
Polubienia
12
Ocena
5
P
PrintablesDmK

FlashForge Dreamer: Lid Risers

The corners can be either clipped on or secured with M3-0.5 x 20 mm socket head machine screws. I have them secured. If you decide to secure them, you need to buy the screws, but no new screw holes are necessary: the screws will use…

Pobrania
90
Polubienia
3
Ocena
0
P
PrintablesSebastian

Dreame W10 Wasser Tank Verschluss / Dreame W10 water tank cap.

Als Ersatz für beschädigte oder abgerissen Verschlüsse an den Wasserbehältern. Auf der Seite liegend drucken mit Support. As a replacement for damaged or torn seals on the water containers. Print it sideways. Nearly every quality does its…

Pobrania
88
Polubienia
12
Ocena
5

Reinforcement connection vacuum cleaner dreame or xiaomi

After buying a replacement, I noticed that the tube breaks at the connection, so I made the attached piece to avoid this breakage in the tube. It is suitable for the dreame v9 -v9p vacuum cleaner and also the xiaomi, check measurements…

Pobrania
85
Polubienia
13
Ocena
5
P
PrintablesCozyCraftStudio

"The Dreamer" - Cozy Zen Planter & Decor

☁ The Honest Shelf Vol. 64 // "The Dreamer" ☁ Meet your new favorite zen companion—designed to bring a touch of peace and a big smile to your favorite space! 🧘♀✨ I designed "The Dreamer" because I wanted to create more than just a…

Pobrania
83
Polubienia
21
Ocena
0

Xiaiomi Dreame V10\G10 Gear

Spare part for the Xiaomi vacuum cleaner brush. Drive gear for the HTD belt. I printed with PLA+, I don't know how long it will work ;). It fits tightly onto the axle - requires some persuasion ;)

Pobrania
83
Polubienia
7
Ocena
0
P
PrintablesTom

Dreame L10s Pro Padholder

Update: Created a holder ring which is easier to apply. You can use your 3d printer pliers to press the rings on the base. --- Hello, I had the problem that the wiper pads on my Dreame L10s Pro would detach from the Velcro holders after a…

Pobrania
80
Polubienia
11
Ocena
5
P
PrintablesFC2M3D

DREAME adaptor for AQUAPUR Attachment (Remix)

I had this AQUAPUR adaptor for quite some time, but doesn't fit on my DREAME XR vacuum cleaner. So I remixed design from 3D Galaxy . I printed in PETG Infill: 30% or 40% Layer Height: 0.20mm Supports: Yes, organic If you like my work…

Pobrania
79
Polubienia
11
Ocena
0
P
PrintablesDmK

FlashForge Dreamer: X-axis Motor Wire Clip

FlashForge Dreamer X-axis wire clip. The clip could be held just by pushing it onto the inside rib of the FlashForge Dreamer body, but I felt that since the X-axis motor wires move constantly, the clip deserved a more secure attachment.…

Pobrania
77
Polubienia
5
Ocena
0
P
PrintablesZuidersma

Dreame D10+ dustbin mod

Dustbin mod for Dreame D10+. The hole of the original model did not align in my Dreame D10+. I just reprinted the flange and glued it on.

Pobrania
72
Polubienia
13
Ocena
0
P
PrintablesJohnDoe

Xiaomi Dreame Brush Lock / End stop

Printed in pla with 50% infill.

Pobrania
71
Polubienia
8
Ocena
5
P
Printableslala-man

DREAME ramp

My floor is 12mm higher at the wall side of the base-station. So water stays in the bottom of it. I used some isolation-foam to bring the station into level. The ramp helps the rover to climb the edge. One blank version and a second which…

Pobrania
69
Polubienia
13
Ocena
0
P
Printablesmackoj

Dreame long narrow nozzle

Long version of the original Dreame nozzle - to fit into my car seat mounting :)

Pobrania
69
Polubienia
9
Ocena
0
P
PrintablesBecker Thorne

I NEVER DREAMED I'D GROW UP TO BE AN ***HOLE BUT HERE I AM KILLIN' IT SIGN

I NEVER DREAMED I'D GROW UP TO BE AN***HOLE BUT HERE I AM KILLIN' IT SIGN Category: Signs & Logos

Pobrania
65
Polubienia
11
Ocena
0
P
PrintablesRomanscan
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
63
Polubienia
21
Ocena
0
P
PrintablesHomee

pipe dreamer

This 3D model represents a fun "pipe dreamer" character inspired by a famous plumber. It comes in a single-color version , so you can enjoy painting it with acrylics, markers, or an airbrush – a great creative activity to do with kids.…

Pobrania
61
Polubienia
8
Ocena
0
P
Printablesjulgoe

Dreame vacuum brush arritation replacment

This is a replacement for the 2-in-1 brush nozzle on my Dreame V9

Pobrania
59
Polubienia
7
Ocena
5
P
PrintablesMarcin Kargula

Xiaomi Dreame Vaccum Accessory Holder P T 10 20 30 PRO wall mount

PL Model uchwytu do akcesoriów odkurzacze Dreame Xiaomi T10 20 Kompatybilny z innymi modelami tego producenta Uchwyt do montażu na ścianie / płycie. Odsuniety od ściany w celu łatwego montażu rury z założoną szczotką. Dedykowane miejsce…

Pobrania
58
Polubienia
4
Ocena
4
P
PrintablesDaWingla

Funnel for an Dreame vacuum cleaner robot

A Funnel to fill the Watertank of an Dreame vacuum cleaner robot.

Pobrania
57
Polubienia
17
Ocena
0
P
PrintablesGarmor

Dreame L10s Ultra base station ramp

I lost the ramp of the base station of our robot vacuum during a move, so I designed a new one. The ramp is split into two parts so it fits on my print plate. I tried to somewhat copy the existing design, but it is not a perfect copy. If…

Pobrania
56
Polubienia
3
Ocena
5

Dreame accessories wallmount

Optimized Ri3del s model for attaching accessories from below. Recommend printing in PETG. If printing in ABS or ASA, you need to compensate for the shrinkage of the material, by enlarging to model to about 100,4%.

Pobrania
56
Polubienia
9
Ocena
0
P
PrintablesZortraxYeen

Dreame t30/t20 accessory holder w/ two holes

Same as the original, just with a second hole

Pobrania
55
Polubienia
8
Ocena
0
P
Printablesfab_jns

Dreame HairGleam Halter

Halter für Dreame HairGleam, schrauben sind versenkt in dem Halter. Es werden sehr kleine Schrauben benötigt oder man klebt ihn an. Ich persönlich würde Schrauben empfehlen.

Pobrania
51
Polubienia
6
Ocena
0
P

Dreame detergent cap

I broke the little piece of plastic acting as a cap on the original detergent bottles for my Dreame L10s Ultra, preventing them from being refilled. So I designed this little cap, which allows you to close a detergent bottle that has been…

Pobrania
51
Polubienia
13
Ocena
0
P
Printableslookash

Dreame Nasal Aspirator Adapter

This adapter allows you to connect a nasal aspirator (Katarek) to a Dreame vacuum cleaner. By default, the aspirator’s tip does not fit because the vacuum cleaner’s opening is too large. WARNING! AdjustThis is an adapter to the vacuum…

Pobrania
50
Polubienia
6
Ocena
0
P
PrintablesPewpy

FlashForge Dreamer X Axis Carriage (LMU-N8 Bearings)

This is a remix of https://www.thingiverse.com/thing:441035 but uses 4 MISUMI LMU-N8 bearings instead of the stock ones. This was remixed in tinkercad and has not been tested. X axis belt clamp can be found here…

Pobrania
50
Polubienia
5
Ocena
0
P
PrintablesTom_R

FlashForge Dreamer Lid Riser

I made this to lift the lid on my FF Dreamer so the filament would not have to make such a sharp turn at the print head. I used Polycarbonate Clear Plastic Sheet 12" X 18" X 0.0625" (1/16") available from Robosource for the windows so…

Pobrania
50
Polubienia
6
Ocena
0
P
Printablesaweb

Dreame Robot Marble Caster Replacement (Fits L40, and probably L10 Pro L10s Pro X30 Ultra X40)

The front wheel/caster on my Dreame L40 broke in half. Apparently this is somewhat common. After spending 30-45 minutes disassembling it I decided I didn't want to have to do that again if it happened again, so designed this replacement.…

Pobrania
49
Polubienia
18
Ocena
0

Xiaiomi Dreame V10\G10 Gear V2.2

The previous version worked for me for about 2 months. I made a modified project, where the gear wheel is secured with an m4 screw. The gear wheel has a socket for an M4 nut, the screw should be cut to approximately 10 mm, and a slot for…

Pobrania
48
Polubienia
7
Ocena
0
P
PrintablesSWEthink

Anti-Stuck Bumper for Xiaomi Dreame F9 Robot Vacuum

I’ve had problems with my Xiaomi Dreame F9 robot vacuum getting stuck under low furniture like my bookshelf. This bumper is a solution I came up with. It fits snugly on the front brim of the robot and prevents it from going too far under…

Pobrania
46
Polubienia
14
Ocena
0
P
PrintablesMaxi

Forest Dreamer

He can be a gnome or a troll

Pobrania
45
Polubienia
8
Ocena
0
P
PrintablesSkaffen

Dreame R20 dust bin cover

(version Française plus loin) Dreame R20's dust bin cover hinges are rather small and can break off easily. This is a replacement design for the hole cover assembly, except the exterior gasket. If your cover is broken, just take out the…

Pobrania
43
Polubienia
1
Ocena
0
P
PrintablesStadi

Dreame A1 Mähroboter zusatzgewicht

Zusatzgewicht für den Dreame A1 und A1pro. Stehend drucken, für unten wird ein kleiner Support benötigt, im inneren geht ohne. Anschließend wird das ganze mit Beton ausgegossen und ins Heck des A1 geschraubt. Bei mir ergab es ein Gewicht…

Pobrania
43
Polubienia
1
Ocena
0
P
PrintablesDON4IR

Flashforge Dreamer Prusa Mini Spool Holder Adapter

This is an adapter to mount the Prusa Mini spool holder on my Flashforge Dreamer. I needed a better spool holder for my Dreamer. I wanted something more sturdy than the arms that stick out at a right angle. I was familiar with the spool…

Pobrania
43
Polubienia
3
Ocena
0
P
PrintablesBOFH 1337

Dreame V9/V10 HEPA Filter Cap

This is a replacement Filter Cap for the Dreame Hepa-Filters used in my V10 Pro. Printed on the Prusa MK3/S+

Pobrania
43
Polubienia
8
Ocena
0
P
Printablesvitalyqe

Xiaomi Dreame V9 V10 V12 - Reinforced Button for Brush Attachment - Lock Clip - Vacuum Cleaner

Reinforced Spare Button (Clip) for Xiaomi Dreame Vacuum Cleaners (V9 / V10 / V12 etc.) This reinforced, support-free spare clip is designed for FDM 3D printers and fits Xiaomi Dreame cordless vacuum models (V9, V10, V12 and others). Its…

Pobrania
41
Polubienia
7
Ocena
5
P
Printablesragnarokpw

Dreame U20 wall mount

Made a single or double wall mount for attachments for cordless vacuum cleaner Dreame U20 You can turn either wall mount facing either way if you wish to have attachments be top or bottom mounted Both mounts are designed to be printed…

Pobrania
39
Polubienia
3
Ocena
5

Drill Dust Collector for Xiaomi & Dreame vacuums

Orientation: Print in the orientation shown in the image below for the best results and to maintain the snap-fit geometry. Supports: This model can be printed support-free , but requires a 10-15 mm brim for bed adhesion. Walls/Perimeters:…

Pobrania
39
Polubienia
3
Ocena
0
P
PrintablesBishop87

Dreame T20 Pro - Battery Charger Base

Battery charge base for Dreame T20 pro vacuum cleaner , to charge battery in a standalone configuration (without the original stand, that was too big for me). I create a pre-supported version with small wall under the 4 clips, so you need…

Pobrania
39
Polubienia
7
Ocena
0
P
Printablesczrtst

Dreame Nozzle Size Reducer Vacuum Cleaner, Saugdüsen reduzierer

Reduce the wide nozzle of your dreame vacuum cleaner from 17mm gap down to 9mm. With less motor power it get a way more suction power. It has a very tight fit so no need to glue it. Works also very well with the brushes moved forward.

Pobrania
39
Polubienia
8
Ocena
0
P
PrintablesGian_

xiaomi dreame v9p wheels

Now should fit perfectly :)

Pobrania
38
Polubienia
4
Ocena
0
P
PrintablesTjucktjuck

Dreame D10 robot vacuum cliff sensor cap

Caps for the cliff sensors on the Dreame D10 robot vacuum cleaner. Should work on the L10 and L10s models aswell. Update: Redesigned the caps for the front sensors.

Pobrania
38
Polubienia
3
Ocena
0
P
Printablesmcheijink

Dreame X40 filter cleaner for Dyson

I made this adapter to clean robot vacuum filters with a Dyson V15. It lets you vacuum the filter from the clean side instead of tapping it out or washing it. The idea is simple: push the filter into the adapter, connect it to your Dyson,…

Pobrania
37
Polubienia
8
Ocena
4

Dreame vacuum accessories holder

Accessories holder for dreame v11 vacuum cleaner. Dreame v11 pipe is slippery so a little piece of double-sided tape may help to keep the holder in desired place.

Pobrania
36
Polubienia
6
Ocena
0
P
PrintablesMarek Wojnowski

The brush hanger for a Dreame / Mova cleaning robots

I designed this simple holder for the original brush to ensure it is properly stored and ready for use. The model has been printed using white PETG filament, as its color matches the vacuum cleaner housing well. But PLA would be good as…

Pobrania
36
Polubienia
9
Ocena
0
P
PrintablesJack

Dreame R10 vacuum cleaner lid holder

Couldn't find replasement part so made my own Printed in PETG I had to find suitable spring under the holder to make it function properly (bought 200ps spring box that had right spring) Fits and works like original

Pobrania
35
Polubienia
1
Ocena
0
P
PrintablesSHaDoW6

Dreame H12 Pro Accessory Holders

Hi there, I’ve uploaded a small project for the Dreame H12 Pro accessory holders. These holders should also work with other Dreame models that use the same OEM holders. I noticed that the original holders weren’t holding everything…

Pobrania
34
Polubienia
13
Ocena
5

3051_Ruedines xiaomi dreame v9p

3051_Ruedines xiaomi dreame v9p para reemplazar los ruedines del cepillo de la xiaomi dreame v9p

Pobrania
34
Polubienia
3
Ocena
0
P
PrintablesDmK

FlashForge Dreamer: Z-axis Shim

My take on FlashForge Dreamer Z-axis shim. This one is bolted down for stability using two existing M3-0.5 x 8 mm socket head screws. You may need a shim if you increase the thickness of your build plate (for example, by installing a…

Pobrania
34
Polubienia
1
Ocena
0
P
Printablesfloano

Flashforge Dreamer / Inventor Carbon/HEPA filter holder

Simple mounting box for HEPA / carbon filter for Flashforge Inventor and Dreamer. Nice for printing ABS. The size is close to the maximum print size on the Inventor, and bolts directly on the back of the printer. HEPA/Carbon filters from…

Pobrania
34
Polubienia
3
Ocena
0
P
PrintablesAdam Starbuck

Flashforge Dreamer Webcam mount

This is a remix from http://www.thingiverse.com/thing:1897363 because I wanted to use the arms to hold a Logitech HD Webcam C310 on the Flashforge Dreamer. Use M3x20 or M3x15 screws to replace the two screws in the top of the Dreamer and…

Pobrania
33
Polubienia
2
Ocena
0
P
Printablesdonjoe

Dreame L40 Ultra, Vakuum Diffuser

Wird hinten links im Staubbeutel Kabinett, teils vor die Ansaugöffnung gestellt. Soll verhindern das der Staubbeutel die Ansaugöffnung blockiert und die Ansaugleistung schwächt. Vorher bitte messen. Höhe 120mm. Druck Settings. PLA 0.2 mm…

Pobrania
32
Polubienia
8
Ocena
0
P
PrintablesMatt Van Horn

Putty knife holder for FlashForge Dreamer

This holder is custom fit for the FlashForge Dreamer printer. It is designed to fit on the side of the unit where the removable grate is located. Very durable and provides a perfect fit for any bed scraper.

Pobrania
31
Polubienia
1
Ocena
0
P
PrintablesThinkspace

Dreame H12- wall mount for accessories

Dreame H12 wall mount for accessories. TESTED AND OPTIMALIZED HOW TO USE IT: MOUNTING TO WALL FEATURE: Better to use wall mount screw, but generally on the picture you can see version mounted on 3M strong double tape width 15mm and…

Pobrania
29
Polubienia
13
Ocena
0
P
PrintablesSnowHead

Glassbed Corner Brackets for FlashForge Dreamer for 3mm Plates

All found models of brackets for FIashForge Dreamer for 3mm glass plates did not fit on my device. Because the print bed of the Dreamer is wider than the 230mmx150mm glass plates the plates were not fixed safe on the bed and shifted…

Pobrania
29
Polubienia
2
Ocena
0
P
Printableskaa

Vacuum cleaner Dreame Slim+ Add-On Nozzle

This 3D printable model is an add-on nozzle designed to fit the original Dreame vacuum cleaner crevice tool. It enhances the functionality of the standard nozzle and helps achieve better cleaning results in narrow and hard-to-reach…

Pobrania
29
Polubienia
9
Ocena
0
P
Printablesvier2acht

Dreame power adapter holder

Wallholder for dreamme power adapter

Pobrania
29
Polubienia
7
Ocena
0
P
PrintablesEvgeny Sinyaev

Dreame H12 pro

The cross piece of the vacuum cleaner Dreame H12 pro

Pobrania
28
Polubienia
2
Ocena
0
P
PrintablesIchooorrr

Xiaomi Dreame Vaccum Accessory Wall Mount

A wall mount for two accessories, designed similarly to the original.

Pobrania
27
Polubienia
2
Ocena
0
P
PrintablesOCD

Nipples of dreamer - FLASHFORGE

My very first cad / 3d print project from many years ago After watching my new dreamer use the filament through the top holes as a band saw I thought, enough and I raked out a black bush to glue on (see pictures).

Pobrania
27
Polubienia
2
Ocena
0
P
PrintablesT3CHKOMMIE

Dreame Tool Bin - X40 and others

Print upright, no supports. version with divider or version without.

Pobrania
27
Polubienia
5
Ocena
0
P
PrintablesJohann Blunck

Messeradapter für Dreame a3

Messeradapter, um die originalen Messerteller, gegen 20cm Vollstahlmesser zu ersetzen. Der Schnitt wird um Welten verbes

Pobrania
25
Polubienia
1
Ocena
0