145 modeli
OUTDATED VERSION This version is no longer maintained. Please use the current Duender Project: Printables: https://www.printables.com/model/1798903-duender-project-ender-3-to-corexy-conversion https://irbis3d.xyz/ GitHub:…
OUTDATED VERSION This version is no longer maintained. Please use the current Duender Project: Printables: https://www.printables.com/model/1798903-duender-project-ender-3-to-corexy-conversion https://irbis3d.xyz/ GitHub:…
My take on the Duender by Sergei Irbis. This version uses MGN12 linear rails with H size bearing blocks and adds mounting points to use end stops if you prefer those to sensorless homing. For the configuration I used, you will need the…
This is an aesthetic base case for the Duender, with inspiration from Voron. It has 2 fan slots in the each of the side skirts, along with some optional fan spacers if you want to use 2 on one side. There are cutouts on the bottom of the…
https://www.printables.com/model/1174545-duender-2x-creality-ender-3-corexy-convertion Most of the build is the same as the original Duender. Use the Duender STEP file alongside this one to figure out the build. The BOM from there should…
Duender is a modular CoreXY conversion project built around parts from two Creality Ender-3 printers. The original goal was to reuse as many original components as possible and minimize the number of additional parts that must be…
These are electronics mounts that fit in my Duender Base Case . Currently there's a mount for a Raspberry Pi, an ender 3 control board (or anything that with the same form factor) and a mount for the ender 3 power supply. If you have cut…
A simple z motor spacer for the Duender if you want to avoid cutting your leadscrews, its 14mm and works to space the leadscrew enough to avoid hitting the nozzle on most toolheads. It works with my base case and base electronics mounts .
I had a ender 3 pro, not an ender 3, well i should say two ender 3 pros instead of 3s, but anyway, i wanted it for a pro version, and the remixes availble are not helpful, or are not the full files, so i present my full pirnter in cad,…
Just a plate to adapt the Dragon Burner v8 toolhead to the Ender 3 with paths for belts on a DuEnder
This is my version of an AWD DuEnder. The rails are all MGN9. When I get the chance, I will update this description with a parts list of used hardware to assemble, but most everything is an M3 bolt ranging from 5mm up to 35mm. Print…
The Duender SB Mount Plate should be printed with ABS or ASA (I suppose most filaments should be fine) 40% infill 4 walls 0.2mm layer height 0.4mm extrusion width 5 top / bottom layer (Aka Standard Voron Settings) Requires 9x Voron…
Note that the X limit switch is triggering on the extruder body, it was designed for use with a stealthburner extruder, if you can a different extruder you will need to verify that it triggers on the extruder, and please do so before you…
The 4040 Extrusion X Mount should be printed with ABS or ASA (I suppose most filament should be fine) 40% infill 4 walls 0.2mm layer height 0.4mm extrusion width 5 top / bottom layer (Aka Standard Voron Settings) Important Note on the…
updated my previous remix to the new model
Another remix for the electronics box. Most of us have spare MCU laying around. This box holds 2 Ender 3 MCU ( or same hole pattern) allowing you to designate the 2nd one in Klipper and use it for the Z access control. Doing so will allow…
Printed at 100% infill 3-4 walls in ABS when assembling x axis gantry put this plate on top of it and thread the bolt through this and the aluminum plate after connecting and stringing belts
tweaked to fit the grooves of the Y gantry.
A remix of the DuEnder build plate carriage to allow the use of the common open build 2020 plate. ( as pictured in gray) I recommend connecting to the carriage with 4x M5 x16 Pan head bolts w/ lock nuts
Integrated belt tensioners/Medusa HC mount for the Duender and Medusa HC hotend changer by Sergei Irbis. Replaces the stock tensioner from the MGN9H Pins version and the Medusa HC mounting. No more glue!
Print in ABS OR PETG 3-4 walls at >20% infill no long a need for bottom 5m bolt connected to the aluminum plate
Allows for a length of MGN12 rail to be used instead of cutting a 2020 extrusion down for the X gantry. Up to 3 mounting points are available each side for mounting the rail, and 2 points each side you mounting onto the Y carriage. My…
Uses F695-2RS Bearings Now added a MGN9 Version with all M3 bolts thanks to SlickChris from Discord! Also added a roller version with all M3 bolts.
I did not like how the original frontmounts looked, so I decided to redesign them. You don't need to change anythig of the original parts, they are “plug and play”, just 2 more m5x8 screws are needed. My 4040 extrusions are about 20mm…
The Dutrident Z-axis was designed to easily and cost effectively add 3-point bed leveling to your Duender. This setup improves repeatability and stiffness of the Duender's z-axis reducing z-axis wobble but most importantly allows for…
I printed out the original box before checking and the mounting points were to close to the wall to match the 3b+. So a few hours later I made my own and added mounts for a DC voltage converter if you want to run the Pi off of the 24V…
This is the mod I first started working on. I was looking for options not to have to buy a sheet of aluminum then drill and cut the plates. I used purchased open-build plates for the Z axis, but this doesn't work for the X gantry. I…
This is a bracket used in conjunction with the original Creality Sprite mount. You will need to cut the x-axis end stop tab. Print: ABS 50% infill or more 3-5 walls 4 heat insets required for belt tabs I used M4
This is a Klicky dock mount for the Duender , I am using it with PCB Klicky on an Xol toolhead. In the files I have included an unmodified file from Better Dock for the PCB Klicky Probe , but it should work with the og Klicky Dock as…
The extrusionless gantry for the duender was already a great idea by Shobei, unfortunately it won't work with the current Version of the Duender, since it needs the grooves for the 2020 Profiles. SlickChris remixed the gantry but there…
This project contains a re-design of the motor mounts from Andizzle, however adds 8mm to the deck height to make them compatible with the MGN9 Duender project. Redesign outer shape to provide better access to belts and pulleys. Bolt hole…
Motor Mounts MGN9 Extended This project takes my previous MGN9 Motor Mounts project and moves everything further back to allow more Y axis travel. You will probably want to have 320mm rails (get 350mm rails and trim 30mm from it with an…
I had a lot of trouble getting the idler & spacers installed in the belt tensioner for the DuEnder, so I created this jig that makes that process much much simpler. You just set the jig into place, drop in your idler, then put the spacers…
Integrated belt tensioners/Medusa HC mount for the Duender and Medusa HC hotend changer by Sergei Irbis. Replaces the stock tensioner from the MGN12H Pins version and the Medusa HC mounting. No more glue!
This is a modified electronics books to be able to Mount the Manta E3 EZ control board.
I highly advise you print in petg or abs at 100% infill to avoid instability
A remix of the Klicky Probe mount for the Voron 2.4 to adapt it for use with the Duender Medusa HC by Sergei Irbis.
This is an arm to hold the Bambu nozzle brush for use with the Duender. It is meant to go with the side mount bracket from the DuEnder MGN9H's Extras folder
I didn't liked the idea of visible split in the front skirt - so I've made this remix. Now the emblem is seperate part prepared for gluing into made space. I'm waiting for material spool to print it myself - so untested how well will it…
What is this? This is a mod that allows you to use 20-tooth idlers instead of 16-tooth idlers (or flanged bearings) on your Duender. Maybe you have some leftover, maybe you just ordered the wrong ones like me :-D And it replaces the big…
Simple extrusion mounted umbilical + ptfe tube holder for the duender. Use with PUG cable strain relief https://www.printables.com/model/378567-pug-parametric-umbilical-gland
A very oversized (and strong) Z axis mount
Reuse an Ender endstop for your Duender y axis: use the printed part to mark and drill (optionally tap or install heatset inserts) the top of your left (or right) motor hold bracket for 2 M3 screws use M3 hardware to loosely mount the…
Just extra rigidity for the frame, and it looks cool imo lol. Just mirror along X axis for opposite corners. I personally printed it with 6 layers %70 gyroid infill.
This is designed for a stock Duender with a Z spacing of 97mm. Feel free to chop it up and make it yours however you see fit.
the z motors have a bit of flex in them which i think is causing some Z banding, so i designed this to help with that.
X Mount MGN12 This mod is for Duender MGN9, however it confusingly supports an MGN12 rail on the X axis. Doing this expands the toolhead options as effectively any Voron toolhead will simply fit as-is. I have a StealthBurner on mine, and…
A rear mounted aux part cooling for for the Duender. 2 versions included, one for nozzle height for the dragon burner and one designed for the original CAD of the Duender. The fan i used in the model was a Axial 6015 fan but you can adapt…
personally printed 7 walls %70 infill ABS
Here is a Klicky dock mount for Duender and Duender MGN9 edition. This is spot on for my setup, using Xol toolhead in both cases. I'm using a pair of screws and ship nuts through the top slotted holes for mounting, with the option to use…
Currently working on building my Duender. Found this base case, but was planning on using a Octopus V1.1, so I remixed this to fit. It should still work with @The_Creator_2380541 original spacer. You'll need Ruthex M3 Voron heat inserts…
This is a carriage mount for the Dragonburner with belt path cutouts that are specifically for a raised version of the DuEnder belt paths This will need the toolhead plate template from the project below to put the slots in the right…
same directions as MGN12 mount for the Creality Sprite Pro Extrude add 2x m3 thread inserts and screws for belt retainer I wanted this so I figured other people might want it too so here it is I am unskilled and doing the best I can so…
This electronics box will allow you to add a 2 or 3rd MCU to your DuEnder. It is compatible with both the single or my double MCU box. I have not printed it myself yet so if there are any errors please let me know.
This is my take on a toolhead for the Duender. It uses an H2 V2S Revo extruder from Biqu and takes inspiration from the EVA 3 system for wrapping the assembly around the gantry and placing the part cooling fan on the back. This toolhead…
If you find yourself wanting to build a Duender with MGN9 rails and 4040 y extrusions, but instead of running the MGN9 y rails in the inner v-slot you need them to run in the outer v-slot, these mounts are for you. Build the frame as per…
An LED Light Bar for the DuEnder. Mounts along the side of the 2040 Extrusions used for the Y axis. Will only work with DuEnder projects that use linear rails. Mounts to the 2040 extrusion using three M3 bolts and t nuts. It has holes on…
The Duender logo by @coldstorm as an STL, so that you can include it in your designs where you see it fit :-) It's centered on the origin, so you should be able to easily place it wherever you want and scale it to size. The original logo…
I recommend using ABS, ASA or at least PETG. You need to cut the tap which hits the endstop from the original mounting plate. Installing is also very simple. Screw the printed adaptor onto the linear carriage using m3 screws. Now bolt the…
Had extra 300mm extrusions, put them to good use.
Made this for the SK3, but should fit most regular sized skr board with the same mounting pattern such as a V1.4 It's a direct remix of the original Ender control board mount, it has the same bolt pattern for the mounting points to the…
I printed this in ABS .6 Nozzle DuEnder Printer 270 degree nozzle 90 degree bed PEI build plate
There is a gantry plate for an MGN12C and MGN12H linear rail The ABL mount and the fan duct plate are slotted for adjustability. The ABL mount is designed for a CRTouch, unsure if it works with a BLTouch. There is an optional mount for a…
Add a adjustable stock limit switch to the Y motor bracket You need 2x M3x5x4 heatinsert and 4x M3x12 screws+bolts to mount the Ender switch to the Y motor bracket/holder. The switch gets triggerd by the extrusion
EMS Panel [Edit: The overall dimensions of the panel have been adjusted to give a better fitment. The original version was too tight, although with some effort it could be forced into place. I have also extended the tabs so that they bolt…
A somewhat lazy take on a top plate for the DuEnder base case. The lid it 330mm on it's largest side, so it'll require a large format printer to print whole. I imagine it would be fairly simple to break it up into parts and glue it. I…
Simple remix to allow for 20T toothed idler on the front side of the XY Joints of the pins version. M5 pin x 30mm. UPDATE 7/26: Fixed MGN12 Carriages
This is a webcam mount primarily made for the DuEnder project. The reason I made it is because with this form of CoreXY printer, I was having trouble the webcam shaking violently during printing, causing bad video quality. This mount…
This is a Trident alternative mount for the Dragonburner to fit the Duender. And a stopper that mounts on the X Right Mount. Extra Hardware: 1 x M5x16 Hex Socket screw to mount the stopper 2 x M2.5 x 20 to mount the switch to the mount
I needed an extended 4040 top mount for the z axis. Uses 4 M5's and t nuts to mount and 1 to screw into the extrusion. If you're feeling generous: https://buymeacoffee.com/lascius3d
I had great success with the original gantry plate on my Ender 2 Pro, and when building the Duender I wanted to go with the Dragon Burner. The original model was modified to allow for the belts to wrap around the modified Extruder plate.…
Modified the bed holders to fit the Ender 3 Max If you're feeling generous: https://buymeacoffee.com/lascius3d
I modified the motor mounts to use 2 30mm pins (4 total) instead of bolts, on spec with the modern duender.
Sometimes the hotend wires rub against the rear span of belts, so I made this to protect the belts. This mounts to the rear horizontal extrusion of the Duender with 3 M4 bolts, washers, and T nuts.
Can fit on the duender just remove the M3 bolts closest the to large bolt holding the old ender ther x/y axis pulleys.
Print in any filament no supports slowly and have maximum cooling
These tensioners just add a bit of clearance for the belts and toolhead no supports are needed
Base Case Cover for the Duender MGN12H Edition . Panels are fixed together using brass threaded inserts and M3x12 Screws
My project was an Ender3, and an Ender3 v2. One of them came with larger rubber feet with dimensions approximately of 39x19.6x12mm. Additionally, I didn't want to cut the threaded rods. I used the Duender Z Motor Spacer found here:…
When I was putting my DuEnder together, I wasn't ready to commit to buying rails, but I wanted to have the option to do so later.... I looked through the differences, and the only real issue is the height of the belt path, which shifted…
Printed with 5 walls/layers at 100% infill, but that's probably overkill. Prints on any side without supports.
One 80mm fan to cool the boards instead of two 40mm fans. Makes it way quieter and pushes more air.
This project contains a re-design of the front tensioner housings from Sergei Irbis, and they re-use the stock pulley holder inserts. The main change is that it uses the M5x45 and M5x25 bolts from the Ender 3 (you need to tap your threads…
I modified the Raspberry Pi mount for the Duender Base Case to fit the holes of the BigTreeTech Pi v1.2. So if you need that specific model, here you go.
decided to mock this up as a potential future project to make use of misc parts left over parts from other projects. the motors petrude a bit further back as I have used added 400mm extrusion and longer rails for y axis, not only to make…
Motivation The Duender belt tensioners are a little fiddly to assemble. The original Ender3 does not include proper belt tensioners, but the V2 does. (And probably later versions as well.) So why not just re-use them instead of creating…
Version 2: Added a version 2 because i felt like it wasn't secure enough on the extrusion. I added a spot for an M5 screw and t-nut on the top to attach to the 4040 extrusion. Remixed the original Wider Duender motor mounts for 4040 y…
Duender Front mounts for 4040 Extrusions (Mirrored Remix). My Linear Rails are on the outside of the 4040 Extrusion so i mirrored the original stl to accommodate for this.
I decided to remix KiLLiE's Z mod for MGN12H and ended up making a few more adjustments: Raised carriage for more z height Kept the original offset from duender project Reinforced some parts and changed minor details for better fit and…
I released the Backpack Assembly STEP file in a "good enough" state. I don't have the time to refine it further or add more features, so I'm sharing it as-is for anyone who wants to remix and improve it as they see fit.
Overview This Electronics Backpack was designed to provide a neat, fully-enclosed, and modular electronics compartment for the Duender 3D printer frame. It fits entirely within the natural shadow/projection of the A/B motor mounts…
These are 4040 Extrusion Mounts that are compatible with the changes I made for the Wheeled Hybrid Model below.
When building my duender, I was using 3/16 plate for the Y axis instead of the 1/8". Thats about 1.59ish millimeters, and due to that it doesn't reach the bed as it is. This lowers the entire dragonburner mount down by 3mm. Apologies for…
See here for the HULA Voron project HULA project does not allow remix so I can't mark as a remix. I did not modify any HULA design parts, but I did remix the Voron base plates, the STEP files for which are provided in the projects for…
I made this since I was on a budget for building so i wanted to reuse te stock ender 3 extruder without the Bowden to make the extruder basically free. THIS HAS NOT BEEN TESTED, and I do not plan on testing it. Bom: Some extra m3x8 and…
Alternative Base Bin for Duender - Medusa HC uses a magnetic base with different mounts/chutes. Uploaded the steps in case anyone wants to make their own. If you're feeling generous: https://buymeacoffee.com/lascius3d
So, you built your Duender from one or more Ender3v2 or later and want to use the slimmer PSU, as well as the split power switch + outlet combo, but you don't want to shock yourself when touching it in the wrong spot? Then you've come to…
Adjustable Klicky Dock Mount Designed for the MGN12 Duender project, this mount supports the Dragon Burner/PCB Klicky toolhead configuration. Mounting: Adjustable M5 slots for 2020 extrusion (T-nuts). Compatibility: M3 slots for standard…
My remix control knob for good grip and logo :D
